8291 CONSTRUCTION OF POL STORE AT RAMESWARAM AND SPECIAL REPAIRS TO CERTAIN BER ITEMS AT PARUNDU UNDER GE TIRUNELVELI

Amount

GENERAL SUMMARY Note:- Schedule'A' Part-I to II are prepriced by MES under Ser No. 2.00 to 3.00. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only

Lumpsum price worked out by the contractor for "BUILDINGS / STRUCTURES" as listed in Schedule 'A' Part-I, on serial page No.20

Lumpsum price worked out by the contractor for "E/M WORKS" as listed in Schedule 'A' Part-II, on serial page No.21

SCHEDULE 'A' PART-III (MISCELLANEOUS ITEMS- To be quoted by Contractor)

Material and labour for Point wiring complete with FRLSH PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including stove enameled steel conduit 20mm dia (ISI marked) and accessories, concealed in wall including breaking of wall and making good wall / surface of ceiling with sunken type pressed steel / welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of FRLSH PVC insulated unsheathed 1.5 Sqmm FRLSH multistranded with copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for the following:

(a) One light point controlled by one, one-way switch

Supply and fix LED light fitting 2x16 watt flame proof , CMRI certified, recommended for gas/vapour group of IIA & IIIB , Zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixtures, driver, holders, connectors etc. complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed.

Supply and fixing Flameproof switch rotary type with termination box in LM6, 16 A, single pole 240V, IP 67 protection complete as per specified and directed.

Supply and fixing Flameproof junction box 100x100x80mm complete as per specified and directed.

Supply and fix sheet metal enclosure powder coated double door for Distribution Board, TPN 4 way DB ,415 V with detachable gland plate, Box insertion marks, circuit identification label, neutral link, earth link, tin plated copper bus bar complete all as specified and as directed.

Supply and fix MCB TPN 16 A to 32 A ,415 V B curve, 10 kA in DB , complete all as specified and as directed.

Supply and fix MCB SP 6 A to 32 A ,415 V B curve, 10 kA in DB , complete all as specified and as directed.

Material and labour sub main wiring with two single core 1100 V grade conforming to IS 694 PVC insulated unsheathed cables 2.5 Sq mm FRLSH multi stranded copper conductor drawn through and incl 20 mm dia stove enamelled steel conduit and conduit accessories concealed with an earth wire of one run 2.5 sqmm FRLSH copper wire earth continuity conductor etc complete all as specified and directed by Engr-in-Charge. Note : Three runs of 2.5 sqmm cable with one run of stove enamelled steel conduit shall be measured as one run.

Supply and fix LED light fitting 1x20 watt ,220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed.

Supply and fixing LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fix new GI bracket made out of 32 mm dia GI pipe length 1.2 mtr long bent to an angle 135 degree including two coats of aluminium paint over a coat of zinc chromate primer along with clamps, bolts, nuts etc including removing old unserviceable GI bracket complete all as specified and as directed.

Material and labour for 50mm bore `light grade` galvanised tubes with all fitting, laid in floor/fixed in wall for cable protection complete all as specified and as directed by the Engineer-in-Charge

Material and labour for earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to 4mm dia GI earth wire as earthing lead by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No.3 connected to earthing test point, including 20 mm GI pipe (Medium grade) for watering and 40 mm GI pipe (Medium grade) for protection of earth strip and etc.. including testing on completion ,PCC chambers as shown in electrical plate No.3 in SSR 2009 Part I Specification, in PCC1:3:6 type C1, RCC M25 type cover slab as shown in electrical plate No.3 in SSR 2009 Part I Specification 30mm thick with 6 mm dia TMT HCR/CRS steel bars at 140mm C/C both way and lifting handle GI funnel & wire mesh ,funnel, lugs and charcoal, salt etc all as applicable complete all as specified and as directed by the Engineer-in-Charge

Supply and lay earth continuity conductor or main earthing lead fixed to wall on batten or recess or buried in ground or drawn in conduit / conduit pipe or fixed to poles or any other indicated situation for loop earthing etc of 4mm dia GI earth wire complete all as specified and as directed.

Material and labour for ceiling rose, surface Bakelite, 65x50mm, two to three terminals, complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing RCBOs 16 A for earth leakage , overload and short circuit protection complete all as specified and as directed by the Engineer-in-Charge

Spreading of riddled earth obtained from trenches for cable cushioning on top and bottom of cable complete all as specified and directed. Note:- (1. Quoted rate shall be deemed to be inclusive of sieving and seperating riddled soil from compost particles and making fine riddled sand bed. 2. Punned thickness only will be measured for payment)

Supply , installation, testing and commissioning of split Air Conditioner of 1.50 TR Capacity with indoor and outdoor units (copper condenser coil, copper cooling coil and evaporator including required length of copper tubing and cables for connecting indoor and out door units) complete with cordless remote control unit, with BEE 5 star rating, with minimum 10 yrs warranty on inverter compressor, year of manufacturing 2023 complete all as specified and as directed. Note : Rate quoted is inclusive of the following (i) Drilling hole on the brick wall to facilitate routing of copper pipe drain pipe and cable from indoor unit to outdoor unit (ii) Sealing the hole from outside, after installation, with white cement (iii) Carrying out Pressure testing, cooling performance check and product demonstration (iv) 4 Core cable of any required length for connecting indoor and outdoor unit (v) Material and labour for fixing Remote stand in wall.

Supply , installation, testing and commissioning of split Air Conditioner of 2 TR Capacity with indoor and outdoor units in replacement (copper condenser coil, copper cooling coil and evaporator including required length of copper tubing and cables for connecting indoor and out door units) complete with cordless remote control unit, with BEE 5 star rating, with minimum 10 yrs warranty on inverter compressor, year of manufacturing 2023 complete all as specified and as directed. Note : Rate quoted is inclusive of the following (i) Drilling hole on the brick wall to facilitate routing of copper pipe drain pipe and cable from indoor unit to outdoor unit (ii) Sealing the hole from outside, after installation, with white cement (iii) Carrying out Pressure testing, cooling performance check and product demonstration (iv) 4 Core cable of any required length for connecting indoor and outdoor unit (v) Material and labour for fixing Remote stand in wall.

Supply and fix in replacement Sheet metal enclosures with socket plug top and MCB SPN 20A, 240 volts, with a two pin and earth plug socket complete with double pole MCB 20 Amps, 240 volts (for AC ) including making good disturbed surface and taking down old unserviceable old unserviceable Sheet metal enclosures with socket plug top complete all as specified and directed.

Supply and fixing PVC Drain pipe with insulation from indoor unit (at any floor) to ground floor level and is to be fixed with necessary clamps complete all as specified and directed.

Supply and fixing of GI powder coated brackets in replacement , for fixing of split AC's including grouting with suitable size fasteners complete all as specified and directed.

Supply and fixing Copper pipe 1/2" dia with foam insulation including connecting complete all as specified and directed.

Supply and fixing Copper pipe 1/4 " mm dia with foam insulation including connecting complete all as specified and directed.

Supply and fix in replacement Double Door Refrigerator, 3 star , electric driven (single phase), with inverter compressor, Capacity 340 Litres with 10 years compressor warranty, frost free complete all as specified and as directed.

Supply, installation, commissioning of Water cooler in replacement with complete body stainless steel, food grade with two taps (one gives plain water and other gives cold water at 40 Ltrs per hour, electric driven, single phase, having storage as 80 Ltrs and nominal cooling capacity as 40 Ltrs/hr complete all as specified and as directed..

Supply, installation, commissioning of Glass Top Deep Freezer, 320 Ltrs, single phase 240 volt, 50 Hz complete all as specified and as directed..

Taking out the Old Air Conditioners, Water cooler , Refrigerator, Deep freezer of any capacity and shifting to MES Store complete all as specified and as directed..

Excavation in post holes (or similar holes) each n exc 0.5 cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in soft soil complete all as specified and directed.

Material and labour for Hardcore of guage n. Exc 63 mm, deposited, spread and levelled in layers n. exc 15 cm thick, watered and rammed to a true surface of a broken stone or boulders complete all as specified and directed.

Material and labour Plain cement concrete type B-2 (1:2:4), 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.

Material and labour for providing cement concrete in foundations, including rafts, footings, foundation beams; plinth beams ; bases for columns 1:2:4 type B-1 (using 20mm graded aggregate) etc complete all as specified and directed.

Material and labour for Brickwork with Sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Material and labour for rendering 15mm thick on fair faces of concrete surfaces in CM 1 : 4 finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for new or previously untreated surfaces of any description and applying two coats of cement based paint over a coat of primer on wall/roof complete all as specified and directed.

Supply and fixing Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats with Fe 410-W(Gde E-250) quality A complete all as specified and directed.

Supply and fixing rolled sections as in main and cross beam, hip and jack after purlins were connected to common rafter and running rails and guides for sliding door fixed with angle cleats and connecting plates etc conforming to Fe 410-W (Gde-E-250) complete all as specified and directed

Supply and fixing Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pin hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed

Mild steel screw bolts 16mm to 20mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 5 to 10cm long complete all as specified and directed.

Supply and fixing Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with Fe 410-W (GdeE-250) quality A complete all as specified and as directed.

Material and labour preparation of new or previously untreated steel surfaces over 10 cm in width of girth and applying two coat on synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

PHEJAYS AGENCIES