REPAIR OF WOODEN FURNITURE AT FURNITURE YARD AT JAIPUR MIL STN

Amount

Teapoy wooden (1.01 to 1.04) : Removing of following old unserviceable wooden part and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum, size, shape & design as shown on drg . All new surfaces shall be two coat of french polish with high gloss finish.including tightening the joints by pinning, screwing, nailing and placing every part intact all as specified in drg and directed Drag No - FD-278,382

Side rail

Front/back rail

‘L’ type bracket of size 75mm x 75mm x 20mm fixed with screws.

Table 3'x2' with or without drawer (2.01 to 2.08): Removing of unserviceable part of following and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finistall as specified in drg and directed Drag No - FD-283, 284

Front/rear rail

Side rail

Middle stiffeners

Side stiffeners

Bottom ply of drawers (commercial ply woods of size 550mm x 310mm x 6mm).

Side members of drawer

‘L’ type bracket of size 75mm x 75mm x 20mm fixed with screws.

Table dining 4 x 3 (3.01 to 3.04): Removing of unserviceable part of following and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, All new surfaces shall be two coat of french polish with high gloss finish and placing every part intact all as specified in drg and directed. Drag No - FD/MAP-II/-03

Front/back rail

Side rail

‘L’ type bracket of size 75mm x 75mm x 20mm fixed with screws.

Table dining 6 person (4.01 to 4.04): Removing of unserviceable part of following and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing. All new surfaces shall be two coat of french polish with high gloss finish and placing every part intact all as specified in drg and directed. Drag No - FD-239, 269, 273, FD/Map-II/03

Front/back rail

Side rail

‘L’ type bracket of size 75mm x 75mm x 20mm fixed with screws.

Table dining 8 person (5.01 to 5.04) : Removing of unserviceable part of following and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed. Drag No - FD-239,FD-273,FD-376

Front/back rail

Side rail

‘L’ type bracket of size 75mm x 75mm x 20mm fixed with screws.

Table writing (6.01 to 6.06) : Removing of unserviceable part of following and S&F new part made out of 1st class hard wood (Teak wood )Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drawing and directed Drag No FD-249, 275

Front/ back rail

Bottom base of box 18mm thick commercial particle board (ISI marked)

Back ply box 6mm thick commercial ply (ISI marked)

Front door 18mm pre-laminated particle board including knob and hinges piano type continuous.

Bottom of drawer 6mm thick commercial ply (ISI marked) of size 600mm x 450mm .

Table 3x3 (7.01 to 7.03) : Removing of unserviceable part of following and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drawing and directed Drag No - FD-88M, 291

Front/side rail

bracket ‘L’ type of size 75mm x 75mm x 20mm fixed with screws.

Table Peg (8.01 to 8.05) : Removing of unserviceable part of following and S&F new part made out of 1st class hard wood (Teak wood)Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed Drag No - FD-25, 277, 384, 236

Front rail

Side rail

‘L’ type bracket of size 75mm x 75mm x 20mm fixed with screws.

PVC Shoes (4 nos in one chair)

Table Centre(9.01 to 9.05) : Removing of unserviceable part of following and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed. Drag No - FD-274, 134(M), 235,267,393

Front/rear rail

Side rail

‘L’ type bracket of size 75mm x 75mm x 20mm fixed with screws.

PVC Shoes (4 nos in one chair)

Chair WB (10.01 to 10.07) : Removing of unserviceable part of following and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed. Drag No - FD-285

Stiffener

Front/Side/ rear rail

Back Support

Front leg

Rear leg

PVC Shoes (4 nos in one chair)

S&F Plywood 6 mm thick BWR grade ISI marked as per drg

Sofa Set (11.01 to 11.06) : Removing of unserviceable part of following and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed. Drag No FD-373,281

Side planks of sofa seat

Bottom planks of sofa set

Handle of single seat

SOFA SETs . Removing the existing unserviceable cushion and replacing with new 100mm thick cushion of 'cool' foam of 40 density 530 mm x500 mm covered with best quality of tapestry cloth Make - Sleepwell/Kurlon all as shown on drgs and as approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth should not be less than Rs.150/Mtr

Removing of old unserviceable tapestry cloth from cushion of sofa set and S&F new tapestry cloth and stitched on cushion as shown on drawing.

Table Bed Side (12.01 to 12.02): Removing of unserviceable part of following and S&F new part made out of 1st class hard wood (Teak wood) and both side pre laminated particle board 18mm thick ISI marked including teak wood edging duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed Drag No FD-248,FD-276

Top/middle/bottom shelf

Sides pane including legs

Side board (13.01 to 13.05) : Removing of unserviceable part of following and S&F new part made out of 1st class hard wood (Teak wood) and both side pre laminated particle board 18mm thick ISI marked including teak wood edging duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed Drag No - FD-241, 371, 372

Back side 6mm thick commercial ply wood (ISI marked)

Shutter fixed with piano type hinges continuous 20mm.

Knobs 50mm of chromium plated of approved coloured and standard quality.

Top base

Sides pane including legs

Bed with plytop (14.01 to 14.06): Removing the existing unserviceable / broken parts and S&F first class hard wood (Teak wood/Bonsum) new parts complete all as specified and shown on drgs shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. Drag No - FD-246 & 247

Head board alongwith the legs

Footboard alongwith the legs

Centre stiffeners

Long rail for following size 35x90x1980 mm including 35 mm x 5mm flat iron of mild steel bent to right angles to be provided as directed by Engr-in-charge

Short rail

Ply wood of size 1950x900x12mm commercial BWR quality ISI marked

Table dressing (Ladies) : Removing of unserviceable part of furniture and supply and fixing new part made out of 1st class hard wood teak duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins including polishing to replaced part of wooden to match with existing part to make the serviceable item and removing existing U/S mirror with ply of table dressing ladies and S/F new mirror 5.5mm thick of clear vision (Make : Modiguard, Saint Gobin) with 6mm thick ply fixed at back. Drag No FD-251,378, FD/E6/MAP/16

Table dressing gents: All as per item No 15.00 above but Removing existing U/S mirror with ply and S/F new mirror 5.5 mm thick of clear vision (Make : Modi Guard) with 6mm ply on back . Drag No - FD-230,379

Polishing description (for 16.01 to 16.18) : M&L preparation of wooden surfaces by cleaning, scrapping through electric grinder and smoothing of surfaces with sand paper and applying one coat of French polish on the wooden part of furniture. Minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing

Teapoy wooden. Drag No - FD-278, 382.

Table 3'x2' with drawer. Drag No - FD-284.

Table 3'x2' without drawer. Drag No - FD-283.

Table dining 4’ x 3’. Drag No - FD-273.

Table dining 6 person . Drag No - FD-239, 269, 273 FD/Map-II/03.

Table dining 8 person. Drag No - FD-239, FD-273, FD-376.

Table writing. Drag No - FD-249, 275.

Table 3x3 wooden. Drag No - FD-88M, 291.

Table Peg. Drag No - FD-25, 277, 384, 236.

Table Centre. Drag No - FD-274, 134 (M), 235,267,393.

Chair WB without arms. Drag No - FD-285.

Table Bed Side wooden. Drag No - FD-248, FD-276.

Side board. Drag No - FD-241, 371, 372.

Bed with plytop. Drag No - FD-246 & 247.

Table dressing (Ladies). Drag No - FD-251, 378, FD/E6/MAP/16.

Table dressing gents. Drag No - FD-230, 379.

Sofa set 5 seater. Drag No - FD-281, FD-373.

Sofa set 4 seater. Drag No - FD-281, FD-373.

Replacement of TOP (17.01 to 17.09): Taking out unserviceable top from Tables and S&F new top made out of 18mm thick pre laminated particle board exterior quality including 4mm thick teak wood edging al- around the top duly polished size shall be as shown on drg and as directed.

Teapoy wooden. Drag No - FD-278, 382.

Table 3'x2' with or without drawer. Drag No - FD-284.

Table dining 4’ x 3’. Drag No - FD-273.

Table dining 6 person. Drag No 239, 269, 273, FD Map-II/03

Table dining 8 person. Drag No FD-239, FD-273, FD-376.

Table writing. Drag No FD-249, 275.

Table 3x3. Drag No FD-88M, 291.

Table Peg. Drag No - FD-25, 277, 384, 236.

Table Centre. Drag No - FD-274, 134 (M), 235, 267, 393.

Schedule of Credit

L.BHIMSEN

SK INDUSTRIES

Shri Gajanand Enterprises

F.M. KHAN SONS

AJAY TRADERS

GLOBAL ENGINEERS AND INNOVATORS