PROVN OF ADDITIONAL TOILET BLOCK FOR AGNIVEER VAYU(WOMEN) IN TECH AREA AT AIR FORCE STATION UTARLAI

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out hard/dense soil complete all directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed

M&L PCC 1:4:8 type D-2(40mm graded aggregate) in foundation , sub base, manhole ,filling and mass concrete and post holes complete all as specified.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete alll as specifed & directed .

M&L for RCC Design Mix M-30 (20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete alll as specifed & directed .

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings , chajja and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specifed & directed .

M&L for RCC Design Mix M-30 (20 mm graded stone aggregate) as in slab, chajja complete alll as specifed & directed .

M & L TMT bars 10mm dia and over, cut to length bent to shape required incl crancking , bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conf to TMT bar complete all as specified.

M & L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape required incl crancking , bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified.

M&L sand filling under floor on in foundation in layers not exceeding 25cm each layer including watering and well ramming complete all as specified.

M&L for broken stone or boulder of Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

M&L for 40 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in floor, complete all as specified and directed.

M & L for block masonry with solid pre-cast cement concrete blocks made out of cement concrete 1: 3: 6 type C-1, using 20 mm graded crushed stone aggregate, exc. 10 cm in width and setting in cement mortar 1 : 6 complete all as specified and directed

M&L for Screed bed or bedding layer of mortar 15 mm thick CM 1:6 for laying floor finishes complete all as specified and directed

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for backing coat or bedding layer of mortar 10 mm thick CM 1:4 for wall surface complete all as specified and directed

M&L for Glazed ceramic tiles (450x350x7) thick, in walls etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M*L for Granite (of any type) use in WHB counter top and similar work 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete

M&L for rendering 10mm thick in CM 1:4 on stone concrete including finish even and smooth surfaces without using extra cement complete all as specified.

M&L for rendering 5 mm thick in CM 1:3 on stone concrete including finish even and smooth surfaces without using extra cement complete all as specified.

M & L Rendering 15mm thick on fair faces brick surfaces in cement mortar 1 : 4 finished even and smooth without using extra cement complete all as specified.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of all weather coat paint , over a coat of chalk whiting complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white wash, over a coat of chalk whiting complete all as specified and as directed.

M&L for preparation of new treated steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer in complete all as specified and directed

M&L for applying roof treatment on top of roof with APP modified membrane with non woven polyester reinforcement (centre core) shall be laid by torch application method with overlap 100mm on length side and 100mm on width side including a coat of bituminious oil based primer ( IS : 3884) @ 250gm / Sqm weight not less than 3 kg/Sqm complete all as specified and directed

M&L for rendering 10mm thick in cement mortar (1:4) on concrete surface as on roof slab, finished even and smooth without using extra cement mix with water proofing compound as per manufacturer instruction complete all as specified and directed

Supply only integral water proofing compound ISI Marked

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded

S & F 30 mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, paneling of both side prelam PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S & F factory made solid PVC door frame of size 50 mm X 47 mm made out of 5 mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with prelam sheet as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed , complete all as specified

S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section , complete all as specified

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F 150 mm long Aluminium handles, cast type, anodised , complete all as specified and directed.

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, complete all as specified and directed.

S &F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed.

S & F polymer white (polypropylene Delrin and ABS) low level flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, flush pipe, brass screws, handle etc complete having BIS description mark with IS: 7231 including taking down of existing low or high level flushing cistern any capacity and S & F of 32 mm dia PVC flush pipe suitable length and making all connection and making good disturbed surface complete all as specified and directed.

S & F brass chromium plated standard quality jet system suitable forsemi-pedestal pattern (Anglo-Indian Type) water closet, complete complete all as specified and directed

S & F vitreous china wash hand basins white, flate back, size 550 x 400mm including MS brackets, cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified

S & F cromium plated fency type15 mm bore dia bib tap , screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F 15 mm bore dia fency type pillar taps, cast copper alloy, with capstan heads, chromium plated ,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed.

S & F 15 mm bore dia fency type cromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S & F 450 mm long PVC connection with two brass nuts chromium plated internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

S & F shelf for WHB made out of white acrylic sheet of size 125 mm x 450 mm fancy type including fixing arrangement etc complete all as specified and directed.

S&F stainless steal grating 150 mm dia , complete all as specified and as directed.

S & F in toilet paper roll holder satainless steel of standard size complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with lid cover all as specified in SSR Part I capacity 500 ltr

S&F 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified

S & F 20 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S & F 15 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S & F 25 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S&F 75/100 mm bore UPVC pipe including all fittings laid down on floors by proper sealing and connecting to traps/ bends/tee etc complete all as specified and directed .

S&F 75 mm bore UPVC floor trap etc complete all as specified and directed .

S&F 75 mm bore UPVC bend/tee etc complete all as specified and directed .

S&F 100 mm bore UPVC S trap etc complete all as specified and directed .

Surface excavation in soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out completer all as specified and a sdirected by Engineer-in-Charge

M&L 100mm Cement concrete type D-2 1:4:8 (40mm aggregate) complete all as specified and directed

M&L Machine pressed precast concrete interlocking paver block any shape and with grey ciment no pigment and 60 mm thick & ends to be closed with PCC 1:2:4 type B-2 (Using 40mm graded stone aggregate) as site reqd to filling the gaps between tiles and road edgs complete all specified and directed. Confirning to IS 15658-2006 of 60 mm thickness, M-35 Grade.

M&L Sand filling under flors or in foundations including watering and consolidation complete all secified

Removing excavated material n.exc 50mm and deposting where directed at a level n exc. 1.5m above the startin point and depositing where directed

Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.5 mtr depth for foundation as for manholes, pier holes etc. and getting out in hard/dense soil complete.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cms complete all as specified

Removing excavated material soil to a distance n.exc 50 m and deposited where directed at a level not exceeding 1.5 m above the starting point

Plain cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregates) as in foundation of manholes and filling around the manholes complete all as specified.

Plain cement concrete 1:3:6 Type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and hunching against the sides of pipes after they are laid and tested for 150 mm bore SGSW pipe complete all as specified.

S & F PVC (SWR) pipes single soaketed , in any length with rubber ring joints, laid in trenches or in floors.

M&L for Walling of random rubble stone masonry using granite or trap stone, un coursed well bonded bedded and solidly hearted, built in cement mortor 1:6 complete all as specified.

M&L for 15 mm thick rendering on fare faces of stone masonry surface in cement mortor 1:4 including finishing the surface even and smooth without using extra cement including mixing of liquid water proofing compound as per manufacturer instructions (WPC shall be measured and paid separately) complete all as specified.

M&L Plain cement concrete (1:2:4) type B-O (using 12.5 mm graded crushed stone aggregates) as in benching, copings, bed plates and the like including necessary form work and finishing all exposed surfaces of concrete all as specified and shown on drawing.

M&L Pre- cast reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in manholes cover slab etc, set in cement mortar 1:6 all as specified and shown on drawing.

M&L for Mild steel deformed or twisted bars 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wir (annealed) not less than 0.90 mm dia complete.

M&L for Point wiring concealed type with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl concealed PVC conduit (ISI Mark) of required size with all accessories including providing providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing suitable size mounting plates complete accessories for mounting of modular switch/sockets alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLSH) copper conductor cable of size 1.5 Sqmm as continous earth wire connected to common earth and earth dolly complete all as specified.

One light / Fan point controlled by one way switch 6/5 Amp .

One 3 pin socket outlet 6/5 Amps on the same board with other switches

S&F switch piano flush modular type (ISI marked), single pole, one way 6/5 Amp, 240 Volts complete all as specified & directed.

S&F switch socket combination 2 in 1, 3 pin, 6/5 Amp piano flush modular type (ISI marked), 240 Volts complete all as specified & directed.

S&F ceiling rose, surface bakelite, three terminals complete all as specified & directed.

S&F LED tube light fitting 4' long, 20/18 Watt single phase 230 V with illumination efficiency more than 120 Lumen/Watt, 3000K/6000K, decorative tuneable white browse through mood changing colour options type slim ultra bright LED polycarbonate tube fixture with extruded heat shrink, environmental friendly energy efficientwith very high efficiency to give glare free light at light source incl integrated electronic driver complete all as specified and directed.

S&F Light mirror light fitting 2' long, 10/20 Watt single phase 230 V with illumination efficiency more than 120 Lumen/Watt, 3000K/6000K, decorative tuneable white browse through mood changing colour options type slim ultra bright LED polycarbonate tube fixture with extruded heat shrink, environmental friendly energy efficientwith very high efficiency to give glare free light at light source incl integrated electronic driver complete all as specified and directed.

S&F environmental friendly, ultra modern, energy saving, surface mounted decorative hexagon LED bulk head 10W including connecting up with 0.5 sqmm two core copper flexible conductor cable complete all as specified and directed.

S&F MCB DB CRCA sheet powder coated SPN 4 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables and flush to wall by making the hole in the wall and fixing the DB with cement work and plastering complete all as specified and as directed.

S&F MCB SPN having braking capacity 10 KA, 35 to 60 Amp, 240 volts 'C' curve complete all as specified and as directed.

S&F MCB single pole having braking capacity 10 KA, 6 to 32 Amps 240 volts 'C' curve complete all as specified and as directed.

S&F Ventilator fan of size 200mm sweep, sturdy engineering plastic body with louver single phase suitable for 230 volts 50 Hz and connecting up complete including provision of 3 core flexible cord cable of size 27/0.183 from ceiling rose to connector of fan including provisioning for installing as per site requirement with all accessories for fixing complete all as specified and directed.

M&L for sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC Conduit concealed type of suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly including cutting chases in brick/block/stone wall wherever necessary and where ever required sub main drawn through rigid MS conduit complete all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of conduit ISI Marked will be measured as one length.

Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point complete all as specified and testing on completion complete all as specified and as directed. Note:- The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.

Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 6 Sqmm 2 core with required aluminium cable lugs all as specified and directed.

Supply and laying Double wall corrugated HDPE duct pipe 50mm outer dia confirming to IS: 14930 (Part-II) of approved colour with fittings for cable protection complete laid in trenches or fixed on walls with clamps of suitable size all as specified and directed by Engineer-in-charge.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth and getting out in hard / dense soil for laying of cable / errection of poles / pipe etc complete all as specified and directed.

S&F GI tubing medium grade, ISI Marked conforming to IS 1239 Part-I 2004, 20mm bore with and including all fittings such as bends, elbows, tees, short length, socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc, complete all as specified and directed. (Note: Exacavation and earhwork if involved shall be measured and paid for separately.)

National Rewinding Works (BID ID -3147034)

M/S HARIOM CONSTRUCTION COMPANY (BID ID -3141342)

M/S TANUSHREE CONSTRUCTION COMPANY (BID ID -3141211)

M/S Tanisha Traders (BID ID -3141407)