Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.5 LAccepted-Finance | L1 | Accepted-Finance Quoted Correctly | |
| 2 | L2₹30.8 L+₹4.2 L (15.8%)Accepted-Finance 546 14 JUTOGH CANTT SHIMLA HP 171008 | SHIMLA | HIMACHAL PRADESH | 171008 | L2 | Accepted-Finance Quoted Correctly | |
| 3 | L3₹31.2 L+₹4.7 L (17.7%)Accepted-Finance H NO 24 BEHIND GURUDWARA JUTOGH CANTT SHIMLA HP 171008 | SHIMLA | HIMACHAL PRADESH | 171008 | L3 | Accepted-Finance Quoted Correctly |
| Sl No | Description | Qty | Unit | M/S Meera Builders L1 | M/S J.S.ENTERPRISES L3 | M/S kuldeep kumar khullar L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavating in post holes hard/ dense soil (or similar holes) each n. exc 0.5 cum, getting out, returning, filling in and ramming earh or broken rubble mixed with earth around , in layers not exceeding 25 cm. complete all as specified and directed. | 54 | Each | 100 ₹5,400 Lowest | 233 ₹12,582 | 120 ₹6,480 |
| 2.00 | M&L for PCC 1:3:6, type C-2, using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete including sub base of floors and floor finishing complete all as specified and directed. | 9 | Cum | 5,000 ₹45,000 | 3,200 ₹28,800 Lowest | 5,000 ₹45,000 |
| 3.00 | S&F structural steel work as in roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framing (beam, tee, angle, gusset plate,channel or flat section including distance pieces, cleats etc, structural steel confirming to Fe-410w, Gde 250, quality - 'A', complete all as specified and directed. | 2,030 | Kg | 100 ₹2,03,000 Lowest | 100 ₹2,03,000 Lowest | 100 ₹2,03,000 Lowest |
| 4.00 | M&L for steel work in tubular trusses, columns, purlins and rafter including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, complete all as specified and directed. | 1,780 | Kg | 105 ₹1,86,900 Lowest | 130 ₹2,31,400 | 115 ₹2,04,700 |
| 5.00 | S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges, flashing, eaves board, valley gutter etc, fixed all as per manufactures's instructions, fixed with self tapping screws and covered with silicone sealant as directed, at site with suitable arangement as required, complete all as specified and directed. | 205 | Sqm | 700 ₹1,43,500 Lowest | 777 ₹1,59,285 | 720 ₹1,47,600 |
| 6.00 | S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges, flashing, eaves board, valley gutter etc, fixed all as per manufactures's instructions, fixed with self tapping screws as directed at site with suitable arangement as required, complete all as specified and directed. | 44 | Sqm | 700 ₹30,800 Lowest | 700 ₹30,800 Lowest | 700 ₹30,800 Lowest |
| 7.00 | M&L for preparing new steel surfaces exc 10cm girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 55 | Sqm | 80 ₹4,400 Lowest | 120 ₹6,600 | 85 ₹4,675 |
| 8.00 | M&L for 75mm thick plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate, laid in 1:20 slope as in plinth protection, coping, surface finished even and smooth without using extra cement, with and incl use and waste of necessary form work complete all as specified and directed. | 41 | Sqm | 350 ₹14,350 Lowest | 380 ₹15,580 | 360 ₹14,760 |
| 9.00 | M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe.290, Gde-E-165, complete all as specified and directed. | 400 | Kg | 110 ₹44,000 Lowest | 125 ₹50,000 | 120 ₹48,000 |
| 10.00 | M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in surface channel/ drains incl fair finises & necessary formwork complete all as specified and directed. | 6.5 | Cum | 5,000 ₹32,500 Lowest | 5,000 ₹32,500 Lowest | 5,000 ₹32,500 Lowest |
Tender Value
₹34.0 L
EMD Value
₹68,100
Closing Date
25 Oct 2025, 6:00 pmClosed
GE (I) JUTOGH
GE (I) JUTOGH, JUTOGH CANTT SHIMLA (HP) - 171008
PROVN OF 02 X BATHROOM, 02 X TOILETS, 01 X URINAL, 01 X STEEL WATER TANK STAGING AND PATH FOR MDC SHIMLA, 02 X TOILETS NEAR BLDG NO OQ-30 (GYM HALL) OF 22 JAK RIF, STORE CUM SHED NEAR BLDG NO MH-04, PARTITION AND WK STATION AND COVERED PATH WAY
2025_MES_732987_1
GE(I)/JUT-60 OF 2025-26
Open Tender
Civil Works
Item Rate
180 days
JUTOGH
CLASS D CATEGORY a (i)
8 documents required · 8 mandatory
₹500
GE (I) JUTOGH
₹68,100
Yes
28 Oct 2025
27 Sept 2025
27 Oct 2025
27 Sept 2025
25 Oct 2025
11 Oct 2025
27 Sept 2025 - 4 Oct 2025
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.36 MB
BOQ_820707.xls
BOQ • 0.78 MB
tenderdocuments.pdf
Tender Documents • 2.48 MB
ResidualworkloadFormat.pdf
Additional Documents • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .