GE/ALP (8205B) KOLKATA OF 2023-24

Amount

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc.complete all as specified and directed.

Material and labour for 15 mm thick rendering on fair faces of brick work in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

Material and labour for 5mm thick rendering in cement mortar (1:3) on concrete surface as in ceiling and finished the surface even and smooth without using extra cement complete all as specified and directed.

Dismantling fibre glass reinforced translucent corrugated sheet of any guage, thickness complete all as specified and directed

Supply and fixing for Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for Preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling surface etc complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer (upto 12 storey bldg) complete all as specified and directed.

Dismantling bitumenous felt of any type and disposed of the same complete all as specified and directed.(Up to 12 storey Bldg)

M&L for Water Proofing treatment on existing cleaned RCC Roof with the following Specifications and Manufacturer's instructions, complete all as specified and as directed :- (a) Rendering 10mm thick in Cement Mortar 1:4, Plastered surfaces finished even and smooth. The plastered surfaces shall be cured properly for 7 days by Ponding of Water over Roof. (b) Preparing and cleaning of fully dry Plastered Surfaces as per IS:3067-1966. (c) Applying Bitumen Primer conforming to IS-3384-1986 over the Cleaned Plastered Surface @ 0.30 Litre per Sqm. (d) Applying evenly One Coat Blow Hot Bitumen of grade 85/25 @ 1.20 Kg per Sqm on Primed Surfaces. (e) Applying a layer of APP based Polymeric Membrance 3.0mm thick (minimum) weighing 3.50 Kg per Sqm (reinforced) with Polyster Non-woven Fabric weighing not less than 160 Grams per Sqm by torch application. The Overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (f) Applying One Coat of Aluminium Paint @ 0.10 Litre per Sqm over APP based Polymeric Membrane.(Up to 12 storey Bldg)

Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) and removing debris and rubbish off the premises.

Material and labour for non - skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, infloors etc. set and jointed in neat cement slurry and pointed in white or colouredcement to match the shade of tiles over and including screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.(upto 12 storey high building)

Material and labour for colour printed glazed ceramic tiles (Premium quality) (450X300mm) X 7mm thick as in walls set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over and including 10 mm thick cement plaster in CM (1 : 4) complete all as specified and directed.

Material and labour for double charged vitrified coloured tiles (Premium Quality) of size (600x600mm) x 8-9mm thick in floor, etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over and including 15 mm thick screed bed in CM (1 : 6 ) for laying of floor finishes complete all as specified and directed.

All as per item No 13 here-in-before but fixed on vertical surface as on skirting over and including 10mm thick cement plaster in cement mortar (1:4) .

Dismantling wrought iron or mild steel work of any description as in door, gates etc and similar works complete all as specified and directed.

S & F for framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars barred iron doors; ladders framed alusters; wald ways; railings; framework of water tanks and similar work confrming to Fe-290 Gde -E 165.

Taking down steel window/ventilator including guard bar of any description and in any position and removing from site complete all as specified and as directed. (upto 12 storied bldg).

Taking down chowkhat or frames with shutter not exc. 1.5 Sqm each (without taking of shutters from the frames) complete all as specified and as directed. (upto 12 storied bldg)

Taking down chowkat or frames with shutter exc. 1.5 Sqm but n.exc. 4 Sqm each (without taking of shutters from the frames) upto 12 storied bldg complete all as specified and directed.

Taking down wooden shutters of any description exc 1.00 Sqm but n.exc 2.00 Sqm each (upto 12 storied bldg) complete all as specified and as directed.

Hacking out old/broken glass (any description, size and quality) upto 12 storied bldg complete all as specified and directed.

Supply and fixing for mild steel flat iron of size 25x3 mm or equivalent as required for hold fasts and clamps & similar small articles confirming to Fe-410-O or Fe-310-O (upto 12 storied bldg) complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in hold fast, bed plates, copings etc. including necessary formwork (upto 12 storied bldg) complete all as specified and directed.

S&F for 2nd Class HW Plain, solid, straight chowkhat and frames, wrought framed rebated on the solid, rounded or chanfered, put together with glue pinned at joints all as specified and as directed. (upto12 storey High of building)

Supply and fixing for 30mm thick factory made flush door shutters solid core construction with block board core and plywood face panels commercial type on both faces upto 12 storied bldg complete all as specified and directed.

S&F for 35mm thick 2nd class hard wood gauged & skelton shutter, open rebated & prepared to receive gauged, ( without sase bar ) eadge of framing plain, chamford or rounded, fitted with cut & mitred beads for securing gauged etc, complete all as specified and directed. (upto 12 storey High of building)

S&F for solid PVC door frame of size 50mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS Square tube in opening all as shown on drawing and specified (upto 12 storied bldg).

Supply and fixing for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match,reinforced with MS Sq tube in opening all as shown on drawing (upto 12 storied bldg) complete all as specified and directed.

S&F for factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drawing. (upto 12 storied bldg.)

S&F for factory made solid PVC Moulded door shutter 28 to 30 mm thick(stiles) with 2 mm thick prelaminated Moulded PVC sheet polyurethane painted on the front face & 2 mm plain colour PVC sheet on back faces,and with particle board core supplying and fixing in frame at site as per specification and drawing (upto 12 storied bldg) complete all as specified and directed.

Supply and fixing for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded for receiving glass and including cutting holes in wall for fixing the window and making good the disturbed surfaces with the existing finishes to match (upto 12 storied bldg) complete all as specified and directed.

As per item No 31 but without glazing bars complete all as specified and directed.

Supply and fixing for steel ventilators with tope hung shutters including hinges with steel handle and steel peg stay,Glazing bar dovetailed or welded for receiving glass and including cutting holes in wall for fixing the ventilator and making good the disturbed surfaces with the existing finishes to match (upto 12 storied bldg) complete all as specified and directed.

S&F Powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 80mmX25mmX1.55mm and shutter of section 20mm X20mm X1.55mm including ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including with necessary all fittings complete all as per manufacturer's instructions complete all as specified and as directed.

S&F in repair aluminium anodised Partition wall of frame size 80mm x 38mm x 3.00 mm with standard beads/glazing clips, locking arrangement etc with necessary all fittings complete all as per manufacturer's instructions complete all as specified and as directed.

Supply and fixing in repair powder coated aluminum ventilator (single leaf single shutter) side hung type with stainless steel butt hinges, one shutter glazed with and including 4.00mm thick plain sheet glass and other shutter with stainless steel wire cloth of 0.36 mm dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples, rubber gasket, stopper,aluminium anodised handle 100mm long ,aluminium anodised tower bolts 100mm long and peg stay etc, size of aluminum frame shall be 100mmx50mmx1.50mm and shutter frame shall be 40mmx20mmx1.50mm complete all as specified and as directed. (upto 12 storied bldg) Note : 1 No Glazed shutter and 1 No Gauged shutter constitube one unit.

Supply and fixing for stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel staples in steel/wooden /aluminium frames (upto 12 storied bldg) complete all as specified and directed.

Supply and fixing in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel staples in steel/wooden /aluminium frames complete (upto 12 storied bldg) all as specified and as directed.

supply and fixing for 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exe 0.50 Sqm in each pane complete (upto 12 storied bldg) all as specified and as directed.

supply and fixing for 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square exe 0.50 Sqm in each pane (upto 12 storied bldg.) complete all specified and directed.

supply and fixing for 4mm thick figured glass, ordinary quality and glazing with oil putty in square n .exe 0.50 Sqm in each pane (upto 12 storied bldg) complete all as specified and directed.

Supply and fixing in repair for 18/19mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work as in kitchen cabinet shutter including external teak wood lipping 6mm thick fixed with nails (upto 12 storied bldg ) complete all as specified and directed.

S&F in repair for 2nd class hard wood Plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 3.00 Sqcm & n exc 6.00 Sqcm (upto 12 storied bldg.) complete all as specified and as directed.

S&F in repair 6mm thick plywood in cupboards. (upto 12 storied bldg.) complete all as specified and directed.

Supply and fixing for curtain rods decorative aluminium alloy with fixing brackets including taking down old pelmet box complete all as specified and directed.

Supply and fixing in repairs 20/25mm fancy type bracket for drapery rods anodized aluminium alloy (upto 12 storied bldg) complete all as specified and directed.

Supply and fixing in repair floor door stopper of aluminium alloy body and tongue with hard drawn steel spring, overall length cover plate 150mm complete all as specified and directed.

Supply and fixing for 75mm size stainless steel butt hinges medium weight, cold rolled complete all as specified and directed.

Supply and fixing for 100mm size stainless steel butt hinges medium weight, cold rolled complete all as specified and directed.

Supply and fixing for 30mm width of flap continious piano hinges mild steel,bright finish or electro galvanised complete all as specified and directed.

S&F in magnetic catches 50 mm long of any description complete all as specified and directed.

Supply and fixing for 150mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fixing for 200mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fixing for 250mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

Supply and fixing for 40mm dia cupboard knobs of brass fixed with nut, screw and washer complete all as specified and directed.

Supply and fixing for 75mm Hasp and staple, safety type brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F for 100mm long Aluminium,anodised extruded handle fabricated type, complete all as specified and directed

S&F for 150mm long Aluminium,anodised extruded handle fabricated type, complete all as specified and directed.

Supply and fix in repairs 0.56 mm thick Plain, Aluminium sheeting, Alloy 31000 H4 drip and straight flashing complete all as specified and directed.

Supplying and fixing in repair 1.25mm thick steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed.

Oiling/greasing existing rolling shutters for easing adjusting for smooth functioning of steel rolling shutter complete all as specified and directed.

S&F for lock plate bracket made of angle 40X40X5 mm, flat 25X6 mm, cleat, latice flat & locking arrangement etc of rolling shuttes including necessary welding / riveting and one coat of red oxide primer including taking down old lock plate complete all as specified and directed.

S&F for mild steel slot profiles of 1mm thick including taking down old profiles complete all as specified and directed.

Supply and fixing as in repair mortice lock set combipack with 6 lever and with decor brass handle set complete all as specified and directed. Make : Godrej Cat No 8286 or equivalent as approved by the GE.

Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Resecuring or easening, adjusting without taking down of shutters exc 1 Sqm but n.exc 2 Sqm each.

Dismantiling brick work built in cement mortar for making AC opening in existing wall inclding making good the adjacent area with cement mortar (1:4) and distempering two coats etc including M & L for second class hard wood frame 50x40mm (Appx area 0.5sqm each)complete all as specified and directed.

M&L for easing adjusting of steel window and oiling greasing for smooth functioning including replacement of unserviceable peg stay , handle and nessessary welding for broken hook or glazing bar (upto 12 storied bldg) complete all as specified and directed.

M&L for easing adjusting of aluminum window and refitting of shutter section with screw including replacement of unserviceable locking arrengment ,stay hook and nessessary neoprene beading (upto 12 storied bldg) complete all as specified and directed.

Supply and fixing for stay/ handle cleat as per requirement at site and welded complete for fixing of handle /stay in steel windows including taking down old one complete all as specified and directed.

Taking down wooden shutters of any description exc 1.00 Sqm but n.exc 2.00 Sqm each and refixing the same in the same opening (upto 12 storied bldg) complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal.

Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal.

Dismantling cast iron or re-inforced concrete drain pipes of 100mm bore, jointed in cement mortar complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixingor removal to Store (measured overall as fixed along the centre line over fittings and accessories)

M&L for cutting chases, pinning, in making good to facing where required of of brick wall and pointing in cement motrar 1:3 to ends and cutting chases for concealed water tubing and concealed conduit wiring ete and making good surfaces

Supplying and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

Supplying and laying for 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

Supplying and laying for 32 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

S&F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and directed.

S&F in repair 25mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and directed.

S&F for CI spun pipes with out ears in any length fixed to wall with brackets of 100mm bore including bitummous paints both side complete all as specified and directed.

S&F for CI bend with door of 100mm bore complete all as specified and directed.

S&F for CI branch pieces single equal or unequal with door of 100mm bore complete all as specified and directed.

S&F for CI 'T' of 100mm bore complete all as specified and directed.

S&F for CI cowl of 100mm bore complete all as specified and directed.

S&F for 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and directed. (upto 04 storey High of building)

S&F for 110mm bore PVC(SWR) pipe bend single socket complete all as specified and directed.

Supply and fixing for 110 mm dia PVC (SWR) junction single, (singleT), equal or unequal fixed to wall upto any height of the building complete all as specified and directed.

S&F for 75mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and directed. (upto 04 storey High of building)

S&F for 75 mm bore PVC(SWR) pipe bend single socket complete all as specified and directed.

Supply and fixing for 75 mm dia PVC (SWR) junction single, (single T), equal or unequal fixed to wall upto any height of the building complete all as specified and directed.

S&F in repair 15mm bore GI short piece pluging and screwing to fittings complete all as specified and directed.

S&F in repair 20mm bore GI short piece pluging and screwing to fittings complete all as specified and directed.

S&F in repair ball valve including nessesary fittings fixed to existing flushing cistern complete all as specified and directed.

S&F in repair wall mixture non telephonic brass CP tap for mixing hot and cold water including three joints to 15 mm bore pipes or union and pluging and screwing to wall complete all as specified an d directed.

Supplying and fixing in repairs wash hand basin mixture, 15mm bore dia, fancy type brass chromium plated for mixing 'Hot' and 'Cold' water including three joints, screwed both ends for iron pipe or for unions and pluging (upto four storied of building) complete all as specified and directed.

Supply and fixing as in repair spindle for 15 mm bore bib cock / stop cock / pillar tap complete all as specified and directed.

Supply and fixing as in repair brass CP knob for 15mm dia bib cock/pillar cock concealed stop cock complete all as specified and directed.

Supply and fixing as in repair 15mm dia PVC connection pipe 600mm long with PTMT nuts complete all as specified and directed.

S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and directed. (upto 12 storey high of building).

Supply and fixing as in repair 32 mm dia PVC flush pipe of polyethylene of low or high density for low level cistern/kitchen sink/WHB complete all as specified and directed.

Supply and fixing as in repair chromium plated peg set of 6 with screws complete all as specified and directed.

Supply and fixing as in repair chromium Plated towel ring square with round flange complete all as specified and directed.

Taking down serviceable with WHB /kitchen sink and refixing the same after replacing new CI brackets on wall and making good the surfaces as per existing specification complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fixing as in repair chromium plated soap dish holder complete all as specified and directed.

S&F in repair towel rail of brass chromium plated tube 19 to 20 mm dia 600 mm long `D' type complete with brass chromium plated screw complete all as specified and directed.

Supply and fixing as in repair chromium plated toilet paper holder complete all as specified and directed.

S&F for corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 300mm long complete all as specified and directed (upto 04 stories building).

S&F in repair for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair PVC water closet seat cover heavy duty coloured closed pattern with flat bottom and cover and mild steel CP hinnging device complete.

S&F in repairs Vitreous China wash basin ( white), flat back, size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and as directe. (upto 12 storey high building)

S & F in repair vitreous china squatting pan of orissa pattern long pan of size 580 mm x 440mm with integral foot rest white with cast iron 'P' or 'S' trap with back inlet including flush pipe of suitable length to connection with existing cistern & make good complete all as specified and directed. (upto12 storey high building)

S&F in repair 15mm bore Brass CP bib cock fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and complete all as specified and directed. (upto 12 storey high building)

Supply and fixing in repair concealed 15 mm bore CP stop cock with sliding flange 15 mm all as directed.

Supply and fix in repair pillar taps made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as specified and directed.

S&F in repair brass CP shower roses with or without swivel joints,with shower arm, 125mm size, including fixing to steel pipes or union complete all as specified and directed. (upto 12 storey high building)

Supply and fix in repair angular stop cock made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as specified and directed

S&F in repair for cast 100mm dia iron floor traps with steel grating jointing to waste pipe fixed in cement concrete type B1 (1:2:4) (using 20mm graded stone aggregate). complete all as specified and as directed

DIPAK ENTERPRISE

M/S AVIJEET INTERNATIONAL

THE PLANTERS ENGINEERING CORPORATION

SOVA ENTERPRISE

SOMANI BUILDERS

KT CONSTRUCTIONS

P N GUPTA AND SONS