GE (W)/HSR-17/2024-25 REPAIR TO JOINERY OF OTM JCOs OR MD ACCN MES COLONY (DAY TO DAY) OF ZONE A UNDER GE (W) HISAR

Amount

Taking down chowkat or frame with shutters area n.exe 1.5 sqm each (Without taking off the shutters from the frame) incl cutting holes For hold fast & making good complete all as specified and directed.

Taking down chowkat or frame with shutters area exe 1.5 sqm but not exe 4 sqm each (without taking off the shutters from the frame) incl cutting holes for hold fast and making good complete all as specified and directed.

Taking down shutters of any description exe 1 sqm and n.exe 2 sqm each and removal from site etc complete all as specified and directed.

Easing of wooden doors/window/ventilator shutter any thickness, any size by planning with plane jack, by tightening of hinge screw, by adjusting/tightening tower bolts, sliding bolts etc and making it fully functional complete all as specified and directed.

S&F pressed steel Pre-painted frames of size 125x60mm for doors with one or more rebates incl necessary fixing lugs , hinges, lock strike plate etc including PCC 1:3:6 complete all as specified and directed.

S&F pressed steel Pre-painted frames of size 105x60mm for doors with one or more rebates incl necessary fixing lugs , hinges, lock strike plate etc including PCC 1:3:6 complete all as specified and directed.

Taking down cupboard Shutters /Partition /Shelves of any description with frame if any exc 1Sqm but N.exc 2 Sqm Each complete all as specified and directed.

S&F for 1mm thick factory made pressed steel shutter fixed with 1.25mm thick pressed steel frame of 105 x 60mm or as reqd for cupboards (consisting two shutters) including 06 Nos hinges and Godrej pattern three way locking system with suitable shape & size with MS rod & 01 Nos chromium plated handle with & including two coats of shop spray synthetic enamel painting over a coat of red oxide primer as colour approved by GE complete all as specified and directed. Note : 1. Cupboards frame to be fixed with 06 Nos nuts & bolts of dia 12mm & 150mm long at vertical outer edge of cupboards brick wall / concrete surface including making good the distrubed surfaces with proper packing from sides complete all as specified and directed. 2. front face shall only be measured for payment puropse. 3. the quoted rate are deemed to be included for providing the seperate locking system for cupboard of each individuals in Barrack.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F,MS framed work such as grill grating, framed Guard bars, barred iron doors,ladders, frame work for securing water tank,cooler stand and similar work conformed to Fe-410 or 310-0 complete all as specified and directed.

Providing and fixing 30mm thick factory made 100% solid WPC (wood polymer composite) solid plain/prelam/enrouted plain/enrouted painted flush door shutter of required size comprising of virgin PVC resin of K value 57-60(suspension grade) calclum carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives made from Extrusion process WPC foam sheet single extruded (inner) with density not less than 650 kg/cbm manufacture by an ISO 9001-2015 certificate company, having good screw holding capcity (screw withdrawl strength of 2000 n (face) and 1100 N (edge) minimum copmressive strength of 50 n/mm2, Modulus of elasticity 850/N/mm2 and resistance of spread flame of class A category with property of being termite/borer free, water/moisture proof, fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws for WC/bathroom/toilet/Kitchen/Balcony doors complete all as specified and directed.

Providing and fixing factory made 100% solid WPC (wood polymer composite)- door frame of size 75mmx50mm made from wood polymer composite (single extruded process) material comprising of virgin PVC polymer of K value 57-60(suspensive Grade), calcium carbonate and natural fibers (wood powder/rice Husk/wheat husk) and non toxic additivies fabricated with meter joints after applying PVC solvent cement & screwed with full body threaded star headed screws having minium frame density of 780Kg/cbm manufacture by and ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawel strength of (Min 990N/mm, minimum copressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof & fire retardent & fixed in position with SS draft fasteners/hold fast of required dia and length for WC/Bathroom/Toilet and external uses complete all as specified and directed. Note: the quoted price are deemed to be inclusive of good quality locking arrangement in both side , 3 nos of hinges, 2 nos of handles.

S&F steel window box type with side hung shutters Factory made including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed or welded.The rates include for painting with one shop coat of zinc chromate primer complete all as specified and directed.

S&F steel window box type with side hung shutters Factory made including box type hinges with steel handle and steel peg stay complete with out glazing bars devetailed or welded. The rates include for painting with one shop coat of zinc chromate primer complete all as specified and directed.

S&F steel ventilator with top hung/side hung shutter of glazed & gauged including hinges, steel peg stay complete with glazing bars including one shop coat of redoxide primer complete all as specified and directed.

S&F 35mm thick factory made plain framed, paneled shutter made of 2nd class Hard Wood of 35 mm thick(two panels)with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces. The size of rail and styles as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F flush shutter 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (with sash bars) edges but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers as specified in SSR Part-I Section 8 Clause 8.24(a), fitted to chowkats complete all as specified and directed.

M&L for preparation of new surfaces of wood or wood based materialas of any description over 10cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed.

Repairing of old unservicable window/ ventilator by necessary welding works and making the window servicable and complete all as specified and directed.

S & F framed work as in doors,windows or gates of angle or other section with gusset plates, rails, braces, etc, comlete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and pintal hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete confirming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 100mm aluminium anodised hasp and staple safety type complete all as specified and directed.

S&F 100 mm extruded aluminium alloy handles fabricated type complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extrued section 100 mm long complete all as specified and directed.

S&F 200 mm long aluminium alloy anodized sliding doot bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixining biolts abd sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F 200mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for two coats of synthetic enamel paint on steel surfaces of any description over 10cm in width or girth not otherwise described incl prepartion of new surfaces complete all as specified and directed.

S&F in repairs 200mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in Repairs for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sqm each pane and complete all as specified and directed.

S&F 3 mm thick figured glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sqm each pane and complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sqm each pane incl Hacking out old broken glass n exc 1.5 sqm (any thicknes, size and description) from wooden / metal frames glazed with putty or fixed with beads complete on any storey of the bldg. Note: the quoted price are deemed to be inclusive of figured glass in lieu of sheet glass in Toilet & Bathroom Area complete all as specified and directed.

Demoliton of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing debries out of MD land complete all as specified and directed.

M&L Brick work with Sub Class 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1: 6 on faces of brick work or concrete surfaces in patches, finished fair and even complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1: 6 on faces of brick work or concrete surfaces in patches, finished fair and even incl taking down old plaster of any description including racking out joints , hacking for key , scrubbing down with water etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of oil bound distemper over and including one coat of 1 mm thick wall care putty complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) tiles oof size 400 x 400 mm in floors, over and including 15 mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed flush with white or coloured Epoxy to match including dismantling of old tiling including cement mortar and complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 300 x 600 mm thick as in vertical surface in light and dark color cobinationset and jointed in neat cement slurry and pointed flush with white or coloured Epoxy to match ,over and including 10mm thick baking coat in CM 1:3 including dismantling of old tiling including cement mortar complete all as specified and directed.

M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular) of size 600mm x 1200 mm in floors etc set & jointed in neat cement slurry and flush pointed with white or coloured Epoxy to match, including 15mm thick screed bed in cement mortar 1:4 including dismantling of old tiling including cement mortar complete all as specified and directed.

Description all as per item No 41.00 above but in skirting over and including 10mm thick cement plaster 1:4 including dismantling of old tiling including cement mortar complete all as specified and directed.

S&F superior quality SS rails (Curtain rod/drapery rod), 20mm dia with and including fency type SS bracket 2 Nos of each opening and SS side stopper fency of required shape and size 2 Nos of each opening including taking down old unserviceable curtain rod of any type and repairing the disturbed area in CM 1:3 complete all as specified and directed

M&L for preparation of old painted steel or iron surfaces of any description, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted wooden or wood based surfaces of any description, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

S&F hollow PVC wall paneling, super strong quality single side prelaminated with flat or fancy patterned on laminated side, including PVC 'L' and 'U' sections for finishing of corners and ends etc inclusive of fixing with screw or with solvent cement requrired at site on walls incl dismantling of old unserviceable wall panelling of any type including cover fillet and frame work complete as specified and directed.

M&L Exposed metal frame ceilings with 8 mm thick calcium silicate board of silicious and calcerious material reinforced with cellulose fibre for fixing in 600 x 600 mm grid including powder coated aluminium snap grid framework of size 605mm x 605 mm including dismantling of old unserviceable false ceiling with framework of any type complete all as specified and directed.

M&L Powder coated Aluminium door Shutters , Aluminium Section weighing 0.55 Kg/Rm incl necessary joining cleats , glazing clips , rubber neoprene , packing , handle 2 Nos, locking system with 2 keys in each doors , hinges , anodised aluminium snaps bidding , screws etc complete all as specified and directed

S&F sheet glass 5.5 mm thick ordinary quality in squares exc 0.5 sq m including 25 micron black film and complete all as specified and directed.

M&L Powder coated aluminium window and ventilator shutters , side hung / top hung type (thickness or powder coating n less than 50 micron) without sash bars ,aluminium sections 0.55 Kg /m incl necessary joining cleats ,glazing clips ,rubber packing ,aluminium snap beading ,screws aluminium fittings such as peg stays 150 mm long (1 No) , hinges type B-21 100 mm long (2 No )., suitable handle (1 no ) complete all as specified and directed.

M&L Powder Coating (minimum thickness of powder coating 50 micron) Aluminium Door,Windows ,ventilators, with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body 50 mm long with rubber shoes fixed in repair complete all as specified and directed.

S&F in repair door closer Aluminium (Die cast) body hydraulic regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S & F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair complete all as specified and directed.

S&F stainless steel , Premium Design ,Heavy weight , Cloth Hanger of 6 pin , minimum length 250 mm complete all as specified and directed.

S&F in repair 17-19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work or in cupboard shutters including teak wood leaping on all around and necessary fittings like piano hinges , Knob, magnetic shutter catcher etc complete Job all as specified and directed .

OM CONSTRUCTION CO.

M/S RAJESH KUMAR & SONS

M/S D.N Choudhary

Balaji Construction Co.

SHRI HARI BUILDERS

M/s Rao Constructions, 1173 Urban Estate-II, Hisar