Annual Maintenance Contract for Staff quarters including Civil, Carpentry, Sanitary etc. and Operation and Maintenance of waste water filtration units (2 nos) in staff quarters at CSIR-NIO Colony, Dona Paula, Goa.

Amount

Repairs to plaster in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources

Providing & appying white cement

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge

Earth work in excavation by mechanical means (hydraulicexcavator)/manual means over areas (exceeding 30 cm in depth,1.5m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

All kinds of soil

Hard rock (blasting prohibited)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift

Providing and fixing NICKEL chrome plated copper alloy Fancy Pillar Cock rocket type Jaquar make or equivalent. Confirming to IS 8931;1993. 15mm nominal bore

Providing and fixing brass stop cock (heavy) of approved quality 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser

Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge

Providing and fixing CP brass waste coupling heavy(Make:-Nirali/ARK)

Finishing walls with Acrylic Smooth exterior paint of required shade.

Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and fixing PTMT grating of approved quality and colour.Circular type 100 mm nominal dia

Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door. 110 mm dia

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing C.P.brass shower rose with 15 or 20 mm.Inlet:100 mm dia

Providing and fixing CP brass push cock for urinal of approved make including fittings.(Make:-ARK/Omco/Crabtree)

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.

15 mm nominal bore with 30cm length

15 mm nominal bore with 45 cm length

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe

32 mm dia

40 mm dia

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality. LD-2.5

Rectangular shape 600x450 mm internal dimensions

Square shape 450 mm internal dimensions

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-40(blue)/(white)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required

Kitchen sink without drain board 610x460 mm bowl depth 200 mm

Kitchen sink with drain board 510x1040 mm bowl depth 200 mm

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing & fixing a pair of white viresous china foot rests of standard pattern for squatting pan water closet :250×130×30 mm.

Cleaning and removing blockage of wash basin/sink and its pipeline

Cleaning and removing blockage of bathroom/kitchen traps and its pipeline

Cleaning and removing blockage of manholes/inspection chambers and its pipeline etc.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood

Providing and fixing panelled glazed or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws,excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge(Noe:-Butt hinges and necessary screws shall be paid separately) :Second class teak wood 35 mm thick shutters.

Providing & fixing teak wood veneer sheet for glazed door shutters with fevicol & fixtures

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete

125×70×4 mm (ordinary type)

100×70×4 mm (ordinary type)

75×40×2.5 mm (ordinary type)

Providing and fixing bright finished brass door latch with necessary screws etc complete:250x16x5 mm

Providing and fixing bright finished brass tower bolts (barrel type) with screws etc.complete.

Providing and fixing bright finished brass handles with necessary screws etc complete:125 mm

Providing and fixing bright finished brass door latch with necessary screws etc complete

Providing and fixing anodised aluminium hooks and eyes.

Providing and fixing Aluminium curtain rod having wall thickness of 1mm to 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 25 mm dia

Providing & fixing bright finished brass night latch of approved quality including necessary screws etc.complete

Providing & fixing bright finished brass 100mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc.complete.

Providing and fixing door viewer in main door

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors,windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Float glass panels 4 mm thick glass panel (weight not less than 10 Kg per sqm)

Repairing of old window shutter of any size without fittings

Providing water proofing treatment over the prepared surface with two or more coats with Smart Care damp proof cource of Asian Paint as per the recommendation of manufactures including all taxes, labour & transport complete.

Repairing of old door shutters of any size without fittings

Repairing of night latch

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Painting with synthetic enamel paint of aproved brand and manufacture of required colour to give an even shade:One or more coats on old work.

Polishing on wood work with ready made Wax polish of approved brand and manufacture: Old work

Providing & fixing mosquito nets netlon or equivalent make over the window frame including fixing Velcro tape in the wooden frame and net with screws / nails etc

Labour charges for engaging on daily wage

a) Coolie

b) Fitter (grade 1)

c) Carpenter 1st class

d) Mason 1st class

e) Painter

Miscellaneous Work

Demolishing RCC work manually/by mechanical means including stacking of steel bars & disposal of unserviceable material within 50mts. Lead as per direction of Engineer-in-charge.

Repairing (Removing & re-fixing) of bib cock/pillar cock with replacing of washer to arrest the leakage.

Repairing of flush tank with replacing minor fittings & fixtures to arrest the leakage.

Providing & fixing solid plastic seat with lid for pedestal type WC pan complete:White solid plastic seat with lid

Providing & fixing Stainless Steel towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality. 600mm long towel rail with width of 70mm to 78mm

Providing & fixing GI pipe complete with GI fittings and clamps including cutting & making good the wall etc. Internal work - Exposed on wall

15mm dia nominal bore

20mm nominal bore

25mm nominal bore

32 mm nominal bore

40 mm nominal bore

50 mm nominal bore

Providing & fixing GI pipe complete with GI fittings including trenches & re-filling etc. external work

a) 15mm nominal bore

b) 20mm nominal bore

c) 25mm nominal bore

d) 40mm nominal bore

e) 50mm nominal bore

f) 80mm nominal bore

Providing and fixing C.P.brass bib cock of approved quality confirming to IS:8931:15 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc.,removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.

Providing & fixing gun metal gate valve with C.I.wheel of approved quality screwed end

15mm nominal bore

20mm nominal bore

25mm nominal bore

32mm nominal bore

40mm nominal bore

50mm nominal bore

65mm nominal bore

80mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

15mm nominal bore

20mm nominal bore

25mm nominal bore

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing /fixing gun metal full way value

100mm nominal bore

75mm nominal bore

Providing & fixing normal gauge polythene pipes of approved quality complete with special flange compression type fitting (of approved make) including trenching and refilling etc.(external work)(high density)

25mm nominal bore

32mm nominal bore

40mm nominal bore

50mm nominal bore

Providing and fixing Sintex tank covers with CP brass screws to watertank complete

Providing and placing on terrace roof of floor two polythene loft watertank having ISI mark 450litres. The rate includes making necessary holes for inlet, outlet & over flow pipes. (make:- sintex/shakti)

Providing and placing on terrace roof of floor two polythene watertank having ISI mark 500litres. The rate includes making necessary holes for inlet, outlet & over flow pipes. (make:- sintex/shakti)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing first class marine ply with one coat primer & two coats of oil paint etc.complete

6mm thick

12mm thick

16mm thick

18mm thick

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc.complete : 2nd class teak wood 50x12 mm

Providing and laying gang saw cut 18 mm thick, mirror polished premoulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of area less than 0.50 sqm.

12 mm cement plaster 1:4 (1 cement:4 fine sand)

6 mm cement plaster to ceiling 1:3 (1 cement:3 fine sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement:5 coarse sand) and top layer 6mm thick with cement plaster 1:3 (1cement :3 coarse sand) finished with sponge

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

RCC Repairs:Surface preperation :All delaminated concrete should be chipped. The chipping should be done to a depth of 25 mm behind the reinforcement and shall continue along the lenth of the reinforcedment till an un coroded area is reached . The exposed reinforcement shall be throughly cleaned to remove the corrosion scales either by sand blasting or by emery cloth. The cost is inclusive of material,labour ,necessaray tools etc.complete.

Applicatiomn of anti corrosive primer:Providing & applying 2 coats of a two component zinc rich anti corrosive primer Nitozinc Primer of Fosroc Chemicals (india) Pvt.Limited, contaning at least 90% of zinc and giving a dry film thickness of at least 40micron to the reinfprcement bars .THE primer should be applied according to the manufacturer instruction and as per direction of tghe enginner incharge. Special care should be taken to apply NITO ZINC PRIMER behind the bars.The cost is inclusive of materials scaffloding ,labour ,Painting brush etc complete.

Application of Polymer based primer coating for the old concrete surfaces prior to plastering /concreting:Providing & applying one primer coat of Nitobond SBR of Fosroc Chemicals(India)Pvt.Limited mixed in the ratio of 1:1:3(SBR:Water:Cement)Nitobond SBR and water shallbe mixed the cement to the brushable consistent for the bonding purpose. The cost is inclusive of materials,Labour,and necessaray tools etc .complete.

Application of Polymer based CM Plastering on primed surface:Providing and applying 18 mm thick polymer modified 1:4CM Plaster using Nitobond SBRof Fosroc Chemicals?(India)Pvt.Limited mixed in the ratio of 1:5(SBR:Water).The plastering is to be carried out in two layers of 12 mm and 6 mm respectively.Necessaray key to be provided on masonary surface prior to plastering . The entire syste m is to be cured in accordance to the manufacturers specification&Engineer in charge . The cost is inclusive of material s,labour Necessaray tools etc ,complete.

Crack filler for plasters, IPS, cement sand screeds and non – structural cracks. Do Not open the cracks, Clean the cracks so as to free them from oil, dust, loose particles etc. Moisten the surface with water, Fill cracks with EPCO – ACR using spatula or a putty knife. While applying avoid formation of cavity or bubbles. After filling , allow the surface to dry for at least 24 hours. Apply in layers at 24 hours interval. If the depth of the crack is more than 10mm. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalen.

Providing and fixing to existing door frames. 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames

Providing & fixing plastic ball to floating ball valve

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with two sliding shutters using 18 mm series shutters section.

Acrylic sheet

Plain glass

Laterite masonary in neatly dressed stones for 23 cms th.masonary walls in c.m.1:4(1 cement:4 coarse sand in foundation upto plinth level

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing & fixing 150mm bright finished brass floor door stopper with rubber cushion screws etc.to suit shuuter th.complete

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

15 mm nominal outer dia.pipes

20 mm nominal outer dia.pipes

25 mm nominal outer dia.pipes

Providing 25 mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the engineer-in-charge

Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.

Supplying & fixing C.I.cover without frame for manhole:445×610 mm rectangular C.I.cover(light duty)wt.not less than 23 Kg.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I.cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Providing and fixing rigid PVC pipe 4kg/cm2 including fittings complete socketed

Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door :

100 mm dia

75 mm dia

Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete, without door:

110 mm dia

75 mm dia

Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating.etc.complete,with door:

110 mm dia

75 mm dia

Providing and fixing single "Y"of rigid PVC (approved make) for S.W.R.pipes including lubricating etc.complete,without door:

110 mm dia

75 mm dia

Providing and fixing single "Y"of rigid PVC (approved make) for S.W.R.pipes including lubricating etc.complete,with door.

110 mm dia

75 mm dia

Providing and fixing double "Y"of rigid PVC (approved make) for S.W.R.pipes including lubricating etc.complete,without door:

110 mm dia

75 mm dia

Providing and fixing double "Y"of rigid PVC (approved make) for S.W.R.pipes including lubricating etc.complete,with door:

110 mm dia

75 mm dia

Dismantling G.I. or asbestos rain water pipes with fittings and clamps including stacking the material within 50 mts. lead.

Dismantling of existing G.I pipe including disposal of unserviceable material and stacking of serviceable materials .Upto 20 mm nominal bore.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. SCH-40(blue)/(white)

15 mm dia.

20 mm dia.

25 mm dia.

32 mm dia.

40 mm dia.

50 mm dia.

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:Treatment of soil under existing floors using chemical emul-sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Maintenance and operation of filtration units located behind the tennis court and behind the hostel in NIO colony,Dona Paula. Approximate discharges is 50 to 70 Cum/day, including providing and supplying and additing the chemicals such as Alum,lime, chlorine etc. as per the concentration of BOD and COD of raw waste and treated waste as per the guidelines.

Cleaning and removing sludge and sewage water including adjacent chambers of septic tank behind the tennis court and behind hostel in NIO colony and behind CSIR-Science centre guest house. (Note:-Total 3 septic tanks to be cleaned half yearly)

M/s PNR Constructions