Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹7.7 Cr
EMD Value
₹15.4 L
Closing Date
29 Oct 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Station Development
Above/Below/Par
GEN.ADMN.
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. Please follow GCC-April-2022 for Annexure-VIB. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. [NOTE: Failing of submission of Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet shall be liable for rejection.] [NOTE: Client certificate from other than Govt Organization should be duly supported by Form 16A/26AS generated] through TRACES of Income Tax Department of India.]
Any work involving supply, installation of train indication board/ coach guidance system/PA system/ Clock/IPIS/ Touch Screen enquiry system/ Display board.
18 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
All documents in support of fulfillment of eligibility criteria with respect to completion of similar nature of work for Technical Eligibility Criteria and Total contract value for Financial Eligibility Criteria should be submitted/ uploaded online in the website with scanned copy at the time of tender bidding with details showing in Annexure I, IV. No post tender communication, in any form will be made or entertained, after opening of tenders, in this regard. Railways may however call for the originals of the credentials for verification or any clarifications/confirmations on the contents of the documents submitted. Eligibility of tenderers shall be decided solely of the basis of the documents submitted along with the tender offers and any subsequent document whatsoever submitted in this connection would not be given any cognizance for finalization of the tender.
Payment through Letter of Credit is applicable for this tender as per Railway Board's letter no 2017/ACII/9/10 Pt I dated 20.02.2018 & 2018/CE-I/CT/9 dt. 04.06.2018 (Annexure B & C attached).
INSTRUCTION TO BIDDERS: A] The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of his obligations or liabilities hereunder nor will it affect any rights of the railway there under. B] In case of any wrong information submitted by tenderer, the contract shall be terminated, Earnest Money Deposit [EMD], performance Guarantee [PG] and Security Deposit [SD] of contract forfeited and agency barred for doing business on entire Indian Railways for 5[five] years.
Shramik kalyan Contractor[s] are requested to get themselves registered on Railways Shramik kalian portal at www.shramikkalyan.indianrailways.gov.in after issuance of letter of acceptance.
GST has been considered during assessment of this instant tender.
Contractor(s)/ Bidders are requested to refer to Clause 46A of Indian Railways Standard General Conditions of Contract'2022 with up to date correction slip for Price Variation Clause (PVC) in works contract. Item no 46A.1 of GCC 2022: Price Variation Clause (PVC) shall be applicable only in tender having advertised value above Rs. 2 Crores. [Authority: Executive Director/Civil Engineering(G), Railway Board's letter No.2022/CE-I/CT/GCC-2022/Policy dated 14.07.2022]
For further details related to 'Bid Security' Bidders are requested to please connect para no 23 of the tender documents.
Bidders are requested to refer to para no 9 of tender document [Para 41 & 42 of Part II Standard General Conditions of Contract for "Variations in extent of Contract" of GCC 2022]
In case Agency desires submission of Bid Security in the form of Bank Guarantee, then please refer to para no 23(3) of Instruction to Tenderers for e- tenders, chapter I for further guidance. [Clause 5.0 of Part I of GCC 2022]
Bidders may also upload any relevant document as deemed fit.
Signal & Telecommunication work in connection with Provision of central FOB 12M wide including ramp in connection with development of Amrit Bharat station at BWN, BHP, RPH, ABKA, NDAE, KWAE, BLY, SHE, CGR,TAK, AZ & KGLE and Provision of 6m wide FOB with lifts at all platforms at Konnagar (KOG) Station & Uttarpara (UPA) Station in HWH Division and other near by adjacent stations SRP Station and others under ABSS and Trip Maintenance / Advance Inspection centre for inspection and maintenance activity of Electric locomotives at Trip Electtric Loco and Elec Loco Shed, Bamangachi, Howrah, Supply and installation of Railnet connectivity for proposed new MET LAB building at C&W Workshop LLH and Extension of Existing Pit 04 with associated infrastructural facilities for maintenance of 24 LHB coaches in rake at Chitpur Kolkata Terminal in Eastern Railway.
DCPM-GS-SNT-HWH-03-26-27~ER
DCPM-GS-SNT-HWH-03-26-27
Open
Works - General
6 Months
Kolkata, West Bengal
₹0
₹15.4 L
7 Oct 2026
7 Oct 2026
15 Oct 2026
282 items across 1 schedule · ₹7,68,72,269.18 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Termination of Outdoor Cables (Main Cables /tail cables) in location boxes, cable termination rack in relay room, station building, etc. The item includes dressing of cables and wires with dressing threads as per standard practice. All material required for this item will be supplied by the contractor (Lugs, eyelets, Power cables should be terminated with suitable lugs/eyelets wherever applicable). SOR ITEM NO. 0424 | Per Conductor | 5530.00 | 6 | 33,180 |
| 2 | Supply of full size apparatus case (GKP type) (as per Drawing No. SW SK NO. 4/90 & other applicable GKP SW Drawing). This includes supply of a location box (GKP type) with 'E' type lock & key, fitted on the location door on both side, E Type lock (ward No. will be specified by Engineer-in Charge) as per RDSO Drg. No. SA-3376 and Key to Drg. No. SA-3377 as per RDSO Drawing No. S- 11500. Inspection: RITES/Consignee. SOR ITEM NO. 1101 | Numbers | 10.00 | 17,543 | 1,75,430 |
| 3 | Casting, concreting and curing of concrete foundation (in ratio 1:3:6), erection and installation of full size apparatus case as per Drg. No. S&T/C-6/98(NKG). This includes the cost of all materials required for fixing holding down bolts, casting, concreting. Note: Bolts, nuts and washers, bitumen compound to be supplied by contractor and bitumen compound to be used in between apparatus case and foundation. This also includes the bottom of apparatus cases filled with sand and the outside covered with masonry work and neat cement plastering. Note: Painting the apparatus case inside and outside with one coat of red oxide, two coats of aluminium paints outside and white paint inside. SOR ITEM NO. 1102 | Numbers | 10.00 | 13,705 | 1,37,050 |
| 4 | Fixing by slotted angle, wiring of terminal strips, hylam strip, relays, fuses with base, fixing of HDHMR shelves for full size apparatus case with Termination & Earthing of cables and wiring with lettering both inside and outside as required including supply of slotted angles, ferrules for marking and miscellaneous materials per location to be supplied by contractor (all materials except Wires, relay, terminal strips, Bakelite strip, fuses with base and HDHMR shelves to be supplied by the contractor). It includes letter painting both inside and outside as per ER practice. NB- Multi strand cables and power cable to be terminated with proper lugs and required buss bar etc. to be supplied by the contractor. Inspection: Consignee. SOR ITEM NO. 1103 | Numbers | 10.00 | 6,089 | 60,890 |
| 5 | Supply of HDHMR (High Density, High Moisture Resistance) Shelf for Full Location Box Size 950 x 400 x 25 mm. Inspection: RITES/Consignee. SOR ITEM NO. 1107 | Numbers | 8.00 | 825 | 6,600 |
| 6 | Supply of Phenolic laminated Sheet/Hylam sheet, grade P3 in standard size of 1220 X 1220 x 10 mm. as per Spec. No. IS 2036 of 1995 or latest. Test report of manufacture to be supplied. Inspection: RITES/Consignee. SOR ITEM NO. 1109 | Numbers | 4.00 | 5,552 | 22,208 |
| 7 | Alteration/modification in the existing location boxes (full size), fixing of equipment's, cable insertion, termination, wiring, testing & commissioning, two coat painting, lettering to suit the circuits as per approved wiring diagrams. This includes filling with sand and plastering the same. SOR ITEM NO. 1110 | Numbers | 6.00 | 3,507 | 21,042 |
| 8 | Dismantling of the location box including all its accessories & concrete foundation. SOR ITEM NO. 1112 | Numbers | 8.00 | 820 | 6,560 |
| 9 | Shifting/lifting of location box to facilitate earthwork of Engg/Con.This includes filling with sand and plastering inside location box. | Numbers | 8.00 | 2,759 | 22,072 |
| 10 | Painting of existing FULL SIZE apparatus cases without disturbing the terminations and equipments inside. The work involves scraping of old paint, applying two coats of Aluminium paint outside & two coats of white paint inside apparatus cases, painting of termination, equipment and number particulars on apparatus cases as instructed by Railway representative at site (Paints and all other miscellaneous materials required for the work shall be supplied by the Contractor) Note: Item applicable for alterations and maintenance works. SOR ITEM NO. 1113 | Numbers | 10.00 | 1,774 | 17,740 |
| 11 | Trenching under Rails for crossing the track (Track Crossing) and refilling of trenches. The track crossing shall be done at right angles. The depth of the cable trench shall be 1.2 meter below the rail flange. The ballast shall be stacked separately while making the trench and the earth soil shall be stacked separately. While re-filling the trench, the earth soil has to be filled first to the ground level and the ballast has to be properly put in the track. This work has to be done under supervision of the supervisor of S&T. SOR ITEM NO. 1228 | Metre | 400.00 | 1,128 | 4,51,200 |
| 12 | Cement concrete work for miscellaneous items in the ratio 1:3:6. Items include ramming, curing and plastering with cement & sand mixture (aggregate not exceeding 3.8 cm.) (Aggregate cement & sand to be supplied by the contractor). HERE THE UNIT 'JOB' = PER CU. MTR. | Job | 200.00 | 4,533 | 9,06,600 |
| 13 | Supply of basic material to construct unit maintenance free earth as per RDSO Specs. No RDSO/SPN/197 Ver.1.0 or latest and conforming to RDSO Drg. No. SDO / RDSO/ E&B/001 or Latest. Necessary testing certificate of UL, IEC to be produced. I t consist o f following: (a) Copper bonded steel electrode of 3.0 m long, 17.2 mm dia with copper bonding thickness of minimum macrons and UL listed and marked = 1 no. (b) Earth enhancement material supplied in sealed bags o f minimum 1 0 k g = 3 nos. (c) Copper strip of 150x25x6 mm, to terminate earth rod - 1 no. (d) Copper strip of 300x25x6 mm (MEEB) = 1 no. (e) Copper strip of l50x25x6mm (SEEB) = 1 no. (ii) Supply of 35 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting main earth electrode to MEEB in the equipment room in duplicate.(minimum 10 meter) (iii) Supply of 16 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting MEEB to SEEB and SPD to MEEB (minimum 10 meter ) (iv) Supply of 10 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting various equipments to SEEB (v) Supply of copper lug sleeve for 3/16 cable Inspection: RDSO | Lot | 10.00 | 15,147 | 1,51,470 |
| 14 | Installation of Unit Maintenance Free Earth as supplied in above item. I t includes ( i ) Digging the earth to the required depth. (ii) Insertion of electrode. (iii) Filling of earth enhancing compound (Approx.30 Kg) (iv) Provision of exothermic weld connections to copper tape of 25 mm x 6 mm x 150 mm to the earth electrodes. All material tools and features required for weld will be arranged by contractor. (v) This also includes CC cover 1.5 ft x 1.5 ft. 1 ft wall thickness 2 inch with cover 3 inch thickness. Cables 35 Sq mm/ 16 Sq mm/10 sq mm for connecting earth to busbar, busbar to busbar and bus bars to various equipments. Earth electrode of 17.20 mm dia and 3.00 meter long high tensile low carbon steel circular rods molecularly bonded with copper a n d o u t e r surface (minimum copper bonding thickness o f 2 5 0 microns to made requirement of under writer's laboratories (UL) 467- 2007 or latest. Copper strips of 150 mm x 25 mm x 6 mm to be welded with each earth electrode, copper strips of 300 mm x 25 mm x 6 mm for main equip- potential bus bar, copper strips of 150 mm x 25 mm x 6 mm sub equip- potential bus bar in relay room, power room and panel room. GI strip 25 mm x 2 mm for ring formation of earth pits Earth enhancement material in bags for each Earth Electrode. Inspection chamber of site 300 mm x 300 mm x 300 mm (Inside dimension) of approximate 50 mm thick with pulling hooks to cover the earth pits. Note: The installation of this item shall be carried out by the contractor as per RDSO Specs. No RDSO/SPN/197 Ver.1.0 or latest and conforming to RDSO Drg. No. SDO / RDSO/ E&B/001 or Latest.Inspection: Consignee | Set | 10.00 | 3,761 | 37,610 |
| 15 | Supply of earth electrode (GI PIPE) as per CSTE/ER's (Drg. No. SI/TYP/0097 dated 25.03.25). Inspection: By RITES [for value of material above Rs.5.0 lakhs]. Inspection: RITES/Consignee. SOR ITEM NO. 1320 | Numbers | 50.00 | 1,886 | 94,300 |
| 16 | Supply of MS FLAT (Spec. No.226 STD or latest) of size 35 mm. x 6 mm. as per CSTE/ER'S DRG. NO. S&T-1/2007 (or latest). (STANDARD MINIMUM LENGTH OF 5M OR MULTIPLE OF 5M) Inspection: Consignee.SOR ITEM NO. 1321 | Numbers | 50.00 | 230 | 11,500 |
| 17 | Fixing of earth electrode including laying and installation of MS flat of size 35 mm. x 6 mm. with length 5 mtr. or as per extant practice of Eastern Railway. As per PCSTE/ER's Drg. No. SI/TYP/0097 dated 25.03.2025 or latest. For apparatus cases, signal post & other equipment as per instruction of site engineer. Provision for fixing MS flat at apparatus cases/ signal post/other equipment should be made by the firm at site. Where required necessary holes to be drilled on the MS Flat. Full threaded bolts of 10 mm. dia. and length 40 mm should be welded in the apparatus cases in such a way that the MS flat at the apparatus case end can be fixed from outside or from inside (bolts of 10 mm. dia. and length 40 mm. should be supplied by the contractor). Welding arrangement with accessories and welding materials should be arranged by the contractor for fixing of bolts at equipment end where required as per instruction of site engineer. All hardware and other miscellaneous materials required for installation to be supplied by the contractor except earth electrodes and MS flat. Sig. Cable as provided by Railway is also to be laid and terminated on Earth Electrode and to GI Wire/GI Flat in Location Box. SOR ITEM NO. 1322 | Numbers | 50.00 | 1,161 | 58,050 |
| 18 | Provision of cement concrete enclosure for earth electrodes as per CSTE/ER's (Drg. No. SI/TYP/0097 dated 25.03.25). Inspection: Consignee. SOR ITEM NO. 1323 | Numbers | 58.00 | 720 | 41,760 |
| 19 | Arranging unskilled labour at S&T Stores for loading/ unloading/stacking of departmental materials & others assist with S&T Official as per Site Engineer SOR ITEM NO. 1802 | Man-Days | 1520.00 | 587 | 8,92,240 |
| 20 | Supply of Disconnect Terminal Block, Screw less type, 4- wire front entry (Two in-put & Two out-put) as per RDSO Spec. No. RDSO/SPN/189/2004 With latest amendments. The color will be decided by the Engineer - in - Charge. (Preferably In Blue, Red & Grey Colors in the ratio of 1:2:3) Inspection: RDSO. SOR ITEM NO. 0425 | Numbers | 1650.00 | 69 | 1,13,850 |
| 21 | Shifting of Exposed cables. The item includes Removal of exposed cable from existing trench & laying the same in new trenches. Digging, Placing of capping/ Half round RCC pipe covered separately. | Kilometre | 9.00 | 6,862 | 61,758 |
| 22 | Earthwork in filling in embankment, guide bunds, around buried type abutments, bridge gaps, trolley refuges, rain bunds if provided, platforms etc. with earth excavated from outside railway boundary entirely arranged by the contractor at his own cost as per RDSO's latest guidelines and specifications and special condition of contract including all leads, royalty, lifts, ascents, descents, crossing of nallahs or any other obstructions. The rates shall include all dressing of bank to final profile, demarcation and setting out of profile, site clearance, removal of shrubs, roots of vegetation growth, heavy grass, benching of existing slope of old bank, all handling/re-handling. Taxes, Octroi and royalty etc. as a complete job. Cut trees shall be property of railways and to be deposited in the railway godown unless specified otherwise in the Special conditions of contract. SOR ITEM NO. 1124 | cum | 120.00 | 162 | 19,440 |
| 23 | Extra for mechanical compaction of earth/blanketing material filled in embankment with contractor's rollers of suitable capacity, type and size to achieve specified density as per specification, testing as per IS codes incl. cost of water, T&P consumable material and all labour as a complete job. The work is to be executed as per Latest edition of "Guidelines for Earthwork in Railway Projects" issued by RDSO, Lucknow. SOR ITEM NO. 1225 | cum | 760.00 | 19 | 14,440 |
| 24 | Removal of excavated/slip earth/debris/malba from the site of works to any other place outside Railway land/premises, including all excavations, handling, re- handling, loading, unloading and leading, etc. all labour and material as a complete job. Removal of Earth (all kinds of soils)/ROCKS, BOULDERS including mud/slush, slipped earth in catch water drains, side drains, over berms in cutting, water way of bridges, over coping of toe/breast/retaining walls etc. including crossing of nallah, railway tracks, making/repairing approach roads if required, all lead, lift, ascent, descents, or any other obstruction. Earth spoils to be dumped outside the cutting or railway embankments as per direction of Engineer in charge. SOR ITEM NO. 1226 | cum | 120.00 | 162 | 19,440 |
| 25 | Supply of PVC insulated multi strand, single core copper conductor of size 3/0.75 mm as per IS 694:20 10 and RDSO Specn. No.IRS: S- 76/89 (Amnd-3) or latest. Each coil should be of 100/200/500 meters length. Colour of the wire which is required will be specified by the Engineer incharge. Inspection: (i) RDSO/RITES if value of item in work more than 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in w o r k l e s s t h a n 5 l a k h s a s p e r extant instructions by Railway Board. | Kilometre | 1.00 | 17,749 | 17,749 |
| 26 | Supply of 1 x 6 Sq.mm. (Red/Black/Green multi strand copper power wire as per IS:694:20 10 or latest, 84 conductor each dia 0.30mm +/- 0.01 with insulation thickness of 0.8 mm and nominal conductor resistance of 3.3 ohms/km and test parameters as per RDSO Specn. No.IRS:5-76/89(Amnd.3) or latest.Colour of the wire which is required will be specified by the Engineer incharge. Inspection: (i) RDSO/RITES if value of item in work more than 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions b y Railway Board. | Metre | 350.00 | 42 | 14,700 |
| 27 | Supply of 1 x 10 (140/0.3) Sq.mm. multi strand copper power wire as per RDSO Spec. No. IRS:S-76/89 (Amdt.3) or latest. The color of the wire which is required will be specified by the Engineer in charge. Inspection: RDSO. SOR ITEM NO. 0403 | Metre | 200.00 | 134 | 26,800 |
| 28 | Supply of 1 x 16(126/0.3) Sq.mm. multi strand copper power wire as per RDSO Spec. No. IRS:S-76/89 (Amdt.3) or latest. The color of the wire which is required will be specified by the Engineer in charge. Inspection: RDSO. SOR ITEM NO. 0404 | Metre | 400.00 | 173 | 69,200 |
| 29 | Supply of 1 x 25 (196/0.4) Sq.mm. multi strand copper power wire as per RDSO Spec. No. IRS:S-76/89 (Amdt.3) or latest. The color of the wire which is required will be specified by the Engineer in charge. Inspection: RDSO SOR ITEM NO. 0405 | Metre | 400.00 | 342 | 1,36,800 |
| 30 | Circuit wiring/jumpering as per circuit diagrams in the relay racks/IDF rack tag blocks. This includes preparation of Jumper sheets by wire-man duly checked by firm's site supervisor & wire to wire testing as per circuit diagram. Any wrong jumper done by a wireman will not be paid & correction shall be done free of cost. Jumper wires will be supplied & issued by Railways. Good quality solder resin core to be supplied by contractor for soldering of Jumper wires. Soldering of jumper wires to be done after completion of testing by Railways. This item is to be used for only Alterations in any EI/PI/RRI. Inspection: Consignee. SOR ITEM NO. 0411. HERE THE UNIT 'JOB' = PER JUMPER. | Job | 500.00 | 15 | 7,500 |
| 31 | Supply of PBT ARA terminal 1 WAY 25 mm., Drg. No. S- 23741A, Alt-4. as per IRS SPECN.NO. IRS:S-75-2006 (Rev.2) OR latest. Material to be procured from RDSO's approved firm only. Inspection: RDSO. | Numbers | 20.00 | 98 | 1,960 |
| 32 | Supply of PBT ARA terminal 6 WAY 25 mm., DRG.NO.23756, ALT-3. as per IRS Spec. No. IRS:S- 75/2006 (Rev.2.) or latest. Material to be procured from RDSO's approved firm only. Inspection: RDSO. SOR ITEM NO. 0419 | Numbers | 105.00 | 612 | 64,260 |
| 33 | Supply of Non deteriorating type FUSE as per Spec No. IRS:S-78/2006 with latest amendments rating (2A/6A/10A/16A/20A) type, cylindrical. Inspection- RDSO. SOR ITEM NO. 0420 | Numbers | 15.00 | 77 | 1,155 |
| 34 | Transferring of Signaling/Telecom cables from existing Location box to New Location box . The work include breaking/ Dismantling of Existing foundation of locations, excavating and removing / segregating coils of 2C/6C/12C/19C/24C/30C/Quad cables which may be about 10 mtrs. in length. These cables are to be disconnected and removed from the existing location one by one as per the instruction and under the supervision of Railway staff present at site. The cable is then to be inserted and terminated in new location box. The item includes neatly dressing of cable, making wiring tree etc. The material required to dressing /1acing will be arranged by contactor. The work is required to be done systematically and with due precaution during the block or disconnection within the time that may be allowed. The excavation work to be done carefully without damaging the cable to avoid undue failure. (Termination charges will be given separately). Note: Proportionate payment will be made if cable of other length. One No unit One cable of 10 m length}. | Numbers | 10.00 | 362 | 3,620 |
| 35 | Supply and laying of split DWC pipe of 250/217 mm. diameter in already dug cable trenches as per Drawing No.SK.9/11. The unit of RMT means two split pipes of 1 Mtr. each. Inspection: RITES/Consignee. SOR ITEM NO. 1212 | Running Metre | 1350.00 | 754 | 10,17,900 |
| 36 | Laying of HDPE/DWC/GI Pipes. SOR ITEM NO. 1205 | RM | 400.00 | 75.9 | 30,360 |
| 37 | Breaking of metal/tar road and refilling after laying the cables. Repair of pucca roads to original state in level crossing area after cable laying. SOR ITEM NO. 1220 | Metre | 310.00 | 295 | 91,450 |
| 38 | Disconnection & Reconnection of All Signalling Equipments like Cables/TLJB/Point Machine G.Fitting/Point JB/BPAC Track Device etc. immediate before and after the work during block period. This Includes cost of the Releasing of Signalling equipmets and Reconnection of the same after the work. This includes 1 Fitter, 1 Black Smith, 1 Hammer Man, 1Cable Jointer, 1 Bonding fitter, 4 Khalasis. | Day | 40.00 | 4,643.95 | 1,85,758 |
| 39 | Supply of OFC single mode 6 fibre armoured cable, conforming to TEC Spec. No. GR/OFC-02/03.SEP.2003 or Latest. as per Annexure Inspection: Consignee | Metre | 4000.00 | 32 | 1,28,000 |
| 40 | Supply of 20 pair PIJF Cable, 0.63mm, IRS: TC 41/97 (Amd 3) or Latest | Kilometre | 2.00 | 3,28,040 | 6,56,080 |
| 41 | Supply of Polythene Insulated Polythene Sheathed Armoured Jelly Filled Telephone Cable with Poly- Almunium moisture barrier 0.63 mm dia. 10 pair to Spec. No. IRS-TC-41/97 with latest ammendments if any. | Kilometre | 2.00 | 1,30,831.97 | 2,61,663.94 |
| 42 | Supply of FR CAT-6 UTP Cable suitable for 10BASE- T/100BASETX/and 1000BASE-T(Gigabit Ethernet). Make: DLINK /AMP /Avaya /Krone /Bestne t/Aambernet. Inspection: Inspection: RITES/Consignee. SOR ITEM NO. 1442 | Metre 12200.00 | — | 25 | 3,05,000 |
| 43 | Supply of STP CAT-6 Cable (305 meter Box .as per Annexure Inspection: Consignee | Metre | 800.00 | 37 | 29,600 |
| 44 | Supply & installation of speaker cable 2 core, Size: 1.5 Sq. mm. (16AWG), Thickness of Insulation: 0.7 mm., shielded, complaint to IS-694:2010, Conductor Material: Copper, Make: Finolex or similar. Inspection: Consignee. SOR ITEM NO. 14174' | Metre | 8000.00 | 47 | 3,76,000 |
| 45 | Supply of power cable 3 core 2.5 Sq. mm. multi strand (36/0.3 mm. dia.) cable as per IS 694:1990 reaffirmed 1995 or latest suitable for railway electrification area shall be of reputed make like Delton, LAPP, Finolex, or Similar. Inspection: Consignee. | Metre | 5000.00 | 77 | 3,85,000 |
| 46 | Supply of Power Cable 3 X 4 SQ. MM unarmoured as per IS-694 . PVC insulated flexible 3 core x 4 sq. mm multistrand power cable provided for display boards shall conform to specification no IS694: 1990 reaffirmed 1995 or latest of reputed brand. Inspection: Consignee | Metre | 4000.00 | 166.52 | 6,66,080 |
| 47 | Supply of optic fiber splice closure (24 fiber) as per tec . Specification no. G/OJC-02/01, March'99 with latest amendment or latest including all miscellaneous items and consumables for fiber splicing. Inspection: - by consignee. | Numbers | 30.00 | 3,558 | 1,06,740 |
| 48 | Splicing /termination of OFC as per site requirement | Numbers | 802.00 | 210.05 | 1,68,460.1 |
| 49 | Supply of Fiber Distribution Management System (FDMS- 6F) 06 port, Single Mode, Simplex Fiber Optic Patch Panels, 19 inch 1 U Rack Mountable with SC connector with all accessories, Make: Syrotech/Drone Edge/Digisol or similar. Model: SY-LIU-6-XXX/similar. Inspection: RITES/Consignee. SOR ITEM NO. 1412 | Numbers | 35.00 | 8,765 | 3,06,775 |
| 50 | Supply and Installation of 19"rack mouted 12 port Fiber management system and termination of OFC and Splicing of all the Fibers inside theTerminal Box with provision oftaking out OFC as required. Thisincludes supply of all Installation accessories including the pigtailswith connector as per order ofpractice for installation andcommissioning of Optical FiberSystem. INSPECTION :CONSIGNEE | Numbers | 10.00 | 5,746.63 | 57,466.3 |
| 51 | Supply and Installation of 19"rack mouted 24 port Fiber management system and termination of OFC and Splicing of all the Fibers inside theTerminal Box with provision oftaking out OFC as required. Thisincludes supply of all Installation accessories including the pigtailswith connector as per order ofpractice for installation andcommissioning of Optical FiberSystem. INSPECTION :CONSIGNEE | Numbers | 10.00 | 7,782.82 | 77,828.2 |
| 52 | Laying of STP/UTP CAT-6/Power Cable/LS cable through flexible PVC Conduit Pipe/GI Pipe/HDPE Pipe (where necessary) as per direction of the Rly. Representative, including any fixing of cables/PVC pipe/PVC Casing on wall/shed with suitable clamps (the clamps and screws should be made of Stainless steel). All the fixing materials including Collar, bend, junction etc. shall be supplied by the contractor. This also includes transportation of cable, PVC Pipe, GI Pipe, HDPE Pipe etc. to the site. | Metre 12000.00 | — | 19 | 2,28,000 |
| 53 | Supply of 40 mm dia permanently lubricated HDPE telecom: ducts (with chord) as per RDSO SPEC.NO. RDSO/SPN/TC/45/2013 REVISION 2.0 or Latest with latest amendments in length of 1000 mtrs/roll For each km. Of HDPE duct following items are to be supplied (a) end plugs-2 nos. (b) cable sealing plugs - 2 nos. (c) plastic couplers slip fit/push fit type-2 nos. (d) end plugs to be provided along with drum 2 nos. (Note: The color of duct will be as per Technical circular -124. For station area the color of HDPE duct will be brown. The colour of the duct is to be confirmed by the in- charge of the work before supply) | Kilometre | 10.00 | 79,596 | 7,95,960 |
| 54 | Laying of HDPE pipe duct, 40/33 mm in trenches and protective works including pulling of mono-mode armoured OFC cable (24 fibres) through duct in trenches and as advised by site engineer. Note:- (1) the contractor will take over the OFC cable from railway store to site of work duly checked the continuity of each fibre from end to end . (2) before & after laying of optical fibre cable through duct, continuity test from end to end of each fibre to be made by the contractor to ensure availability of all 24 fibre duly certified by the site engineer. | Kilometre | 10.00 | 7,590 | 75,900 |
| 55 | Supply of 25 mm PVC conduit pipe as per ISI medium grade.as per Annexure Inspection: Consignee | Metre | 1518.00 | 28.39 | 43,096.02 |
| 56 | Supply of Light class GI pipes 50 mm. dia. (thickness 2.9 mm) as per IS 1239 (Part1):2004 or Latest with socket & coupling. Inspection: RITES/Consignee. | Metre | 614.00 | 638 | 3,91,732 |
| 57 | Laying & Fixing of GI pipes 50 mm./100 mm. as per IS 1239 (Part1):2004 with socket & coupling on culverts and bridges. It includes installation of all material required for fixing arrangement. The contractor will install a flexible/corrugated HDPE pipe at the end of the GI pipe along with any masonry work (if required) to protect the cables from sharp edges and sudden bends. SOR ITEM NO. 1203 | Metre | 1014.00 | 360 | 3,65,040 |
| 58 | Cutting of platform surface (tile/slab/concrete) for a depth of 20 cm. & width of 10 cm. & refilling /reconditioning/ repairing the platform after laying pipe & cable. Cutting should be done with marble cutting machine in proper manner & restore the same as before in such a manner that the aesthetic of PF is not disturbed. SOR ITEM NO. 1229 | Metre | 1800.00 | 437 | 7,86,600 |
| 59 | Excavation of trench at a of Depth of 1200 mm. and width of 300 mm., including marking of cable alignment, clearing of jungle, roots of trees, bushes, refilling with excavated soil, ramming and consolidation after laying of cables complete to the finished item of work in all type of Soil. NOTE: In case 1.2 m. depth of the trench is not achievable due to site conditions approval of officer in charge is to be obtained and payment shall be made on a prorate basis. SOR ITEM NO. 1227 | Kilometre | 11.00 | 97,822 | 10,76,042 |
| 60 | Laying of S&T Cables of various cores/pairs/quads in trenches/GI pipes/RCC pipes/DWC pipes/Trunking. SOR ITEM NO. 1230 | Metre 85000.00 | — | 7 | 5,95,000 |
| 61 | Supply of Platform Data Controller (PDC) conforming to System requirement of RDSO Specification No. RDSO/SPN/TC/108/2019, Ver.1.0 . Inspection: RDSO/Consignee. SOR ITEM NO. 1494 | Numbers | 30.00 | 40,272 | 12,08,160 |
| 62 | Installation, testing and commissioning of Platform data controller (PDC) as per RDSO Spec. No. RDSO/SPN/TC/108/2019, Ver.1.0 as per instruction of site in charge with all required accessories and fixing arrangements to commissioning the item. sor item no. 1495 | Numbers | 30.00 | 3,099 | 92,970 |
| 63 | Supply of single line double faced Platform Display boards for displaying information of single train & all accessories as per RDSO Spec. No. RDSO/SPN/TC/108/2019, Ver.1.0. Inspection: RDSO/Consignee. | Numbers | 40.00 | 1,90,480 | 76,19,200 |
| 64 | Installation, testing and commissioning of single line double faced Platform Display boards for displaying information of single train as per RDSO Spec. No. RDSO/SPN/TC/108/2019, Ver.1.0. This also includes supply of all other materials required for installation such as clamp, hanger, angles etc. | Numbers | 36.00 | 12,588 | 4,53,168 |
| 65 | Supply of LED based Single faced Monocolor (MLDB) Two Line Train Arrival/Departure display board & all accessories as per RDSO Spec. No. RDSO/SPN/TC/108/2019, Ver.1.0 . Inspection: RDSO/Consignee. | Numbers | 13.00 | 15,368 | 1,99,784 |
| 66 | Installation, testing and commissioning of LED based Single faced Monocolor (MLDB) Two Line Train Arrival/Departure display board as per RDSO Spec No: RDSO/SPN/TC/108/2019, Ver.1.0. This also includes supply of all other materials required for installation such as clamp, hanger, angles etc. | Numbers | 13.00 | 12,509 | 1,62,617 |
| 67 | Releasing of TIBs along with acessories and cable and reinstallation of the same as per site requirement | Numbers | 19.00 | 27,000 | 5,13,000 |
| 68 | Releasing and re Installation of Double face Coach Guidance Board | Numbers | 25.00 | 12,000 | 3,00,000 |
| 69 | Installation, testing and commissioning of Coach Indication Display board ( Double Face ) in open area including supply, fabrication and erection of pole, angles, fastening and rain hood , Inspection: By authorized representative of railway. | Numbers | 25.00 | 5,586.3 | 1,39,657.5 |
| 70 | Shifting of various cables for execution of the work | Metre | 3000.00 | 100.3 | 3,00,900 |
| 71 | Supply of LED based Single faced Monocolor (MLDB) Five Line Train Arrival/Departure display board & all accessories as per RDSO Spec. No. RDSO/SPN/TC/108/2019, Ver.1.0 or latest. Inspection: RDSO/Consignee. | Numbers | 6.00 | 4,59,675 | 27,58,050 |
| 72 | Installation, testing and commissioning of LED based Single faced Monocolor (MLDB) Five Line Train Arrival/Departure display board as per RDSO Spec. No. RDSO/SPN/TC/108/2019, Ver.1.0 or latest. This also includes supply of all other materials required for installation such as clamp, hanger, angles etc. | Numbers | 6.00 | 24,415 | 1,46,490 |
| 73 | Supply , installation commissioning of True colour video outdoor display unit ( 1024 mm X 1792 mm ) as per specification attached in Annex . Inspection by Rites. This includes laying of OFC & CAT 6 cable with supply of suitable fixing arrangement of pole mounted/ wall fixing as per site requirement ( All material including PVC pipe , fixing material will be supplied by Contractor) , along with integration with existing IPIS system of Howrah Station | Numbers | 1.00 | 2,62,827.02 | 2,62,827.02 |
| 74 | Supply, Installation, testing and Commissioning of Platform dual face, 4 digit, GPS synchronised digital clock as per RDSO Spec. No. RDSO/SPN/TC@47>47@2008 Rev. 3, Amdt.1 and Amdt.2 , with LED of Blue/Red/White color and size approximately 762 x 381 x 228 mm. It also includes all fitting arrangements. (Color to be decided by Railways). Inspection: RDSO/Consignee. SOR ITEM NO. 14119 | Numbers | 56.00 | 47,020 | 26,33,120 |
| 75 | "Supply of 30 watts Horn speaker with 30 watt tapping, matching transformer and driver unit, make reputed as UHC-30XT of Boss/Ahuja make or similar.Inspection Consignee" | Numbers | 37.00 | 2,362.13 | 87,398.81 |
| 76 | Supply of high fidelity PA horn speaker IP-65 rated model AMH-402T, make Ahuja or similar. | Numbers | 459.00 | 6,698 | 30,74,382 |
| 77 | Installation of Horn type Loud speaker. | Numbers | 61.00 | 684 | 41,724 |
| 78 | Supply and installation of column speaker 15W with LMT all metal weather resistant, including fixtures and other material required. Inspection: Consignee. SOR ITEM NO. 14122 | Numbers | 30.00 | 1,558 | 46,740 |
| 79 | Supply and installation of Gigabit Media converter. Inspection: RITES/Consignee. SOR ITEM NO. 1444 | Numbers | 30.00 | 12,474 | 3,74,220 |
| 80 | Supply of V.F. transformer 1220:600/470/:1220 as per IRS:TC-22/76 or latest. Inspection: Consignee.SOR ITEM NO. 14133 | Numbers | 9.00 | 830 | 7,470 |
| 81 | Supply & installation of Rack 19" wall mount 6U/500MM D with front glass door and lock and key including the following: 1. I U Cable manager - I No. 2. 1 U Cantilever tray - I No. 3. AC distribution box 5X5 amps - I No. 4. Front panel H/W PKT of 10 Sets - I No. 5. Cooling fan of 230V AC operated. Inspection: Consignee. SOT ITEM NO. 1440 | Numbers | 31.00 | 4,323.39 | 1,34,025.09 |
| 82 | Supply and installation of Wall mounted 19",9U Steel Rack in 600X500mm Section with fan and 6 no sockets and accessories. Make: HCL, VALRACK & APW or Similar. INSPECTION : CONSIGNEE. | Numbers | 21.00 | 9,623 | 2,02,083 |
| 83 | Supply, installation and complete indoor wiring of 19 inch (42U) covered Rack of size 2035 mm. x 600 mm. x 600 mm. (Approx.). The rack shall be complete with all fittings for housing SDH equipments, Primary MUXES, DDF, MDF using crone modules and other equipments like runway ladders etc. completely wired and equipped with integrated protection modules for all channels as per technical specifications and other stipulations of tender document. It should be possible to lock all the equipments with only order wire telephone remaining outside the rack. Inspection: Consignee. SOR ITEM NO. 1437 | Numbers | 5.00 | 39,792 | 1,98,960 |
| 84 | 8 port L2 switch Supply and installation of Layer 2 Switch as per RDSO/SPN/TC/83/2020, Rev.2.0 or latest. Minimum 8+2 Port Manageable with 8 Nos. 10/100/1000 Mbps Ethernet port, POE+ & Single Fiber 2 Nos. 1G SFP Port with SM SFP Optical Modules loaded with all accessories etc. as per RDSO/SPN/TC/83/2020, Rev.2.0 or latest. Inspection: RDSO/Consignee. SOR ITEM NO. 1432 | Numbers | 40.00 | 54,640 | 21,85,600 |
| 85 | Supply of 24 - PORT GbE L2 PoE + L2 Managed Switch, With 4 Gigabit combo ports 802.3at, 375 Watt and as per annexure Inspection: Consignee | Numbers | 4.00 | 43,199.29 | 1,72,797.16 |
| 86 | Installation of Network Switch | Numbers | 38.00 | 644.92 | 24,506.96 |
| 87 | Supply of Dual Band Gigabit Wifi Access Point. as per Annexure Inspection: Consignee | Numbers | 45.00 | 9,600 | 4,32,000 |
| 88 | Installation of dual band Gigabit wi-fi acess point as per site requirement | Numbers | 45.00 | 699.57 | 31,480.65 |
| 89 | Supply, Installation, testing and commissining of online UPS 5 KVA with battery back up of minimum 4 hours with battery trolly of reputed make as APC/Unline etc or Similar. | Numbers | 5.00 | 2,72,649.46 | 13,63,247.3 |
| 90 | Supply of 1KVA Online UPS with min. 30 minute back up along with 03Nos. 12V/26Ah external battery (battery make : Exide/Quanta/similar) with terminal & all accessories set. Model: Liebert GXT MT+ CX/similar, Make: Vertive/APC/Numeric/Similar. Inspection: Consignee. | Numbers | 25.00 | 26,222 | 6,55,550 |
| 91 | Supply of Thermo shrink Jointing kit for Quad Cable (for straight joints) as per RDSO spec IRS/TC-77/2012 revision 3 With latest Amdt. | Numbers | 28.00 | 2,754 | 77,112 |
| 92 | Jointing of 4 / 6 quad /Signaling cable with Heat Shrinkable straight through Jointing Kit. All the material required for the work are to be arranged by contractor himself at his own cost except Thermo shrinkable Joint Kit/Rapid Joint kit. After jointing the cable through test such as insulation test, continuity cable losses etc. to be carried out jointly with Railway Engineer. If any defect or any damage is observed during jointing, the contactor has to redo the joint free of cost. Note: The jointing is to be housed in location box as per Technical Policy Circular No-107 | Numbers | 28.00 | 1,205 | 33,740 |
| 93 | SUPPLY OF BRIDGE CARD AS PER LATEST SPECIFICATION.THIS INCLUDES SUPPLY OF BRIDGE SHELF (12 CARDS PER SHELF) WITH ALL ACCESSORIES FOR HOUSING THE BRIDGE CARD. NOTE: IN CASE THECARD CONTAIN LESS THAN 8 CIRCUITS OR 6 CIRCUITS PER CARDAS MENTIONED ABOVE, THE EQUIVALENT NO. OF CARDS TOEQUAL THE REQUIREMENT OF 8 CIRCUITS OR 6 CIRCUITS PERCARD MUST BE OFFERED BY THE VENDOR. INSPECTION CONSIGNEE. | Numbers | 8.00 | 89,443 | 7,15,544 |
| 94 | 50 Pair cable of 0.5mm dia. polythene insulated, polythene sheathed, jelly filled underground telephone cable with poly aluminium moisture barrier, annealed copper conductor, polythene jacketed double steel tape armoured as per specification IRS:TO 41/97 Amdt.3 or latest. Inspection: RDSO/Consignee. SOR ITEM NO. 14137 | Metre | 1200.00 | 307 | 3,68,400 |
| 95 | Supply of Fiber Distribution Management system (FDMS)/LIU for 24 Fiber complete with all accessories such as patch cord & pigtail etc. as per TEC Spec. GR/FDM/01/02 April '2007 or latest. This includes supply of installation accessories as per technical specification. Inspection: RITES/Consignee. SOR ITEM NO. 1414 | Numbers | 6.00 | 3,636 | 21,816 |
| 96 | Jointing, terminating & splicing of 24/48 optical fiber cable and fixing of termination box/FDF/placing of joint closures in the pit required at various locations including transportation of all the jointing & terminating materials from railway store to the work site and returning leftover materials to the railway store. | Numbers | 67.00 | 13,505 | 9,04,835 |
| 97 | Supply of SFP Cu 1G 10/100/1000 Base T Copper Ethernet Transceiver SFP Module with all accessories. Inspection: RDSO/Consignee. SOR ITEM NO. 1435 | Numbers | 38.00 | 7,598 | 2,88,724 |
| 98 | Supply of RJ-45 Connector for CAT-6 cable. Inspection: Consignee.SOR ITEM NO. 1410 | Numbers | 950.00 | 8 | 7,600 |
| 99 | Supply of RJ-45 CAT-6 Patch cord 2M length. Inspection: RITES/Consignee. | Numbers | 150.00 | 241 | 36,150 |
| 100 | Supply PVC conduit pipe of 50 mm. dia. Inspection: consignee. SOR ITEM NO. 14149 | Metre | 7550.00 | 79 | 5,96,450 |
| 101 | Execution/fixing of PVC conduit pipe of 50 mm. dia. on wall/Shed including supply of all fixing materials & accessories by contractor. Returning the left over material to the railway store. SOR ITEM NO. 14150 | Metre | 7550.00 | 20 | 1,51,000 |
| 102 | Supply, transportation at site and Installation of RCC cable route marker engraved and painted on both side along the route at every 50 meter and at route diversion. The cable marker is to be fabricated as ER TECHNICAL POLICY CIRCULAR NO.108. Fixing work is to be done as per extant practice of E.Rly. and as per Railway site supervisor. 50% payment will be done after supply of material. Material to be supplied at Site. INSPECTION: Consignee. SOR ITEM NO. 1221 | Numbers | 1060.00 | 882 | 9,34,920 |
| 103 | Supply of electronic Cable route tracer/locator (with minimum 10W transmitter) with underground cable and pipe locating receiver and cable avoidance tool that provide location of armoured OFC, signalling and telecom, power cable etc. Make: Stanlay STLOC10 GPS Pathfinder/2273M-iD (12W)/RD 2273M-iD/3M 2573 or similar/superior. Item to be supplied after successful demonstration and Approval of Railway. Inspection: RITES. SOR ITEM NO. 1608 | Numbers | 2.00 | 5,21,636 | 10,43,272 |
| 104 | Supply of End plate 2.5 mm./0.091 in thick as per RDSO Spec. No. RDSO/SPN/189/2004 With latest amendments. Inspection: RDSO. SOR ITEM NO. 0426 | Numbers | 800.00 | 13 | 10,400 |
| 105 | Supply of End Stopper 10 mm./0.0394 in width as per RDSO Spec. No. RDSO/SPN/189/2004 With latest amendments. Inspection: RDSO. SOR ITEM NO. 0427 | Numbers | 730.00 | 13 | 9,490 |
| 106 | Supply of Carrier Rails for above 35 mm. x 7.5 mm., 1 mm./0.039 in thickness un-slotted type as per site requirement. Inspection: Consignee. SOR ITEM NO. 0428 | Metre | 730.00 | 128 | 93,440 |
| 107 | Supply of Markers strip as per RDSO Spec. No. RDSO/SPN/189/2004 with latest amendments. Inspection: RDSO. SOR ITEM NO. 0429 | Numbers | 400.00 | 20 | 8,000 |
| 108 | Supply of OFC SC/SC Patch Cord 5 m Length. Inspection: Consignee. SOR ITEM NO. 1406 | Numbers | 130.00 | 203 | 26,390 |
| 109 | Supply of SC-LC patch cord 5 m. Inspection: Consignee. SOR ITEM NO. 1407 | Numbers | 170.00 | 205 | 34,850 |
| 110 | Supply of SC-FC patch cord 5 m. Inspection: Consignee.SOR ITEM NO. 1408 | Numbers | 130.00 | 164 | 21,320 |
| 111 | Supply of LC-LC patch cord 5 m. Inspection: Consignee.SOR ITEM NO. 1409 | Numbers | 125.00 | 204 | 25,500 |
| 112 | Supply of Data / Failure Analysis System (FAS) with Fault Analysis Software (Datalogger Analyser) consisting of a PC as per following specifications. Intel i7, 10th generation or better, RAM - 16 GB, SSD - minimum 256 GB, HDD - 500 GB, display - 27 inch, Window-10 or higher, graphics Type - integrated, Keyboard & mouse- wireless. Inspection: RITES/Consignee. Make: HP/Lenovo/Dell or better. SOR ITEM NO. 1623 | Numbers | 4.00 | 96,538 | 3,86,152 |
| 113 | Supply of Light class GI pipes 100 mm. dia. (thickness 3.6 mm.) as per IS 1239 (Part-1):2004 or Latest with socket & coupling. Inspection: RITES/Consignee. SOR ITEM NO. 1201 | Metre | 400.00 | 1,326 | 5,30,400 |
| 114 | Manual Track crossing/ Road Crossing by Horizontal Boring method at culverts/track/pucca road. This also includes insertion of HDPE pipe of 110 mm./G.l. Pipe of 100 mm. in the bore drilled (HDPE pipe/GI pipe is to be supplied by Railway). SOR ITEM NO. 1219 | Metre | 1900.00 | 1,634 | 31,04,600 |
| 115 | Supply, installation commissioning of 500 watt Amplifier Make Ahuja model SSA 5000EM.or Similar. Inspection: Consignee. SOR ITEM NO. 14124 | Numbers | 20.00 | 29,075 | 5,81,500 |
| 116 | Supply of Microphone with all accessories, with a sturdy, aluminium die-cast top and special high reliability switches with integrated LED indicators, Fitted with a flexible 300mm (12") gooseneck and a high quality unidirectional dynamic cartridge. Make: Ahuja/Bosch/Studio Master. Model: ACM96 or similar. Inspection: Consignee. SOR ITEM NO. 14164 | Numbers | 18.00 | 3,599 | 64,782 |
| 117 | Dismantling, Shifting and installation of control and other telecom equipments like Rack, control phone, magneto phone, auto phone, VHF sets, VF Repeaters etc. from old station/ FOB to new station / FOB as per instructions of site engineer. All the material required for fixing and installation will be supplied by the contractor. Inspection: Consignee.SOR ITEM NO. 14152 | Station | 3.00 | 9,196 | 27,588 |
| 118 | "Supply of OFC Termination box as per TEC Spec No.TEC/GR/TX/FTB-02/02/APR-2010 with the latest amendment including all miscellaneous & consumable for fibre splicing. It should have the capacity to terminate 02 No. 24 OFC cable through separate entry holes & to take out & terminate 6 or 24 pigtails through separate exit holes. Make: JT Optics/Raychem/Aras Telecom/equivalent. INSPECTION : CONSIGNEE." | Numbers | 18.00 | 2,775.57 | 49,960.26 |
| 119 | Excavation of OFC pit for cable jointing of size 1.5m x 1.5m x 1.2m for all type of soils. The section. Back filling the pit and ramming after jointing. Provision of brick walling the four walls and bottom of pit with RCC slab, back filling with earth and ramming as per drawing. N.B. all the materials including cement required for the above will be supplied by the tenderer. | Numbers | 4.00 | 6,659.25 | 26,637 |
| 120 | "Testing of all fibres of the optic fibre cable, quad, PIJF cable, ADMS, mux and other accessories installed above and final commissioning of optic fibre communication link conforming to railway's specification including end to end testing for realisation of optic fibre system.Inspection: Consignee" | Station | 2.00 | 10,660.42 | 21,320.84 |
| 121 | Execution of the HDPE Pipe in the trench/ through platform cutting/wall clamping/ over ladder etc. as per site requirement. | Metre | 6000.00 | 18 | 1,08,000 |
| 122 | Supply Installation & Commissioning of Layer 2 Manageable, 24 Port POE, 24 GE10/100/1000 Base X Ethernet port with POE+ support and 4x1GE SFP Port for uplink with 4 no of 1GE SFP modules loaded, with all accessories as per RDSO/SPN/TC/83/2020, Rev.2.0 or latest. Inspection: RDSO/Consignee. | Numbers | 5.00 | 28,766 | 1,43,830 |
| 123 | Supply and installation of Input/Output Box for termination of CAT-6 Cable. Inspection: RITES/Consignee. SOR ITEM NO. 1443 | Numbers | 90.00 | 297 | 26,730 |
| 124 | Supply of OFC Joint Enclosure Box Type Loaded LIU Inspection : Consignee | Numbers | 90.00 | 9,677.98 | 8,71,018.2 |
| 125 | Fixing o f frame, surface b o x a n d white cover plates for Two modules. This also includes fixing of RJ-11 Telephone sockets with level holder Jack type, RJ-45 LAN sockets Jack Type (Tool less) and blanking plates for one modules. Make: Legrand or Similar. Inspection: Consignee | Numbers | 90.00 | 143 | 12,870 |
| 126 | Fixing of frame, surface box and white cover plates for Two modules. This also includes fixing of RJ-11 Telephone sockets with level holder Jack type, RJ-45 LAN sockets Jack Type (Tool less) and blanking plates for one modules. Make: Legrand or Similar. Inspection: Consignee. | Numbers | 94.00 | 144 | 13,536 |
| 127 | Supply & installation of Highper formance dual band access point.High performance dual band accesspoint. Wireless standards: 802.11ax/ac/n/g/b/a, Wireless Speed:1201Mbps, Ethernet:2*10/100/1000M Gigabit, Antenna:3dBi, Tx Power: 27dBm, Max powerconsumption: 16W, Make-Wisnetwork or similar, Model: WCAP- AX/similar. Inspection: Consignee. | Numbers | 4.00 | 28,530.18 | 1,14,120.72 |
| 128 | "Supply of IP Phones havingColor Display with Highresolution Graphics and aResolution Ratio: 2.4""320*240. Specification As perannexure-2 Approved Make:Grandstream, Panasonic, STL(Model NEOX) orsimilar.Inspection-Consignee. " | Numbers | 10.00 | 6,011.85 | 60,118.5 |
| 129 | Over head laying of 6-core OFC cable along with FOB/Wall/shed structure etc. including clamping/fixing the PVC conduit over wall ceiling/open space/terrace/existing fixtures etc. as per directives of Rly. Site engineer. | Metre | 1100.00 | 52.53 | 57,783 |
| 130 | Supply of Gigabit Ethernet Media Converter .Make: JTOptics/Digisol/TP Link/similar. Inspection: ConsigneeSupply of Gigabit Ethernet Media Converter .Make: JTOptics/Digisol/TP Link/similar. Inspection: Consignee | Pair | 4.00 | 5,204.4 | 20,817.6 |
| 131 | Supply of fire retardant Simplex FiberOptic Patch Cord LC - SC (up to 03mtr length), Connector Insertion loss,Max.0.3dB, Sheath material: PVC,Fiber type: Single Mode 9/125micron, Make: Dlink/Molex/Digisol/AMP/Syntimax /similar.Inspection: Consignee. | Numbers | 120.00 | 689.14 | 82,696.8 |
| 132 | Supply of I/O port withback box, connector andface plate . Specification: asper annexure-16,Inspection-Consignee. Approved Make:Molex, Commscope, R&M orsimilar. Inspection : Consignee | Numbers | 7.00 | 2,275.25 | 15,926.75 |
| 133 | Supply of Ethernet to El Converter (Ethernet port to G.703) with four Ethernet ports to one El. The converter shall have the provision of dual AC I DC power supply. Inspection: RITES/Consignee. | Pair | 8.00 | 47,597 | 3,80,776 |
| 134 | Releasing of existing apparatus cases (Full/ Half/ Quarter size) without damage after releasing the shelf planks, Terminal blocks, Fuse Blocks, Terminal Boards, Relays of all types EKTs, Secondary Cells, power equipments, 'E' type locks, etc., and breaking the concrete foundation. After releasing, the resultant pits are to be closed and consolidated by ramming and levelling. The released materials shall be accounted for and stacked at a place as instructed by the Railway representative at site. SOR ITEM NO. 2003 | Numbers | 4.00 | 2,254 | 9,016 |
| 135 | Supply of Office Chair make Godrej CH-7B or better of reputed brand. Inspection: Consignee. SOR ITEM NO. 1007 | Numbers | 7.00 | 3,658 | 25,606 |
| 136 | Supply of Office Revolving Chair Godrej Make Model No.9u02r Bravo or Better of reputed brand. Inspection: Consignee. SOR ITEM NO. 1008 | Numbers | 5.00 | 11,386 | 56,930 |
| 137 | Supply of Office table with laminated top with three drawers on left hand side and one locker on the right hand side. Olive brown with duplicate keys. Make: Godrej Model T-9 (136.5 cm. X 68 cm. X 75 cm.) or Superior of reputed brand. Inspection: Consignee. SOR ITEM NO. 1009 | Numbers | 7.00 | 16,244 | 1,13,708 |
| 138 | Supply of Steel Plain Almirah with 4 adjustable slaves. Size: 1980 mm. height, 915 mm. width and 485 mm. depth. Make: Godrej Storewel Plain Large or Better of reputed brand. Inspection: Consignee. SOR ITEM NO. 1010 | Numbers | 7.00 | 21,636 | 1,51,452 |
| 139 | Supply of 2 Aspect weather proof rain protection covers made with polyolefin polytylene sheet Avg.Random thickness up to 200 microns and the sheet processed with CX slurry polymerization to meet good rigidity, less draw- down and malleability, stress crack sistance and suitable to fix at rear side of the 2 Aspect IRS Type CLS unit duly provided with prestitched gripping elastic on the cover along with suitable lacing rope to bind the cover over the base. Retro reflective white band of 3inch width will be provided as cross mark to be made available on the cover. Size: 120cm length x45cm Width x23cm Top | Numbers | 10.00 | 239 | 2,390 |
| 140 | Supply of 3 Aspect Weather Proof Rain Protection Covers made with polyolefin Polytylene sheet Avg.Random thickness up to 200microns and the sheet processed with CX slurry polymerization to meet Good rigidity, less drawdown and alleability, Stress Crack Resistance and suitable to fix at Rear side of the 3Aspect IRS type CLS unit duly provided with prestitched gripping elastic on the edge of the cover along with suitable lacing rope to bind the cover over the base. size 150cmx45cmx23cm. Retroreflective white band (3inch width) cross mark to be made available on cover. | Numbers | 10.00 | 257 | 2,570 |
| 141 | Supply of 4 Aspect Rain Protection covers made with Polyolefin Polyethylene sheet Avg.Random thickness upto 200microns of and the sheet processed with CX slurry olymerization to meet Good Rigidity, Less draw-down and malleability, Stress Crack Resisitance and suitable to fix at Rear side of the 4Aspect, IRS type CLS Unit duly provided with prestitched gripping elastic on the edge of the cover along with suitable lacing Belt to bind the cover over the base. Retro reflective band of 3inch width will be provided as cross Mark at Rear Side of the cover. Size: 200cmlengthx45cm widthx23cm Top | Numbers | 10.00 | 268 | 2,680 |
| 142 | Provision of one skilled and 2 unskilled staff round the clock to attend to teething trouble of the installation along with SI/CSI after the installation has been brought into commissioning. The work includes routine maintenance, failure restoration as per the direction of the SI/CSI. SOR ITEM NO. 1905 | Per Month | 9.00 | 64,340 | 5,79,060 |
| 143 | Arranging of HDD machine with accessories including handling/laying of Pipes and preparation of site and boring (boring size upto 175 mm.) at track crossing/ pucca road crossing, boring trench shall be minimum 01(one) meter below the track/road/pucca road crossing area. Required pipes shall be supplied by Railways. Payment shall be made after laying of required cables & sealing/plugging of vacant pipes. Note: This shall be used only for track crossing/pucca road crossing. SOR ITEM NO. 1216 | Metre | 4500.00 | 1,946 | 87,57,000 |
| 144 | Supply of HDPE pipe of various diameter with material grade PE 100 as per specification IS:4984:1995 up to latest amendment. INSPECTION: RITES/Consignee. d) HDPE pipe of 160mm Dia. | Metre | 4500.00 | 792 | 35,64,000 |
| 145 | Supply of FRP type color light signal unit 4 aspect complete as per Drg. No. SA 23001/NM with Latest amendments and as per RDSO Spec. no. RDSO/SPN/194/2006 Rev.2.0 or latest. Inspection: RITES/Consignee. SOR ITEM NO. 0821 | Numbers | 2.00 | 39,446 | 78,892 |
| 146 | Supply of color light signal post 5.5 mtr. as per RDSO SPEC. NO. IRS:S-6-81 (or latest) and Drg. No. SA-23156 (ADV), Alt-1 or latest. Materials to be procured only from RDSO approved list of firms for manufacture & supply of mechanical signaling items. Inspection: RITES/Consignee. | Numbers | 2.00 | 13,879 | 27,758 |
| 147 | Supply of 5.5 meter Ladder for Color Light Signal as per RDSO Drawing No. SA-23156 (Adv.) or latest and Stage with Ladder as per Drawing No. S-2033/M (IRS) or latest & as per Specification No. IRS:S-10/78 & IS:210 or latest. Inspection: RITES/Consignee. | Numbers | 2.00 | 12,144 | 24,288 |
| 148 | Supply of cast iron offset bracket for Main Signal with U clamps, nuts, washers complete Drg. No. SA- 23080/ADV/Alt-1. RDSO Spec. No. IRS-S-10/78. Inspection: RITES/Consignee. | Numbers | 2.00 | 3,168 | 6,336 |
| 149 | Supply of 140 mm diameter Cast Iron (Grade-20) Signal base as per Drawing No. S-2011/M and as per Specification No. IRS:S-10/78 & IS:210 or latest. Inspection: RITES/Consignee. | Numbers | 2.00 | 6,320 | 12,640 |
| 150 | Casting, concreting & curing of foundation for Main signal including cost of all materials required for casting and concreting. All materials required for execution will be supplied by the contractor including cement, sand & stone chips, Foundation Bolts, PVC Pipe, shuttering etc. as per Drg. No. S&T/C-42(NKG). | Numbers | 2.00 | 10,166 | 20,332 |
| 151 | Erection of surface base, signal post, mounting of Color Light Signal up to 4 aspects complete on signal post, offset bracket, LED fixing, plumbing of the signal through sealing gap between Surface base and signal post, fixing of ladder with platform complete and concreting of ladder shoe, fixing of number plates, marker board, termination tail cables, wiring of signal unit, fixing of EWS locks, and painting of one coat of red oxide and two coats of aluminium/enamel paints , black paint on post, ladder, Platform, ladder shoe as per practice. When the aspect is fixed on an offset bracket using 'U' bolts and nuts, a through bolt shall be provided by drilling a hole in the signal pole to prevent the offset bracket from sliding down. Painting of Signal unit with two coats of white inside and Black outside (Supply of surface base, offset bracket, CLS pole, CLS aspects complete, ladder with shoes and platform, LED aspects, and wire coils will be supplied by Railways). (through bolts and nuts, cement, stone jelly 20/25mm dia. river sand, Signal Color Rings, all fixing bolts and nuts, teak wood, paints PVC/Nylon sleeves and all other miscellaneous materials for the work shall be supplied by the contractor) | Numbers | 2.00 | 13,314 | 26,628 |
| 152 | Supply and fixing of protective screen of expanded metal 12 SWG of size 1200 x 1500 mm. on signals as per std. practice in the RE Area. Inspection: Consignee. | Numbers | 2.00 | 4,415 | 8,830 |
| 153 | Supply, Fabrication of Retro reflective Nomenclature Board of size 254 mm. x 358 mm. made of 2 mm. thick aluminium sheet & high intensity prismatic (hip) grade retro reflective sheet (TYPE-IV) including fixing arrangement for fixing them on existing post per SEM and as per standard practice. Details of station, signal type and number to be obtained before supply. Inspection: Consignee. | Numbers | 3.00 | 470 | 1,410 |
| 154 | Supply of 280 mm. x102 mm. x 2 mm. thickness vitreous enamel coating arrow markers board fabricated with MS clamp of size 40 mm. x 6 mm. along with suitable bolts and nuts. Inspection: Consignee. | Numbers | 3.00 | 367 | 1,101 |
| 155 | Supply of LED signal lamps for Main color light Signal RED Aspect, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Spec. No. RDSO/SPN/199/2025 Revision.1.2 with Amendment - 1 or latest. Inspection: RDSO. | Numbers | 2.00 | 9,238 | 18,476 |
| 156 | Supply of LED signal lamps for Main color light Signal YELLOW Aspect, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Spec. No. RDSO/SPN/199/2025 Revision.1.2 with Amendment - 1 or latest. Inspection: RDSO. | Numbers | 3.00 | 9,454 | 28,362 |
| 157 | Supply of LED signal lamps for Main color light Signal GREEN Aspect, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Spec. RDSO/SPN/199/2025 Revision.1.2 with Amendment - 1 or latest. Inspection: RDSO. | Numbers | 2.00 | 10,414 | 20,828 |
| 158 | Painting of existing color light Signals as per standard practice. The work involves scraping of old paint and two coats of aluminium enamel paint on the Signals & White paint inside signal unit and X mark on signal unit backside with white paint, Painting of Signal Unit, ladder, platform etc. complete as instructed by Railway representative at site (Paint and all other miscellaneous materials required for the work shall be supplied by the Contractor). | Numbers | 2.00 | 1,831 | 3,662 |
| 159 | Provision of SCREEN on signals when they fall within 2 meters from the live conductor by expanding metal (size 20 mm. x 60 mm. strand 3.25 mm. wide and 1.6 mm. thick) as per the instruction of the site engineer in charge. This includes supply of all materials including connection with earth electrode. Provision of SCREEN on signals when they fall within 2 meters from the live conductor by expanding metal (size 20 mm. x 60 mm. strand 3.25 mm. wide and 1.6 mm. thick) as per the instruction of the site engineer in charge. This includes supply of all materials including connection with earth electrode. Inspection: Consignee. | Numbers | 2.00 | 4,155 | 8,310 |
| 160 | Supply and fixing of cross bar on signal (signal not in use) made of hard wood of size 1000 mm. x 100 mm. x 20 mm. The cross bar shall be painted white as per Signal Engineering Manual. All material required for installation shall be supplied by the contractor. Inspection- Consignee. | Numbers | 2.00 | 482 | 964 |
| 161 | Supply of Pipe lock with key ring size inside dia. 40.5 mm., outside dia. 60mm. Thickness 20 mm., lock length 65 mm. Inspection: Consignee. | Numbers | 2.00 | 162 | 324 |
| 162 | Supply and fixing of wire mesh for the following signals, duly painted with black enamel in two coats. Inspection: Consignee. a) Color Light Signals each LED | Numbers | 5.00 | 102 | 510 |
| 163 | Releasing of existing tail cables and drawl of new tail cables for color light signals up to four aspects with or without route indicator, post type shunt signal and calling on signals. Termination of new tail cables and wiring. This work includes drawl of new tail cables into the signal post duly releasing the existing tail cables from the relevant signals. SOR ITEM NO. 0856 | Numbers | 2.00 | 3,864 | 7,728 |
| 164 | Dismantling and releasing of existing Color light Signals complete (up to 4 aspects) with or without Route Indicators, calling on signals, shunt signals etc., carefully without any damage to the gadgets, accounting and stacking them neatly at a place as instructed by Railway representative at site. The work includes breaking the concrete foundation, closing the resultant pit and resurfacing it by ramming and levelling. SOR ITEM NO. 2011 | Numbers | 2.00 | 2,311 | 4,622 |
| 165 | Dismantling of existing Signal Foundation (upto ground level by hydraulic breaker). SOR ITEM NO. 0858 | Numbers | 2.00 | 2,788 | 5,576 |
| 166 | Removal of existing CLS units, fixing of new CLS units with LED aspects, up to four aspects, directly or using off set brackets duly drilling holes on the signal poles, provision of EWS locks wherever necessary, termination of tail cables, wiring and painting of aspect. The new tail cables shall be taken through the signal poles and the unwanted cables duly released. [EWS locks, paints and all other miscellaneous materials shall be supplied by the Contractor]. SOR ITEM NO. 0864 | Numbers | 2.00 | 8,321 | 16,642 |
| 167 | Supply of LED signals for Route Aspect (Subsidiary Signal), 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Spec. No. RDSO/SPN/153/2023 Revision.5.0 or latest. Inspection: RDSO. | Numbers | 10.00 | 5,864 | 58,640 |
| 168 | Supply of 1 WAY FRP TYPE JUNCTION ROUTE INDICATOR as per RDSO Drg. No. SA-23401(Adv.)/ (Alt.2). Inspection: RITES/Consignee. SOR ITEM NO. 0832 | Numbers | 2.00 | 33,597 | 67,194 |
| 169 | Fixing of junction type route indicator - 1 way - complete / fixing of additional limb to the existing route indicators, termination of tail cables, wiring, fixing of required number of EWS locks, wire mesh and painting. [Fixing bolts and nuts, wire mesh, PVC / Nylon sleeves, paints and all other miscellaneous materials shall be supplied by the contractor]. SOR ITEM NO. 0835 | Numbers | 2.00 | 2,136 | 4,272 |
| 170 | Supply of offset bracket for position light shunt signal (90 mm. outside Dia.) post with U clamps, nuts, washers complete as per RDSO Drg. No. SA-23080/ADV/ALT-1 all drawings should be as per latest. Inspection: RITES/Consignee. SOR ITEM NO. 0845 | Numbers | 3.00 | 2,573 | 7,719 |
| 171 | Releasing of existing Route Indicators of different types including tail cables, carefully without causing any damage, accounting and stacking them neatly at a place as instructed by Railway representative at site. SOR ITEM NO. 2012 | Numbers | 2.00 | 1,156 | 2,312 |
| 172 | Q-Series Track Relay (QTA2 Type), AC immunized, 9 Ohms, 2F/1B along with plug board (base plate), connectors, retaining clips etc. and conforming to BRS:939A & 966(Appendix F2) and RDSO Spec No. IRS:S@45"44@ S-23 with Amdt. Upto date as applicable or latest. Inspection: RDSO. | Numbers | 6.00 | 4,777 | 28,662 |
| 173 | Contactor Unit (QBCA1 Type), 24 V DC, 2F(HD)/4B complete with plug board (base plate), connectors, retaining clips etc. and conforming to BRS-943 and RDSO Spec. No. IRS:S-34 & S-23 with Amdt. upto date as applicable or latest. Inspection: RDSO. | Numbers | 6.00 | 8,464 | 50,784 |
| 174 | Supply of Track feed Battery Charger as per RDSO Spec. No. IRS: S-89/2013 Ver.1.0 or latest. Charging Capacity Rating 10 Amps for Charging 80 AH Battery. Inspection: RDSO. | Numbers | 6.00 | 5,725 | 34,350 |
| 175 | Supply of Adjustable Track Feed Resistance 30 Ohms (Disc Type) as per RDSO Drg. No. SA-20161-66/M or latest. To be procured from RDSO Approved sources. Inspection: RDSO. | Numbers | 6.00 | 200 | 1,200 |
| 176 | Installation wiring, testing and commissioning of DC track circuit as per approved track circuiting plan. The work includes fixing of track bonding (double) with 8 SWG soft GI wire, rail connector with GI wire and fixing with bond pin with galvanised iron wire, track jumpers (double) with signalling cable. It also includes installation and wiring of track feed chargers, track relays, track circuit equipment's in the location box, including drilling of 9/32" hole on rails where required. Erection, fitting of Track Lead Junction Box on two supports. The work shall be done as per instructions of Rly engineer at site. GI wire, bond pin, TLJB, Track relay, Track resistance, Track feed charger, Choke, wire coil, fuses, terminal, signaling cable will be supplied by Railways. | Per Track Circuit | 6.00 | 4,090 | 24,540 |
| 177 | Supply of Track Lead Junction Box (TLJB) made from FRP material including brass bolts and hylam board sheet with 4 terminals as per ER drawing no- SI/TYP/0096 & ER Technical circular policy no-118 (Modified). Inspection: RITES/CONSIGNEE. The technical specifications are as follows: (a) TLJB complete with cover to be in black/red having approximate weight of 4.0 Kg. with L-262 mm. W- 212 mm. and H-90 mm. and all the holes required for mounting on FRP stump (vertical two for each FRP angle) HDPE pipe , cable etc. (b) Each TLJB shall have two bakelite terminal block fitted horizontally: each bakelite terminal block shall have two nickel chrome plate M10 brass terminal, 50 mm. long. Along with each TLJB, nickel chrome plated brass links (two nos. of adequate strength for vertical linking of the terminals to be supplied. (c) HDPE pipe of size 32/35 mm., 380 mm. long, along with two nuts for fixing on the TLJB hole . (d) The FRP stump for mounting the TLJB to be made of one meter long 30 mm. X 30 mm. X 4 mm. angle (2 nos.) and 300 mm. long 30 mm. X 30 mm. X 4 mm. angle (1 no.) fixed at 50 mm. from the bottom using galvanised nuts and bolts. The TLJB and the angles for stump should come along with holes on them for fixing using galvanised nuts and bolts of adequate strength to be supplied along with TLJB. Inspection: RITES/Consignee. | Numbers | 12.00 | 4,507 | 54,084 |
| 178 | Supply of B Type Choke as per RDSO Spec. No. IRS:S- 65/83 (Amnd.1) or latest. Inspection: RDSO. | Numbers | 6.00 | 6,026 | 36,156 |
| 179 | Supply of Channel Pins MS (Galvanized) single groove, 7 mm. suitable for 4 mm. dia. bonding wire as per Spec. No. IRS S-17 & RDSO Drg. No. S-69/M. Inspection: Consignee. | Numbers | 180.00 | 5 | 900 |
| 180 | Supply of GI wire 8 SWG (4 mm. dia.) suitable for track circuit rail bonding. Inspection: Consignee. | Metre | 180.00 | 8 | 1,440 |
| 181 | Provision/Installation of bonding with GI wire 4 mm. dia. (8 SWG)/wire rope for track jumper & fish plate joints bonds. This will include drilling of 7.0/7.1/7.2 mm. dia. holes in rails (4 Nos.) and provision of two jumpers for each bond, clipping of bonds etc. with contractors own tools as per instruction of Rly. Engineer at site. Note- This item is already covered in above item no 0710 however; this item should be used for isolation/maintenance purpose only. | Numbers | 12.00 | 205 | 2,460 |
| 182 | "SUPPLY OF POLYMER POSITIVE TEMPERATURE COEFFICIENT DEVICE (PPTC) Resettable Fuses, for outdoor circuits. 30V/2.5A for track feed and 60V/1.1A in place of 24V/2A fuse and 120V/1.1A for signal lighting. Make- RAYCHEM, BOURNS, LITTLE FUSE, FUZETEC or TYCO. Quantity as per site engineer. Note- PPTC fuses are to be connected with crimped ring type lugs. ". Inspection: RITES/Consignee. | Numbers | 12.00 | 100 | 1,200 |
| 183 | Supply of Class C, Type 2 Protection for 60-100V AC/DC/24-60V. Supply as per Clause No.3.11.2 of Specification No. RDSO/SPN/165/2023 Ver.4.0 or latest. The Class C shall be with pluggable type, with indication and potential free contact. The supplier should submit an OEM certificate, KEMA, UL Certificate with the material, for connection between L1-L2, L1-E & L2-E. Inspection: RDSO/Consignee. | Numbers | 12.00 | 885 | 10,620 |
| 184 | Supply of 2V/80AH uncharged Low Maintenance Lead Acid (LMLA) secondary cell, shelf mounting type conforming to RDSO Spec. No. IRS:S-88/2004 or latest with inter cell connectors, nuts and bolts etc. Inspection: RDSO. | Numbers | 18.00 | 4,384 | 78,912 |
| 185 | Charging of 2V/80AH lead acid cell (Secondary cell) of various capacities as per Manufacturer's/Railway engineer's instruction. Acid and distilled water to be supplied by the contractor. Specific gravity acid should be approved type duly inspected by consignee. This includes installation and commissioning of the battery in circuit. Battery to be kept on a wooden rack. | Numbers | 18.00 | 462 | 8,316 |
| 186 | Fixing of Cable ClampAssembly with Sleeper alongwith placing of HDPE Pipe andfixing of Jumper ( Track,MSDAC etc.). This workincludes Preparation of jumper,placing through HDPE pipe,proper termination of jumperin TLJB and rail along withrequired drilling in rail. Note:-(i) No. in the Unit columnindicates per Sleeper ) (ii) Twoor three Clamps in eachsleeper. (iii) Jumper cable willbe supplied by railway. | Numbers | 12.00 | 1,373.29 | 16,479.48 |
| 187 | Releasing of existing TLJB and its accessories. SOR ITEM NO. 0712 | Numbers | 12.00 | 943 | 11,316 |
| 188 | Supply of Copper bonded steel electrode of 3.0 m. long, 17.2 mm. dia. with copper bonding thickness of minimum macrons and UL listed as per RDSO Spec. No RDSO/SPN/197 Ver.1.0 or latest and conforming to RDSO Drg. No. SDO/RDSO/E&B/001 or Latest. Necessary testing certificate of UL, IEC to be produced. Inspection: RDSO/Consignee. | Numbers | 50.00 | 4,858 | 2,42,900 |
| 189 | Supply of Copper Strip 25 X 6 mm. Inspection: RDSO/Consignee. | Metre | 1000.00 | 873 | 8,73,000 |
| 190 | Supply of Copper tape for BRC(25 X 2) mm. Inspection: RDSO/Consignee. | Metre | 1010.00 | 317 | 3,20,170 |
| 191 | Supply of Earth Enhancement material for treatment of earth pits as per Specification No. RDSO/SPN/197/2016 Ver.1.0 or latest. Inspection: RDSO/Consignee. | Kg | 100.00 | 147 | 14,700 |
| 192 | Supply of 50 mm. x 6 mm. GI tape for interconnecting earth electrodes. Inspection: Consignee. Inspection: RDSO/Consignee. | Numbers | 1000.00 | 541 | 5,41,000 |
| 193 | Installation of GI Tape (50 X 6 mm.) for connecting Main earth pit to other earth pit in case of loop earth. Note: 'No' in the unit column indicates 'per pair of earth pit'. | Numbers | 1000.00 | 100 | 1,00,000 |
| 194 | Supply and Execution of Exothermic Welds for more than 16 sq. mm. wire. This includes a Welding Kit, Welding Powder, Mould and other necessary materials. Note - No. in unit column indicates per welding. Inspection: RDSO/Consignee. | Numbers | 100.00 | 498 | 49,800 |
| 195 | Supply and Execution of Exothermic Welds for upto 16 sq.mm. wire. This includes a Welding Kit, Welding Powder, Mould and other necessary materials. Note- No. in the unit column indicates per welding. Inspection: RDSO/Consignee. | Numbers | 100.00 | 382 | 38,200 |
| 196 | Installation of MEEB/SEEB/BRC with the insulators (As per the instruction of Site Engineer). Fitting materials & Insulator (Dough Moulding Compound Conical type of different Size) as per the site requirement to be supplied by the contractor. Note: 'No' in the unit column indicates 'per insulator'. | Numbers | 100.00 | 32 | 3,200 |
| 197 | Supply of Nut Bolts, Washer (Stainless Steel) as per the site requirement (One set consists of 1 Nut, 1Bolt, 2 washer & 2 spring washer) Note: Hex Nuts, bolts and washers of size 5/16". Inspection: Consignee. | Set | 75.00 | 27 | 2,025 |
| 198 | Supply and laying of split DWC pipe of 120/103 mm. diameter in already dug cable trenches as per Drawing No.SK.9/11. The unit of RMT means two split pipes of 1 Mtr. each. Inspection: RITES/Consignee. SOR ITEM NO. 1213 | RM | 1000.00 | 230 | 2,30,000 |
| 199 | Providing brick masonry in ratio 1:6 cement and mortar including plastering with 1:4 cement and sand mixture both sides, 20 mm. thick each with contractor's owned class II bricks, including curing, grouting, bolting etc. wherever required. Bricks, sand and cement to be supplied by the contractor. SOR ITEM NO. 1234. Here the unit JOB = Per Cu. Mtr. | Job | 51.00 | 2,341 | 1,19,391 |
| 200 | Design of Cable Route Plan (Distant to Distant) including details of all track crossing/Horizontal boring/Cable Loop/ Cable Joints etc. in AUTOCAD & submission of colored paper copies for approval. After approval, Auto Cad copies to be submitted in USB pen drive along with approved copy in Tracing film and six copies of final approved drawing in plastic cover (Ammonia Print or print as approved by Railway) in properly bound booklet along with its scanned copy. Inspection: Consignee. Stations up to 4 lines. SOR ITEM NO. 1709-A | Set | 2.00 | 6,594 | 13,188 |
| 201 | Design of Location Box Drawings in AUTOCAD (Including Contact Analysis, Fuse Particulars, cable particulars etc.) and submission of Three paper copies for approval in A4/A3 white papers. After approval, AUTOCAD copies to be submitted in USB pen drive along with approved copy in Tracing film and six copies in Ammonia print of final approved drawing in plastic cover in properly bound booklet along with its scanned copy. Inspection: Consignee. SOR ITEM NO. 1712. Here the unit JOB = Per Location Box | Job | 20.00 | 579 | 11,580 |
| 202 | Carrying out wiring of potential free contact of SPD with Datalogger via Tag Block and validation in Datalogger. These work includes the releasing of existing unused wires and wiring the relays using 16/0.2 mm. copper wire as per RDSO Spec. Wire to be procured from RDSO's approved source Inspection: Consignee. Note: (i) wire to be procured from RDSO's approved source only. All required material like wire, soldering material, paint etc. to be supplied by the contractor for execution of the work. (ii)'No' in the unit column indicates 'Per SPD'. SOR ITEM NO. 1325 | Per Relay | 100.00 | 270 | 27,000 |
| 203 | Removal of Rail (13 mtrs.) in the way of cable route. In case of panel (39 Mtrs. Each) will be considered as three rails for payment purposes. SOR ITEM NO. 1222 | Numbers | 300.00 | 117 | 35,100 |
| 204 | Removal of PSC Sleeper in the way of cable route. SOR ITEM NO. 1223 | Numbers | 400.00 | 117 | 46,800 |
| 205 | Location survey for cable route and preparation of tentative cable route plan as per the instructions of Engineer in charge. SOR ITEM NO. 1239 | Kilometre | 8.00 | 1,458 | 11,664 |
| 206 | Supply of 12 core Armoured Mono mode OFC cable as per latest TEC Specification or latest. Inspection: RITES/Consignee. SOR ITEM NO. 1404 | Kilometre | 2.00 | 33,018 | 66,036 |
| 207 | Supply and installation of ONVIF 4MP IR bullet camera with Veri focal Lenses similar to Model No. DH- IPCHFW2231 RP-ZS-1RE6 and compatible to work with Dahua/Hiki vision/CP Plus/ Honeywell make NVR with required licensed video management software. Inspection: RDSO/Consignee. SOR ITEM NO. 1464 | Numbers | 10.00 | 19,517 | 1,95,170 |
| 208 | Supply of LED based Single faced Monocolor (MLDB) Three Line Train Arrival/Departure display board & all accessories as per RDSO Spec. No. RDSO/SPN/TC/108/2019, Ver.1.0 or latest. Inspection: RDSO/Consignee. SOR ITEM NO. 14107 | Numbers | 6.00 | 2,97,826 | 17,86,956 |
| 209 | Installation, testing and commissioning of LED based Single faced Monocolor (MLDB) Three Line Train Arrival/Departure display board as per RDSO Spec. No. RDSO/SPN/TC/108/2019, Ver.1.0 or latest. This also includes supply of all other materials required for installation such as clamp, hanger, angles etc. SOR ITEM NO. 14108 | Numbers | 6.00 | 13,586 | 81,516 |
| 210 | Providing the services of Computer oriented Technical manpower to carryout works like drawing, computation, write up etc., between 08:00 Hrs. to 20:00 Hrs. of the day with all expenses of transportation, accommodation, food, consumables etc., with all ascents, descents, taxes, octorio, cess, fees, duties with contractors cost etc., as per special conditions/specifications/ regulations and as directed by engineer in charge.SOR ITEM NO. 1902. | Man-Days | 730.00 | 777 | 5,67,210 |
| 211 | Supply of 24 fiber optical fiber cable straight joint enclosure (SJC) complete with all accessories along with enclosures with heat shrinkable splice protection sleeve as per RDSO Spec. RDSO/SPN/TC68/2014 Revision 1.0, Amdt.1.0 or latest. Splice losses in no case should be more than 0.1 dB. Inspection: RITES/Consignee. SOR ITEM NO. 1420 | Numbers | 22.00 | 5,505.45 | 1,21,119.9 |
| 212 | Supply of 5 way AC Power Socket Complete as per Annexure INSPECTION CONSIGNEE.. | Numbers | 6.00 | 1,277.35 | 7,664.1 |
| 213 | Supply of Network Cable Tester Similar to Fluke Networks - MS2-100 - MICROSCANNER2 cable verifier [Detailed Specification in Technical Document]. Inspection: Consignee. SOR ITEM NO. 1640 | Numbers | 1.00 | 34,467 | 34,467 |
| 214 | Supply of dependent/position light type Shunt Signal complete as per Drawing No. SA-23840(Adv.) Alt.2 or latest, S-23023 or latest with offset bracket to Drg. No. SA23080 Adv. Alt. 1 or latest to suit 140 mm. dia. post complete as per Specification No. IRS:S-10/78 Rev.8 or latest. Inspection: RITES/Consignee. | Numbers | 1.00 | 6,988 | 6,988 |
| 215 | Installation of LIU/FDMS and termination as per site condition. | Numbers | 2.00 | 13,142 | 26,284 |
| 216 | S u p p l y of Wireless AC1200 MU-MIMO Wi-Fi Gigabit Router, Dual- band Wireless AC1200 (867 Mbps on 5 GHz + 300 Mbps on 2.4 GHz), Wireless AC1200 MU MIMO Wi- Fi Gigabit Router, Gigabit WAN and 4 xGigabit LAN, Antenna Type: External Fixed antenna (2x2+2x2), make:Dlink/similar, Model: DIR 842/similar. Inspection: Consignee. | Numbers | 2.00 | 5,366.4 | 10,732.8 |
| 217 | "Supply, installation and commissioning of dual band Gigabit Wifi 6 Router as per tech Spec in Annexure A Make-TPLink/ Netgear or similar. Inspection : Consignee | Numbers | 4.00 | 11,062.5 | 44,250 |
| 218 | Supply of 4 port router as per RDSO Specification : RDSO/SPN/TC/84/2008, Rev.0 With accessories as : 2 on board GE, 4 port serial WAN interface card, 2E HWIC slots, 1 ISM slot, 256 Mb CF default, 512 Mb RAM, IP base, 2 Nos. V35 cable, DTE make to smart serial 10 feet length with required cable & connection. Make: CISCO or similar. Model: C8200L-1N-4T or similar. Inspection: RDSO/Consignee. | Pair | 2.00 | 1,12,454 | 2,24,908 |
| 219 | Supply of 4 port router as per RDSO Specification : RDSO/SPN/TC/84/2008, Rev.0 With accessories as : 2 on board GE, 4 port serial WAN interface card, 2E HWIC slots, 1 ISM slot, 256 Mb CF default, 512 Mb RAM, IP base, 2 Nos. V35 cable, DTE make to smart serial 10 feet length with required cable & connection. Make: CISCO or similar. Model: C8200L-1N-4T or similar. Inspection: RDSO/Consignee. | Numbers | 500.00 | 8 | 4,000 |
| 220 | Installation & commissioning of datacom equipments per location as per instruction of site engineer | Job | 1.00 | 5,137.15 | 5,137.15 |
| 221 | Push button corded auto telephone with Caller ID facility of Beetel, Panasonic or Binatone make. Inspection: Consignee. SOR ITEM NO. 1492 | Numbers | 12.00 | 2,642 | 31,704 |
| 222 | Supply and fixing of different sizes of PVC casing /Pipes as required by Railway at site by fixing/clamping to the wall for indoor wiring purposes. All the material required for fixing PVC casing/Pipes are to be supplied by the contractor. Inspection: Consignee. | Metre | 350.00 | 49 | 17,150 |
| 223 | Supply of Digital Clock suitable for Office Complex with GPS Synchronization in standalone mode as per Clause 6 of RDSO SPN TC 62/2008, (Rev.3.0) Amdt.2 or latest. Inspection: RDSO/Consignee. | Numbers | 4.00 | 13,342 | 53,368 |
| 224 | Supply & installation of G.I. Perforated Type Cable Tray with allaccessoreis like Tees, elbow, reducers, couplers etc. Cable TraySheet Thickness: 2.5mm, Cable Tray Width : 300mm, CableTray Height (mm): 50 Inspection: Consignee | Metre | 25.00 | 657.51 | 16,437.75 |
| 225 | Supply of Passthrough Crimping tool, Modular Plugs 8P8C RJ-45, 6P6C RJ-12 and 4P4C RJ-11, 7.5 inch steel construction body, All- steel handles (with padding), Suitable for 22-26 AWG wires, Built-in cable stripper with stop to ensure correct strip length continuity tester. Inspection:Consignee | Numbers | 2.00 | 734.93 | 1,469.86 |
| 226 | Supply of Power Distribution Unit 6AMP - 4, 1.5 Metre cable with Extension, made of MS-CRCA material, No. of 6 Amp Switches:4, No. of Sockets - 5 Pin 6 Amp:4, ISI Marked switch, Conformity of Switches to IS:3854/1997. Make: Netrack/Panduit/Schneider or similar Inspection: Consignee. | Numbers | 2.00 | 1,134.57 | 2,269.14 |
| 227 | Supply of Floor mounting surge suppressor (4 Nos. of 16A Socket in each strip), Make: Rockware or similar. Inspection: Consignee. Inspection: Consignee. | Numbers | 2.00 | 7,581 | 15,162 |
| 228 | Supply of Floor mounting surge suppressor (4 Nos. of 16A Socket in each strip), Make: Rockware or similar. Inspection: Consignee. Inspection: Consignee. | Numbers | 2.00 | 13,889 | 27,778 |
| 229 | Dismantaling & Release of all old cable(data/LS & power cable both) & old Horn as perinstruction of site engineer &transporting of the same to store. | Metre | 300.00 | 5.39 | 1,617 |
| 230 | Segregation, stacking, loading, unloading and transportation in a 6 MT capacity vehicle from Store to Scrap Depot or Store to Store within a city as per instruction of Engineer In charge. Here the unit JOB = Per Load | Job | 1.00 | 10,169 | 10,169 |
| 231 | Supply of Single Face RGB True Colour Mini Video Display (MVD) Size Pixel Resolution (W x H) 320 x 192. [Inspection by RITES.OEM certificate for support of spares/repair for a period of minimum 5 years should be attached. | Numbers | 2.00 | 4,49,437.1 | 8,98,874.2 |
| 232 | Installation testing and commissioning with all the required accessories and other equipments of single face R G B True colour mini video display (MVD) size pixel resolution (W*H) 320*192.Inspection-Consignee. | Numbers | 2.00 | 1,30,181.78 | 2,60,363.56 |
| 233 | Supply of GPS based Outdoor True Colour LED Tower clock With metal canopy. INSPECTION: RITES. | Numbers | 1.00 | 7,66,532.83 | 7,66,532.83 |
| 234 | Installation, testing and commissioning of GPS based Outdoor True Colour LED Tower clock. | Numbers | 1.00 | 63,187.11 | 63,187.11 |
| 235 | Supply , installation commissioning of True colour video outdoor display unit ( 3072 mm X 3840 mm ) . Inspection by Rites. Thisincludes laying of OFC & CAT 6 cable with supply of suitable fixing arrangement of pole mounted / wallfixing as per site requirement ( All material including PVC pipe , fixing material wiill be supplied by Contractor) | Numbers | 1.00 | 19,92,472.66 | 19,92,472.66 |
| 236 | Supply of Fiber Distribution Management system FDMS/LIU for 48 Fiber as per drawing No. RDSO/TCDO- 170(a) or latest complete with all accessories such as patch cord & pigtail etc. as per TEC Spec. GR/FDM/01/02 April '2007 or latest. This includes supply of installation accessories as per technical specification. Inspection: RITES/Consignee. | Numbers | 3.00 | 10,198 | 30,594 |
| 237 | Execution of Straight joint on Quad cable/jelly filled Telecom cable using Thermo-shrink/Universal jointing kit (RTSF). This includes excavation of a cable joint pit of size 1.5 m. X 1.5 m. X 1.2 m. for jointing of cables, back filling and ramming after jointing. After joining, the cable through test such as insulation test, continuity test etc. to be carried out jointly with the Railway Engineer. If any defect or any damage is observed during jointing the contractor has to redo the joint free of cost. Note: In case jointing is required to be done in the Location boxes, then 80% payment will be released. SOR ITEM NO. 14142 | Numbers | 3.00 | 1,434 | 4,302 |
| 238 | "Supply and fabrication of GI cable tray with fixing arrangement as per Annexure Inspection: Consignee" | Kg | 200.00 | 102.02 | 20,404 |
| 239 | Fixing , commisionning of cable tray as per site supervisor | Kg | 200.00 | 9.38 | 1,876 |
| 240 | Supply and installation of independent Iron Structure post including water proof protection arrangement with canopy for Horn unit at platform are including painting and erection. Inspection- CONSIGNEE | Numbers | 5.00 | 2,409.81 | 12,049.05 |
| 241 | "Supply of Power Extension box, as per annexure INSPECTION : CONSIGNEE. " | Numbers | 5.00 | 629.86 | 3,149.3 |
| 242 | Supply of 2 Mbps modem having (V.35 + G.703) interface operating with AC & -48DC, as per Specication No. RDSO/SPN/TC/80/2020 Rev.2.0 or latest. Make: Nomus/MROTEK or similar. Model: Nomus Gateway e/2M/2W/G.703/V.35 or similar. Inspection: RDSO/Consignee. | Pair | 2.00 | 16,461 | 32,922 |
| 243 | Supply of 32A DP C MCB, Specification: IS/IEC 60898- & IEC 60898-1. Make: Havells or similar. Model: DHMYCDPM032/better, Inspection: Consignee. | Numbers | 4.00 | 611 | 2,444 |
| 244 | Supply and Installation of Double pole Residual Current Operated Circuit -Breakers , (RCCB, 40A, 415V, 30mA, REINS), .Inspection: Consignee | Numbers | 4.00 | 1,575 | 6,300 |
| 245 | Supply and Installation of of single pole MCB 10A, .Inspection: Consignee | Numbers | 10.00 | 232 | 2,320 |
| 246 | "Supply of 16 A DP C MCB, Type: Double Pole, Rated Short Circuit Breaking Capacity: 6 kA, Rated Impulse Voltage: 4 kV, Rated Insulation Voltage: 690 V, Rated Voltage: 240 V AC / 415 V AC, IP20, Specification: IS/IEC 60898-1 & IEC 60898-1. Make: Havells or better. Model: DHMXCDPZ016 or better.Inspection: Consignee" | Numbers | 8.00 | 441 | 3,528 |
| 247 | Supply and Installation 16 channel MCB BOX, .Inspection: Consignee | Numbers | 3.00 | 2,955.82 | 8,867.46 |
| 248 | "Supply & installation of RJ-45 dual faceplate input-output module Inspection: (i) RDSO/RITES if value of item in work more than 5 lakhs or as per extant policy(ii) Consignee if value of whole item in work less than 5 lakhs " | Numbers | 20.00 | 586.49 | 11,729.8 |
| 249 | "Supply and installation of lightning and surge protection device both Class 'B' & Class 'C' between line and neutral and neutral & earth of approved type as per AnnexureInspection: (i) RDSO/RITES if value of item in work more than 5 lakhs or as per extant policy(ii) Consignee if value of whole item in work less than 5 lakhs " | Numbers | 2.00 | 24,449 | 48,898 |
| 250 | Fixing of 12/10 pair weather proof C.T. Box WAGO type and termination of 6 quad jelly filled cable on teak wood plank of size 375 mm. x 250 mm. x 20 mm. thickness. | Numbers | 4.00 | 344 | 1,376 |
| 251 | Installation of 100/50/20 pair Krone terminal Box on teak wood plank of size 330 X 200 X 25 mm. plank and wiring. Teakwood plank and other materials like screws, bolts etc. to be arranged by the contractor. | Numbers | 2.00 | 379 | 758 |
| 252 | Termination of telecom cable at cable hut and panel room, fixing of block filter units and cable termination boxes to the wall in panel room, wiring VF transformers, block filter units, block bell equipment including draw of cable through GI/PVC pipe, termination on to terminals and doing other works associated with commissioning of derivation of block working as per instructions of supervisor in charge of work. Note: Cables, CTB, Filter units, Block bell equipment, VF Transformers, GI Pipe, and Cement will be supplied by Railways. All other materials including Angles, PVC pipe etc. will be arranged by the Contractor.Here the unit JOB = LS | Job | 2.00 | 2,700 | 5,400 |
| 253 | Testing and commissioning of the system: This work involves the Testing of Underground six quad cables in each repeater section after laying and jointing. These readings to be recorded and supplied to the Railway Engineer. This involves all the tests to be carried out such as measurement of loop resistance, insulation test, frequency attenuation, cross talk and noise level etc. | Numbers | 1.00 | 3,329 | 3,329 |
| 254 | Supply of Tributary interface card of Webfil make PD Mux (flexi Mux) as per Specification No. IRS:TC/68/12 Rev.0 with amendment no.1 or latest. Inspection: RDSO/ Consignee. SOR ITEM NO. 14158 | Numbers | 2.00 | 48,050 | 96,100 |
| 255 | Supply of Network interface module (NIM) interface card compatible with existing PD Mux (flexi Mux) as per Specification No. IRS:TC/68/12 Rev.0 with amendment no 1 or latest. Inspection: RDSO/ Consignee. SOR ITEM NO. 14160 | Numbers | 2.00 | 33,984 | 67,968 |
| 256 | Supply of standard 19"rack mountable , -48V DC working, Add-Drop STM-4 SDH equipment conforming to GR No. TEC/GR/TX/SDH - 010/03.Jan 2011 (with latest amendment) | Numbers | 1.00 | 2,01,312.79 | 2,01,312.79 |
| 257 | Installation and commissioning of STM-4 | Numbers | 1.00 | 24,103.07 | 24,103.07 |
| 258 | Supply and installation of "FRANKLIN ROD" as per NFPA- 780 Standards as per ER Drawing No.-SI/TYP/103. Installation to be done as per IEC standard. It also includes connection of down conductor with Franklin Rod and running of down conductor through PVC pipes and connecting the same to nearby earth electrode. All material required for installation to be supplied by the contractor. Inspection: RITES/Consignee.SOR ITEM NO. 1327 | Numbers | 1.00 | 66,093 | 66,093 |
| 259 | Supply and erection of a mast/high mast lightning protection installation, mechanically robust good corrosion and fire resistance, 5 mtr. (including 2 mtr. FRP) long GI/MS painted along with guying kit foundation and other accessories required for installation of mast. Supply material inspection by consignee.SOR ITEM NO. 1328. Here the unit JOB = Per Job | Job | 1.00 | 9,038 | 9,038 |
| 260 | Supply of copper bonded steel conductor of size 50 Sq.mm. as per IEC/EN 62561-2 (VDE 0185-561-2) for connecting A-class LA to earth. Inspection: RITES/Consignee. SOR ITEM NO. 1329 | Metre | 20.00 | 320 | 6,400 |
| 261 | Supply of Lightning Strike recorder LSC 6 digits shall be weather proof type. It should have a 6-digit event count & the capacity to count the smallest strike of intensity 3 KA. It should be a voltage sensing type counter so that it will register nearby strikes & static discharge due to induction effect as per IS 2309:1989 or latest. Make-Bakiral or better. Inspection: RITES/Consignee. SOR ITEM NO. 1330 | Numbers | 1.00 | 12,334 | 12,334 |
| 262 | Fixing of Down Conductor through HDPE Pipe for A'- Class Surge Arrestor. HDPE pipe will be supplied by Rly. Note: No. in Unit column indicates per Arrestor. SOR ITEM NO. 1331 | Numbers | 1.00 | 623 | 623 |
| 263 | Increasing the height of 'A' Class Surge Arrestor (3 Mtrs. above of VHF Antenna). Dismantling of existing 'A' Class Surge Arrestor & refixing as per the instruction of Rly. site engineer. All the items required for cement concreating & refixing will be supplied by the contractor. SOR ITEM NO. 1332 | Numbers | 1.00 | 2,546 | 2,546 |
| 264 | Supply of 48 Volt/200 AH maintenance free VRLA Batteries duly charged as per IRS Spec. No. S-93/96(A) with Amendment-1 or latest. Inspection: RDSO/Consignee. SOR ITEM NO. 1475 | Numbers | 1.00 | 1,20,997 | 1,20,997 |
| 265 | Installation, wiring, testing & commissioning of 48 Volt/200 AH or 48 V/300 AH maintenance free VRLA Batteries duly charged as per IRS Spec. No. S-93/96(A) with Amendment-1 or latest. SOR ITEM NO. 1476 | Numbers | 1.00 | 19,702 | 19,702 |
| 266 | Supply of 2 MB Programmable Primary Digital drop insert multiplexer as per RDSO Specs. IRS TC- 68/2004 (Amnd.1) or latest with conference facility and other stipulation to tender documents and fully wired for 30 channel complete with power supply card, remote control, supervision facility and all other accessories, installation material, manuals etc. It should have facilities to accommodate data interface card in multi drop mode and should be able to support cards needed for video conferencing and ISDN. It shall support NMS installed at Test Room and may operate local/remote location of entire section. It also includes submission of all technical documents, manuals and supply of all miscellaneou s items which will be required for final testing and commissioning of system. The above MUX should be equipped with following circuits: - i) 2 wire/ 4 wire E&M VF circuits ( minimum 16 nos ckts) ii) Subscriber loop circuits ( minimum 4 nos ckts) iii) Exchange loop interface circuits (minimum 8 circuits ) iv) This also includes connecting all pigtails, optical patch cords etc. to the SDH equipments. This also includes connection of SDH and primary MUX equipment with all interface cards to the 48V Bus including supply of wires and connectors termination of all evens on DDF taking PVC cable over runway or a wall and termination of VF interface circuit to the Krone type. Inspection:(i) RDSO if value of item in work more than 5 lakhs o r a s p e r extant policy (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in | Numbers | 1.00 | 1,35,325.97 | 1,35,325.97 |
| 267 | Supply of optic fiber splice closure (48 fiber) as per technical Specification No. G/OJC-02/01, March'99 with latest amendment or latest including all miscellaneous items and consumables for fiber splicing. Inspection: RITES/Consignee. | Numbers | 4.00 | 4,522 | 18,088 |
| 268 | Supply and installation of 4k Smart Television Tv 55 Inch LED Backlitas per technical specification in Annex K Brand: LG , Sony , Samsung or similar/superior . Inspection ; Rites | Numbers | 4.00 | 71,272 | 2,85,088 |
| 269 | Supply and installation of protective arrangement for 55" LED TVincluding installation and commissioning of the TV as per site conditionas directed by site Engineer . The TV is to be housed inside powercoated GI cabinet ( 16 SWG) .The front of the cabinet should becovered with 6 mm thick transparent fiber sheet to protect the TVscreen. Suitable vent grill is to be provided at the two side withopening for the power/signal cable at one side . Inspection : Consignee | Numbers | 4.00 | 31,401.22 | 1,25,604.88 |
| 270 | Supply of Copper bonded steel electrode of 3.0 m. long, 17.2 mm. dia. with copper bonding thickness of minimum macrons and UL listed as per RDSO Spec. No RDSO/SPN/197 Ver.1.0 or latest and conforming to RDSO Drg. No. SDO/RDSO/E&B/001 or Latest. Necessary testing certificate of UL, IEC to be produced. Inspection: RDSO/Consignee. | Numbers | 2.00 | 4,858 | 9,716 |
| 271 | Supply of Copper Strip 25 X 6 mm. Inspection: RDSO/Consignee. | Metre | 25.00 | 873 | 21,825 |
| 272 | Supply of Copper tape for BRC(25 X 2) mm. Inspection: RDSO/Consignee. | Metre | 25.00 | 317 | 7,925 |
| 273 | Supply of Earth Enhancement material for treatment of earth pits as per Specification No. RDSO/SPN/197/2016 Ver.1.0 or latest. Inspection: RDSO/Consignee. | Kg | 3.00 | 147 | 441 |
| 274 | Supply of 50 mm. x 6 mm. GI tape for interconnecting earth electrodes. Inspection: Consignee. Inspection: RDSO/Consignee. | Numbers | 20.00 | 541 | 10,820 |
| 275 | Installation of GI Tape (50 X 6 mm.) for connecting Main earth pit to other earth pit in case of loop earth. Note: 'No' in the unit column indicates 'per pair of earth pit'. | Numbers | 20.00 | 100 | 2,000 |
| 276 | Supply and Execution of Exothermic Welds for more than 16 sq. mm. wire. This includes a Welding Kit, Welding Powder, Mould and other necessary materials. Note - No. in unit column indicates per welding. Inspection: RDSO/Consignee. | Numbers | 10.00 | 498 | 4,980 |
| 277 | Supply and Execution of Exothermic Welds for upto 16 sq.mm. wire. This includes a Welding Kit, Welding Powder, Mould and other necessary materials. Note- No. in the unit column indicates per welding. Inspection: RDSO/Consignee. | Numbers | 10.00 | 382 | 3,820 |
| 278 | Installation of MEEB/SEEB/BRC with the insulators (As per the instruction of Site Engineer). Fitting materials & Insulator (Dough Moulding Compound Conical type of different Size) as per the site requirement to be supplied by the contractor. Note: 'No' in the unit column indicates 'per insulator'. | Numbers | 5.00 | 32 | 160 |
| 279 | Supply of Nut Bolts, Washer (Stainless Steel) as per the site requirement (One set consists of 1 Nut, 1Bolt, 2 washer & 2 spring washer) Note: Hex Nuts, bolts and washers of size 5/16". Inspection: Consignee. | Set | 5.00 | 27 | 135 |
| 280 | Supply of 1 x 10 (140/0.3) Sq.mm. multi strand copper power wire as per RDSO Spec. No. IRS:S-76/89 (Amdt.3) or latest. The color of the wire which is required will be specified by the Engineer in charge. Inspection: RDSO. SOR ITEM NO. 0403 | Metre | 25.00 | 134 | 3,350 |
| 281 | Supply of OFC single mode 6 fiber unarmoured cable, conforming to TEC Spec. No. GR/OFC14/01.AUG.2005 or Latest. Make Molex/AMP/Finolex or similar. Inspection: RITES/Consignee. SOR ITEM NO. 1401 | Metre | 2000.00 | 28 | 56,000 |
| 282 | Supply of Online UPS 15 KVA Online UPS 3ph/1ph with inbuilt isolation transformer at UPS output along with 12V- 65AH-16 Nos SMF batteries to get 30 minutes backup Make : APC/ Power One/ Vertiv or better. Inspection : RITES | Numbers | 1.00 | 3,88,676.6 | 3,88,676.6 |
| Schedule total | ₹7,68,72,269.18 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_221.pdf
ATTACHMENT
CORRECTIONSLIPMERGED.pdf
ATTACHMENT
SHRAMIKKALYAN.pdf
ATTACHMENT
2025_06_24SeekingclarificationonapplicabilityofGCCCorrectionSlipNo_101.pdf seeking correction slip of 10
ATTACHMENT
DOCUMENTVERIFICATION.pdf
ATTACHMENT
ANNEXUREMLOC.pdf
ATTACHMENT
ANNEXURENLOC.pdf
ATTACHMENT
ANNEXURE-H.pdf
ATTACHMENT
AnnexureK.pdf
ATTACHMENT
ANNEXURE-L.pdf
ATTACHMENT
bidseurity.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_111_compressed.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_12_compressed.pdf
ATTACHMENT
HowrahABSStenderdocument_1.pdf
ATTACHMENT
2025_06_24SeekingclarificationonapplicabilityofGCCCorrectionSlipNo_101.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .