SPL REPAIRS M AND O FOR CONVERSION OF LT OH LINES TO LT UG CABLES AT APS AREA AND SPL REPAIRS EM FOR REPLACEMENT OF CONVENTIONAL BLDG LIGHTS TO ENERGY EFFICIENT LED FITTINGS IN CMP CENTRE AND SCHOOL UNDER GE SOUTH BANGALORE

Amount

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M deep and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removal of surplus soil to a distance not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.

M&L for sand cushioning to under ground cable in layers ( 8 cm before laying the cable and 15 cm after laying the cable and punned into 18 cm thickness) in trenches for cable protection complete all as specified and directed. Note : - Punned thickness only will be measured and paid under this item.

Supplying and laying sub class 'B' bricks locally available best quality, designation 75 for cable protection complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) for making good road surface, hard standing etc complete all as specified and as directed.

S&F GI pipe light grade 40 mm dia for cable protection fixed to poles/bldg including 2 nos MS clamps made out of 25 x 3mm MS flat iron into shape and painting incl bolt, nut, washer etc. complete all as specified and as directed.

Supply & laying GI pipe medium grade 40 mm dia for cable protection under road/culvert etc complete all as specified and as directed.

Supply and laying or fixing or passing in trenches/ on pole / through pipes, 1100 volts grade XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) multistranded aluminium conductor of cross sectional area 3.5 core 25 sq mm including connection with cable glands & lugs etc and testing on completion including dismantling the existing unserviceable LT over head ACSR conductor complete all as specified and as directed. Note for item nos. 9 &10: Excavation & earth work, sand cushning and bricks,GI protection pipes for cable protection etc shall be measured and paid seperately under respective items of this Sch.

Supply and laying or fixing or passing in trenches/ on pole / through pipes, 1100 volts grade XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) multistranded aluminium conductor of cross sectional area 3.5 core 50 sq mm including connection with cable glands & lugs etc and testing on completion including dismantling the existing unserviceable LT over head ACSR conductor complete all as specified and as directed.

M&L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4mm dia connected by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 (with 20mm graded stone aggregate),chamber and 50mm thick precast RCC (1:2:4) cover slab re-inforced with XPM Jalli including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed .

S&F TPN copper bus bar box, outdoor type, 200 A capacity mounted on porcelain bridge insulator for one incoming cable and four out going cable, housing in sheet metal enclosure of 3.0 mm thick CRCA sheet and angle iron frame 40x40x6mm, painted with two coats synthetic enamel paint including arrangement for cable gland for incoming and outgoing cables, locking arrangement, suitable foundation/platform for mounting the FPB with space for and including the following switch gears complete all as specified and diretcted. (a) MCCB 100 A FP, 16 KA (for incoming control)

S&F LED batten 20 watt, 4 feet long suitable for indoor applications with integrated electronic driver of operating voltage 110 to 270 Volts, lumin output not less than 1800 lm including connecting up with twin core twisted flexible copper conductor cable with connector and taking down existing unserviceable surface/ ceiling mounted FTL fitting complete all as specified and diretcted. Note for item nos. 13, 14 & 15:- Taking down old conventional light fitting from Sl item No. 13, 14 & 15 will be handed over to AGE E/M store yard. Make:- Bajaj Cat No. BCLSBAL 20 CW/C&S Cat No LTTB4F20WLED/W / Jaguar Cat No LGLZ01X020XC

S&F LED batten 10 watt, 2 feet long, suitable for indoor applications with integrated electronic driver of operating voltage 110 to 265 Volts, lumin output not less than 900 lm including connecting up with twin core twisted flexible copper conductor cable with connector and taking down existing unserviceable surface/ ceiling mounted FTL fitting complete all as specified and diretcted. Make:- Bajaj Cat No. BCLSB 10 WH/ C&S Cat No LTTB2F10WLED/W/ Jaguar Cat No. LGLZ01X010XC

S&F LED batten type, 5 watt, 1 feet long, suitable for indoor applications with integrated electronic driver of operating voltage 110 to 265 Volts, lumin output not less than 900 lm including connecting up with twin core twisted flexible copper conductor cable with connector and taking down existing unserviceable surface/ ceiling mounted FTL fitting complete all as specified and diretcted. Make:- Bajaj Cat No. BCLSB 05 NW/ C&S Cat NoLTTB1F5WLED/W.

RRK PROJECTS

Varsha Enterprises

M.G. Enterprises

kamadhenu Electricals

CITIZEN ELECTRICALS