REPAIRS AND REPAINTING OF STEEL FURNITURE AT UNIT LINES MD ACCN AND FURNITURE YARD OF BSO SOUTH UNDER GE SOUTH BANGALORE

Amount

ALMIRAH LARGE STEEL. Drg No : FD-1031, Removing existing unserviceable three way locking device and supply and fix three way locking device with cover for almirah large steel complete as shown on drgs and all as directed by the Engr in Charge

ALMIRAH SMALL STEEL. Drg No : FD-, 1032 Removing existing unserviceable three way locking device and supply and fix three way locking device with cover for almirah medium steel complete as shown on drgs and all as directed by the Engr in Charge

ALMIRAH LARGE/ SMALL STEEL(Applicable to items no 03 to 11). Drg No : FD-16,1031, 1032 Removing existing unserviceable lock and supply and fix new lock Make: Godrej/Link/Harrison of appropriate size, 6 levers with duplicate keys chromium plated or equivalent as suitable in almirah large/ medium steel as shown on drgs and all as directed by the Engr in Charge Notes : (i) Unit rate quoted shall include for provision/repairs to back plate, cover to key hole, back side cover, locking device etc. (ii) Removing the existing steel chromium plated handle and supply and fix new handles shall be measured and paid separately.

Removing existing unserviceable handle and supply and fix new chromium plated M S handle 125mm long to almirah large/medium steel as shown on drg and all as specified and directed.

Removing the existing unserviceable clamps for shelves and spot welding the shelves to almirah sides as directed and shown on drgs for almirah large/medium/small steel. Note:- Welding each shelf completely will be measured as a single unit.

Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on all external and internal surfaces of almirah large steel (Size 920 x 485 x 1985mm) including fixing new 3mm hard rubber pad in the bottom of legs ect complete all as specified and as directed by Engr-in-Charge.

Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on all external and internal surfaces of almirah medium steel (Size 760 x 440 x 1270 mm) including fixing new 3mm hard rubber pad in the bottom of legs ect complete all as specified and as directed by Engr-in-Charge.

Removing existing unserviceable/ damaged shelves for almirah large steel and supply and fix MS sheet CRC 1mm thick bent to shape and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the almirah all as specified and shown on drg.

Removing existing unserviceable/ damaged shelves for almirah medium steel and supply and fix MS sheet CRC 1mm thick bent to shape and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the almirah all as specified and shown on drgs.

Removing existing unserviceable/ damaged/ broken legs for almirah large and supply and fix new legs and applying one coat of red oxide primer including welding to the almirah all as specified and shown on drgs.

Removing existing unserviceable/ damaged/ broken legs for almirah medium and supply and fix new legs and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the almirah all as specified and shown on drgs.

TEAPOY VERANDAH Drg No : FD--255, FD-383 :(Applicable to items no 12 to 13). Removing existing unserviceable top and supply and fix new top of size 900x450mm x 18mm thick pre-laminated particle board of white colour with 3mm thick teak wood edging alround as directed, including painting the under side of table top with two coats of synthetic enamel paint (white) over a coat of primer all as shown on drg.

Supply and fix new hard rubber toes of appropriate size suitable to Teapoy verandah all as specified and shown on drawing as directed by Engr in Charge.

TABLE WITHOUT DRAWER FOR HAVs & ORs STEEL 900 X 600 X 760 MM WITH DRAWER Drg No : FD-1007, (Applicable to items no 14 to 16). Removing existing unserviceable top and supply and fix 18 mm thick particle board commercial exterior grade pasted with 1.5 mm thick plastic laminated sheet fixed on top as directed and shown on drgs.

Removing existing unserviceable/ damaged leg/ frame and replacing with new leg/frame of 25mm x 25mm square MS Tube 1.6 mm thick welded and applying one coat of red oxide primer including welding to the table all as specified and shown on drgs.

M & L for preparation of old surfaces of steel frame of table 900x600x760 mm one with coat of synthetic enamel paint as approved by Garrison Engineer all as specified and shown on drgs.

LOCKER STEEL(Built in) FD-1029(Applicable to items no 17 to 21). Material and labour for cleaning/preparing the existing surfaces of locker steel including inner and outer surfaces and applying one coat of synthetic enamel paint as approved by Garrison Engineer by spray process to achieve a uniform finish all as directed.

Removing existing unserviceable/ damaged/ broken legs for lockers steel and Supply & Fix new legs and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the locker and providing rubber pad 3mm thick for legs all as specified and shown on drgs

Removing the existing unserviceable/ damaged hanging rod and supply and fix new hanging rod 20 mm dia steel, cromium plated conduit pipe including provision of toe sockets at the end of hanging rod.

Removing unserviceable handle and supply and fix new chromium plated, MS handle 100 mm long to locker steel fixed to shutters all as specified and shown on drg.

Removing unserviceable Hasp and staple and supply and fix new cromium plated hasp & staple 75 mm long to locker steel all as specified and shown on drg.

TABLE OFFICE OFFICER STEEL FD-1002 (applicable to items No 22 to 24) Material and labour for cleaning/preparing the existing surfaces of table office officer steel including inner surfaces of drawers and applying one coat of synthetic enamel paint as approved by Garrison Engineer by spray process to achieve a uniform finish and to fix rubber toe for legs all as directed.

Removing existing unserviceable drawers of table office officer steel and supply and fix drawer made of MS sheet CRC 1mm thick bent to shape to its original position including lock Make: Godrej/Link/Harrison and applying one coat of synthetic enamel paint over one coat of red oxide primer all as specified and shown on drg.

Removing existing unserviceable top and supply and fix 18 mm thick particle board commercial exterior grade pasted with 1.5mm thick plastic laminated sheet fixed on top as directed and shown on drgs.

CHAIR TUBULAR STEEL WITH /WITHOUT ARMS Drg No : FD-75(M)(applicable to items No 25 to 31) Material and labour for painting to steel surfaces of chair tubular steel with Arms with one coat of synthetic enamel paint smoke grey shade all as and specified and directed.

Material and labour for painting to steel surfaces of chair tubular steel without Arms with one coat of synthetic enamel paint smoke grey shade all as and specified and directed.

Removing the existing unserviceable/ damaged seat from chair tubular steel with/without arms and supply and fix new seat all as shown on drg and as specified.

Removing the existing unserviceable/ damaged back from chair tubular steel with/without arms and supply and fix new back all as shown on drgs and as specified.

Removing existing unserviceable/ broken Arm rest and supply and fix new Arm rest of size 380x50x25mm -2 of 1st class hardwood made to shape and painted with two coats of black synthetic enamel paint for chair tubular steel with arms all as specified and shown on drgs.

Removing existing unserviceable rubber shoes from bottom of chair and supply and fix new hard rubber shoes to the bottom of chair all as specified and shown on drgs.

Removing existing unserviceable PVC/rubber plug from top of chairs and supply and fix new PVC/rubber plug to the top of chair all as specified and shown on drgs.

BOOK CASE STEEL. Drg No : FD-1028. (applicable to items No 32 to 35) Removing the existing unserviceable handle and supply and fix new steel handle 100 mm long to book case steel shown on drg and all as specified & directed.

Removing the existing unseviceable lock and supply and fix new lock with duplicate keys make Godrej all as specified and directed.

Removing existing unserviceable glass shutters and supply and fix new glass shutters to book case steel as shown on drgs and all as pecified.

Material and labour for Preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on all external and internal surfaces of book case steel as shown on drg and all as specified and directed.

BOOK SHELF OPEN LARGE STEEL FD-69 Material and labour for Preparation of old painted steel surfaces and applying one coat of synthetic enamel paint grey/olive green external shown on drg and all as specified and directed.

ALMIRAH LARGE STEEL 1/2 H X 1/2 S. Drg No : FD-1033. (applicable to items No 37 to 41) Removing the existing unserviceable three way locking device and supply and fix new three way locking device with cover for almirah large steel as shown on drg and all as directed by Engineer in Charge

Removing the existing unserviceable lock and supply and fix new Godrej lock of appropriate size, 6 levers with duplicate keys chromium plated suitable for almirah large/medium steel as shown on drg and all as directed by Engineer in Charge. Notes. (i) Unit rate quoted shall include for provision/repairs to back plate, cover to key hole, back side cover, locking device etc. (ii) Steel chromium plated handle shall be measured and paid separately under relevant items.

Removing the existing unserviceable handle and supply and fix new chromium plated MS handle, 125mm long to almirah large/ medium/ small steel as shown on drg and all as specified & directed.

Removing the existing unserviceable clamps for shelves and spot welding the shelves to almirah sides as directed and all as shown on drgs for almirah large/medium/small steel. Note. Welding each shelf completely will be measured as a single unit.

Material and labour for Preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on all external and internal surfaces of almirah large steel (Size 920 x 485 x 1985mm) and to fix 3mm hard rubber pad in the bottom of legs all as pecified and directed.

Charpoy MS Square JCOs/NCOs. Drg No : FD/MAP/II/01. Removing the existing plywood from charpoy MS Sqaure NCO's and preparing the old painted steel surfaces, applying one coat of synthetic enamel paint colour black on all external and internal surfaces including refixing/fixing the plywood on charpoy, etc complete all as specified and directed. Note : New plywood incorporated will be masured and paid seprately as supply only under relevant item.

Charpoy MS Square JCOs/NCOs. Drg No : CECZ/TD/726. Removing the existing plywood from charpoy MS Sqaure JCO's and preparing the old painted steel surfaces, applying one coat of synthetic enamel paint colour black on all external and internal surfaces including refixing/fixing the plywood on charpoy, etc complete all as specified and directed. Note : New plywood incorporated will be masured and paid seprately as supply only under relevant item.

BED HARD TOP MS SQUARE FOR OFFICERS: FD/E6/MAP/08 Removing the existing plywood from charpoy MS square Officers and preparing the old painted steel surfaces, applying one coat of synthetic enamel paint colour black on all external and internal surfaces including refixing/fixing the plywood on charpoy,MS square etc complete all as specified and directed. Note : New plywood incorporated will be masured and paid seprately as supply only under relevant item.

Supply only new plywood BWR Grade ISI marked of size 1980 mm x 900 mm x 12 mm and fixed with headless MS nut & bolt 6 mm dia 75 mm length with washer etc all as directed by the Engr-in-charge

Vivek Engineers

Global Furnisherts