For Execution of work namely Conservation and Upgradation of public amenities at Kashmiri Gate Complex

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge (In cement mortar).

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m (All kinds of soil).

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge : Nominal concrete 1:3:6 or richer mix (including equivalent design mix).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources).

Coursed rubble stone masonry with hammer dressed matching with the adjacent structure in lime mortar 1:1:1 (1 Lime : 1 Surkhi : 1 C.Sand) with adhesive materials such as belgiri, gur, gum including cleaning, curing & carriage of water & materials with in a lead upto 100mtr approx.

Random rubble stone masonry with hard stone in lime mortar in 1:1:1 (1 lime : 1 surkhi : 1 c.sand) mixed with binding materials such as belgiri, gur, gum including cleaning, curing & carriage of water & materials with in a lead upto 100mtr approx.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand).

Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like : Cement mortar 1:6 (1 cement : 6 coarse sand).

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand).

Providing and laying 20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand).

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete : Size of Tile 600x600 mm.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers.

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and Laying lime concrete with brick agg 20 to 25 mm gauge nominal size & 50% lime mortar 1:1:1 (1 lime : 1 Surkhi : 1 C. Sand) including ramming, beating & top finishing etc complete including carriage of water & materials with in a lead upto 50 mtr approx.

Providing of Lakhori Brick Masonry with Lime Surkhi Mortar 1:1:1 (1 lime : 1 surkhi : 1 C. Sand) with adhesive materials such as Gur, Belgiri, Gum & San in super structure including carriage of water & materials with in a lead upto 100 mtr approx.

Provision for Recessed Pointing the Open Joints of Lakhori Brick Masonry in Lime Surkhi Mortar in 1:1:1 (1 Lime : 1 Surkhi : 1 Coarse Sand) mixed with adhesive materials such as belgiri, gur, gum & san with racking, cleaning & washing the joints including carriage of water & material with in a lead upto 100M approx.

Providing & fixing of D.Q Stone pitching in place of missing stone over 20 mm (avg.) thick base of Lime Mortar 1:1:1 (1 Lime : 1 Surkhi : 1 Coarse Sand) with an admixture of colouring pigment with binding materials including carriage of water & materials with in a lead upto 100 mtr approx.

Provision for Recessed Pointing the Open Joints of R.R. & C.R. Stone Masonry in Lime Surkhi Mortar 1:1:1 (1 Lime : 1 Surkhi : 1 Coarse Sand) mixed with adhesive materials such as belgiri, gur, gum & san with racking, cleaning & washing the joints including carriage of water & material with in a lead upto 100M approx.

Providing & Fixing 75 MM thick Red Sand Stone flooring over 20 MM thick bed with fine dressed on all exposed surface & fixed in position in lime surkhi mortar 1:1:1 (1 Lime : 1 Surkhi : 1 C.Sand) mixed with adhesive materials such as belgiri, gur, gum etc. including carriage of water & material with in a lead upto 50 M appx.

Providing & Fixing 50 MM thick Red Sand Stone flooring over 20 MM thick bed with fine dressed on all exposed surface & fixed in position in lime surkhi mortar 1:1:1 (1 Lime : 1 Surkhi : 1 C.Sand) mixed with adhesive materials such as belgiri, gur, gum etc. including carriage of water & material with in a lead upto 50 M appx.

Provision for providing and making lime slacking and mortar pit by means to pit excavation, brick masonry and plastering over it. The size of the over all pit is 8.00x3.00m and depth 0.90m including pit divided into three parts and cement plastered complete.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Providing 40 to 50 MM Thick Semi-Moulded lime plaster in lime Surkhi mortar 1:1:1 (1 lime : 1 surkhi : 1 coarse sand) mixed with adhesive materials such as Gur, Belgiri, Gum & San including carriage of water & materials with in a lead upto 100m appx.

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge.

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.

Providing and fixing wooden door with salwood for cell and store including of flowers, iron nails with necessary fitting and fixture etc. complete.

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer in-charge and as per manufacturer’s specification, with all 4 sides tapered and backed by acoustical tissue with NRC value not less than 0.60.

Repairing of wooden doors such as replacement of hings damaged wooden strips and locking arrangement etc. complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (Hot finished welded type tubes).

Providing and fixing salwood ventilator with aluminium jalie including all fittings and fixtures etc. complete.

Providing and fixing puff panel roofing sheet 6mm thick for toilet block and CA office including all fittings and fixtures etc. complete.

Provision for purchase of electric articles which are required for C.A. office & toilet block etc. complete. Molder switch & socket with box 15amp ISI mark

Wire bundle 4 sqmm copper ISI mark

Wire bundle 2.5 sqmm copper ISI mark

Service line 10sqmm 200 feet long in aluminum ISI mark 2 core for power supply

Switch 5amp ISI mark

Socket 5amp ISI mark

PVC holder ISI mark

CFL tube 20 watt ISI mark

Panel box (6 way) havells 8''x8''

MCB 32amp ISI mark

Switch board 8''x10''

PVC tap roll

PVC batton 10' long 1'' dia

Exhaust fan ISI 12''

Mirror (1.50x0.80) fixed in toilet block

CPVC pipe 20mm (For water supply use)

Tap brass stainless steel

Socket 20mm

Elbow 20mm

Tee 20mm

Union 20mm

Fan 48'' for C.A. office

Sintex tank 1000 ltr with triple layer

PVC pipe for drain water 6'' dia

C.I. Jali (1. 750 gms)

Main hall with CI cover (45x45x60)

Cartage of materials from market to site

Provision for purchase of esential articles which are required during the execution of work. Wooden Handle

P.V.C Bucket (15 Ltr)

First Aid Box with Materials

Cane Basket

Pan Mortar (P.V.C)

P.V.C Dram(200 Ltr)

Coir Brush

Wire Brush

P.V.C Mug (Big)

Bamboo Challi (5' x 2')

Safety Helmet PVC ISI Marked

Safety Belt ISI Marked

Green Agro Shade net Clothes 3M wide and 40M length

PVC Gum Boot (7 to 10 Size)

Wooden Ballies (10 ft. length)

Wooden Ladder 15 ft. long

Cartage of Materials from Market to Site

Provision for purchase of sanitary articles which are required for toilet block etc. complete. GI Pipe 1/2" dia (Feet)

Water tank (1000 ltr capacity)

Urinal partition (Hindware or eq.)

Waste Pipe

Connection Pipe

Angle valve

Bib cock (15mm)

Stop cock (15mm)

GI Socket (15mm)

Elbow (15mm)

Tee (15mm)

Nipple (2'' to 4'')

Soot goola & solution

10mm Toughned Glass with beading (Size - 1.50x0.40mm)

Plumber

Helper

Cartage of materials from market to site

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level : Mild steel and Medium Tensile steel bars

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns.

Please Enable Macros to View BoQ information