Alteration to Partitions and other misc Works in CAO EB Cabin at 4 th floor of BSNL Bhawan Pan bazar Guwahati

Amount

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Credit for taking away unserviceable glass panels of small size / faded panels / broken pieces etc.

Credit for taking away unserviceable Paticle board panels of small size / damaged / worn out etc.

Credit for taking away unserviceable Aluminium section pieces of small length / damaged etc.

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

Note:- Aluminium hinges shall not be used in wooden shutters , Stainless steel hinges shall be preferred

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Refixing aluminium partition, doors, windows and ventilators with dismantled extruded built up standerd tubular section/appropriate Z sections , glass and particle boards fixing with dash fasteners of required dia. & size including necessary filling up of gaps at junctions i.e top, bottom & sides with available material but providing and fixing new screws, gaskets and pivots etc. complete for housing full/Half hight cabins, cubicles and partitions including refixing of recovered floor springs and door closers for doors complete as directed by Engineer-in-charge.

Shifting of Dismantled aluminium partition materaials of Aluminium extruded sections, Glass panels, prelaminated particle boards & miscellenious materials from the 2nd floor of the T E Building, Dispur to IV'th Floor of BSNL Bhawan building, cost including all lift and lead, handling with care to avoid any damage to the materialsas and transportation etc. complete all as directed by engineer in charge

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade.

Old work (one or more coats)

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Two coats.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work.

Attending repairs to wooden or Aluminium doors or windows by removing and attending repairs etc. Complete all as directed by the Engineer-in-charge.

Of size upto 2.50 Sqm

Attending repairs of Table drawers for easy and smooth operation etc. Including changing of required rollars / tracks etc. Complete all as directed by the Engineer-in-charge.

Attending repairs of Cuboard shutters including removing, repairing for easy and smooth operation etcand refixing, Including changing of required hinges etc. Complete all as directed by the Engineer-in-charge.

Of size upto 1.00 sqm

Cleaning Prelaminated partition board panels / glass panels with necessary cleaning acids or Soap chemicals or Glass cleaning solutions as directed by the Engineer-in-charge.

Providing and fixing Vertical Blinds are made up of distinct fabrics pane of good quality material and approved pattern with necessary fixtures and hangers etc. complete all as directed by the Engineer-in-charge.