Supply and erection of Automatic water sprinkler system along the approach road to the weighbridges in mine at Karo OCP BnK Area.

Amount

Providing, laying and fixing following dia G.I.pipe (mediumclass) in ground complete with G.I.fittings including trenching (75cm deep) and re-filling etc as required.100mm dia

Providing and fixing G.I.pipes complete with G.I.fittings including trenching and refilling etc. External work 40 mm dia normal bore

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth,1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and for all lift, as directed by Engineer-in- charge. (All kinds of soil)

Surface dressing of the ground including removing vegetation and in equalities not exceeding15 cm deep and disposal of rubbish, lead upto 50 m and lift up to 1.5 m. (All kinds of soil)

Filling available excavated earth (excluding rock) in trenches, plinth. sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and for all lift

Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layers by ramming, watering etc.,stacking serviceable material for measurement and disposal of unserviceable material as directed, within a lead of 50 m Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia ,

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level : 1:1.5:3 (1cement : 1.5coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete.

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN1.6 with non rising spindle, bronze/ gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS780 of following sizes as required: 100 mm dia

Providing , installation , testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket,GI bolts, nuts, washers etc.as required :100mm dia

Supply and Providing of control cable 2.5sqmm 24 core 1100 volts, ISI mark, Copper

Auto mist valve normally closed pilot operated diaphram type solenoid valve screwed end 100 mm, operating voltage 110V AC

Supply and Porividing of Sensor cable 1.5sqmm , 4 core, screen cable, 24 volt DC, copper, ISI mark

Micro strainer (Body -GI, strainer stainless steel, ISI mark)

Sprinkler gun 360 degree/35-42 mtr throw., type -Impact, Pressure4-7kgf/cm2

Pressure relief valve, 50 mm dia, 6-12 kgf/cm2 adjustable control, brass make

Spray discharge header unit 150mm x 6 mtr. Length GI medium class, ISI mark as per IS-1239

Total impact of GST for the purpose of CTC

SUNRISE ENTERPRISES (BID ID -1134823)