Proposed landscaping and Beautification of Dhruva Guest House Kidwai Nagar West, New Delhi

Amount

PART I : CIVIL WORKS

PART II : HORTICULTURE DEVELOPMENT

PART III : ELECTRICAL WORKS

Description of Work / Item(s)

Amount

PART I : CIVIL WORKS

Depth not exceeding 1.50m from ground level.

Providing and laying dry rubble stone hard core soling of following consolidated thickness in sub base to floor and in plinth protection to required levels and lines with first quality rubble, hand set, well packed including filling the interstices with smaller stone blinding the surfaces with approved blinding chips, supplying & finishing / quality murrum including watering, consolidation etc. complete as per specification drawings & as directed by Engineer in charge.

150mm consolidated thickness.

Dismantling/removing existing flooring/brick works/ PCC/ RR Masonry works/kerb stone/paver blocks etc. by chiselling at all floors and levels including scaffolding, stacking of serviceable materials within 500m lead and disposal of unserviceable materials within lead of 5KM from the guest house premises by mechanical transport etc. complete all as per specifications and as directed by the Engineer-in-Charge.

Cement concrete of specified grades at all locations & depths for the following works using graded stone aggregate of 20mm maximum size including necessary form work, machine mixing, transporting, placing in position consolidation, finishing, curing etc. complete all as per specifications, drawings & as directed by the Engineer in Charge. Note: Nominal reinforcement if provided shall be measured & paid under relevant item.

Cement concrete of grade M-10 or of nominal size CC 1:3:6 in foundation, mudmat course, footing of dwarf wall etc.

Cement concrete of grade M-15 or of nominal size CC 1:2:4 for sub base flooring and other area.

Cement concrete M-25 or of nominal size 1:1:2 in foundation, column, pedestals, cable pits, cable trenches, plinth protection, Coping etc.

Reinforcement for RCC work including supplying steel bars of various diameters as required at site of work including loading, unloading, transporting, decoiling,straightening, cutting, bending placing in position and binding with 18 gauge, soft drawn annealed steel binding wire including carrying out various tests as required etc. all as per specifications, drawings & as directed by the Engineer in charge. Note:- Cost of binding wire shall be borne by the contractor & shall not be measured for payment.

Thermo Mechanically Treated bars of grade Fe-500 D manufactured by SAIL ,TATA STEEL, JSW and RINL only.

Providing, erecting, fixing in position striking /removing and cleaning steel / timber shuttering & centering for form work in foundation , plinth or tie beams, lift pits, cable trenches, electrical pits etc. at all locations for all geometrical shapes inplain,curved surfaces of structural / RCC elements including chamfers, splays, keys, wedges, props, rails, bracings, brackets, cutting holes for pipes etc., providing & applying approved form oil on all surfaces ofform work coming in contact with concrete including close hacking of all exposed concrete work after removal of form work, all materials, labour etc. complete as per specifications drawings and as directed by the Engineer-in-charge. Notes :- a) Area of form work in contact with concrete shall only be measured for payment & stop boards for construction joints etc. will not be measured for payment. b) The rate for formwork shall include all type of structural/ RCC elements and all geometrical shapes including circular and any other curved surfaces. c) For double/ multi stage shuttering design calculations and details / drawings for scaffolding shall be submitted by the contractor well in advance. Prior written approval of form work shall be obtained from Engineer in Charge, before commencement of work. d) Nothing Extra Shall be entertained for revision in drawings.

Providing and laying autoclaved aerated cement blocks masonry with 115mm/ 150mm/ 230mm thick AAC blocks as per approved manufacturer, using approved block laying polymer modified adhesive mortar in super structure above plinth level at all locations, levels & lead with RCC band at sill level and lintel level all complete as per direction of Engineer in-Charge. (The payment of RCC band and reinforcement shall be made for separately)

External/ internal cement plaster of various finishes as specified below in Ready Mix Mortar 1:4 using RMM +Putty at all heights and locations including scaffolding, preparing the surfaces, finishing and rendering with sponge to correct line, level and plumb, curing including making grooves, vatas, plaster fluting (plaster in steps) etc. where ever required complete as per specification and drawings and as directed by the Engineer in Charge.

12 mm thick in single coat smooth plaster finish for independent concrete/brick surfaces.

Providing and fixing in flooring/ dado/ skirting/ cladding with anti skid tiles (Full body Vitrified tile) of size 300X300X10 mm thickness (Approx. size), Endura Exterior Grade tiles of approved make and pattern with 20 mm thick 1:4 Cement mortar / (Using Ready mix mortar, as specified) bedding and jointing with cement slurry @ 3.3 kg/sqm including pointing with white cement mixed with pigment of matching shade including all labour, material, wastage etc complete all as specifications and as directed by the Engineer-In-Charge.

Providing and fixing of 6mm thick flooring tiles of M/s. Welspun (or) any other approved equivalent with wooden finish & size as per manufacturer specifications & as required by department in approved pattern and shade including necessary adhesive as per manufacturer specifications over the IPS/ Mosaic flooring/ skirting including cutting to the required size & shape including wastage, removal of old existing flooring cleaning the flooring including providing of levelling course (if required to make horizontal) etc. all as per manufacturer's specifications and as per pattern and including disposal of debris at location identified by EIC and complete as directed by the Engineer-in-Charge.

a) With 6mm Thick tile

Painting plastered / concrete surfaces with two coats of exterior grade acrylic emulsion paint of approved colour and shade over a coat of approved cement primer including all as per manufacturer's recommendations and as per the approved sample including providing necessary scaffolding, cleaning the surface with water to remove all coating, dust, filling up cracks &crevices with approved putty, curing the surface etc. complete as per specifications and as directed by Engineer in Charge.

Structural steel work in frames, covers, using angles, tees, flats, bars , chequered plates, inserts fabricated out of mild steel bars, ISMC,ISMB, ,angles, pipes , plates and diaphragm plates for expansion joints etc. of all shapes, sizes including supplying, cutting, fabricating, welding, erecting, making holes/chases wherever required, supplying CI gold color motifs, supplying Gate roller and fixing/embedding in position in concrete/brick work with necessary hold fasts/ screws & rawl plugs and finishing the concrete/ brick work after fixing /embedding including painting two coats of anticorrosive bitumastic paint on all unexposed surfaces and two coats of synthetic enamel paint of approved make and colour on all exposed surfaces over a coat of approved steel primer etc. complete as per specifications, drawings and as directed by the Engineer in charge.

Structural steel works for MS Gate of approved drawings, grating, pergola, plates & other misc works as per approved drawings

Providing & laying Machine Cut, Machine Polished Marble stone flooring/ table top/ seating etc. at all levels, floors, location approved thickness, colour and shade marble stone in proper line and level and including providing & fixing over (20 mm thick bedding for flooring / 12 mm thick backing for dado/skirting with cement mortar of (1:4) using ready mix mortar, as specified) including filling the joints with matching white cement slurry rubbing and polishing complete all as per specifications, drawings and as directed by the Engineer-in-charge Note:- 1) All finished natural stone except for flooring & Platform shall be applied with araldite or equivalent stone adhesive on back surface, spreading/splashing of sand particles on adhesive applied surface before a day of fixing of stones. 2) Window jamb, cill & lintel bottom with granite / green marble shall be mitred / partly mitred joint as directed by Engineer-In-Charge. 3)Exposed inside vertical finished face of window below platform shall be measured for payment in sqm. 4)Agencies shall quote rate accordingly. 5) For site mix mortar as bedding / backing the rate shall be adjusted accordingly.

Marble stone of size 900 mm dia 25 mm thick White marble top table machine cut machine polished marble stone including necessary cement mortar CM 1:4, 20 mm thick for backing/ bedding, close jointed and grouted with matching cement slurry and finished to line, slope, level, plumb, curing etc, as required including cutting of stone slabs, wastage, making cut outs wherever required etc all as per drg, specifications and as directed by EIC.

Marble stone of size 450 mm X 750 mm 25 mm thick White Marble machine polished marble stone as mentioned followings including necessary cement mortar CM 1:4, 20 mm for backing/ bedding, close jointed and grouted with matching cement slurry and finished to line, slope, level, plumb, curing etc, as required including cutting of stone slabs, wastage, making cut outs wherever required etc all as per drg, specifications and as directed by EIC.

Marble stone of size 300 mm X 300 mm or of required size with 25 mm thick machine cut machine polished marble stone as mentioned including necessary cement mortar for CM 1:4, 12 mm thick backing/ bedding, close jointed and grouted with matching cement slurry and finished to line, slope, level, plumb, curing etc, as required including cutting of stone slabs, wastage, making cut outs wherever required etc all as per drg, specifications and as directed by EIC.

Providing and fixing 300 mm dia and 150 mm thick marble Stone for seating approved colour, shape laid in pattern all as per specifications and as directed by the Engineer in Charge.

Providing and fixing laser cut decorative MS sheet screen using MS sheet of 2-3 mm thick with design and pattern as shown in the SKETCH including two coats of synthetic enamel paint over a coat of approved primer. (NOTE: Structural steel used for this screen support if any shall be paid under relevant item)

Supplying and fixing of Flower vase external (12'' - 15'' high, 12''x12'' base)made of Resin/ Ceramic outdoor type as per SKETCH and as approved by Engineer in Charge

Supplying and fixing of 3 feet High with base of 1 feet to 2 feet external pots made of Resin/ FRP outdoor types per SKETCH and as approved by Engineer in Charge

Designing, providing, applying Artistic painting work using approved acrylic paints of approved design and drawings over the existing wall including all as per manufacturer's recommendations and as per the approved design including providing necessary scaffolding, cleaning the surface with water to remove all coating, dust, filling up cracks & crevices with approved putty, curing the surface etc. complete as per specifications , drawings and as directed by Engineer in Charge.

Supplying and fixing in position at all floors integrated bronze anodised matt finished [15 micron thick], aluminium section [extruded] for aluminium Door / windows sliding / top hung/ fixed / grill/ adjustable louvered/ windows as per drawing of approved manufactures with extruded sections of Jindal / Indal / Aluminax or other approved equivalent sections with size and weights as shown in the drawing, for frames and shutters [including wastages if any] conforming to relevant I.S specifications with all approved Bronze anodised aluminium fittings and accessories, locking arrangements, 2 / 3 rollers with ball bearings for sliding shutters of approved quality all as shown in the drawing, including providing and fixing aluminium channel beading / glazing clips fixed with necessary bronze anodised screws, grouting the gap with thermocole & polysulphide sealant etc. all complete generally as per drawings, specifications etc., all as directed by Engineer in charge. but excluding the cost of glazing, which will be paid separately. Note:- Approval of the Dept. for the complete design and shop drawing shall be obtained before commencement of the work.

Providing, Supplying & fixing at site of stone fountain of having size not less than 4 feet x4 feet x5 feet made of natural Yellow sand stone finishing with polishing with one pond with three bowls including wooden packing, loading, transporting and inloading on RCC/PCC foundation( foundation work not included ) including placing all necessary plumbing work such as pipes, pump and nozzle for the fountain working complete all as per attached sketch/ drawing, specification as directed by the Engineer-in-Charge.

Description of Work / Item(s)

Amount

PART II : HORTICULTURE DEVELOPMENT

Making lawns, including supplying, stacking, and planting of ground cover of St. Augustine with cleaning of the site, uprooting & removing all wild vegetation, roots, boulders, stone pieces, debris etc and disposing the surplus waste / debris at various locations, including trenching 150mm, mixing well drained soil and farm manure in 1:1 proportion, (excluding cost of red garden soil & manure), fine dressing of the surface, consolidation, watering, planting of the ground covers including all complete as per specifications and as directed by the Engineer in charge.

Providing & fixing artificial green wall with "VIRGIN" Polyethylene sheet frames of 50cm length, 50cm breadth & 60mm thick, by fixing different varieties of artificial flowers & decorative leaves all including cost of material, transportation, fixing charges, labour etc, all complete as per & as per directions of the Engineer-in-Charge.

Providing and fixing 25 mm thick artificial grass turf with lush , realistic & durable of approved make, fixing with specified locations at Dhruva guest house, including charges for labour, transportation , loading & unloading etc. all complete as per specifications and as directed by the Engineer in charge.

Providing and planting Plumeria Obtusa -5 ft (pot size 14") including digging of pits of size 750 mm x 750 mm x 750 mm filling pits with well mixed mixture of approved quality red soil and farm yard manure in 1:1 proportion, (excluding cost of red garden soil & manure) consolidation, watering, planting the well grown and healthy shrub sapling of height as specified below, profuse watering after planting saplings and disposing of grass/surplus earth at specified locations at Dhruva guest house etc complete all as directed by the Engineer - in-charge. Note: 1. Casuality of planted trees & topiery, if any, shall be replaced by the contractor at no extra cost to the department. 2. Penalty recovery for casualities shall be made @ of double the quoted rate if not replaced immediately.

Providing & fixing different size & shape topiary in ready position with Malpighia plants , including digging of pits of size 750 mm x 750 mm x 750 mm filling pits with well mixed mixture of approved quality red soil and farm yard manure in 1:1 proportion, (excluding cost of red garden soil & manure) using various size and shape of MS sections of 5-12 mm thick/Dia as specified size in ready position with rust free coating, Including cost of fabrication, welding charges, labour, materials, tools, transportation with loading & unloading and erection at specified locations etc. all complete & as directed by the Engineer-in-charge.

Malpighia Topiary cone shape- 5 ft height (pot size 14")

Malpighia 3 steps boll shapeTopiary cone- 5 ft height (pot size 14")

Providing and planting following Shrubs & seasonals including digging of pits of size 300 mm x 300 mm x 300 mm filling pits with well mixed mixture of approved quality red soil and farm yard manure in 1:1 proportion, (excluding cost of red garden soil & manure) consolidation, watering, planting the well grown and healthy shrub sapling of height as specified below, profuse watering after planting saplings and disposing of grass/surplus earth at specified locations etc complete all as directed by the Engineer - in-charge. Note: 1. Casuality of planted sapling, if any, shall be replaced by the contractor at no extra cost to the department. 2. Penalty recovery for casualities shall be made @ double the quoted rate if not replaced immediately.

Ice cream creeper (Antigonon leptopus) Bag size 8"X8" ( ht.2 ft.)

Pandanus golden -Bag size 8"X8" ( ht.1.5 ft.)

Monsterara deliciosa- bag size 6"X6" (ht-3 ft)

Dracaena Dara Singh- Bag size 8"X8" (ht. 1.5 ft)

Malphegia- Bag size 6"X6" (ht. 1 ft)

Aglonima milky/ Broken heart -Pot size 8"X8" (ht. 1 ft)

Thuja (Platycladus orientalis) - Bag size 13" (ht. 1.5 ft)

Monstera adansonii/ Coleus

Providing & spreading of well drained red soil free, from stones, pebbles etc at site as directed by the Engineer-in-Charge & as per specifications (Quantity will be taken as per truck body measurement filled with red soil without deduction of any voids).

Providing & spreading of well decomposed, dry farm yard manure free from soil & undecomposed grass etc. at site as directed by the Engineer-in -charge and as per specifications. (Measurements will be as per truck body dimensions without any deduction of voids.)

Providing 16" round shaped pot made with heavy duty plastic of Harshdeep Hortico ltd./Decora pots or equivalent, pots are to be filled with red soil & plants duly completed all Including cost of labour, materials, tools, transportation with loading & unloading at specified locations etc. all complete & as directed by the Engineer-in-charge. (pot cost should exclude cost of plants & red soil, which shall be measured in another item)

Providing 24" X 24" pot size square in shape made with FRP manufactured by Harshdeep Hortico LTD/Decora pots or equivalent, pots are to be filled with red soil & plants duly completed all includings cost of labour, materials, tools, transportation with loading and unloading at specified locations etc. all complete & as directed by the Engineer-in-charge. (pot cost should exclude cost of plants & red soil, which shall be measured in another item)

Maintenance of Lawn/ground, new planted trees, shrubs & hedges etc, watering the lawns, plants twice a week, mowing lawns , weeding shruberries , preparation of basins around new planted trees & making it smooth, prunning of existing trees/shrubs overgrown branches whenever required, keeping the area in clean condition, rodents & crabs by baiting as & when required by taking necessary precautions, including cost of disposing of garden waste specified locations etc. Complete all as per specifications & as directed by EIC. NOTE:- Actual area of lawn maintained will be measured in Sq.m Pucca drain, manhole chambers & any other structure within garden area will not be considered for measurement/payment.

Description of Work / Item(s)

Amount

PART III : ELECTRICAL WORKS

General Note : 1. Agency has to submit LM 80 & LM 79 reports of NABL accredited lab of all the LED fixtures offered. 2. All the LED fixtures offered shall be as per "specification of Electrical works Chapter -18 : Outdoor LED Luminaires" https://dcsem.gov.in/resources/uploads/electrical_work/specification_electrical_works_18338843931709119468.pdf 3. Specific requirement given below shall prevail over the general specification mentioned above in case of discrepancy. 4. The following tests shall be conducted on all LED luminaries as per IS 16107 & sampling shall be as per IS 10322 (Part-5) from any NABL accredited Lab • Marking • Total input power • Luminaire efficacy (lm/W) • Colour rendering index (CRI) – only initial values to be measured • Correlated colour temperature (K) – only initial values to be measured • Chromaticity tolerance – only initial values to be measured • Power factor • Luminous flux • Luminous intensity distribution All the fixtures to be got approved by department before supply. 3 years warranty certificates From OEM shall be submitted to department.

LED light fixture:

Supply, installation, testing & commissioning of 9W LED Post Top light fixture similar to Trya MID of M/s Lighting technology with required SS hardware PCC foundation as per OEM all as required & instructed by E-I-C.

Supply installation testing & commissioning of 6W LED projector/spike light similar to Spike LED light of M/s Lighting technology complete with mounting accessories & PCC foundation including excavation of all type of soil with required SS hardware, all as required & instructed by E-I-C. Note :Scope of work includes fixing of the fixtures on suitable size PCC foundation bock of size 150mm x 150 mm (approx.)including excavation as required.

Supply installation testing & commissioning of outdoor LED batten lighting fixture having minimum efficacy of 105 lm/watt, 2000lm cool white colour temperature with diffused polycarbonate cover & pressure die cast housing having atleast IP65 protection etc. complete with mounting accessories on surface of slab/beam/ wall with required hardware, interconnections between light point and light fixture with copper flexible TRS wire all as required & instructed by E-I-C.

Supply & installation of 25 mm dia rigid HMS PVC of conduit :

Supply & installation of 25 mm dia rigid HMS PVC of conduit with all required accessories like junction box , bend, etc. on surface of slab / wall / column fixed with PVC spacer saddles, nylon / rawal plug, GI wood screws/ using self tapping /threading screw, at the intervals of 300mm as per the instruction of Engineer-in-charge.

Making of grooves by cutting floor tiles /floor/wall with cutter machine and supply & laying of HMS PVC of 25 mm dia rigid conduit with all required accessories like junction box , bend, etc. for laying power & control cable/ wires as required, refilling the grooves with cement concrete & finishing the surface to floor level as required.

Supply & installation of 25 mm dia rigid HMS PVC of conduit with all required accessories like junction box, bend, etc. in ground at a depth of 500 mm below ground level including excavation all as per the instruction of Engineer-in-charge.

Supply & installation of 50mm dia. HDPE pipe with all fixing accessories in ground at a depth of 500 mm below ground level including excavation in all types of soils, including consolidating, temporary reinstatement, back filling, dewatering, all as required & as instructed by EIC.

PVC coated flexible steel Conduit Supply, installation, testing & commissioning of 20mm liquid tight, PVC coated Flexible Galvanised Steel conduit made up of helical coil of self interlocked ribbed stripes of Galvanised steel complete with necessary accessories like PVC gland etc. as required & instructed by EIC.

Supply installation testing & commissioning of 1100 grade 3Cx 1 sq. mm copper conductor PVC insulated PVC sheathed flexible cable of M/s Polycab/ RR Kabel / KEI/Havells in existing conduit including end termination with copper lugs all as required & instructed by E-I-C.

Supply installation testing & commissioning of 1100 grade 4Cx 2.5 sq. mm copper conductor PVC insulated PVC sheathed flexible cable of M/s Polycab/ RR Kabel / KEI/Havells in existing conduit including end termination with copper lugs all as required & instructed by E-I-C.

Supply & installation of IP67 Polysterin/ABS cable junction box similar to catalogue No. PAB 280280OL of M/s. Pricision make with 32A, 4 way, 415V resin cast stud type connector suitable termination cable of size 16 sq. mm, SP MCB C-6A-1no on DIN chanel, 2mm thick G.I. gland plate of suitable size and openable plain cover etc. and as per instructions of E.I.C.