Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.8 LAccepted-AOC | L1 | Accepted-AOC L1 Accepted | |
| 2 | L2₹15.3 L+₹51,292.50 (3.47%)Rejected-Finance | L2 | Rejected-Finance Other than L1 after deducting schedule of credit Rs 37774.00 | |
| 3 | L3₹16.8 L+₹2.1 L (14.0%)Rejected-Finance | L3 | Rejected-Finance Other than L1 after deducting schedule of credit Rs 37774.00 | |
| 4 | L4₹17.1 L+₹2.3 L (15.5%)Rejected-Finance R O BHARDA KALAN P O TEH AKHNOOR PIN 181201 DISTT JAMMU J K | JAMMU | JAMMU AND KASHMIR | 181201 | L4 | Rejected-Finance Other than L1 after deducting schedule of credit Rs 37774.00 |
Tender Value
₹18 L
EMD Value
₹36,000
Closing Date
8 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE North Akhnoor
GE North Akhnoor PIN 181201 CO 56 APO
WELCOME MAINTENANCE TO OFFRS MD ACCN INCLUDING BR AND EM REPAIRS UNDER GE NORTH AKHNOOR
2022_MES_537070_1
GE(N)/AKH-28/2022-23
Open Tender
Civil Works
Item Rate
180 days
Akhnoor
Class E cat a i b i
8 documents required · 8 mandatory
₹500
Yes
GE North Akhnoor
₹36,000
Yes
14 Sept 2022
11 Jul 2022
10 Aug 2022
11 Jul 2022
8 Aug 2022
25 Jul 2022
Amount
Preparaing old surface (plastered or unplastered) surfaces of walls including cornices, pilasters etc by washing, rubbing, stopping brooming down with steel wire brushing and applying one coat of white wash on walls, complete all as specified and as directed by Engineer-in-charge.
M&L for preparation complete removal of exising treatment of old surfaces complete all as specified.
Ditto all as per Srl item No 01 here-in-above but two coats of white wash on walls including complete removal of existing treatment.
Preparaing of old decorated surfaces including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efforescent salts and removing oil and greasy spots and applying one coat of cement base paint on walls, complete all as specified and as directed by Engineer-in-charge.
Preparaing of old decorated surfaces of wall and applying one coat of oil bound distemper on walls complete all as specified and as directed by Engineer-in-charge.
Ditto all as per Srl item No 5 here-in-above but two coats of oil bound distemper on walls complete washing, rubbing down and stopping all as specified.
M&L for 1mm thick (in two layer) wall care putty on wall (Max 1.5 mm thickness for both layers) complete all as specified and directed.
Preparation of old painted surfaces of steel of any description exc 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as spd and directed.
Preparation of old painted surfaces of wooden of any description exc 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
Taking down chowkats or frames exceeding 1.5 Sqm and n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) all as specified and directed
Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) all as specified and directed.
Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each all as specified and directed.
PCC 1:3:6 type C-01 using 12.5 mm graded stone aggregate as in filling of pressed steel frame and including 50mm parapet coping complete all as specified and as directed by Engineer-in-Charge.
S&F Pressed steel frames factory made for doors made out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm including tarring ends and back of chowkats and lugs complete all as specified and directed.
Solid PVC (Door/almirah/cupboard) frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing.
S&F 35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), (Larger size to be provided) kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified & directed.
S&F 30mm thick, 2nd class hard wood glazed and skelton shutter, open rebated and prepare to receive glass, gauzed etc(without sash bars) edges of framming plain , chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR PART I Section 8 clause 8.24(a) supplied and fitted to chowkhat complete all as specified.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side as per specification and drawings.
S&F powder coated anodised aluminum frame for doors, windows, ventilators with one or more rebates incl joining cleat for fixing etc complete all as specified.
S&F powder coated (thickness of coating not less than 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, 5.5mm thick glass (glass shall be measured and paid seperately), rubber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified.
S&F aluminium powder coated anodised aluminium window (including glazed and skelton shutter) and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1No) hinges type B-21 100mm long (2No) suitable handle (1No) etc complete all as specified.
S&F 100 mm butt hinges, medium weight cold rolled mild steel all as specified and directed.
S&F Aluminium handles cast type anodised of size 150mm long ISI marked complete.
S&F Aluminium anodised barrel tower bolts extruded section of size 200mm, all as specified and directed
S&F Aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed.
S&F Steel windows/ventilator (Box type) factory made with double shutter (wire gauged shutter & glass/glazed shutter, (wire cloth and glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, two coats of synthetic enamel paint over one coat of red oxide primer including all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh no 1/1 to 1/3 .
Ditto all as per Srl item No 26 here-in-above but without glazing bars.
S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, or galvanized wire staples all as specified & directed.
Ditto all as per Srl item No 28 here-in-above but fixed in repair.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads complete all as specified.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane including hacking out old glass panes complete all as specified.
S&F floor door stopper 150mm length of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified.
M&L pre laminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber frame in repairs as cupboard shelve and shutter, 18/19 mm thick.
M & L extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails for 18/19mm thick board all as specified and directed.
M&L preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified
M&L for Painting to new untreated wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified.
S&F curtain rail, 20 mm dia stainless steel fixed with and incl two Nos of bracket with side cup incl taking down of old curtain rods, all as directed.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.
M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and smooth with using extra cement complete all as specified.
M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors/Skirting etc. Set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed.
Vitrified ceramics coloured tiles 10mm thick polished area of each tiles n.exc 0.36 Sqm grade B IIa laid as in floors/skirting etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match in light shade incl 10mm thick screed bed/base in CM 1:4 complete all as spd and directed.
Glazed ceramic tiles coloured (Premier quality) of size 350x250x7mm/450x350x7mm thick, jointing in neat cement slurry and pointing in colour cement to match including including 15mm thick cm 1:4 as bedding layer including dismantling existing wall tiles including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed by Engineer-in-Charge.
Granite (of any type work) 20mm thick (table rubbed and polished) in steps jambs, pillars, window cills, cooking platform and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixure of pigment to match with shade of granite including 15mm thick screed bed of CM 1:4 after applying cement slurry @ 3 Kg/Sqm of cement per sqm complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed by Engineer -in-Charge.
M&L for Rendering 15mm thick cement plaster in two layers on fair faces of brick work or concrete surfaces in cement mortar (1:4) & finished even and smooth (without using extra cement) including taking down existing cement plaster from brick or stone walls including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.
Rendering 10mm thick cement plaster in cement mortar (1:3) on brick or concrete surfaces of soffits of chajjas, roof projections or ceiling and finished even and smooth (without using extra cement) including taking down existing cement plaster from brick or stone walls including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.
Rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces as in ceiling, including taking down existing cement plaster from brick or stone walls including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.
Supply only liquid integral water proofing compound all as specified and directed.
Repairs to balcony/Facia and soffit of chajjas etc by taking down old rendering 20 to 25 mm thick to match with the existing thickness in CM 1:3 and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqm cm in width or girth complete all as specified.
Demolition of RCC water tanks (of any capacity measured in cum not in number), RCC Cooking platform (slab), chimneys concrete of any description in any position not otherwise specifically provided for cement concrete complete all as specified and directed.
M&L for Reinforced cement concrete (Nominal mix), type B0, 1:2:4 (using 12.5 mm graded crushed stone aggregate) for cooking platform, slabs supported on walls, beams and columns in floor, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer -in-Charge.
Dismantling water tanks and removing to store and S & F Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and directed by Engineer-in-Charge.
S&F in repair ball brass valves high pressure, with polythene float and fly nut complete, screwed from iron pipe or brass ferrule size 20mm complete all as specified & directed.
S&F GI water tubes 15mm bore dia medium grade galvanised (ISI Marked) with all fittings and fixed complete to walls and ceiling or laid in floor including taking down existing water tubing all as specified and directed.
S&F GI water tubes 20mm bore dia medium grade galvanised (ISI Marked) with all fittings and fixed complete to walls and ceiling or laid in floor including taking down existing water tubing all as specified and directed.
S&F CP angle valve/concealed stop cock of cast copper alloy (ISI Marked) chromium plated fancy type scrwed down high pressure with capstain head screwed both ends for iron pipe 15mm bore fixed in repairs complete all as specified and directed.
S&F Brass CP mixer for sink, cast copper alloy (ISI Marked) fancy type chromium plated for mixing hot and cold water screwed down high pressure with capstain head screwed both ends for iron pipe 15mm bore fixed in repairs complete all as specified and directed.
S&F Stop valve cast copper alloy (ISI Marked) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore fixed in repairs complete all as specified and directed.
S&F Stop valve cast copper alloy (ISI Marked) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 20mm bore fixed in repairs complete all as specified and directed.
S&F Vitreous china wash basin, white, flat back, size 550x400mm with full padestal including CP basin mixer including waste pipe porcelain stopper a pair of CI brackets fixed in repair complete all as specified and as directed by Engineer-in-Charge.
S&F Sink with draining board made out of stainless steel 1.00 mm thick sheet for kitchen or albortory with plugs, washers PVC wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm with bowl size 410 mm x 330mm x 160mm incl PVC waste pipe and coupling supplied and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.
S&F PVC flushing cistern low level of capacity of 10 litre, white, valve less symphonic action type complete with inlet ball valve float and handle or Push button type including brackets and fixed in repair complete all as specified & directed. Make : Hindware/Parryware
S&F Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern (excluding supply but fixing of flushing cistern and flush pipe) fixed in repair complete all as specified and as directed.
S & F Plate rack made of stainless steel 0.8mm thick overall size 786mm x 610mm x 254mm complete all as specified and directe by Engineer-in-Charge.
S&F Plastic water closet seat cover, black, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging devices, complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm size complete all as specified and directed.
S&F CP Swivel shower rose of PTMT any colour for fixing with 15mm pipe complete all as spd and directed.
S&F 15mm bore pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked fixed in repairs complete all as specified & directed.
S&F Hand shower health faucet with 1 mtr long easy flexible chromium tube in chroe finish and wall hook all as specified.
S&F Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and as directed by Engineer-in-Charge.
S&F Soap dish, any type, fixed to plugs with chromium plated brass screws fixed in repairs complete all as specified and as directed by Engineer-in-Charge.
S&F Glass shelf assembly fixed in repairs complete all as specified
Sunken Floor treatment: Providing and laying of water proofing treatment to sunken portion by applying cement slurry mixed with acrylic based polymer modified cementitious composite compound of make as approved including demolition and filling of sunken floor . (a) First layer of slurry of cement @0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm. This layer allowed to air cure for 4 Hours. (b) Second layer of slurry of cement @0.242 kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.125 Kg/Sqmhis layer allowed to air cure for 4 Hours. Note: Concrete for sunken slabs shall be mixed with WP compounds as per manufacturer's instructions, before carrying out water proofing treatment the sunken slab shall be tested with water for 48 hours for any leakage /dampness is seen in ceiling below, then treatment is again carried out to RCC slab and it is again tested before passing for next stage. (Water proofing compound is to paid separately.)
Fixing 10mm dia PVC nozzles and injection grouting using Dr Fix IT URP 301 of M/s Pidilite Industries or equivlent as in sunken floor/ceiling including making good/cleaning exposed surface to the satisfication of Engr in Charge complete all as per manufacturer's instrutions. Note : Nos and location shall be as directed by Engr-in-charge.
S&F CP Bib taps cast copper alloy, fancy type, chromium plated ISI marked for mixing hot and cold water screwed down high pressure with capstain head screwed both ends for iron pipe of 15mm bore fixed in repairs complete all as specified and directed.
Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders, regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete all as specified and directed complete all as specified and directed.
Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 1.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- Make of Cables Havells, KEI,Anchor (Note:- All necessary accessories such as modular steel box,top cover plate, blank plate, screws,washers and all modular electrical fixtures are to be used of same make/brand only and shall be deemed in to included in quoted rate only.) Make of Cable Havells, KEI, Anchor (a) One light point/bell point controlled by one switch
All as per Srl item No 78 here-in-above but for One fan point controlled by one switch and one regulator.
All as per Srl item No 78 here-in-above but for one 5 pin 6 Amps socket point controlled by one 6 amps switch on independent board.
All as per Srl item No 78 here-in-above but for one 5 pin 6 Amps socket point controlled by 6 amps switch on same board.
All as per Srl item No 78 here-in-above but for one light point controlled by two way switch.
All as per Srl item No 78 here-in-above but point wiring with 2.5 sqmm and earth conductor of size 2.5sqmm complete all as specified and directed for the following : (a) One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board.
Supply & fixing modular type switch 6 Amps, single pole, 2 way, 1 module, 240V, ISI Marked complete all as specified and directed. Make: Indoasian Glint, Crabtree, Anchor
Supply & fixing modular type switch 6 Amps, single pole,1 way,1 module, 240V, ISI Marked Complete all as specified and directed. Make: Indoasian Glint, Crabtree, Anchor
Supply & fixing modular type switch 16 Amps, single pole,1 way,1 module,240V, ISI Marked Complete all as specified and directed. Make: Indoasian Glint,Crabtree, Anchor
Supply & fixing modular type socket shuttered type 6 Amps- 2/3 Pin combined 2 module, 240V, AC ISI Marked Complete all as specified and directed. Make: Indoasian Glint, Crabtree, Anchor
Supply & fixing modular type socket 6A/16 Amps -6 Pin combined shuttered socket 2 module with light indication, 240V AC ISI Marked Complete all as specified and directed. Make Indoasian Glint,Crabtree, Anchor
Supply & fix fan regulator modular type electronic, stepped type (01 to 4/5), 100 to 120 Watts, 240Volts,AC ISI marked complete all as specified and directed. Make: Indoasian Glint,Crabtree, Anchor
S&F angle Lamp holder, insulated body with back plate suitable for batten fittings, complete all as specified & directed. Make: Indoasian Glint,Crabtree, Anchor
Supply and fixing buzzer, ding dong AC, 230 volts single pole complete all as specified and directed. Make: Indoasian Glint,Crabtree, Anchor
S & F modular bell push 6A , 1 module, 240V, ISI Marked Complete all as specified and directed. Make :Indoasian Glint,Crabtree, Anchor
S&F ceiling rose 5 amp, 3 terminal, PVC/ polycarbonate body ISI marked complete all as specified & directed. Make: Indoasian Glint,Crabtree, Anchor
Taking down unserviceable DBs and Supply and fixing sheet metal enclosure double door type for DBs single pole and neutral 8 way 240 V with 200 Amp bus bar including blanking plates where required . Make : Indoasian, Legrand, Schiender, Havells etc.
Supply & fix MCB SPN 6 to 32 Amps 10 KA,"C" series, AC, 240Volts, 50Hz, ISI marked complete all as specified and directed Make : Indoasian part No-811122 to 811129 or its equivalent in Havells, Legrand & L & T etc.
Supply & fix MCB SPN 63 Amps 10 KA,"C" series, AC, 240Volts, 50Hz, ISI marked complete all as specified and directed Make : Indoasian part No-811151 or its equivalent in Havells, Legrand & L & T etc.
Taking down old submain wiring and M & L for sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade,FRLS type, PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through rigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors including one run of 4 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface including cutting and cheasing and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 4 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.
M&L for Earthing of galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25 mtr depth below normal ground level) with top edge of earth not less than 1.5 metre below normal ground level, connected to and including galvanised iron wire 4mm dia and light grade protection pipe of 15mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20mm dia medium grade, GI funnel with wire mesh, including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45x45x45 CM, RCC cover 1:2:4 type B1 of size 45x45x6 CM, excavation/earth work in any strata and returing filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.
S&F in replacemebt of Energy saving 10W LED bulk head luminaires, IP-65, oval shape, surface mounted with all other accessories prewired and making connections with copper flexible twisted twin cord of appropriate gauge and length, 230v, 50Hz complete all as specified & directed. Make. Havells, Cat Part No. RUGBYNEONFT10WLED760SSYMBOPC or equivalent in Philips/ Crompton/ Bajaj/Greaves etc.
Taking down unserviceable flourescent fitting and M & L for LED batten Regal suitable for T8 LED tube incl T8 LED tube crystal glass with very high efficacy suitable for installation in existing T8 fitting with G13 lamp 20 watt 4 ft long all as specified and directed. Make : ASCO Model No T8 ALT820 or Havells Part No for batten- REGALBATTENT8UPTO1X22W DSBSWH, Cat Part No- LED Tube T8 : CRYSTAL1213T8DSTL18WLED865SGLASS or equivalent in CG, Philips, Bajaj . Note :- Rate quoted include the cost of both batten and Tube rod T8 and shall match with the batten in .
Taking down old unserviceable Exhaust fan of any type/size from existing location and deposit in MES store yard and Supply and fix exhaust fan single phase metal body, AC 230 Volt, 50 Hz of size 300mm sweep with louvers shouter complete with all accessories including connecting up from ceiling rose to motor all as specified and directed.
PACHNANDA BUILDERS
M/S KARAN SINGH CONTRACTOR
M/S JEEVAN LAL SHARMA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .