Construction of PD Shop Outlet at Pinnathur East At Pinnathur Panchayat Parangipettai Union

Earth work excavation and depositing on banks with initial lead and lift in gravelly soil stiff clay, hard stiff clay, murram, boulders mixed with gravel as per SS 20-B for foundation.

Supplying and M Sand of foundation and basement with carted river sand including all materials and labour charges etc complate

Cement Concrete 1:4:8 mix using 40 mm ISS HBG metal including cost and conveyace of all materials and all labour charges, etc.

Supplying and filling of foundation and basement with carted river sand including all materials and labour charges etc complate

Brick work in Cement Mortar 1:5 using Country bricks including cost and conveyace of all materials and all labour charges,etc,

Brick work in Cement Mortar 1:5 using Country bricks including cost and conveyace of all materials and all labour charges,etc,Super structure

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.20 m height for plane surface in all floors with all cross bracing using mild steel of size 0.95 cm x 60 cm and 10 guage stilfaned welded with mild steel angles of size 25 mm x 25 mm x 3 mm for boarding laid over silver oak (c-word) joint of size 10 cm x 6.50 cm dia spaced about cnter to center and supported by casuarinas propels of 10 cm to 13 cm dia spaced at 75 cm center to center etc., complete complying with standard specification and as directed for the following items

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.20 m height for plane surface in all floors with all cross bracing using mild steel of size 0.95 cm x 60 cm and 10 guage stilfaned welded with mild steel angles of size 25 mm x 25 mm x 3 mm for boarding laid over silver oak (c-word) joint of size 10 cm x 6.50 cm dia spaced about cnter to center and supported by casuarinas propels of 10 cm to 13 cm dia spaced at 75 cm center to center etc., complete complying with standard specification and as directed for the following items Super structure

Supply and fabrication of placing in position of steel including cost of steel and binding wire and all labour charges for cutting bending etc

RCC 1:1 1/5 3mix using 20mm ISS HBG metal including cost and conveyance of all materials but excluding centering charges including labour charges for mixing laying concrete etc., complete

RCC 1:1 1/5 3mix using 20mm ISS HBG metal including cost and conveyance of all materials but excluding centering charges including labour charges for mixing laying concrete etc., Super structure

Providing Granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS HBG metal to 50 mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc, complete.

Plastering with cement mortar 1:3 mix 12 mm thick including cost and conveyance all material and all labour charges etc complete

Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (1 Liquid: 2 Powder), to the RCC surface like bathroom, toilet, balcony & utility area applied @ 1.7kg/m2 in 2 coats to achieve 1mm DFT, having Elongation at break >50% as per ASTM D 412, Tensile strength >1N/ mm2 as per ASTM D 412, Adhesion strength: 0.80 N/mm2 as per ASTM D 4541, crack bridging upto 1mm as per ASTM C 836, Water penetration (5 bar pressure) as per BS EN 12390. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification.

Floor finishing with Ceramic tiles of size 305x305x6mm colour tiles with design laid in cement mortar 1:3 using 20 mm thick and pointing with same colour cement of 3 kg including cost and conveyance of all materials to site and all labour charges etc complete.

Dadooing the sides of walls up to required height with est approved quality colour printed glazed tiles of size 150x150x6mm and set in CM 1:2 using 10 mm thick and pointing with same colour cement of 4 kg including cost and conveyance of all materials to

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work. (Based on SoR 2023-24)

Ceiling Plastering with cement mortar 1:3 mix to 10 mm thick for R.C.C. Items including cost and conveyance of all materials to site and all labour charges etc complete

Plastering with CM 1:5, 12mm thick over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Painting two coat with approved quality and interior Emulsion paint over the plastered surface including cost and all other charges etc.,

Painting TWO coats of new iron works such as steel doors, windows,ventilators, window bars, balustrades etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats, etc., complete complying with standard specifications and as directed by the departmental officers.

Supply of steel doors and windows Rolling Shutter 1.80 x 2.10 m

Door 0.91 x 2.10 m

Toilet Door 0.75 x 1.80 m

Ventilator 1.00 x 0.60 m

Window W 0.90 x 1.20 m

Supply and fixing of Cuddappa slab including cost and conveyance of cuddappa slab and labour charges for fixing etc, complete.

Labour charges for fixing Rolling shutter, doors, windows and Ventilators etc

Labour charges for fixing Rolling shutter, doors, windows and Ventilators etc

Supply and fixing of Water closet wit "P"-trap

PVC 4'' dia pipe

RCC Precast rings

RCC Precast cover slab

Supplying and fixing following Electrical arrangementa)Wiring with2*1.5 mm2 (22/.3) pvc insulated unsheathed sc Cu . Conductor of 1100 v grade in suitable PVC ridged pipe on wall and ceiling with PVC accessories with tw switch box inflush with wall covered hylum sheet of 3 mm thick with painting of suitable (SD 17)

a)Wiring with2*1.5 mm2 (22/.3) pvc insulated unsheathed sc Cu . Conductor of 1100 v grade in suitable PVC ridged pipe on wall and ceiling with PVC accessories with tw switch box inflush with wall covered hylum sheet of 3 mm thick with painting of suitable (SD 36)

b)Supply and fixing of water tight Bulk head fitting with guard suitable for incandascent bulb (SD 83)

c)Supply and fixing CFL light fittng and all labor chargese etc complete

d)Supply and fixing of single Type street light Flu. fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fittings for Street light

e)Supply and runoff 2*1.5 mm2 PVCinsulated SC unsheathed Cu.conductor of 1100 V garde in 25 mm dia GI pipe (class B) suitably bent at both end with necessary angle iron upright and end support for mains (SD 69)

f)Supply and runoff 2 of 6 mm2 (84/0.3) pvc insulated SC unsheathed Cu.conductor of 1100 v on 7/20 Gi bearer wire for service connection main (SD 66 )

g)Supplying and fixing of 16AMS DPI Switch of 500volt with fuse and Neutral (side handle) on suitable TW/PWD Earthing SD135 Service main (SD 142)

h)Supplying and fixing of 1200mm(40")AC Ceiling fan with stepped electronic 300W regulator with 1m down rod on the existing clamp (SD 110)

25mm PVC tap

32mm PVC Pipe

32mm PVC Bend

32mm PVC Tee

32mm PVC Elbow

32mm PVC Coupling

32mm PVC Gate valve

110mm PVC Bend

110mm PVC Tee

110mm PVC Elbow

Sintex Water tank 500Lit

Provision for Name Board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Please Enable Macros to View BoQ information