C/o RCC framed structure at Govt. Higher secondary School Building, Basar in Leparada District, Arunachal Pradesh

Amount

Earth work in excavation in foundation trenches not exceeding 1.50 m width or 10 Sq.m. on plan or drains not exceeding 1.50 m in width or 10 Sq.m. on plan including dressing of sides and ramming of bottoms, lift upto 1.50 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. a) Hard soil

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.

Providing and laying in foundations and plinth cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in : a) In foundation & plinth

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in : b) In wall etc

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size) with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete in walls (any thickness) including attached pillasters, buttresses, plinth and string course, fillets etc from top of foundation up to floor two level including finishing and plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring, shuttering and reinforcement M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers bands and facias up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding the 6 mm to give a smooth and even surface but excluding the cost of centering, shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 fine sand : 4 stone aggregate 12.5 mm nominal size).

Reinforced cement concrete work in shelves up to floor two level excluding cost of centering and shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).

Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Centring and shuttering including strutting, propping etc and removal of form work for :

a) Foundation, footings, bases of columns etc. and mass concrete.

b) Walls including attached buttresses, pilasters etc.

c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).

d) Lintels, beams, girders, bressumers and cantilevers etc.

e) Column, pillars, posts and struts etc.

f) Stairs (excluding landings) except spiral stair cases.

g)Vertical and horizontal fins individually or forming box louvers bands and facias.

Reinforcement for RCC work including bending, binding and placing in position complete. b) Mild steel.

Half brick masonry (with best available local bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) in foundation and plinth.

Extra for half brick masonry in superstructure above plinth level and up to floor two level.

Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.

Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position.

Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. , Ornamental Grill

Supplying and fixing factory made panelled shutters made out of best available hard wood for doors including panelling with panels 12 mm thick commercial veneered teak wood particle boards (Phenyle Bonded) 3 layers flat pressed including applying one coat of approved wood primer. a) 40 mm thick including anodized aluminum butt hinges with necessary screws.

Providing and fixing factory made uPVC white colour casement/ casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion extruded profiles duly reinforced with 1.60 +_ 0.20 mm thick galvanised mild steel section made from rool forming process of required length, uPVC extruded glazing beads of approiate dimension, EPDM gasket, stainless steel friction hinges, zinc alloy casement handles, GI fastener 100x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile for frame & sash shall be mitted cut and fushion welded at all corners, mullion if required shall also be fusion welded including drilling of holes for fixing hardware & drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backed rod of required size and of approved quality, all completet as per approved drawing and direction of the Engineer in Charge Casement window doble pannels with SS friction hinges ( 350 x 19 x 1.9 mm) made of (big series) frame 67x 60 mm & sash / mullion 67 x 80 mm both having wall thickness 2.3 +- 02 mm and single glazing bead of approiate dimension.

Providing and fixing factory made uPVC white colour sliding glazed windows upto 1.50 m in height dimension comprising of extruded profile duly reinforced with 1.60 +_ 0.2 mm thick galvanised mild steel section made from roll forming of required length (Safe & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlck, EPBM gasket, wool pile, zinc alloy ( white powder coated) touch lock with hook zinc alloy body with single nylon rolleer ( weight bearing capacity of 40 Kg) , GI fastener 100x 8 mm size for fixing frame to finished wals and necessary stainless steel screws etc. Profile for frame & sash shall be mitted cut and fushion welded at all corners, including drilling of holes for fixing hardware & drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backed rod of required size and of approved quality, all completet as per approved drawing and direction of the Engineer in Charge

Extra for providing heavy sheet float glss panes instead of ordinary float glass in glazed window and clerestory windows shutter ( 5.50 mm thick instead of 4 mm thick)

Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete. a) 300 x 16 mm

Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete. a) 300 x 10 mm

Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete. a) 125 mm

Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone shingle 40 mm nominal size).

Providing & fixing steel roller for uPVC sliding windows and necessary screws etc complete.

Providing and fixing steel (white poeder coated) crescent lock for uPVC sliding window/ door with necessary screws etc complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS: 15622: of approved make in all colours and shade, laid on 20 mm thick cement morter 1:4 ( 1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment etc. complete. b) Size of tiles 1000 x 1000 mm

White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry.

Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with : Udaipur green marble

Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately).

Welding by Electric plant

Providing and fixing in position collapsible steel shutters with vertical channels 20 mm x 10 mm x 2 mm and braced with flat iron diagonals 20 mm x 5 mm size with top and bottom rails of T iron 40 mm x 40 mm x 6 mm with 38 mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint.

Providing Alumunium Troughed Sheet Roofing fixed with 'J' hooks,bolts,nuts, washer with bitumen (the 'J' hook,nut and bolt are as per IS:733 of 1983) and limpet washer filled with white lead complete excluding the cost of the purlins,rafters and trusses. a)Using 0.65 mm thick Alumunium Troughed Sheet

Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. b) 0.63 mm thick GI sheet

Providing and fixing 12 mm thick insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately).

Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling. b) Local soft wood

Extra for making chamfered edges of beading.

Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn 100 mm diameter pipe

Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement: 2 fine sand)

(A) CI Plain bend ,100 mm diameter pipe

(C) CI Plain shoes :, 100 mm diameter pipe

6 mm cement plaster to ceiling 1 : 3 (1 cement : 3 fine sand).

12 mm cement plaster 1 : 6 (1 cement : 6 fine sand).

15 mm cement plaster 1 : 6 (1 cement : 6 fine sand) on the rough side of single or half brick wall.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Wall painting (two or coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.

Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.

Making plinth protection with 2nd class bricks on edge in cement mortar 1 : 6 (1 cement : 6 fine sand) over 7.50 cm bed of dry bricks aggregate 40 mm nominal size rammed consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1 : 2 (1 cement : 2 fine sand).

Providing and fixing 40 mm dia GI Pipe outlet in cement mortar 1 : 3 (1 cement : 3 fine sand) including cutting and making good the wall.

Construction of cement concrete drain 15 cm wide and 15 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering and all exposed surfaces with 12 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) including shuttering complete.

Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.

Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. b) 100 mm dia SW pipes

Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. b) 150 mm dia SW pipes

Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design. a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).

Construction of soak pit 1.2 x 1.1 x 1.2 m filled with brick bats including SW drain pipe 100 mm dia and 1.20 m long complete as per standard design.

Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work). a) 15 mm nominal bore

Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).

b) 40 mm nominal bore

b) 25 mm nominal bore

Providing and fixing Cromium finish bib cock of approved quality of Sona/ Agmeco brand. a)15 mm nominal bore

Providing and fixing Cromium finish stop cock of approved quality of Sona/ Agmeco brand. a) 15 mm nominal bore

Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required. a) Long Pan patten WC Pan

Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required. a) WC pan with white plastic seat and lid.

Providing and fixing white vitreous china wash basin with Pedestral of Hindware make with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required. b) Flat back wash basin size 550x400 mm with single 15 mm Cromium finish Sona/ Agmeco brand pillar taps of heavy quality.

Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers.

Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws.

Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality). 750 x 20 mm size

Providing and fixing Aluminium railing (Heavy duty) with Aluminium tube & Square Bar etc complete with hand rails.

Providing and fixing Aluminium post round/ square shape 100 mm dia (Heavy duty) for Aluminium railing complete with fixing at floor.

Providing and laying 80 mm thick fcatory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc all complete as per the direction of Engineer in Charge

Wiring of light point with 1.50 Sqm PVC insulated Aluminium conduit cable on PVC surface conduit pipes

a) Short Point

b) Medium Point

c) Long Point

Wiring of Fan Point with 1.50 Sqmm PVC insulated PVC shealter Alu. Condt. Cable on PVC conduit pipe. Medium Point

Wiring for 3 Pin 5 Amp. Power Plug point with 1.50 Sqmm PVC insulated PVC sheated Alu. Condr. Cable on PVC surface including providing & fixing of 3 Pin 5 Amp. Socket outlet on the switch board etc as required.

Wiring for 3 Pin 15 Amp. Power Plug point with 2.5 Sqmm PVC insulated PVC sheated Alu. Condr. Cable on PVC surface including providing & fixing of 3 Pin 15 Amp. Socket outlet on the switch board etc as required.

Wiring for circuit including with 2.5 Sqmm insulated PVC Sheated Alu. Conduit cable on PVC surface conduit pipe

Wiring for Sub-Main wiring with 2x4 Sqmm insulated insulated PVC Sheated Alu. Conduit cable on PVC surface conduit pipe

Providing & Fixing of Bulk head fitting with acessories etc including connection etc as required category.

Providing & Fixing of Brass Batten/angle holder including connection etc as required.

Providing & Fixing 15AMP+M Main switch fuse unit wire 250V including drilling holes on the board etc as required.

Providing & Fixing T.W. Board of including painting etc as required

a) size 12"x15"

B) Size 8" x 10"

c) Size 6" x 8"

d) Size 4" x 6"

Providing & Fixing 32A SPQM main switch and unit wire 250V i/c drilling holes on the board etc as required.

Providing & Fixing of 40 AMP Isolotar

Providing & Fixing 6 AMP circuit breakar

Providing & Fixing of 40 mm dia 3.10 mtr. Long G.I. Pipe with 40 mm dia G.I. Socket, 40mm dia G.I. Bend 2 Nos clamps 2 Nos. with 7/124 G.I stay wire etc. as required.

8 SWG G.I wire including connection etc. as required.

Earthing with Copper plate and copper metal, passed through G.I Earth pipe 4.50 mtr length and 40mm dia with necessary enclosers on the top etc. as required.

Extra for using salt/Charcole coke for pipe earthing etc. as required.

Providing and fixing energy meter

Providing and supplying of Bajaj make single tube light with frame work complete set

P/Fixing Tubular Switch (Havels / Anchor Make)

P.V.C pipe 25 mm

Providing & fixing Bas bar connection with changeover, Main switch 15 Kwatt with all connection etc complete

Providing and Installation of exhaust fan Bajaj make including fixing in wall

Providing and Installation of Ceiling fan Bajaj PSPO make with all fittings

Installation of 9.50 Mtr LT Pole

LT Pin Insulator

LT Sackle insulator

LT 2 wire cross arm

Wire Stay set

ACSR 6/1/2.11 Sqmm

Shifting of Utility :- Shifting of Prayer shed including dismentalling and carriage to store as per direction of the Engineer in Charge

a) Carpenter

b) Mazdoor

Earth work in excavation in foundation trenches not exceeding 1.50 m width or 10 Sq.m. on plan or drains not exceeding 1.50 m in width or 10 Sq.m. on plan including dressing of sides and ramming of bottoms, lift upto 1.50 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. a) Hard soil

Providing and laying in foundations and plinth cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :

a) In foundation & plinth

b) In wall etc

Errection of Prayer shed including as per direction of the Engineer in ChargeErrection of Prayer shed including

a) Carpenter

b) Mazdoor

Add for Roof screws, Bitumen washer, Limpit washer etc

Add for consultantancy charges for preparation of detailed working drawing, detailed structural drawing & Masterplan of school complex.

M/s D.T Construction House