WBPWD/SEHEC/SKHED/NIQ30/19-20

Amount

Supply & Delivery of XLPE/PVC insulated. PVC sheathed, steel Armoured Al. conductor Cable of the following size, and conforming to IS: 7098(Part-I):1988/1554(Part-I):1988/ 5831:1984/ 3961(Part-I):1967/ 3975:1970/ 10810:1984/ 3975:1970 /8130:1984/ 3961:1967/10418:1982/ 10810:1984 as amended upto date, in respect of component materials and tests, and as per the approved makes list attached herewith: [Nicco / Gloster/Polycab/Havells/RR Kabel/Crystal]

4 Core 400 Sq.mm

4 Core 300 Sq.mm

4 Core 240 Sq.mm

4 Core 185 Sq.mm

4 Core 150 Sq.mm

4 Core 70 Sq.mm

4 Core 50 Sq.mm

Laying of one cable of the following sizes through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand

4 Core 400 Sq.mm

4 Core 300 Sq.mm

4 Core 240 Sq.mm

4 Core 185 Sq.mm

4 Core 150 Sq.mm

4 Core 70 Sq.mm

4 Core 50 Sq.mm

Laying only Cable above 50 sqmm but not exceeding 400sqmm through existing U PVC/RCC/ Hume/GI Pipe/open masonary trench for single, 2, 3, 3½ and 4 core

4 Core 300 Sq.mm

4 Core 240 Sq.mm

4 Core 185 Sq.mm

4 Core 150 Sq.mm

4 Core 70 Sq.mm

4 Core 50 Sq.mm

Laying of cable as below, on existing Cable Tray/Bracket including S & F MS clamps if required as to GS

4 Core 300 Sq.mm

4 Core 240 Sq.mm

4 Core 185 Sq.mm

4 Core 150 Sq.mm

4 Core 70 Sq.mm

4 Core 50 Sq.mm

Laying of one No. cable of the following sizes in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed

4 Core 240 Sq.mm

4 Core 50 Sq.mm

Laying of cable of size 4 Core 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below:

4 Core 400 Sq.mm

4 Core 300 Sq.mm

4 Core 240 Sq.mm

4 Core 185 Sq.mm

4 Core 150 Sq.mm

4 Core 70 Sq.mm

4 Core 50 Sq.mm

3.5 Core 240 Sq.mm

3.5 Core 185 Sq.mm

3.5 Core 150 Sq.mm

3.5 Core 70 Sq.mm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

4 Core 400 Sq.mm

4 Core 300 Sq.mm

4 Core 240 Sq.mm

4 Core 185 Sq.mm

4 Core 150 Sq.mm

Straigh through Jointing of cable of different size by compound jointing kit including S&F ferrul, tapes and jointing materials (Brand approved by EIC)

3.5 & 4 Core 400 Sq.mm

3.5 & 4 Core 300 Sq.mm

3.5 & 4 Core 240 Sq.mm

3.5& 4 Core 185 Sq.mm

3.5 & 4 Core 150 Sq.mm

3.5 & 4 Core 95 Sq.mm

3.5 & 4 Core 70 Sq.mm

3.5& 4 Core 50 Sq.mm

3.5& 4 Core 25-35 Sq.mm

Supply & Drawing of 1.1 KV grade 185 Sq.mm PVC insulated unarmoured multistrand single core flexible copper cable with necessary reinforment flexible PVC pipe with PVC gland for making connection between main swotch and Panel. [Nicco / Gloster/Polycab/Havells/RR Kabel/Crystal]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:

By ISI-Medium GI pipe

Connecting the equipments body to earth busbar including S &F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

1. The Agency must procure the materials from the manufacturer / OEM or from their authorized. sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. 2. Documents that authenticates such procurement form the manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the manufacturer /OEM / authorized sales channel to the e-mail of Engineer-in-charge and hard copy of it to be submitted during execution of work/submission of bill. 3. If any refurbished material is supplied and installed, penal action will be taken as per existing rules.

Defect Liability period 1 (One) Year

(Rates should be Quoted inclusive of all taxes & duities and L.W.C. @ 1% as applicable)

GHOSH ELECTRIC WORKS

PARTHA SARKAR

CHAKRABORTY ENTERPRISE

OVERSEAS TRADING AND SUPPLIES CORPORATION

COSMOS CONSTRUCTION