PERIODICAL SERVICES AND REPAIR TO RCC CHAJJAS FACIA COLUMNS BEAMS CONNECTED ITEMS TO INTERNAL AND EXTERNAL SURFACES IN BLDGS AND REPAIR TO COMPOUND WALL FENCING CONCERTINA COIL DRAINS CULVERT AND MISC BR ITEMS IN C1 AND C1A AREA UNDER GE (E) MATHURA

Amount

M&L for preparation of old plastered surface of walls and applying one coat of cement base paint complete all as specified and as directed.

M&L for complete removal of existing treatment from old plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

M&L for preparation of old plastered surface of walls and applying two coats of exterior emulsion paint complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel and iron surface of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

M&L for complete removal of existing treatment from plaster surface of walls, prepration of surface and applying two coats of oil bound distemper complete all as specified and as directed.

M&L for preparation of old plastered surface of walls and applying two coats of oil bound distemper complete all as specified and as directed.

M&l for preparation of old plastered surfaces of walls and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old plastered surface of ceiling and applying two coats of white wash all as specified and as directed.

M&L for Providing 1 mm thick wall care putty on plastered surfaces of walls complete all as specified and as directed.

Taking down Cement plaster of any description from brick walls or concrete surface etc including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 10mm thick on fair face of brick work or concrete surface in cement mortar 1:6 and finish the surface even and fair complete all as specified and as directed.

M&L for rendering 10mm thick on fair face of brick work or concrete surface on ceiling in cement mortar 1:3 and finished the surface even and smooth (without using extra cement) complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preperation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Kg /Sqm of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering. Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit/STP/CICA as approved by GE.

M&L rendering 15mm thick on other than fair face of brick work or concrete surface in CM 1:4 by mixing liquid water proofing compound as per manufacturers instructions and finish the surface even and fair complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of new plastered surface of walls and applying two coats of exterior emulsion paint over and including a coat of primer complete all as specified and as directed.

M&L Obliterating old writing of any description n.exc 0.10 sqm with paint to match the existing work complete all as specified and as directed.

M&L for Writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 cm high with thick paint complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls with and including necessary clamps complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls with and including including necessary clamps etc complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F in repair 75 mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repair 110 mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) junction single (single 'T') complete all as specified and as directed.

Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M&L for 50mm thick sand stone slab as chajja & cover slab set and jointed over joists in cement mortar 1:3 complete all as specified and as directed.

S&F rolled mild steel in joist, channel, angle or Tee section fixed independently without connecting plate etc cut to ordinary length i.e. within 20 mm of length indicated) of Fe 410 W Gde E-250 quality 'B' complete all as specified and as directed.

M&L for Providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in coping, kerbs, roof padding etc as directed mixed with liquid water proofing compound as per manufacturer's instructions complete all as specified and as directed. Note : Liquid WPC shall be measured and paid separatly, relevent item(s) of this BOQ.

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep for fixing joist,angle, channel section and sandstone slab in chajjas upto G+2 floors and finishing face of groove with cement mortar 1:3 complete all as specified and as directed.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches, pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brickwork using old size fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for repairing the edge/corner of chajja/roof projection, ceiling and similar work by removing plaster width/girth exc 200 mm but not exceeding 300 mm and making good with plaster in two coat, comprising 10 mm thick dubbing coat in cement mortar 1:3 and finishing coat 10 mm thick in cement mortar 1:3, including providing chicken mesh wire netting 25, gauge, 20 mm mesh, between dubbing coat & finishing coat, match with existing surface complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F PVC Wall lining consisting of 5 mm thick printed PVC sheet in strip & channel feathered edges inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of 35mm wide for work panelling inclusive of fixing on to wall to make PVC frame all as specified and as directed.

Demolition of reinforced concrete of roofs, floor (other than ground floors) (reinforcement cut as required to facilitate demolition) beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.

Form work to side and soffits of floor or roof beams, lintels, contilevers shelves including supports etc flat for rough finished surface of concrete complete all as specified and as directed.

M&L for reinforced cement concrete 1:1.1/2:3 type A-1 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span and similar works complete all as specified and as directed.

M&L for providing precast cement concrete type B0 1:2:4 (using 12.5 mm graded stone aggregate) as in louvers and jallies 40mm thick (measured solid) including all mouldings set in cement mortar 1:4 complete all as specified and as directed.

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item serial No 45 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

Form work to soffits of suspended slabs such as roof slabs, floor slab, landing and similar flat work not exceeding 200 mm thick (Horizontal or sloping) for rough finished surface of concrete complete all as specified and as directed.

Form work to edges of concrete flat, floor and roof & slabs n exc 200mm wide (horozonal or slopping) for rough finished surface of concrete complete all as specified and as directed.

M&L for reinforced cement concrete 1:1.1/2:3 type-A1 (using 20mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 by mixing liquid water proofing compound as per manufacturers instructions and surface finished even and fair complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismandling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

Taking down steel gate by dismantling of pintel hinges replacing new hinges of mild steel angle 50x50x6 mm 450 mm long and 16 mm dia mild steel round 100 mm long pin by welding and refixing the same including PCC bed block of 200 x 200 x 400mm size for inserting hold fast in cement concrete type-I 1:2:4 (using 40mm graded stone aggragates) and making good including one coat of synthetic enamel paint etc. complete all as specified and as directed.

S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with & including either hooks, hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) hanging also fastening and fixing complete of FE 410-W (Gde-E-250) qualit A complete all as specified and as directed.

M&L cement concrete type C-1 1:3:6 (using 20mm graded stone aggregate) as in bed blocks for fixing hold fasts and fillling of chowkhats etc. complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion from natural ground and making good disturbed ground complete all as specified and as directed.

S&F mild steel work as in posts and struts in fencing posts including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillet (for securing wire mesh) including all necessary drilling bolting, or riveting etc and similar work confirming to Fe-290 Gde E-150 complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Supply only chain link mild steel galvanised fencing any size or type and weight n.exc 4 kg/sqm complete all as specified and as directed. Note : Board of office shall be convayed by accepting officer to check the actual weight of chain link fencing on intimination given by Engineer-in-Charge after bringing material at site by contractor.

Fixing only chain link fencing including line wire any mesh, size and type to standards, rails, straining bolts etc including provision of binding wire complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate) as in surface channels and drains etc complete all as specified and as directed.

Dismantling galvanised 2 strand, steel barbed wire in fencing complete all as specified and as directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

Supply and fix galvanised punched type concertina coil of loop dia 450 mm (dia of coil when unstretched) fixed to existing angle post strut and tying at three places ie two bottom & one at top with 3.15 mm dia galvanised mild steel wire complete all as specified and as directed.

Restraining and resecuring including making good staples etc of galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm barbs at 75mm spacing fixed to any type of standered rail, straining bolt etc complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base, sub floor and paving etc complete all as specified and as directed.

M&L for chequred Cement concrete 30cm x 30cm x 25mm thick with grey cement and pigment, set jointed and pointed in neat cement slurry in floors, laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block with grey cement and pigments any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade complete all as specified and as directed.

M&L non skid coloured cermic ENDURA tiles exc 0.06 Sqm but n. exc. 0.11 Sqm 10 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for 75mm thick cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in sub base, sub floor floor and paving finished the surface even and fair without using extra cement complete all as specified and as directed.

M&L for preparing new steel surface of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for welded steel wire fabric supplied and fixed to wood or steel members weight n exc 4kg/Sqm complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm as in soft/loose soil complete all as specified and as directed.

M&L for mild steel round bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) as in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sqcm, with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

Returning, filling in, soft/loose soil including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.

Removing excavated material to distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

mh enterprises

B S ENTERPRISES

VASUNDHARA AND COMPANY

MISHRA CONSTRUCTIONS

Ms Kamal Kant Agarwal

M/S CHAUDHARY CONSTRUCTION

M/s Hoti Lal Contractor