REPAIR/MAINT OF INTERNAL ELECTRIFICATION AND FIXTURES OF OTM / MD ACCN AT DRONACHAL BHOPAL

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed by Engr-in-charge.

M & L for concealed point wiring for one light/fan point with 1.50 sqmm (nominal area), FRLS PVC insulated, unsheathed, single core multi-stranded copper conductor cable, 1100 volts grade,ISI marked controlled by one one-way switch, drawn through and including concealed medium grade PVC conduit not less than 20 mm dia, ISI marked, with all accessories(PVC Casing and caping of size 25 mm , ISI marked with complete accessories to be used wherever wiring to be run on ceilings and concrete surfaces) including one run of 1.5 sqmm FRLS muti stranded copper conductor (Green colour cable) as earth continuity wire connected to common earth dolly, including sunk sheet steel terminal box made out of 1.20 mm thick and not less than 60 mm in depth GI/MS/ pressed steel terminal box to be conclead in wall, duly painted with two coates of anti corrosive black bituminous paint over a coat of red oxide primer in and out sides and two coated of aluminium paint on internal surface , including laminated hylem sheet cover, ISI marked of Make" Hylem" for mounting of fittings like switches, sockets, fan regulators etc. fixed with galvanised screw and cup washer complete all as specified and directed by Engr-in-charge. Note : Wiring to be done as per approved colour code in IE rule.

All as per item No. 2 here-in-before but for one light point controlled by two 2 way switches, with FRLS cables of 1.5 sqmm complete all as specified and directed by Engr-in-charge.

All as per item No. 2 here-in-before but for 3 pin socket outlet, 5 Amp on the same board with other switches, complete all as specified and directed by Engr-in-charge.

All as per item No. 2 here-in-before, but for 3 pin 5 amp switch socket combination on independent board with other switch complete all as specified and directed by Engr-in-charge.

All as per item No. 2 here-in-before but wiring with 2.5 Sq mm FRLS mutistranded copper conductor cable for 5/15 amp switch socket combination on independent board and with 2.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed by Engr-in-charge. .

All as per item No.2 here -in- before but wiring with 4.0 Sq mm FRLS mutistranded copper conductor cable for Geyser and AC point on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed by Engr-in-charge. .

M & L for Point wiring with PVC insulated unsheathed electric cable 1100 volts grade, single core,FRLS cable having multistranded copper conductor of 1.5 Sqmm nominal cross sectional area, ISI marked, drawn in existing concealed conduit with 1.5 Sqmm green PVC insulated unsheathed multistranded copper conductor FRLS cable, ISI marked as continuous earth conductor connected to earth dolly by providing suitable lugs including new laminated hylem sheet cover of min 3.0 mm thick , ISI marked of Make" Hylem" of suitable sizes to be fixed/ mounting on existing MS/ GI sunkun boxes for mounting of fittings like switches, sockets, fan regulators etc fixed with galvanised screw and cup washer. complete all as specified and directed by Engr-in-charge for the following. Note : Wiring to be done as per approved colour code.

(a) One light/fan point controlled by one switch.

(b) One bell point controlled by one bell Push

(c) One light point controlled by two 2-way switches.

(d) One 5 Amps socket out let point controlled by one switch on independent board.

(e) One 5 Amps socket out let point controlled by one switch on same board.

(f) All as per item 8.00 herein before but wiring with 2.5 Sq mm FRLS mutistranded copper conductor cable for 5/15 amp switch socket combination on independent board and with 2.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed by Engr-in-charge. .

(g) All as per item 8.00 herein before but wiring with 4.0 Sq mm FRLS mutistranded copper conductor cable for Geyser and AC point on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed by Engr-in-charge. .

M & L for point wiring with 1.5 Sqmm single core, multi stranded copper conductor 1100 V grade, ISI marked , PVC insulated unsheathed cable (with approved colour code) FRLS cable drawn in & including PVC casing caping of 25 mm wide, with double locking type, ISI marked including all accessories casing caping as approved by EIC, with PVC 1.5 mm multi stranded insulated unsheathed FRLS copper wire, ISI marked of green colour for continous earth, including sunken box made out of 1.20 mm thick and not less than 60 mm in depth GI/MS/ prssed steel terminal box to be conclead in wall, duly painted with two coated of aluminium paint on internal surface and two coat of anti corrosive paint over external surface, including laminated hylum sheet cover, ISI marked of Make" Hylem" for mounting of fittings like switches, sockets, fan regulators etc. fixed with galvanised screw and cup washer complete all as specified and directed by Engr-in-charge. Note : Wiring to be done as per approved colour code.

(a) One light/fan point controlled by one switch.

(b) One 3 pin socket outlet 5 Amps on independent board.

(c) One 3 pin socket outlet on same board with other switch.

(d) All as per item 9.00 herein before but wiring with 2.5 Sq mm FRLS mutistranded copper conductor cable for 5/15 amp switch socket combination on independent board and with 2.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed by Engr-in-charge. .

S&F Polycarbonate switch piano, flush button, single pole, one way 5 Amp , 240 volts ISI marked.

S&F Polycarbonate switch piano, flush button, single pole, two way, 5 Amp, 240 volts ISI marked.

Supply and fixing, Polycarbonate ceiling rose, surface type, 3 terminal, 240 , ISI marked.

S&F Polycarbonate Socket outlet, flush button, single pole, 3 pin, 5 Amp, 240 volts ISI marked.

S&F Polycarbonate Switch socket combination multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete as directed by Engr-in-charge.

S&F Polycarbonate angular lamp holder with back plate, suitable for batten fittings including LED bulb 9 watt.

S&F,Ding Dong Call Bell AC. 230 volts, single pole.

S & F in repair Bell push, flush type, SP, 5 amp, 240V.

Taking down old unserviceable sub main wiring of any size and any description all as directed by Engr-in-charge.

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLS cable of 4.0 Sqmm (with colour code), drawn in but including non metallic rigid PVC conduit of 25 mm dia, ISI marked including one run of PVC insulated unsheathed, multistranded copper conductor FRLS cable of 4.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in surfaces/ recess complete all as specified and directed by Engr-in-charge

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLS cable of 6.0 Sqmm (with colour code), drawn in but including non metallic rigid PVC conduit of 25 mm dia, ISI marked including one run of PVC insulated unsheathed, multistranded copper conductor FRLS cable of 6.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in surface/ recess complete all as specified and directed by Engr-in-charge

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLS cable of 10.0 Sqmm (with colour code), drawn in but including non metallic rigid PVC conduit of 25 mm dia, ISI marked including one run of PVC insulated unsheathed, multistranded copper conductor FRLS cable of 6.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in surface/ recess complete all as specified and directed by Engr-in-charge

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLS cable of 4.0 Sqmm (with colour code), drawn in existing surface/ recessed steel/ PVC conduit/ PVC casing capping, including one run of PVC insulated unsheathed, multistranded copper conductor FRLS cable of 4.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in complete all as specified and directed by Engr-in-charge

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLS cable of 6.0 Sqmm (with colour code), drawn in existing surface/ recessed steel/ PVC conduit/ PVC casing capping, including one run of PVC insulated unsheathed, multistranded copper conductor FRLS cable of 6.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in complete all as specified and directed by Engr-in-charge

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLS cable of 10.0 Sqmm (with colour code), drawn in existing surface/ recessed steel/ PVC conduit/ PVC casing capping, including one run of PVC insulated unsheathed, multistranded copper conductor FRLS cable of 6.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in complete all as specified and directed by Engr-in-charge

Note for item No 19.00 to 24.00, two runs of Single core of PVC cable and one run of earth cable as per colour coding will be measured as One Running meter

Taking down old unserviceable TPN / SPN MCB DB's incl MCB of any size and any discription all as directed by Engr-in-charge.

S & F in repair sheet metal enclosure for MCB, DB, TPN 415 Volts 200 amps rated busbar 4 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 with 63 A MCB TPN as incommer and MCB SP/TP in outgoing complete all as specified and directed by Engr-in-charge.

S&F sheet metal enclosure for VT DB TPN, MCCB DB TPN 4 way, double door with 100 Amp,25 KA,TP MCCB as incomer (Vertical type double door,100 Amps MCCB rate inclusive) and suitable for SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first quality of suitable size for mounting of DB box with provision for 4 Pole MCCB as incomer and SP/TP MCBsas outgoingscomplete all as specified and directed by Engr-in-charge.

S&F sheet metal enclosure for VT DB TPN, MCCB DB TPN 6 way, double door with 125 Amp,25 KA,TP MCCB as incomer (Vertical type double door DB, 125 Amps MCCB rate inclusive)and suitable for SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first quality of suitable size for mounting of DB box with provision for 4 Pole MCCB* as incomer and SP/TP MCBs as outgoings complete all as specified and directed by Engr-in-charge by Engr-in-charge.

S & F in repair sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 12 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge .Make- Legrand/ Seimens/ Schinder/L&T.

S & F in repair sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 8 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge.

S & F in repair sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 4 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge.

S&F MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' Curve including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-charge .

S&F MCB SPN 32 to 40 A amps 10 KA , 'C' Curve including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge.

S&F MCB TPN 40 to 63 Amps, 10 KA breaking capacity, 'C' Curve including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-charge.

S & F in repair single pole and neutral enclosure with two pin and earth, plug and socket , suitable for single phase 240 V,complete with one single pole MCB of capacity 20 amps having `C` charactristic, breaking cap 10 KA, including industial plug top, complete all as specified and as directed by Engr-in-charge.

S & F in repair 1 x 20 watt LED tube light fitting basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver, LED Decorative luminaire with suitable for lamps LED Light high efficiency LED driver,Optimized heat dissipation for ensuring high LED life span AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charge.

Taking down existing u/s fitting any type any size and S&F LED 10 Watt tube light fitting intergated type,( Length min 2 feet) , 240 v, PF > 0.90, colour Temp 6500 K, suitable for surface mounting on wall, complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed by Engr-in-charge

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth

Supply and fix in replacement of plastic laminated sheet cover ISI marked with required Nos of space for switches/ Sockets/Regulator of size 250x280mm complete all as specified and directed by Engr-in-charge.

Earthing complete with galvanised steel earth plate electrode 60×60cm×6mm thick, buried directly in ground any soil (hard/ soft) (earth pit not less level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron earth wire of 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 SSR including earth pit in any soil char coal common salt , 15 mm all around earth plate PCC (1:3:6) type culprit, with 40 x40x6 mm angle iron frame and PCC cover (1:2:4) type B1 , water pipe funnel and GI protection pipe light grade 15mm dia upto panel connecting earth lead to panel all as specified and directed by EIC. Note : (i) Earth continuity conductor including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate. (ii)Earth shall be tested by the contractor in presence of Engr-in-Charge and record shall be maintained for ready reference.

S&F LED Building security light fitting 1x 25 W new generation energy saving and environmental friendly long life made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seprate driver compartment with IP 66 protection and impact resistance of IK07 for mounting existing bracket complete including all accessories pre-wired with 3 X 1.5 sqmm single core mutistrand copper conductor cable up to celing rose/ terminal box and proper earthing connection must be provided rate inclusive, all as specified and directed by Engr-in-Charge

Supply and fix in repair of ceiling fan regulator ISI marked, any type complete all as specified and directed by Engr-in-charge.

PRAGATI ELECTRICALS AND ELECTRONICS

Vinayak Trading House

M/s H V Infra Projects

anand enterprises

MODI CORPORATION

UMESH ENTERPRISES

M S MEWALAL UPADHYAY