Loading…
Loading…
Tender Value
₹69.2 L
EMD Value
₹1.4 L
Closing Date
28 Aug 2026, 3:00 pm5d left
Executive Engineer WD XXII
WD XXII PWD Fatorda
SITC of sound system for various Temples in 31-Margao Constituency Under MLA-Lad Scheme.(Call no.2)
2026_PWD_31239_1
3/26-27/PWD/WDXXII/MnE/ ASW/TN-19/01 dtd.20.08.2026
Open Tender
Electrical Works
Percentage
365 days
Margao
Please refer Tender Notice TN-19 dtd 20.08.2026
6 documents required · 6 mandatory
₹10,000
Yes
₹1.4 L
Yes
20 Aug 2026
20 Aug 2026
31 Aug 2026
21 Aug 2026
28 Aug 2026
21 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | supply of 2-way, 1000W (Class D) bi-amped powered loudspeaker with a 15-inch woofer and 1.4-inch HF driver, Bass-reflex, 44 Hz - 20 kHz frequency range (-10db), H90゚ x V60゚coverage area, 1.8 kHz: FIR-X tuning™ (linear phase FIR filter) crossover, 131 dB SPL, 15" cone, Voice Coil: 2.5", Magnet: Ferrite, 1.4", Type: 1" throat compression driver, Magnet: Ferrite of make Yamaha Model DHR15 | - | Nos | - | - |
| 2 | supply og STAND FOR SPEAKER- Alluminium speaker stand, with steel locking pin.of Make Ahuja Model STA 150 | - | Nos | - | - |
| 3 | supply of 2-way 700W bi-amp powered loudspeaker, equipped with a 10-inch woofer and a 1.4-inch HF driver, Bass-reflex, 52 Hz - 20 kHz frequency range (-10db), H90゚ x V60゚coverage area, 1.9 kHz: FIR-X tuning™ (linear phase FIR filter) crossover, 128 dB SPL, 10" cone, Voice Coil: 2", Magnet: Ferrite, 1.4", Type: 1" throat compression driver, Magnet: Ferrite of make Yamaha Model DHR 10 | - | Nos | - | - |
| 4 | supply of Wall mount brackets for above speakers with vertical and horizontal movement make custom | - | Nos | - | - |
| 5 | SITC OF MIXER-
12-Channel Mixing Console
Max. 6 Mic / 4 Line Inputs (8 mono + 4 stereo)
4 GROUP Buses + 1 Stereo Bus
4 AUX (incl. FX) power of Make Yamaha Model MG12XU | - | Nos | - | - |
| 6 | supply of Audio Mixer, On board processor: SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off), Phantom power: +48V, Digital I/O: USB Audio Class 2.0 compliant Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit, Mono (Mic/Line): 12, Mono/Stereo (Mic/Line): 4, stereo out: 2, Monitor out: 1, phones: 1, Aux send: 4, Group out: 4, THD: 0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min, Frequency response: +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min, Crosstalk: -78db, of Makr Yamaha Model MG20XU | - | Nos | - | - |
| 7 | supply of WIRED MICROPHONE Type - Dynamic (moving coil)
Frequency Response - 50 to 15, 000 Hz
Polar Pattern - Cardioid Output Impedance - 600 Ω
Sensitivity - at 1 kHz, open circuit voltage -52 dBV/Pa¹ (2.5 mV) of Make Shruve Model SV 200 | - | Nos | - | - |
| 8 | SITC OF Wireless Hand Mic- 2hand mic I reciever. Reciever Type: Dual Channel Non-Diversity, Frequency Response: 40Hz-16kHz, Polar Pattern: Cardioid.of Make Studio master Model XR80HH | - | Nos | - | - |
| 9 | supply of Dual headworn wireless microphones.
Unidirectional pickup pattern.
Comfortable and lightweight design.
Compact single plug and play receiver unit.
Deploy up to 8 sets (16 microphones) at the same time.
External windscreen to reduce wind and pop noise.
Built-in rechargeable batteries in the transmitter (microphones) and receiver unit
Quick charging via standard DC 5V micro-USB cable.
Exceptional vocal clarity.of Make Studio master | - | Nos | - | - |
| 10 | supply of CABLES- XLR TO XLR 15MTRS of custom Make | - | Metre | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.90 MB
Tendernotice_2.pdf
PDF • 0.84 MB
Tendernotice_3.pdf
PDF • 0.82 MB
Tendernotice_4.pdf
PDF • 0.21 MB
BOQ_31636.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].