Stabilization and Extension of Ridge near Gaiety Theatre to Padam Dev Complex. Under Smart City Shimla SH Providing 1 No. 13 Passenger Glass elevator Therein

Supply, installation, testing and commissioning of 1No 13 Passenger Lift/ 884 Kgs (MRL-1MPS). The rates include the cost of minor civil works and steel items required for installation of lifts complete in all respect to the entire satisfaction of engineer-in charge.

13 Passenger 884 Kgs,1.0 Mps (min.) lift having 4 stop and 4 opening all on same side, Machine room less, having approximate travel 15 meters as per detailed technical specifications given below.

Type & Capacity 13 Passenger 884Kgs.

Speed 1.00 Meter Per Second (Minimum)

Type of Drive Micro Processor Based VVVF/ REGENERATIVE DRIVE - Closed Loop

Motor / Machine Electric traction gearless motor to be hoisted on guide rails within the elevator hoist way.

Travel Approximate 15 Meters

Serving 4 stops, 4 openings

(All on same side )

Hoist way Available2050 mm wide x 2250 mm deep.

Car size 1200 mm W x 1800 mm D

Car Enclosure stainless steel framed Glass Cabin FD120 with I.S :3614: 2021.

Car & hoist way Door Glass - Ss Enveloped Fire Rated FD120 with I.S : 3614: 2021.

Car entrance & Hoist way entrance Center opening slinding doors 800 mm wide 2100 mm high with provision of emergency key opening at all landings.

Door Operation Linear Door Drive System

Operation A.C. variable voltage variable frequency.

Power Supply 415Volts + 10%, 3Phase ,50 Hz AC.

Over Head available 4200 mm

Flooring Granite 2 mm recess Flooring

PIT available 1400 mm Deep

Leveling Accuracy +/- 5mm independent of Load in the car.

Indicator Digital Direction and position indicators in both car and at all landings.

Guide RailsTongue & Groove Guide Rails

Maintenance Free Maintenance / Fortnightly Service for one year

Safety & Buffers. As per I.S.I. Provisions.

Fire Safety The Landing door shall be fire rated (FD 120) as per IS : 3614 :2021.

Signal/ Accessories Press & Speak intercom system among cars & reception.

Luminous hall Braille buttons at all landing and inside the car.

Steel items.

Automatic Rescue Device to automatically bring the Elevators to a landing in case of power or controller failure provided with sealed maintenance free Batteries of suitable rating for 7 operations of ARD in a day with duration of 30 min. The batteries shall be of reputed make (Exide / Amaron / Panasonic).

Load weighing Device with over load by pass feature.

Voice announcement system with music in the car to announce the position of the elevator as the car stops at a floor served by the elevator.

Full height infra red Safety curtain.

Fireman Drive.

Stainless steel panels in false ceiling

LCD/LED/Digital display in car/ Braille button/ PWD friendly.

Car operating Panel with door open/close button.

LED Lighting

Alarm & Emergency light .(Concealed) with re-chargeable battery

Over load Device.

Fireman Switch.

Air fan at Ceiling for air ventilation (16”sweep).

Audio signal in case of emergency stop/ any interruption should be provided in the lift car.

Correction drive

Hall lantern and gong at all landings

Phase failure detection.

Voltage stabilizer for control system.

Additional car gate lock to prevent the car door to be opened hand rail on three side of car from inside the car in case the car is not at floor level.

Installation & Commissioning The job includes installations, testing, commissioning as required to complete the work in all respect including cost of all material , T &P, Carriage & Labour etc.

Civil Work The firm shall provide scaffolding, M.S. joint /Channels, Pit ladders and minor Civil works etc. as required at no extra payment.

The complete lifts including testing, commissioning and safety provisions shall conform to various Indian standard and rules with up-to-date amendments as mentioned below”-

Standard & Rules.1. IS 17900 :2025 (part 1-5), HP Lift Rule -2009, Indian Electricity Rules 1956.

2. IS 3614 : 2021, NBC , HP Lift Act,2007.

General technical specifications As per CPWD specification and relevant IS code.

Make OEM fulfilling the eligibility criteria as specified in CPWD for lift work

Conditions:-

The work shall be carried out according to CPWD/HPPWD General Specifications.

The work shall be completed to the entire satisfaction of the Engineer-in-charge.

The firm will have to follow fair wage clause.

Sub-standard work will not be accepted.

No claim on account of fluctuation in prices due to any reason shall be considered.

The quantity can be increased or decreased as per actual requirement at site.

The conditional tenders shall not be accepted.

No premium will be allowed on M.R. Items, abatement, if any shall be applicable on all items

The contractor has to employ qualified Engineer for the supervision of work at site.

Any error or omission in nomenclature or unit can be corrected at any stage.

The quality of material shall be strictly in accordance with the specification given in DNIT.

All the material shall be inspected by the Engineer-in-charge of work before installation at site.

All the cable/ wire connections should be done through lugs / thimbles duly crimped with proper crimping tools & no extra payment shall be made on this account.

The department reserves the right to issue any amendment to the work order as emergency demands or allow of altogether cancel the contract without assigning any reason. The department reserves the right to delete / add any item.

Discount offered by the firm should also be considered in deviation of items.

The extra/substitute items will not be allowed against this work without the prior approval of competent authority.

Security shall be deducted on each running/ Final bill of the firm.

The firm shall be quote the rates inclusive all the taxes/ GST whatever required and no extra payment shall be made in this respect.

The fittings/ material shall be inspected by the concerned Engineer-in-charge with the representative of the firm and necessary certificate shall be signed by the representative of the firm for its genuineness.

Any deviations to the clauses in the tender specifications must be clearly and separately indicated otherwise it shall be presumed that the offer is in line with requirements of tender.