Additional work of Construction of Cement Concrete Road Works Fire Protection works Miscellaneous Works at

BILL OF QUANTITY - MISCELLANEOUS WORKS

DSR - RATE (RS.) AMOUNT(RS.)

2021/ DESCRIPTION OF ITEM UNIT QTY

NO. DSR NS DSR ITEMS NS ITEMS

2.6 1.1 Earthwork in excavation by mechanical means (hydraulic

excavator)/manual means over areas (exceeding 30cm in depth,

1.5m in width as well as 10sqm on plan) including disposal of

excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to

be levelled and neatly dressed:

2.8 1.2 Earth work in excavation by mechanical means (hydraulic

excavator)/ manual means in foundation trenches or drains (not

exceeding 1.5m in width or 10sqm on plan) including dressing of

sides and ramming of bottoms, lift upto 1.5m, including getting out

the excavated soil and diposal of surplus excavated soil as directed,

2.8.1 1.2.1 within

2.25 Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20cm in depth:

consolidating each deposited layer by ramming and watering, lead

up to 50 m and lift upto 1.5 m

16.3 1.6 Supplying and stacking at site.

16.3.2 1.6.1 63 mm to 45 mm size stone aggregate cum 55 1,624.50 89,347.50

16.3.3 1.6.2 53 mm to 22.4 mm size stone aggregate cum 45 1,837.25 82,676.25

16.3.6 1.6.3 Stone screening 13.2 mm nominal size (Type A) cum 40 1,865.00 74,600.00

16.3.7 1.6.4 Stone screening 11.2 mm nominal size (Type B) cum 25 2,065.70 51,642.50

Digitally signed by

MANIKANTH MANIKANTH

Authorized Signatory of Contractor Page 3 of 18 RATHINASAMY RATHINASAMY NBCC

DSR - RATE (RS.) AMOUNT(RS.)

2021/ DESCRIPTION OF ITEM UNIT QTY

NO. DSR NS DSR ITEMS NS ITEMS

Laying spreading and compacting stone aggregate of specified sizes

to WBM specifications including spreading in uniform thickness,

hand picking , rolling with 3 wheeled road / vibratory roller 8-10

tonne in stages to proper grade and camber, applying and brooming

requisite type of screening / binding material to fill up interstices of

coarse aggregate watering and compacting to the required density .

Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone

aggregate 40 mm nominal size) in pavements, laid to required slope

and camber in panels as required including consolidation finishing

and tamping complete.

Providing and laying design mix cement concrete of M-30 grade, in

roads/ taxi tracks/ runways, using cement content as per design mix,

using coarse sand and graded stone aggregate of 40 mm nominal

size in appropriate proportions as per approved & specified design

criteria, providing dowel bars with sleeve/ tie bars wherever required,

laying at site, spreading and compacting mechanically by using

needle and surface vibrators, levelling to required slope/ camber,

finishing with required texture, including steel form work with sturdy

M.S. channel sections, curing, making provision for contraction/

expansion, construction & longitudinal joints (10 mm wide x 50 mm

deep) by groove cutting machine, providing and filling joints with

approved joint filler and sealants, complete all as per direction of

Engineer-in-charge (Item of joint fillers, sealants, dowel bars with

sleeve/ tie bars to be paid separately).

Note: - Cement content considered in M-30 is @ 340 kg/cum.

Excess/ less cement used as per design mix is payable/ recoverable

Cement concrete manufactured in automatic batching plant (RMC

plant) i/c transportation to site in transit mixer

Digitally signed by

MANIKANTH MANIKANTH

Authorized Signatory of Contractor Page 4 of 18 RATHINASAMY RATHINASAMY NBCC

DSR - RATE (RS.) AMOUNT(RS.)

2021/ DESCRIPTION OF ITEM UNIT QTY

NO. DSR NS DSR ITEMS NS ITEMS

Providing and fixing pre-moulded joint filler in expansion joints of per cm

RCC roads / CC pavements after making the joints dust free with depth

high pressure air jet cleaners, all complete as per direction of the per

16.45 1.10 Engineer-in-Charge. (Pre-moulded joint fillers shall be made of 394 4.70 1,851.80

bitumen hot sealing compound impregnated fibre board having per

impregnation more than 35%, conforming to IS:1838 for fibre board metre

and IS: 1834 for hot sealing bitumen compound grade A.) length

TOTAL OF RIOAD WORKS 31,50,136.50 -

Digitally signed by

MANIKANTH MANIKANTH

Authorized Signatory of Contractor Page 5 of 18 RATHINASAMY RATHINASAMY NBCC

DSR - RATE (RS.) AMOUNT(RS.)

2021/ DESCRIPTION OF ITEM UNIT QTY

NO. DSR NS DSR ITEMS NS ITEMS

2.0 FIRE PROTECTION WORKS

2.1 SEALING OF ELECTRICAL SHAFT

NS 2.1.1 Providing ans sealing the electrical shafts with 10 mm thick, 120

minutes fire rating, calcium silicate board made with Calcareous &

Siliceous materials reinforced with cellulose fiber manufactured

through autoclaving process to give stable crystalline structure with

minimum compressive strength 225 kg/ sq. cm, bending strength

100 kg/sq. cm , with 50 mm thick non- combustible as per B.S. 476

part IV, 100% humidity resistance and also having thermal

conductivity <0.043 w/mK. fixed to wall by 25 x 25 x 4 mm angle

painted with fire retardent paint all complete. ( Steel work to be paid

2.2 FIRE DOORS FOR SHAFT

NS 2.2.1 Supply of Red Merrandi wooden door frame of section 145 mm x 70

mm with heat activated intumescent fire seal strip of section 10 mm

x 4 mm (Astroflame / Abesco and one coat of anti-termite fire

retardant Primer and 55 mm thick asbestos free composite fire /

smoke check wooden shutters of 120 min. fire Rating confirming to

BS;476 Part 22 & IS : 3614 Part II comprising of two 9 mm thick

Starpan Calcium Silicate boards, a 100% without Asbestos, Brucite

and Meerschaum, having density not more than 1150Kg/M3 and

thermal conductivity 0.14 W/m*K sandwiching 31mm thick fire

resistance insulation filler faced with 3 mm thick commercial ply

facing on both side with heat activated intumescent fire seal strip of

size 10 mm x 4 mm (Astroflame / Abesco mounted in the grooves of

hardwood lipping on all sides except bottom. The intumescent

sealant shall be used to fill the gaps between board and internal

wooden lipping. sqm 20 11,632.00 2,32,640.00

Digitally signed by

MANIKANTH MANIKANTH

Authorized Signatory of Contractor Page 6 of 18 RATHINASAMY RATHINASAMY NBCC

DSR - RATE (RS.) AMOUNT(RS.)

2021/ DESCRIPTION OF ITEM UNIT QTY

NO. DSR NS DSR ITEMS NS ITEMS

The single/double leaf doors shall be provided with vision panels of

minimum size 300 x 300 mm made out of 5 mm thick clear fire rated

glass (imported) for 120 minutes fire rating of Firelite (Japan)/ Asahi

( Japan) / Schott from (Germany) fully transparent in fire/non-fire

conditions having minimum 92% transparency with complete fire

rated gasket channel & moulding beading and filling the gap

between moulding /beading and glass with suitable sealant including

fixing each shutter with 4 Nos. stainless steel ball bearing hinges of

size 100mm x 76mm x 3mm with screws from Marshall / Dorma's BB

4330 / Assa Abloy's Lockwood range.The door frame and door

shutters shall be painted with fire retardant paint of 'BERGER /

SUKRI' or equivalent to provide Class 1 surface spread of flame

conforming to BS 476 Part 7, IS : 12777 in desired shade over a

coat of fire resistant primer. The manufacturer should have tested

the entire assembly from CBRI Roorkee along with the fire rated

vision panels and hardware for achieving 2 hrs. fire rating and shall

submit the same for both single leaf and double leaf configurations

prior to manufacturing to the Engineer-in-charge.

The rate includes the cost of all the materials, labor & T & P required

for proper completion of the item described above. (For payment

purpose the area of opening including door frame shall only be

measured). The agency shall provide one number additional door

along with all frame and fittings for getting it tested from CBRI

Roorkee as per required standards ( items like glass vision panels

shall be paid separately under separate head.)

Digitally signed by

MANIKANTH MANIKANTH

Authorized Signatory of Contractor Page 7 of 18 RATHINASAMY RATHINASAMY NBCC

DSR - RATE (RS.) AMOUNT(RS.)

2021/ DESCRIPTION OF ITEM UNIT QTY

NO. DSR NS DSR ITEMS NS ITEMS

NS 2.2.3 Supply and fixing of 2hrs. fire rated CBRI tested as per IS 3614 Part -

2 and BS 476 Part-22 mortice dead lock with 80mm cylinder having

one side key from Ingersoll Rand's Briton EL 2020 series / Dorma

288 series / Marshall MHLDL 13002.

NS 2.2.4 Supply and fixing of 2 hrs. fire rated CBRI tested as per IS 3614 Part

-2 and BS 476 Part-22 stainless steel D-Type pull handle of size

22mm dia and 300mm long from Dorma TGDI series / Ingersoll

Rand's -Briton Series/ Marshall make.

NS 2.5.5 Providing, installation, testing and commissioning of gun metal

valves of following sizes as required :

TOTAL OF FIRE PROTECTION WORKS - 3,12,458.00

Digitally signed by

MANIKANTH MANIKANTH

Authorized Signatory of Contractor Page 8 of 18 RATHINASAMY RATHINASAMY NBCC

DSR - RATE (RS.) AMOUNT(RS.)

2021/ DESCRIPTION OF ITEM UNIT QTY

NO. DSR NS DSR ITEMS NS ITEMS

Miscelleneous work

6.4 3.4 Brick work with common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 in superstructure above plinth level up to floor

V level in all shapes and sizes in :

6.4.2 3.4.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 4 8,288.35 33,153.40

6.13 3.5 Half brick masonry with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in superstructure above plinth level

6.13.2 3.5.1 Cement mortar 1 : 4 (1 cement : 4 coarse sand) sqm 16 1,018.05 16,288.80

6.15 3.6 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars

at every third course of half brick masonry. sqm 16 86.45 1,383.20

9.1 3.7 Providing wood work in frames of doors, windows, clerestory

windows and other frames, wrought framed and fixed in position with

hold fast lugs or with dash fasteners of required dia & length ( hold

fast lugs or dash fastener shall be paid for separately).

9.1.3 3.7.1 Kiln seasoned and chemically treated hollock wood cum 0.04 74,199.70 2,967.99

9.21 3.8 Providing and fixing ISI marked flush door shutters conforming to IS :

2202 (Part I) non-decorative type, core of block board construction

with frame of 1st class hard wood and well matched commercial 3

ply veneering with vertical grains or cross bands and face veneers

on both faces of shutters :

9.21.1 3.8.1 35 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws sqm 2 2,015.75 4,031.50

9.76 3.9 Providing and fixing bright finished brass 100 mm mortice latch and

lock with 6 levers and a pair of lever handles of approved quality with

necessary screws etc. complete. each 1 723.80 723.80

9.101 3.10 Providing and fixing aluminium hanging floor door stopper ISI

marked anodised (anodic coating not less than grade AC 10 as per

IS:1868) transparent or dyed to required colour and shade with

necessary screws etc. complete.

9.101.1 3.10.1 Single rubber stopper each 1 35.50 35.50

Digitally signed by

MANIKANTH MANIKANTH

Authorized Signatory of Contractor Page 9 of 18 RATHINASAMY RATHINASAMY NBCC

DSR - RATE (RS.) AMOUNT(RS.)

2021/ DESCRIPTION OF ITEM UNIT QTY

NO. DSR NS DSR ITEMS NS ITEMS

11.49 3.11 Providing and laying Vitrified tiles in floor with different sizes

(thickness to be specified by the manufacturer), with water

absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid with

cement based high polymer modified quick set tile adhesive (water

based) conforming to IS : 15477, in average 6 mm thickness,

including grouting of joints (Payment for grouting of joints to be made

13.1 3.12 12 mm cement plaster of mix:

13.2 3.13 15 mm cement plaster on the rough side of single or half brick wall

13.11 3.14 18 mm cement plaster in two coats under layer 12 mm thick cement

plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick

cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with

13.48A 3.15 Finishing walls with 100% Premium acrylic emulsion paint having

VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,

Alkali & fungal resistance, dirt resistance exterior paint of required

shade (Company Depot Tinted) with silicon additives.

13.48A.1 3.15.1 New work (Two or more coats applied @ 1.43 litre/ 10

sqm. Over and including priming coat of exterior primer

applied @ 0.90 litre/10 sqm. sqm 14 154.45 2,162.30

13.62 3.16 Painting with synthetic enamel paint of approved brand and

manufacture of required colour to give an even shade :

13.62.1 3.16.1 Two or more coats on new work over an under coat of suitable

shade with ordinary paint of approved brand and manufacture sqm 7 191.40 1,339.80

Digitally signed by

MANIKANTH MANIKANTH

Authorized Signatory of Contractor Page 10 of 18 RATHINASAMY RATHINASAMY NBCC

DSR - RATE (RS.) AMOUNT(RS.)

2021/ DESCRIPTION OF ITEM UNIT QTY

NO. DSR NS DSR ITEMS NS ITEMS

13.82 3.17 Wall painting with acrylic emulsion paint, having VOC (Volatile

Organic Compound ) content less than 50 grams/ litre, of approved

brand and manufacture, including applying additional coats

wherever required, to achieve even shade and colour.

TOTAL OF MISCELLANEOUS CIVIL WORKS 1,22,331.34 -

TOTAL OF MISCELLANEOUS WORKS CARRIED OVER TO

SUMMARY OF COSTS 32,72,467.84 3,12,458.00

Digitally signed by

MANIKANTH MANIKANTH

Authorized Signatory of Contractor Page 11 of 18 RATHINASAMY RATHINASAMY NBCC

Additional work of Construction of Cement Concrete Road Works, Fire Protection Works & Miscellaneous

Works at the National Institute of Criminology & Forensic Science (NFSU Delhi Campus) at sector-III & V,

Rohini, New Delhi

SUMMARY OF MISELLANEOUS WORKS (figures in Rs.)

Sl. No. Chapter Description/ Head of work

Scheduled Items Non Scheduled items

2 FIRE PROTECTION WORKS - 10,23,568.00

TOTAL CARRIED OVER TO GRAND SUMMARY OF

Digitally signed by

MANIKANTH MANIKANTH

Authorized Signatory of Contractor Page 12 of 18 RATHINASAMY RATHINASAMY NBCC

Additional work of Construction of Cement Concrete Road Works, Fire Protection Works & Miscellaneous

Works at the National Institute of Criminology & Forensic Science (NFSU Delhi Campus) at sector-III & V,

Rohini, New Delhi

BILL OF QUANTITY - MISCELLANEOUS WORKS

DSR - RATE (RS.) AMOUNT(RS.)

2021/ DESCRIPTION OF ITEM UNIT QTY

NO. DSR NS DSR ITEMS NS ITEMS

2.6 1.3 Earthwork in excavation by mechanical means (hydraulic

excavator)/manual means over areas (exceeding 30cm in

depth, 1.5m in width as well as 10sqm on plan) including

disposal of excavated earth, lead upto 50m and lift upto 1.5m,

disposed earth to be levelled and neatly dressed:

2.8 1.4 Earth work in excavation by mechanical means (hydraulic

excavator)/ manual means in foundation trenches or drains

(not exceeding 1.5m in width or 10sqm on plan) including

dressing of sides and ramming of bottoms, lift upto 1.5m,

including getting out the excavated soil and diposal of surplus

2.8.1 1.4.1 excavated

All Kinds ofsoil

. directed, within a lead of 50 m: cum 19 286.85 5,450.15

2.25 1.5 Filling available excavated earth (excluding rock) in trenches,

plinth, sides of foundations etc. in layers not exceeding 20cm

in depth: consolidating each deposited layer by ramming and

watering, lead up to 50 m and lift upto 1.5 m

2.27 1.7 Supplying and filling, in plinthwith Jamuna sand under floors

including, watering, ramming consolidating and dressing

16.3 1.6 Supplying and stacking at site.

16.3.2 1.6.1 63 mm to 45 mm size stone aggregate cum 51 1,624.50 82,849.50

16.3.3 1.6.2 53 mm to 22.4 mm size stone aggregate cum 25 1,837.25 45,931.25

16.3.6 1.6.3 Stone screening 13.2 mm nominal size (Type A) cum 20 1,865.00 37,300.00

16.3.7 1.6.4 Stone screening 11.2 mm nominal size (Type B) cum 20 2,065.70 41,314.00

Digitally signed by

MANIKANTH MANIKANTH

Authorized Signatory of Contractor Page 13 of 18 RATHINASAMY RATHINASAMY NBCC

DSR - RATE (RS.) AMOUNT(RS.)

2021/ DESCRIPTION OF ITEM UNIT QTY

NO. DSR NS DSR ITEMS NS ITEMS

Laying spreading and compacting stone aggregate of

specified sizes to WBM specifications including spreading in

uniform thickness, hand picking , rolling with 3 wheeled road /

1.7 vibratory roller 8-10 tonne in stages to proper grade and Cum 110 865.80 95,238.00

camber, applying and brooming requisite type of screening /

binding material to fill up interstices of coarse aggregate

watering and compacting to the required density .

Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded

stone aggregate 40 mm nominal size) in pavements, laid to

required slope and camber in panels as required including

consolidation finishing and tamping complete.

Providing and laying design mix cement concrete of M-30

grade, in roads/ taxi tracks/ runways, using cement content as

per design mix, using coarse sand and graded stone

aggregate of 40 mm nominal size in appropriate proportions

as per approved & specified design criteria, providing dowel

bars with sleeve/ tie bars wherever required, laying at site,

spreading and compacting mechanically by using needle and

surface vibrators, levelling to required slope/ camber,

finishing with required texture, including steel form work with

sturdy M.S. channel sections, curing, making provision for

contraction/ expansion, construction & longitudinal joints (10

mm wide x 50 mm deep) by groove cutting machine,

providing and filling joints with approved joint filler and

sealants, complete all as per direction of Engineer-in-charge

(Item of joint fillers, sealants, dowel bars with sleeve/ tie bars

to be paid separately).

Note: - Cement content considered in M-30 is @ 340 kg/cum.

Excess/ less cement used as per design mix is payable/

recoverable separately.

Cement concrete manufactured in automatic batching plant

(RMC plant) i/c transportation to site in transit mixer

Digitally signed by

MANIKANTH MANIKANTH

Authorized Signatory of Contractor Page 14 of 18 RATHINASAMY RATHINASAMY NBCC

DSR - RATE (RS.) AMOUNT(RS.)

2021/ DESCRIPTION OF ITEM UNIT QTY

NO. DSR NS DSR ITEMS NS ITEMS

Providing and fixing pre-moulded joint filler in expansion

joints of RCC roads / CC pavements after making the joints depth

dust free with high pressure air jet cleaners, all complete as per

per direction of the Engineer-in-Charge. (Pre-moulded joint cm

fillers shall be made of bitumen hot sealing compound width

impregnated fibre board having impregnation more than per

35%, conforming to IS:1838 for fibre board and IS: 1834 for metre

hot sealing bitumen compound grade A.)

TOTAL OF RIOAD WORKS 16,91,939.05 -

2 FIRE PROTECTION WORKS

2.1 SEALING OF ELECTRICAL SHAFT

NS 2.1.1 Providing ans sealing the electrical shafts with 10 mm thick,

120 minutes fire rating, calcium silicate board made with

Calcareous & Siliceous materials reinforced with cellulose

fiber manufactured through autoclaving process to give stable

crystalline structure with minimum compressive strength 225

kg/ sq. cm, bending strength 100 kg/sq. cm , with 50 mm

thick non- combustible as per B.S. 476 part IV, 100%

humidity resistance and also having thermal conductivity

<0.043 w/mK. fixed to wall by 25 x 25 x 4 mm angle painted

with fire retardent paint all complete.

2.2 FIRE DOORS FOR SHAFT

Digitally signed by

MANIKANTH MANIKANTH

Authorized Signatory of Contractor Page 15 of 18 RATHINASAMY RATHINASAMY NBCC

DSR - RATE (RS.) AMOUNT(RS.)

2021/ DESCRIPTION OF ITEM UNIT QTY

NO. DSR NS DSR ITEMS NS ITEMS

NS 2.2.1 Supply of Red Merrandi wooden door frame of section 145

mm x 70 mm with heat activated intumescent fire seal strip of

section 10 mm x 4 mm (Astroflame / Abesco and one coat of

anti-termite fire retardant Primer and 55 mm thick asbestos

free composite fire / smoke check wooden shutters of 120

min. fire Rating confirming to BS;476 Part 22 & IS : 3614 Part

II comprising of two 9 mm thick Starpan Calcium Silicate

boards, a 100% without Asbestos, Brucite and Meerschaum,

having density not more than 1150Kg/M3 and thermal

conductivity 0.14 W/m*K sandwiching 31mm thick fire

resistance insulation filler faced with 3 mm thick commercial

ply facing on both side with heat activated intumescent fire

seal strip of size 10 mm x 4 mm (Astroflame / Abesco

mounted in the grooves of hardwood lipping on all sides

except bottom. The intumescent sealant shall be used to fill

the gaps between board and internal wooden lipping.

Digitally signed by

MANIKANTH MANIKANTH

Authorized Signatory of Contractor Page 16 of 18 RATHINASAMY RATHINASAMY NBCC

DSR - RATE (RS.) AMOUNT(RS.)

2021/ DESCRIPTION OF ITEM UNIT QTY

NO. DSR NS DSR ITEMS NS ITEMS

The single/double leaf doors shall be provided with vision

panels of minimum size 300 x 300 mm made out of 5 mm

thick clear fire rated glass (imported) for 120 minutes fire

rating of Firelite (Japan)/ Asahi ( Japan) / Schott from

(Germany) fully transparent in fire/non-fire conditions having

minimum 92% transparency with complete fire rated gasket

channel & moulding beading and filling the gap between

moulding /beading and glass with suitable sealant including

fixing each shutter with 4 Nos. stainless steel ball bearing

hinges of size 100mm x 76mm x 3mm with screws from

Marshall / Dorma's BB 4330 / Assa Abloy's Lockwood

range.The door frame and door shutters shall be painted with

fire retardant paint of 'BERGER / SUKRI' or equivalent to

provide Class 1 surface spread of flame conforming to BS

476 Part 7, IS : 12777 in desired shade over a coat of fire

resistant primer. The manufacturer should have tested the

entire assembly from CBRI Roorkee along with the fire rated

vision panels and hardware for achieving 2 hrs. fire rating and

shall submit the same for both single leaf and double leaf

configurations prior to manufacturing to the Engineer-in-

The rate includes the cost of all the materials, labor & T & P

required for proper completion of the item described above.

(For payment purpose the area of opening including door

frame shall only be measured). The agency shall provide one

number additional door along with all frame and fittings for

getting it tested from CBRI Roorkee as per required

standards ( items like glass vision panels shall be paid

separately under separate head.)

NS 2.3 Supply and fixing of 2hrs. fire rated CBRI tested as per IS

3614 Part -2 and BS 476 Part-22 mortice dead lock with

80mm cylinder having one side key from Ingersoll Rand's

Briton EL 2020 series / Dorma 288 series / Marshall MHLDL

Digitally signed by

MANIKANTH MANIKANTH

Authorized Signatory of Contractor Page 17 of 18 RATHINASAMY RATHINASAMY NBCC

DSR - RATE (RS.) AMOUNT(RS.)

2021/ DESCRIPTION OF ITEM UNIT QTY

NO. DSR NS DSR ITEMS NS ITEMS

NS 2.4 Supply and fixing of 2 hrs. fire rated CBRI tested as per IS

3614 Part -2 and BS 476 Part-22 stainless steel D-Type pull

handle of size 22mm dia and 300mm long from Dorma TGDI

series / Ingersoll Rand's -Briton Series/ Marshall make.

NS 2.60 Providing, installation, testing and commissioning of gun

metal valves of following sizes as required :

NS 2.6.2 Each flat electrical wiring rectification works - testing of each

circuit and its half of each flat (individual unit) Each 31 1,000.00 31,000.00

TOTAL OF FIRE PROTECTION WORKS - 10,23,568.00

TOTAL WORKS CARRIED OVER TO SUMMARY OF

Digitally signed by

MANIKANTH MANIKANTH

Authorized Signatory of Contractor Page 18 of 18 RATHINASAMY RATHINASAMY NBCC