Civil works

DSR-2023, Item No.2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

DSR-2023, Item No.2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m andfor all lift.

DSR-2023, Item No.4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

DSR-2023, Item No.5.1.3 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

DSR-2023, Item No.5.1.25 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

DSR-2023, Item No.5.2.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

DSR-2023, Item No.5.9.1 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

DSR-2023, Item No.5.9.3 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform.

DSR-2023, Item No.5.9.5 Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

DSR-2023, Item No.5.9.6 Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

DSR-2023, Item No.5.12 Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

DSR-2023, Item No.5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

DSR-2023, Item No.5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

DSR-2023, Item No.5.43.1 Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints. For 200 mm wide.

DSR-2023, Item No.6.34.2 Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 coarse sand)

DSR-2023, Item No.11.56.2 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of all colour and texture except black, cherry/Ruby red

DSR-2023, Item No.8.3.2 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work

DSR-2023, Item No.8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

DSR-2023, Item No.8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

DSR-2023, Item No.9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.

DSR-2023, Item No.9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

DSR-2023, Item No.9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

DSR-2023, Item No.9.122.2 Providing and fixing to existing door frames. 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.

DSR-2023, Item No.10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

DSR-2023, Item No.10.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.M.S. tube

DSR-2023, Item No.10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete, i/c fixing the railingwith necessary accessories & stainless steel dash fasteners , stainlesssteel bolts etc., of required size, on the top of the floor or the side ofwaist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel membersshall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.).

DSR-2023, Item No.11.26.1 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

DSR-2023, Item No.11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

DSR-2023, Item No.11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

DSR-2023, Item No.11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete for Size of Tile 600x600 mm

DSR-2023, Item No.12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

DSR-2023, Item No.12.42.3.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion with110x110x110 mm

DSR-2023, Item No.12.42.5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion with Bend 87.5° with 110 mm bend

DSR-2023, Item No.12.5 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

DSR-2023, Item No.12.51.1 Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm)

DSR-2023, Item No.13.1.2 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

DSR-2023, Item No.13.2.2 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)

DSR-2023, Item No.13.21 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

DSR-2023, Item No.13.41.1 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre

DSR-2023, Item No.13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqmover and including priming coat of exterior primer applied@ 0.90 ltr/10 sqm).

DSR-2023, Item No.13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

DSR-2023, Item No.13.50.2 Applying priming coat with ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood.

DSR-2023, Item No.13.81.1 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Old work (one or more coats).

DSR-2023, Item No.13.88 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

DSR-2023, Item No.13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

DSR-2023, Item No.13.99.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

DSR-2023, Item No.13.111.1 Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

DSR-2023, Item No.13.112.2 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (one or more coats applied @ 0.83 ltr/10 sqm).

DSR-2023, Item No.14.1.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

DSR-2023, Item No.14.4.1 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge for door/ window/ clerestory window

DSR-2023, Item No.14.76 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge.

DSR-2023, Item No.14.77 Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm.

DSR-2023, Item No.14.81 Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-incharge.

DSR-2023, Item No.15.2.2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

DSR-2023, Item No.15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

DSR-2023, Item No.15.7.4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

DSR-2023, Item No.15.12.1 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below

DSR-2023, Item No.15.12.2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres

DSR-2023, Item No.15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

DSR-2023, Item No.15.40.2 Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead : Thickness above 40 mm up to 75 mm

DSR-2023, Item No.15.57 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

DSR-2023, Item No.16.68 Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

DSR-2023, Item No.17.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the wallswherever required:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

DSR-2023, Item No.17.35.1.2 Providing and fixing soil, waste and vent pipes : 100mm dia Centrifugally cast (spun) iron socket &spigot (S&S) pipe as per IS: 3989

DSR-2023, Item No.17.58.1 Providing lead caulked joints to sand cast iron/centrifugally cast(spun) iron pipes and fittings of diameter :100 mm

DSR-2023, Item No.18.7.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall with 20 mm nominal dia Pipes

DSR-2023, Item No.18.7.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall with 25 mm nominal dia Pipes

DSR-2023, Item No.18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls with 20 mm nominal dia Pipes

DSR-2023, Item No.18.8.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls with 25 mm nominal dia Pipes

DSR-2023, Item No.18.14 Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).

DSR-2023, Item No.19.30.1.1 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 455x610 mm and 45 cm deep for single pipe line :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

DSR-2023, Item No.19.19.1.1 Providing and fixing in position pre-cast R.C.C. manhole cover and frame Rectangular shapeL D- 2.5 600x450 mm internal dimensions

DSR-2023, Item No.19.2 Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg

DSR-2023, Item No.19.18.1 Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg

DSR-2023, Item No.19.18.2 Supplying and fixing C.I. cover without frame for manholes : 500mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg

DSR-2023, Item No.19.18.3 Supplying and fixing C.I. cover without frame for manholes : 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg

DSR-2023, Item No.21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

DSR-2023, Item No.21.1.2.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately. Powder coated aluminium (minimum thickness of powder coating 50 micron)

DSR-2023, Item No.21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

DSR-2023, Item No.21.16.2 Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge Powder coated minimum thickness 50 micron aluminium

DSR-2023, Item No.22.14.1 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

DSR-2023, Item No.22.14.2 Grading roof for water proofing treatment with Cement mortar 1:3 (1 cement : 3 coarse sand)

DSR-2023, Item No.26.30.1 Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. Upto and including 12mm dia.

DSR-2023, Item No.26.35.2 Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work.

DSR-2023, Item No.26.35.3 Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.)Epoxy injection grout in concrete/RCC work of approved make

Non schedule Supply of contingent Unskilled woker(labour)

Non schedule Supply of contingent semi skilled worker(Carpenter, Plumber ,Sweeper,Mason, Welder etc.)

Non schedule Supply of skilled worker(Diploma Supervisor)

Non schedule Supply of approved make mirror of superior glass (of approved quality) rectangular shape of 450mm x 600mm

Non schedule Supply of approved make mirror of superior glass (of approved quality) rectangular shape of 600 mm x 900 mm

Non schedule Supply brass stop cock of approved quality :15 mm nominal bore as per dirction of Engineering incharge.

Non schedule Supply ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore as per dirction of Engineering incharge.

Non schedule Supply ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore as per dirction of Engineering incharge.

Non schedule Supply ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore as per dirction of Engineering incharge.

Non schedule Supply uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore as per dirction of Engineering incharge.

Non schedule Supply C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore as per dirction of Engineering incharge.

Non schedule Supply C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore as per dirction of Engineering incharge.

Non schedule Supply C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg etc Complete as per direction of Engineer-in-Charge as per dirction of Engineering incharge.

Non schedule Supply of Counter Top Wash basin of size 56 x 41 cm of make Hindware (Cat. No- 10017) or equivalent make of Jaquar/Johnson as per dirction of Engineering incharge.

Non schedule Supply of Jaquar make Double Hook (Cat. No. ACNCHR- 1161N)or equivalent make of Hindware /Johnson as per direction of Engineering in charge.

Non schedule Supply of Jaquar make Hand shower (HEALTH FAUCET) with one meter long flexible tube and wall hook (Cat. No. ALD-CHR-573) or eualivant make as per direction of Engineering in charge.

Non schedule Supply of Jaquar make Long body bib cock with wall falnge (Cat. No. CON-CHR- 107KN) or eualivant make as per direction of Engineering in charge.

Non schedule Supply of Jaquar make Angular stop cock with wall flanges(CON-CHR- 059KN)or eualivant make as per direction of Engineering in charge

Non schedule Supply of stainless steel (SS 304 grade) adjustable friction windows stays of approved qualityfor the side hung windows as per direction of Engineer- in-charge complete.355 X 19 mm

Non schedule Supply of stainless steel (SS 304 grade) adjustable friction windows stays of approved quality for the side hung windows as per direction of Engineer- in-charge complete.510 X 19 mm

Non schedule Supply of ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of 30 mm thick

Non schedule Supply of aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : Size 250x16 mm

Non schedule Supply of aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm

Non schedule Supply of aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm

Non schedule Supply of aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm with plate 150 x 32

Non schedule Supply of aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade, with screwsetc. complete. Twin rubber stopper

Non schedule Supply of BWP ply of 12mm thick as per directions of Engineer- in-charge.

Non schedule Supply of BWP ply of 19mm thick as per directions of Engineer- in-charge.

Non schedule supply of Zinc alloyed ( powder coated) touch lock of 102 mm for aluminium sliding window of starlock or euivalent make etc complete as per direction of Engineer-in-Charge.

Non schedule Supply of Aluminium double adujustable roller withstand 90 kg load for sliding doors of "Mangalam (code-2705)"/starlock or euivalent make etc complete as per direction of Engineer-in-Charge.

Non schedule Supply of double adujustable 3/4 " section roller 20mm for Aluminium sliding windows complete item as per direction of Engineer-in-Charge.

Non schedule Supply of two point powder coated handle of 100 mm long for aluminium openable windows of approved brand as per direction of Engineer-in-Charge.

Non schedule Supply of SS aldrop 250mm x 16 mm x 3mm for door of required colour or shade, with nuts and screws etc complete as per direction of Engineer-in-Charge.

Non schedule Supply of goodrej make (Cat. No.-9158) 4 lever narrow mortise lock or equivalent with necessary fittings and reliable keys ,complete item as per dirction of Engineering incharge.

Non schedule Supply of 6 mm ET-125 & ST-450 toughened colour glass including cost and conveyance of material ,for complete item as directed by Engineer-in charge.

Non schedule Engagement of JCB for cutting and levelling of earth, spreading and levelling of materials including cost of operator fuel, T&P etc all completed as per the direction of Engineer- in-charge.

Non schedule Hiring of Tractor with truck for shifting of materail inside the campus including cost of fuel, driver etc. all complete

Non schedule Supply of mortice lock 180mm -/+ 5mm long Stella with 6 lever locking mechanism including both side SS finished handles of Godrej or euivalent make with necessary fittings and reliable keys ,complete item as per dirction of Engineering incharge.

Non schedule Supply of GI Metal Tile Lay-in Perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick

Non schedule Expansion Joint Treatment:Removing the plaster surface and clean the lose and laitanace over existing expansion joint.Then supplying and applying of backer rod ,polysulphide sealant and SIKA comiflex tape using sikadur-comiflex adhesive in over expansion joint and covering with aluminium sheet in vertical surface, & covering with cement concrtete and polysulphide sealant in horizontal surface copmplete including cost , coveyance ,taxes of all materials and labour etc as per direction of Engineering In Charge.

Non schedule Tile Grouting work:Cutting the existing tile joints ,Cleaning the groove then fill the groove with epoxy grout completely as per direction of Engineering In Charge.

Non schedule Bore Packing: Cleaning and dust free area around the bore then supply and fixing the backer rod , fill with SIKA grout 214 then seal the top portion with epoxy putty sikagard 694fi completely as per direction of Engineering In Charge.Pipe dia upto 110 mm

Non schedule Room window leakage:Clean the surface and filling gaps completely in between window and wall with polysulphide selant Nitoseal PU 50 as per direction of Engineering In Charge..

Non schedule Roof water proofing:Cracks repaising invlovs follows. 1.Surface to be made free from frost,surface laitance ,loose aggregate etc for fairly smooth finish. 2.Then cutting the all the roof cracks with V groove for filling completely with polysulphide sealant PU50 as per direction of Engineering In Charge.

Non schedule Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, This includes jointing with existing/ new pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal dia Pipes

Non schedule Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, This includes jointing with existing/ new pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of Engineer in Charge. External work 50 mm nominal dia Pipes

Non schedule Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, This includes jointing with existing/ new pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of Engineer in Charge. External work 65 mm nominal dia Pipes

Non schedule Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, This includes jointing with existing/ new pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of Engineer in Charge. External work 80 mm nominal dia Pipes

Non schedule Cleaning of sewerage sump /septic tank etc, by using Suction tankers of 4000 litre including cost of all labour charges, driver, fuel, loading and unloading ,taxes etc.all as per the direction of Engineer-in-charge.

Non schedule Provision for providing any item related to civil maintenanc work which is not covered in any item available in this contarct,to be procured as required by the institute.The lumsup cost shall includes the cost of purchase,tools, cartage,handling and supplying at desired site tc.The items shall be complete in all aspects including material, labour for trasportation & handling etc.The items under this head shall be required by the engineering in charge and shall be procured by the contractor.Contractor has to produce invoice for the item.the contractor shall be paid the actual material cost without GST plus 10 % of the above cost and applicabe GST@ 18% over the total amount.

Please Enable Macros to View BoQ information