REPAIRS TO WALL FLOORING AND ROOF AT CERTAIN BLDG IN DGQA UNDER GE NORTH SANTA CRUZ MUMBAI

Amount

Taking down roof trusses of span upto 8.00 meters, coupled rafters or trussed beams complete all as specified and as directed by Engr-in-Charge

Dismantling timber in scantling 40 sqcm and over in section in any position in unframed work complete all as specified and as directed by Engr-in-Charge.

Demolition of stone slab and tiles of any description or thickness in floor, apron and vertical surfaces, laid bedded, joint and pointed in mortar and removing debris outside MD land complete all as specified and as directed by Engr-in-Charge.

Taking down chowkats or frame with shutters n exc 1.5 sqm each (without taking off shutters from the frames) including all fittings complete all as specified and as directed by Engr-in-Charge

Taking down chowkats or frame with shutters exc 1.50 but n exc 4.0 sqm each (without taking off shutters from the frames) including all fittings complete all as specified and as directed by Engr-in-Charge

Demolition of cement concrete reinforced of any description and on any position complete all as specified and as directed by Engr-in-Charge.

Dismantling asbestos cement (corrugated or semi corrugated ) sheets in roof coverings including ridges complete all as specified and as directed by Engr-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engr-in-Charge.

Dismantling of false ceiling/wall cladding any description including cover fillets all as specified and as directed

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm and removal of rubbish outside MD Land complete all as specified and as directed by Engr-in-Charge.

Supply and fix 35mm thick factory made plain framed panelled shutter 2nd class hardwood rail and style (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge. Make: M/S Goel Brothers, Raipur/M/S Pioneer Timber, Chandigarh/M/S Goyal Industries, New Delhi/M/S Jain Doors pvt Ltd, Haryana/M/S India Wood & Wood Pdts, Mangalore/M/s MP Wood Products, Indore/M/s A1 Teak Products, Indore/M/s Jain Wood industries( Brand : JAYNA)

Supply and fix 15 micron coloured aluminium sections for sliding or openable windows, ventilators, doors, partions etc including fabrication of frame & shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and as directed by Engr-in-Charge. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India Note:- (i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed.

Supply and fix in repairs 15 micron coloured aluminium anodised grill of design No DG-117, 10 mm thick, cut to required size/shape, and fixed in position with and including aluminium beading and frame complete all as specified and as directed by Engr-in-Charge. Make- DECOGRILLE of Associated group or equivalent make as approved by GE

Supply and fix 5.50mm thick sheet glass, ordinary quality, in square not exc. 0.5 Sqm in each pane complete all as specified and as directed by Engr-in-Charge. Make : Modi/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix plain solid straight chowkats, second class hardwood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good in cement concrete in frame complete all as specified and as directed by Engr-in-Charge.

Supply and fix mild steel hold fast confirming to Fe 290 grade E-165 complete all as specified and as directed by Engr-in-Charge.

Supply and fix butt hinges 100mm size cold rolled mild steel type complete all as specified and as directed by Engr-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed by Engr-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix extruded aluminium alloy handles fabricated types, anodised, of size 150 mm long complete all as specified and as directed by Engr-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminum anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy 300mm long, ISI marked complete all as specified and as directed by Engr-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Material and labour for preparation of new or previously untreated wood and wood based surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed. Make: Asian Paints/Nerolac Paints/Berger Paints/Shalimar Paints

Material and labour for Plain Cement Concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concete complete all as specified and as directed by Engr-in-Charge.

Material and labour Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge

All as per item No. 24 described here-in-before but except stone built in cement mortar 1:6.

Material and labour for Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses, hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40mm complete all as specified and as directed by Engr-in-Charge

Material and labour for raised pointing to random rubble, uncoursed or brought upto course in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.

Material and labour Pre-cast cement concrete block masonry 1:2:4 type B1, (using 20mm graded stone aqggregate), with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge.

Material and labour for Providing, cement concrete type B1 1:2:4 (using graded stone aggregates 20 mm) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, if directed including necessary form work complete all as specified and as directed by Engineer-in-Charge.

Material and labour rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4,including even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

Material and labour rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6,complete all as specified and as directed by Engr-in-Charge.

Material and labour hardcore broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface at transformer yard complete all as specified and directed by Engr-in-Charge.

Material and labour for 75mm thick Plain Cement Concrete (1:3:6) type C1,nominal mix (using 40mm graded stone aggregate) as in plinth protection & finished even and fair without using extra cement complete all as specified and as directed by Engr-in-Charge.

Material and labour for 100mm thick Plain Cement Concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed by the Engineer-in-charge

Material and labour for 25mm thick (average thickness) PCC (1:2:4), type B1, using 20mm graded stone aggregate as levelling course, laid to slope as required and finishing even & fair without using extra cement complete all as specified and directed by Engr-in-Charge.

Material and labour for vitrified ceramic coloured tiles (light shade), 10 mm thick, (square / rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match, including 15mm thick cement mortar 1:6 screed bed or bedding layer complete all as specified and as directed by Engr-in-Charge. Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles

Material and labour for glazed coloured ceramic tiles, 1st quality of size 350 x 250 x 7 mm thick or 450 x 350 x 7mm thick (or nearest size) on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in colour cement to match including backing coat 10 mm in CM (1:4) complete all as specified and as directed by Engr-in-Charge. Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles

M& L machine cut Kota stone slab flooring 20-25 mm thick over cement screed bed 15 mm in CM (1:3) base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer in Charge.

All as per item No. 38 described her-in-before but as in riser of steps, skirting, dados etc over a backing coat plaster 10mm thick in CM 1:3 complete all as specified and as directed by Engr-in-Charge.

Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed by Engr-in-Charge.

Material and labour for Preparation of new plastered surfaces of walls and applying two coats of cement base paint over primer complete all as specified and as directed by Engr-in-Charge. Make: SUPER SNOWCEM/DURGOCEM/SILVOCEM/AQUACEM

Supply and fix mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS. 1161-1979 grade St-240, complete all as specified and as directed by Engr-in-Charge.

Material and labour for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer with necessary scaffolding / shuttering etc complete all as specified and as directed. Make: Asian Paints/Nerolac Paints/Berger Paints/Shalimar Paints

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated, steel sheet 0.50mm thick (total thickness including coating) of any colour having tensile strength of 550 MPA as in cladding to wall, roof covering, fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge. Make; JINDAL /INDALCO/HINDALCO/ESSAR/ASSOCIATED Profiles and Aluminium Ltd.

Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick (total thickness including coating) of any colour having tensile strength of 550 MPA with as in roof covering, cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge. Make; JINDAL /INDALCO/HINDALCO/ESSAR/ASSOCIATED Profiles and Aluminium Ltd.

Material and labour in repair for anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1285 including all ceiling cleats, 4 mm dia GI wire suspender with necessary main tee 35.00 x 23.50 x 1.50mm , cross tee and wall angle of size 23.50 x 23.50 x 1.5 mm with 605 x 605 mm grid system including 12mm thick gypsum board with all connected accessories suitably placed in false ceiling grid as per manufacture instruction complete all as specified and as directed by Engr-in-Charge. Make: Gypsum board /Arm Strong/Ramco/Bisan

Material and labour for GI framework for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flangesof 15mm each and web of 45mm suspended from soffit at approx 900mm center to center with GI cleat and steel expansion fasteners with and including ceiling section ( n exc 1.20m length) of 0.55mm thick having curled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 centre to centre complete all as specified and as directed by Engr-in-Charge. Make: Gypsum board /Arm Strong/Ramco/Bisan

Material and labour for 12mm thick Perforated particle board tiles of size 600mm x 600mm for insulation and acoustic purposes fixed in position complete all as specified and as directed by Engr-in-Charge. Make for board: Gypsum board /Arm Strong/Ramco/Bisan

Material and labour Mild steel TMT bars 10 mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge

Material and labour for Mild steel TMT bars 5mm dia and over upto and including 10mm dia cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia as in stirrups,spacer,and binder complete all as specified and as directed by Engr-in-Charge

Vijay Enterprises

joshua construction

M/S Kumar Enterprises

S.N Enterprises