REPAIRS TO AGE EM OFFICE WATER SUPPLY INSTALLATIONS AND SUBSTATION INCLUDING HOPPER TANK AND OH TANK AREA UNDER AGE BR II OF GE SUKNA

Amount

Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

All as per Sl item No 1 above but exc. 1.5 Sqm but not exc. 4.0 Sqm each

Dismantling unframed timber scantlings 40 Sqcm and over in section, in any position complete all as specified and directed.

M&L brick work with sub class 'B' brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 including demolition complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces / ceiling, racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L 10 mm thick rendering in CM 1:3 on fair faces of brick work or concrete surfaces as in ceiling, chajja, soffits etc, and finished even and smooth without using extra cement complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in CM 1:4 using water proofing compound as per manufacturers instructions finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and directed. Make:- Fosroc chemicals / STP Ltd / M/s Sika India Ltd / Hindcon Chemicals Limited

M&L preparation of newly plastered ceiling surfaces and inlcuding applying three coats of white wash complete all as specified and directed. Make :- Rajasthan / Apple / Surya

M&L preparation of newly plastered wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over two coats of wall care putty (2 to 3 mm thick) to obtain smooth finish complete all as specified and directed. Make of oil bound distemper :- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints

M&L preparation of new plastered wall surfaces and including applying two coats of cement base paint over a coat of primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints / Asian Paints (Gutucam) / Crimocem Super Cement paints

M&L preparation of new plastered wall surfaces and including applying two coats of exterior weather coat paint over a coat of primer and over two coats of wall care putty (2 to 3 mm thick) to obtain smooth finish complete all as specified and directed. Make:- Royal acrylic (crimson paints pvt ltd) / Dulax / shalimar paints ltd (Extra maximum ultra) / Berger paints ltd (weather coat) / Asian paints ltd (Appex ultima) / Jotun India pvt ltd

M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over one coat of wall care putty (min 1.5 mm thick) to obtain smooth finish complete all as specified and directed. Make of oil bound distemper:- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints

M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of weather coat acrylic exterior emulsion paint over a coat of primer and over one coat of wall care putty (min 1.5 mm thick) to obtain smooth finish complete all as specified and directed. Make of weather coat paint:- Royal acrylic (crimson paints pvt ltd) / Dulax / shalimar paints ltd (Extra maximum ultra) / Berger paints ltd (weather coat) / Asian paints ltd (Appex ultima) / Jotun India pvt ltd Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints

M&L preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. Make:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

M&L in repairs 35 mm thick (measured solid) precast cement concrete 1:2:4, type-B-0 (using 12.5mm graded stone aggregate), louvers and jallies, including all mouldings but excluding frame, set in cement Mortar (1:4) complete all as specified and directed.

M&L providing precast cement concrete 1:2:4 Type B1 (using 20 mm graded stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match including necessary formwork or moulds & demolition etc. complete all as specified and as directed.

S&F in repairs galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, complete all as as specified and directed (each line wire to be measured).

All as per Sl item No. 20 above but restraining, resecuring including making good staples etc. of existing barbed wire.

S&F mild steel screw bolts diameter of neck 11 to 15 mm (machine made) with hexoganal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, not exc. 5 cm long complete all as specified and directed.

Supply only chain link MS galvanized fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc, and including provision of binding wire including dismantling complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning filling in and ramming earth in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good in soft/loose soil complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete including demolition complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete, brick work, masonry, etc, and including taking out embedded portion and making good disturbed ground complete all as specified and directed.

M&L for mild steel work in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc,) and including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with grade of steel conforming to Fe - 410 - W (Gde E - 250) Quality - A and complete all as specified and directed.

M&L 60 mm thick machine pressed precast concrete interlocking coloured paver block of any shape and size confirming to IS 15658-2006, M-35 grade, set with grey cement and pigment, laid over and including 25 mm thick sand cushioning complete all as specified and directed. Make :- Anjali tiles / Ultra tiles Pvt Ltd / Terra Firma / Ecco Scope / Mehtab tiles

M&L cement concrete chequered tiles 300 x 300 x 25 mm thick with grey cement with pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors laid over and including 15 mm thick screed bed in CM 1:4 and dismantling complete all as specified and directed. Make : Lovely / Anjali / Bharat Flooring / Hindustan tiles / Mehtab tiles

M&L 75 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base etc, including demolition complete all as specified and directed.

M&L expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members, weight not exc. 4 kg per square metre complete all as specified and directed.

M&L 50 mm thick, PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in floors finished even and smooth without using extra cement including demolition complete all as specified and directed.

S&F non asbestos fibre cement building boards 4 mm thick (designer pattern) fixed or laid / inserted to GI framework with screws in seamless false ceiling (flat or sloping) of grid size 605 x 605 mm and including GI frame work comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with contacting clips across the intermediate channel at 457 mm centre to centre hanging from structural steel / scantling with 6 mm GI wire and including dismantling complete all as specified and directed. Make of boards:- Everest / Lafarge / Armstrong / Visaka Industries Make of GI Grid :- Armstrong / Unifloors / Nittobo

M&L 50 mm thick, PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in floors, paths, plinth protection, hardstanding etc. finished even and smooth without using extra cement and including demolition complete all as specified and directed.

All as per Sl item No. 38 above but 75 mm thick

M&L forming 12 mm thick & 50 mm deep expansion joints in concrete slab filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and directed.

All as per Sl item No. 40 above but 75 mm deep

M&L coloured glazed ceramic tiles 300 x 450 x 7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 & dismantling complete all as specified and directed. Make :- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / NITCO / Orient Bell Ltd

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:4 and dismantling complete all as specified and directed. Make:- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / NITCO / Orient Bell Ltd

M&L 16-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like laid over and including screed bed 15 mm thick in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including demolition complete all as specified and directed.

M&L vitrified paver tiles 8 to 10 mm thick (square / rectangular) area of each tile 0.09 Sqm to 0.16 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:4 and dismantling complete all as specified and directed. Make:- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / NITCO / Orient Bell Ltd

S&F in repairs 40 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf / cm2 and fixed complete to wall, ceiling or in floors etc complete all as specified and directed. Make:- Supreme / Prince / Kisan

S&F in repairs PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Make:- Supreme / Prince / Kisan Mouldings Limited

S&F aluminium anodised powder coated frame work (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates and including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, (thickness of powder coating not less than 50 micron) complete all as specified and directed. Make:- Indal Co / Hindal Co / Jindal / Ajit India

S&F steel window with side hung shutter and including box type hinges steel handle and steel peg stay with glazing bars dovetailed or welded complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri

All as per Sl item No 49 above but without glazing bars

S&F steel ventilator with top hung shutter and including hinges steel peg stay complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri

S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in square n.exc 0.50 sqm in each pane complete all as specified and directed. Make:- Saint Gobain / Modiguard / Asahi India / Triveni Float / IAG / Hindustan Pilkington

All as per Sl item No. 54 above but figured glass, pin head type.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples and including wooden beads complete all as specified and directed.

All as per Sl item No. 56 above but in repairs

S&F 30 mm thick pre-laminated medium density fibre (MDF) board flush door shutter, both side laminated of approved colour, interior grade complete all as specified and directed. Make:- Greenply Industries Ltd. / Balaji Action Buildwell / Novapan / National / Kitply

S&F factory made wire guazed (panel will be wire guazed in lieu of plain PVC sheet) PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top rails, bottom rails stiles & lock rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. The wire gauze shall be wrapped on an additional square 8 mm MS Solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / Sintex / Polywood / Hindopan / Marino

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing (SSR - 2010 Part-II Rates) complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / Sintex / Polywood / Hindopan / Marino

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top rails, bottom rails stiles & lock rail. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / Sintex / Polywood / Hindopan / Marino

S&F 125 mm long aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed. Make:- M/s Bharat / M/s Classic / Alans

All as per Sl item No 62 above but 150 mm.

S&F 100 mm butt hinge, medium weight, cold rolled mild steel complete all as specified and directed. Make:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison

S&F 125 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed. Make: M/s Bharat / M/s Classic / Alans

All as per Sl item No 65 above but 150 mm.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple, bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. Make: M/s Bharat / M/s Classic / Alans

S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. Make:- M/s Bharat / M/s Classic / Alans

S&F 300 mm, ordinary rat tail rod pattern springs and including roller and roller plate complete all as specified and directed.

M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F in repairs pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Prestar.

All as per Sl item No. 71 above but plain steel sheet.

S&F in repairs structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St.-240 complete all as specified and directed.

S&F in repairs 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grams) complete all as specified and directed. Make:- Prayag Cat No. 152 or equivalent in Polytuf

S&F in repairs rotational moulded polyethylene water storage tanks of 500 Litres capacity, multilayered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed. Make of tank:- Sintex / Polycon / Polywell Make of ball valve:- Prayag Cat No. 152 or equivalent in Polytuf

S&F in repairs 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed. Make - Tata / Jindal Steel / Prakash

All as per Sl item No 76 above but 20 mm bore.

S&F in repairs 15 mm bore bib tap chromium plated fancy type, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. Make:- ESSCO, Cat No. - DLX-511KN or equivalent in Prayag / Gem / Parko

S&F in repairs 15 mm bore fancy type, chromium plated, stop valves, concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified and directed. Make:- ESSCO, Cat No. - DLX-514AKN or equivalent in Prayag / Gem / Parko

S&F in repairs pillar tap 15 mm bore, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered “hot" or “cold” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Make:- ESSCO, Cat No. - DLX-507KN or equivalent in Prayag / Gem / Parko

S&F in repairs vitreous china squatting pan, "Orissa pattern" white, size 580 x 440 mm with integral foot rest, 'P' or 'S' trap and excluding connection to trap and to flushing pipe, CI anti -syphonage pipe complete all as specified and directed. Make:- Parryware, Cat No. - C0117 (White) or equivalent in Cera / Hindware / Essco

S&F in repairs vitreous china wash hand basin white flat back of size not less than 550 x 400 mm with and including PVC waste pipe 32 mm bore, waste coupling and cutting for and pinning in ends of brackets etc, complete all as specified and directed. Make of wash hand basin:- Parryware, Cat No. - C0406 *(SP) (White) or equivalent in Cera (1st quality) / Hindware / Essco Make of waste coupling - Prayag / Polytuf. Make of PVC waste pipe - Prayag / Polytuf

S&F in repairs waste fitting 32 mm bore, brass, chromium plated for basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. Make :- Prayag Cat No.- BEA-10 or equivalent in ESSCO / Gem / Parko

S&F in repairs PVC connections 15 mm size with PTMT nuts, of length 450 mm complete all as specified and directed. Make:- Prayag Cat No.- 323-T or equivalent in Polytuf

S&F in repairs vitreous china urinal half stall type, of size not less than 380 x 400 x 590 mm, white including chromium plated urinal spreader complete all as specified and directed. Make:- Parryware, Cat No. - C0583* (Combo set) (white) or equivalent in Cera (1st quality) / Hindware / Essco

S&F in repairs 32 mm bore PVC waste pipe for WHB / Sink etc. complete all as specified and directed. Make:- Prayag Cat No - 327 or equivalent in Polytuf

S&F in repairs PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets & 32 mm dia PVC flush bend pipe complete all as specified and directed. Make of Cistern:- Parryware, Cat No. - E8055 or equivalent in Cera (1st quality) / Hindware / Essco Make of Bend Pipe:- Parryware / Cera (1st quality) / Hindware / Essco

S&F in repairs 20 mm dia curtain rod mild steel with decorative wooden finish complete all as specified and directed.

S&F decorative wooden finished brackets, supports for holding curtain rods or corners to be fixed at ends suitable for curtain rod of 20 mm dia with necessary screws complete all as specified and directed.

M&L for roof treatment in order of precedence as given below complete all as specified and as directed:- (i) Taking out of existing water proofing treatment and including padding, cleaning the surface using wire brush, brooming down and washing down with water to remove dust etc, and brushing with neat cement slurry @ 3.00 kg of cement per Sqm. (ii) 15 mm thick screed bed in CM 1:4 on surface. (iii) Cleaning of plastered surface and applying one coat of bituminous primer @ 0.40 Ltr / Sqm. (Contd...)

(iv) Supply and laying 3 mm (Minimum) thick APP based polymeric membrane of approved manufacturer with weight not less than 3.60 Kg per Sqm, reinforced with non-woven polyester fabric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 30 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (v) Applying one coat of water proofing paint with aluminium finish over APP as per manufacturer's instruction. Note :- (a) Bituminous primer shall be `TANK MASTIC’ manufactured by M/s STP Ltd or “EMUFALTE” manufactured by M/s Texsa India Ltd (b) Laying APP based polymeric membrane shall be done by torch on method as per manufactures instructions. (c) A minimum overlap of 100 mm and 75 mm should be made at the end and sides of the polymeric membrane respectively and all overlaps and joints shall be sealed as per manufacturers instruction. (d) APP based polymeric membrane shall be “SUPER THERMOLAY” manufactured by M/s STP Ltd or “WP Shield” manufactured by M/s Sika India Pvt Ltd or equivalent of M/s Hindcon chemicals limited or M/s Tiki Tar Danosa (India) Pvt Ltd or Shivam Tar product. (e) Water proofing paint shall be "Super Silver Shield" manufactured by M/s STP or equivalent in "M/s Tiki Tar Danosa (India) Pvt. Ltd" or "M/s Sika India Pvt Ltd".

SHRI N.DAS

R N SAH N CO

PS ENTERPRISE

SURESH JHA

Janata Enterprises

DAS AND GHOSH CONSTRUCTION

M/s TALCO