Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.0 LAccepted-AOC | ₹28.0 L Quoted ₹29.2 L | L1 | Accepted-AOC Being L1 bidder |
| 2 | L2₹32.9 L+₹3.8 L (12.9%)Rejected-Finance BRAJANATHCHAK TOWNSHIP HALDIA HALDIA HALDIA | MEDINIPUR EAST | WEST BENGAL | 721605 | ₹32.9 L+₹3.8 L (12.9%) | L2 | Rejected-Finance Being other than L1 Bidder |
| 3 | L3₹35.0 L+₹5.8 L (20.0%)Rejected-Finance H NO 411 SECTOR 4 CHANNI HIMMAT JAMMU 180015 J K | JAMMU | JAMMU | J K | 180015 | ₹35.0 L+₹5.8 L (20.0%) | L3 | Rejected-Finance Being other than L1 Bidder |
| 4 | L4₹36.6 L+₹7.4 L (25.5%)Rejected-Finance MURSTEY COLONY PLOT NO 16 LEH 194101 LADAKH | LEH LADAKH | LADAKH | 194101 | ₹36.6 L+₹7.4 L (25.5%) | L4 | Rejected-Finance Being other than L1 Bidder |
| 5 | L5₹37.6 L+₹8.4 L (28.9%)Rejected-Finance | ₹37.6 L+₹8.4 L (28.9%) | L5 | Rejected-Finance Being other than L1 Bidder |
| Sl No | Description | Qty | Unit | M/S MA CONSTRUCTION Co L2 | Mehar Enterprises L3 | KALON INFRACON L1 | M/s Mayeen Ul Haq Rather L6 | SHUBHAM ENGINEERS & BUILDERS L5 | M/S SHAMSHER ALI SUFI L4 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling floor , hearth or wall tiling including cement mortar bedding (but including backing ) , rubbish off the premises, complete all as specified and directed by engr-in-Charge and removing debris ouside MD land. | 390 | Sqm | 20 ₹7,800 | 13 ₹5,070 Lowest | 40 ₹15,600 | 50 ₹19,500 | 20 ₹7,800 | 100 ₹39,000 |
| 2.00 | Demolition of cement concrete (un reinforced ) in ground floors and pavings n.exc 15cm thick (below or above ground level ), complete all as specified and directed by engr-in-Charge and removing debris ouside MD land. | 8.83 | Cum | 300 ₹2,649 | 230 ₹2,030.9 | 80 ₹706.4 Lowest | 90 ₹794.7 | 800 ₹7,064 | 300 ₹2,649 |
| 3.00 | Material & Labour 25mm thick PCC 1:2:4 type B-0 using12.5mm graded crushed stone aggregate as in flooring and finished surface for received tiles, complete all as specified and directed by engr-in-Charge. | 353 | Sqm | 200 ₹70,600 | 150 ₹52,950 | 165 ₹58,245 | 1,950 ₹6,88,350 | 245 ₹86,485 | 129 ₹45,537 Lowest |
| 4.00 | M&L for Glazed ceramic coloured tiles in vertical surface 450x350x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match (Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) incl 10mm thck screed bed below tile for dado/skirting CM 1:4, complete all as specified and directed by engr-in-Charge. | 37 | Sqm | 1,200 ₹44,400 | 1,530 ₹56,610 | 950 ₹35,150 Lowest | 1,200 ₹44,400 | 1,400 ₹51,800 | 1,139 ₹42,143 |
| 5.00 | M & L for coloured, non-Skid Ceramic tiles 7 to 8 mm thick (Square/rectangular ) area of each tile exc 0.11 Sq.m but not exc 0.18 sq.m in floors etc set and jointed in neat cement slury and pointed in white or coloured cement to match over and including15mm thick screed bed of bedding layer of mortar in cement mortar 1:4, complete all as specified and directed by engr-in-Charge. | 22 | Sqm | 1,200 ₹26,400 | 1,390 ₹30,580 | 850 ₹18,700 Lowest | 1,970 ₹43,340 | 1,400 ₹30,800 | 1,149 ₹25,278 |
| 6.00 | M&L for Vitrified tiles (light shade) 8 mm thick in size of 600mmx600mm as in floors etc set and jointed in neat cement slury and pointed in white or coloured cement to match over and including15mm thick screed bed of bedding layer of mortar in cement mortar 1:6, complete all as specified and directed by engr-in-Charge. | 331 | Sqm | 1,400 ₹4,63,400 | 1,510 ₹4,99,810 | 1,150 ₹3,80,650 Lowest | 1,170 ₹3,87,270 | 1,499 ₹4,96,169 | 1,499.99 ₹4,96,496.69 |
| 7.00 | Taking down chowkhat or frame with shutters (without taking of shutters from the frame) exc 1.5 sqm each but not exc 4 sqm each any type of door (wooden, aluminium & steel etc) complete all as specified and as directed by Engr-in-Charge. | 16 | Each | 200 ₹3,200 | 130 ₹2,080 | 250 ₹4,000 | 90 ₹1,440 Lowest | 120 ₹1,920 | 90 ₹1,440 Lowest |
| 8.00 | Taking down chowkhat or frame with shutters (without taking of shutters from the frame) not exc 1.5 sqm each any type of door (wooden, aluminium & steel etc) complete all as specified and as directed by Engr-in-Charge. | 4 | Each | 200 ₹800 | 100 ₹400 | 250 ₹1,000 | 90 ₹360 Lowest | 100 ₹400 | 90 ₹360 Lowest |
| 9.00 | S&F of anodised aluminium door powder coated, frame of door made out of aluminium extruded section 100mmx45mmx2.6mm thick, shutter made out of aluminium extruded section 85mmx45mmx2.1mm thick except bottom rail and lock rail, the section of bottom rail and lock rail 100mmx45mmx2.1mm complete with hydraulic floor mounted door closer, ISI marked, aluminium anodised tower bolt 2 Nos, 5.5mm thick tinted/plane glass pane including reoprene dry rubber gasket set, stainless steel screws, hinges, aluminium anodised snap beading including all necessary fittings and fixtures made out of aluminium anodised complete complete all as specified and directed. | 90 | Kg | 950 ₹85,500 | 893 ₹80,370 | 450 ₹40,500 Lowest | 730 ₹65,700 | 999 ₹89,910 | 790 ₹71,100 |
| 10.00 | S&F of anodised aluminium sliding glazed window powder coated of two/three track frame of window made out of aluminium extruded section 90mmx30mmx2.6mm/ 60mmx30mmx2.6mm thick, shutter made out of aluminium extruded section 38mmx20mmx1.5mm thick including holdfast, anodised aluminium handle of suitable size, necessary joining cleats, glazing clips, 5.5mm thick tinted/plane glass pane including reoprene dry rubber gasket set, stainless steel screws, hinges, aluminium anodised snap beading including all necessary fittings and fixtures made out of aluminium anodised such as handles, locking arrangements complete complete all as specified and directed. | 24 | Sqm | 3,000 ₹72,000 | 9,660 ₹2,31,840 | 480 ₹11,520 Lowest | 1,170 ₹28,080 | 8,500 ₹2,04,000 | 5,999 ₹1,43,976 |
Tender Value
₹43.9 L
EMD Value
₹87,700
Closing Date
21 May 2026, 6:00 pmClosed
GE 865 EWS
GE 865 EWS PIN-913865 c/o 56 APO
SPL REPAIR TO BLDG NO P-10 (MEDICAL STORES) AT 153 GH UNDER GE 865 EWS LEH
2026_MES_762899_1
865/EWS(NIT-68)/2026-27
Open Tender
Civil Works
Item Rate
180 days
GE 865 EWS
Please refer Tender Documents
9 documents required · 9 mandatory
₹500
GE 865 EWS
₹87,700
Yes
12 Aug 2026
30 Apr 2026
29 May 2026
30 Apr 2026
21 May 2026
15 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling floor , hearth or wall tiling including cement mortar bedding (but including backing ) , rubbish off the premises, complete all as specified and directed by engr-in-Charge and removing debris ouside MD land. | 390 | Sqm | - | - |
| 2 | Demolition of cement concrete (un reinforced ) in ground floors and pavings n.exc 15cm thick (below or above ground level ), complete all as specified and directed by engr-in-Charge and removing debris ouside MD land. | 8.83 | Cum | - | - |
| 3 | Material & Labour 25mm thick PCC 1:2:4 type B-0 using12.5mm graded crushed stone aggregate as in flooring and finished surface for received tiles, complete all as specified and directed by engr-in-Charge. | 353 | Sqm | - | - |
| 4 | M&L for Glazed ceramic coloured tiles in vertical surface 450x350x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match (Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) incl 10mm thck screed bed below tile for dado/skirting CM 1:4, complete all as specified and directed by engr-in-Charge. | 37 | Sqm | - | - |
| 5 | M & L for coloured, non-Skid Ceramic tiles 7 to 8 mm thick (Square/rectangular ) area of each tile exc 0.06 Sq.m but not exc 0.11 sq m in floors etc set and jointed in neat cement slury and pointed in white or coloured cement to match over and including15mm thick screed bed of bedding layer of mortar in cement mortar 1:4, complete all as specified and directed by engr-in-Charge. | 22 | Sqm | - | - |
| 6 | M&L for Vitrified tiles (light shade) 8 mm thick in size of 600mmx600mm as in floors etc set and jointed in neat cement slury and pointed in white or coloured cement to match over and including15mm thick screed bed of bedding layer of mortar in cement mortar 1:4, complete all as specified and directed by engr-in-Charge. | 331 | Sqm | - | - |
| 7 | Taking down chowkhat or frame with shutters (without taking of shutters from the frame) exc 1.5 sqm each but not exc 4 sqm each any type of door (wooden, aluminium & steel etc) complete all as specified and as directed by Engr-in-Charge. | 16 | Each | - | - |
| 8 | Taking down chowkhat or frame with shutters (without taking of shutters from the frame) not exc 1.5 sqm each any type of door (wooden, aluminium & steel etc) complete all as specified and as directed by Engr-in-Charge. | 4 | Each | - | - |
| 9 | S&F of anodised aluminium door powder coated, frame of door made out of aluminium extruded section 100mmx45mmx2.6mm thick, shutter made out of aluminium extruded section 85mmx45mmx2.1mm thick except bottom rail and lock rail, the section of bottom rail and lock rail 100mmx45mmx2.1mm complete with hydraulic floor mounted door closer, ISI marked, aluminium anodised tower bolt 2 Nos, 5.5mm thick tinted/plane glass pane including reoprene dry rubber gasket set, stainless steel screws, hinges, aluminium anodised snap beading including all necessary fittings and fixtures made out of aluminium anodised complete complete all as specified and directed. | 90 | Kg | - | - |
| 10 | S&F of anodised aluminium sliding glazed window powder coated of two/three track frame of window made out of aluminium extruded section 90mmx30mmx2.6mm/ 60mmx30mmx2.6mm thick, shutter made out of aluminium extruded section 38mmx20mmx1.5mm thick including holdfast, anodised aluminium handle of suitable size, necessary joining cleats, glazing clips, 5.5mm thick tinted/plane glass pane including reoprene dry rubber gasket set, stainless steel screws, hinges, aluminium anodised snap beading including all necessary fittings and fixtures made out of aluminium anodised such as handles, locking arrangements complete complete all as specified and directed. | 24 | Sqm | - | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.15 MB
TENDERNIT68.pdf
Tender Documents • 0.85 MB
BOQ_854558.xls
BOQ • 1.23 MB
datecorr.pdf
PDF • 4.86 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .