Loading
Loading…
Loading…
Tender Value
₹9.7 L
EMD Value
₹19,406
Closing Date
28 Aug 2026, 6:00 pm4d left
ASSISTANT GARRISON ENGINEER (I) AIR FORCE AMRITSAR
ASSISTANT GARRISON ENGINEER (I) AIR FORCE AMRITSAR
PROVN OF SANCTIONED WORKS AT DOMESTIC AREA AND TECHNICAL AREA UNDER THE AOR OF 230SU
2026_MES_783440_1
AGE (I) AF/ASR/T-30/2026-27
Open Tender
Civil Works
Item Rate
120 days
ASSISTANT GARRISON ENGINEER (I) AF STN AMRITSAR
Class E and Category a(i) and a(ii)
8 documents required · 8 mandatory
₹500
AGE (I) AF AMRITSAR
₹19,406
8 Aug 2026
8 Aug 2026
4 Sept 2026
8 Aug 2026
28 Aug 2026
21 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | S&F Steel work in tubular sections (rectangular , round , square) including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 all as specified and directed by EIC. | 500 | Kg | - | - |
| 2 | S&F Rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates all as specified and directed by Engr-in-Charge . | 1,050 | Kg | - | - |
| 3 | Excavating in post holes( or similar holes) each n exc 0.5 cu.m. getting out and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed by EIC. | 15 | Each | - | - |
| 4 | M & L for PCC (1:3:6) type C-2 with using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed | 1 | Cum | - | - |
| 5 | S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. | 140 | Sqm | - | - |
| 6 | M&L MS plate(plain or chequred)channels,square cut or notched (ordinary and counter sunk)forming holes, without any attachment also fastening and fixing complete all as specified and directed by EIC. | 85 | Kg | - | - |
| 7 | S&F mild steel bolts purpose made with hexagonal or square head one end and screwed the other , or screwed both ends; each screwed end to be fitted with washers and one hexagonal nut exc.60cm long , having dia not exc 20mm all as specified and directed by EIC . | 50 | Kg | - | - |
| 8 | M&L for two coat of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description over 10cm width or girth not otherwise described including preparation of surface complete all as specified and directed. | 60 | Sqm | - | - |
| 9 | M&L for Brick work with sub class "B" bricks, straight or curved on plan exc 6 m mean radius , built in CM 1:6 complete all as specified and directed by EIC. | 35 | Cum | - | - |
| 10 | M&L for rendering 15mm thick cement plaster in cement mortar (1:4) with finished even and smooth without extra cement complete all as specified and directed. | 225 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.57 MB
appendixb.pdf
Additional Documents • 0.79 MB
BOQ_877783.xls
BOQ • 0.75 MB
genpages.pdf
Tender Documents • 1.35 MB
corr01.pdf
PDF • 0.73 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].