Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.8 LAccepted-AOC | L1 | Accepted-AOC THE LOWEST TENDERER | |
| 2 | L2₹17.6 L+₹2.8 L (18.8%)Rejected-Finance | L2 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 3 | L3₹17.6 L+₹2.8 L (19.0%)Rejected-Finance | L3 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 4 | L4₹17.8 L+₹3.0 L (19.9%)Rejected-Finance | L4 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 5 | L5₹21.0 L+₹6.2 L (41.8%)Rejected-Finance | L5 | Rejected-Finance NOT THE LOWEST TENDERER |
Tender Value
₹29.0 L
EMD Value
₹57,980
Closing Date
22 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST MATHURA
Garrison Engineer East Military Engineer Services Mathura Cantt Mathura 281001
PROVN OF CERTAIN REVENUE WORKS AND MINOR WORKS UNDER GE (EAST) MATHURA
2022_MES_566192_1
8200-1310/E8
Open Tender
Civil Works
Item Rate
180 days
GE EAST MATHURA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE EAST MATHURA
₹57,980
6 Jan 2023
30 Nov 2022
24 Dec 2022
30 Nov 2022
22 Dec 2022
15 Dec 2022
30 Nov 2022 - 19 Dec 2022
Amount
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for 75 mm thick cement concrete type- D2 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.
M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping etc slightly rounded or chamfered angles and throating etc complete all as specified and as directed.
M&L for Sand filling under floors or in foundation including watering and consolidation for laying paver block complete all as specified and as directed.
M&L for 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base, sub floor and paving etc complete all as specified and as directed.
M&L for rubber moulded machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade complete all as specified and as directed.
M&L for Non skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M&L for providing 1mm thick wall care putty on plastered surfaces of walls complete as specified and as directed.
M&L preparation of new plastered surfaces of walls and applying two coats of weather proof acrylic exterior paint dark shade over and including a coat of primer (100% Acrylic) complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation etc for shaft, well, cesspits manholes, pier holes, etc n exc 10 Sqm on plan and getting as in soft/loose soil complete all as specified and as directed.
M&L brick work with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.
M&L for Brickwork using old size fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.
M&L for providing 20mm thick damp proof course in cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed.
Spreading and levelling excavated earth in layers n exc. 25 cm thick and well ramming including watering as required below flooring complete all as specified and as directed.
Removing excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.
M&L for reinforcement cement (nominal mix) type B1 1:2:4 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams, and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.complete all as specified and as directed.
Form work to soffits of suspended slabs such as roof slabs floor slab landing and similar work for not exceeding 200mm thick (horizontal or sloping) for rough finished surface of concrete complete all as specified and as directed.
Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide for rough finished surface of concrete complete all as specified and as directed.
M&L for mild steel TMT bars 10 mm dia and over, cut to lenth, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or secring with clips completd all as specified and as directed.
M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps jambs,window cills, cooking platform and like laid over and including 15 mm thick screed in cement mortar 1:4 pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of granite including rounded/ half rounded edges of granite and making hole for gas pipe in RCC shelves complete all as specified and as directed.
M&L for Non Skid ceramic joint free coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:6 complete all as specified and as directed.
All as per item serial No 21 here in before but on vertical surfaces laid over and including 10 mm thick rendering in cement motar 1:4 complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screw complete all as specified and as directed.
Excavating in post hoes (or similar holes) n exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25 cm in soft/loose soil complete all as specified and as directed.
M&L for cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
S&F rolled mild steel work in tubular trusses, verical posts including special shaped washer including purlins, rafters, angle cleats, fish plates, gusset plates, base/bearing plates, bolts and nuts etc. using EWR or induction butt welded tubes confirming to IS-1161-1979 grade St-240 complete all as specified and as directed.
S&F mild steel flat iron wind ties for roof including all necessary drilling, bolting or riveting etc complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
M&L for providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint for all hights complete all as specified and as directed.
M&L for providing and fixing Gypsum Board 10mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.
M&L for high gloss finish chequered cement concrete tiles 20cm x 20cm x 25mm thick, with grey cement and pigments, machine pressed, set jointed and pointed in neat cement slurry in floor laid over and including 20 mm thick screed bed in cement mortar 1:6 and filling the joints with Tile Max premium cementitious grout material of JK Cement or its equivalent complete all as specified and as directed.
S&F Post top lantern LED type 35 Watt 230V AC outdoor type with decorative post top for 360 degree indirect light IP65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.
S&F decorative casting aluminium heavy duty poles (1.5 meter length) for garden light complete with broader designer base finished base plate with polyurethane paint (with prior treatments) having outer dia for spigot entery 60mm including PCC foundation for mounting poles complete all as specified and as directed.
M&L for Sub Main Wiring wiring with two runs single core 2.5 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases (making good all to the disturbed surfaces as per existing) with and including 2.5 Sqmm copper green colour earth wire complete all as specified and as directed. Note : Two runs of 2.5 Sq mm (P&N), one run of 2.5 Sq mm earth wire and One run of PVC conduite will be measured as one RM.
S&F MCB distribution board, SPN 8 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified and as directed.
Returning, filling in including spreading, levelling,watering and well ramming excavated soil in layers not exceeding 25 cm thick each, after cables have been laid and tested complete all as specified and as directed.
Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor of size 10 Sqmm 4 core laid in trenches/duct/fixing on walls/poles or passing through HDPE double wall corrugated pipe (outer dia not less than 40mm) including connecting with suitable lugs, glands nuts and bolts in existing panel from pole/Main panel box an testing complete all as specified and as directed
S&F MCB TPN 40 to 100 Amps, 'C' series, bracking cap 10KA, 415V complete all as specified and as directed.
S&F in replacement of MCB SP 6-32 Amps, 'C' series, bracking cap 10KA, 240V complete all as specified and as directed.
SHRI JI ENTERPRISES
brajcon
MISHRA CONSTRUCTIONS
M/S PREETI CONSTRUCTION
M/S ANIL KUMAR
ARCHI ENGINEERS
M/s Hoti Lal Contractor
KASHI NATH BANWARI LAL
VANI CONSTRUCTION
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .