Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.0 LAdmitted-Finance | ₹47.0 L | L1 | Admitted-Finance |
| 2 | L2₹49.6 LAdmitted-Finance 17 JAIN NAGAR TALAB TILLO JAMMU JAMMU KASHMIR 180002 | JAMMU | JAMMU AND KASHMIR | 180002 | ₹49.6 L | L2 | Admitted-Finance |
| 3 | L3₹49.9 LAdmitted-Finance | ₹49.9 L | L3 | Admitted-Finance |
| 4 | L4₹50.5 LAdmitted-Finance | ₹50.5 L | L4 | Admitted-Finance |
| Sl No | Description | Qty | Unit | AVG Contracts and Supplies pvt ltd L2 | Satinder Gupta L3 | M/S JASWINDER SINGH L4 | AMIT SHARMA L1 |
|---|---|---|---|---|---|---|---|
| 1.00Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. | |||||||
| 1.10 | All kinds of soil. | 3.9 | Cum | 189 ₹737.10 | 100 ₹390 | 220 ₹858 | 201 ₹783.90 |
| 2.00Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | |||||||
| 2.10 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 13.85 | Cum | 3,500 ₹48,475 | 5,500 ₹76,175 | 5,000 ₹69,250 | 4,000 ₹55,400 |
| 2.20 | 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | 7.45 | Cum | 2,646 ₹19,712.70 | 5,000 ₹37,250 | 3,600 ₹26,820 | 3,500 ₹26,075 |
| 2.30 | 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) | 2.55 | Cum | 1,890 ₹4,819.50 | 4,000 ₹10,200 | 3,100 ₹7,905 | 2,800 ₹7,140 |
| 3.00Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : | |||||||
| 3.10 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | 1.95 | Cum | 3,906 ₹7,616.70 | 6,500 ₹12,675 | 6,000 ₹11,700 | 5,000 ₹9,750 |
| 4.00Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : | |||||||
| 4.10 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | 3.88 | Cum | 4,500 ₹17,460 | 6,800 ₹26,384 | 5,000 ₹19,400 | 6,500 ₹25,220 |
Updated dates
Tender Value
₹59.9 L
EMD Value
₹1.2 L
Closing Date
15 Dec 2025, 4:00 pmClosed
Estates Officer, SKUAST-Jammu
Estates Division, SKUAST-Jammu, Main Campus, Chatha
Upgradation and Maintenance of Academic and Administrative buildings of SKUAST-Jammu (by way of civil, sanitary and electrification repair works) to Administration building and Sports Complex at Faculty of Agriculture at Main Campus Chatha
2025_SKUST_296197_1
AU/Estates/2025-26/18 dated 20-11-2025
Open Tender
Civil Works
180 days
Main Campus, Chatha
Please refer tender documents
4 documents required · 4 mandatory
₹2,000
Assistant Comptroller (Estates), SKUAST-Jammu
₹1.2 L
9 Jan 2026
24 Nov 2025
16 Dec 2025
24 Nov 2025
15 Dec 2025
24 Nov 2025
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete.
Foundations, footings, bases of columns, etc. for mass concrete.
Suspended floors, roofs, landings, balconies and access platform.
Shelves (Cast in situ)
Edges of slabs and breaks in floors and walls
Under 20 cm wide
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.
Cold twisted bars
Providing and filling in position bitumen mix filler of Proportion 80 kg of hot bitumen, 1 kg of cement and 0.25 cubic meter of coarse sand for expansion joints.
Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
Cement mortar 1:6 (1 cement : 6 coarse sand)
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in.
cement mortar 1:4 (1 cement : 4 coarse sand)
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Granite of any colour and shade
Area of slab over 0.50 sqm
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.
Second Class deodar wood. (35 mm thick shutters)
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws:
35 mm thick shutters.
with ISI marked M.S. pressed butt hinges bright finished of required size - Second class deodar wood
Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete :
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
Providing and fixing aluminum handles ISI marked (powder coated) with necessary screws etc. complete :
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete.
Providing and laying vitrified floor tiles (Size 600x600 mm) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete
15 mm cement plaster of mix:
1:6 (1 cement: 6 fine sand)
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
One or more coats on old work.
Distempering with 1st quality acrylic/oil bound washable distemper (ready mixed)having VOC content less than 50 gms/litre, one or more coats on old work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications
Finishing walls with Acrylic exterior paint of required shade : :
Old work (One or more coats applied @ 0.90 ltrs/10 sqm).
Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead
With cement mortar 1:4 (1 cement : 4 fine sand)
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:
1:4:8 or leaner mix (i/c equivalent design mix)
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:
In cement mortar
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.
For thickness of tiles 10 mm to 25 mm
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.
White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
W.C. pan with ISI marked white solid plastic seat and lid.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Flexible pipe
32 mm dia
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall.
15 mm dia. nominal bore (Medium)
20 mm dia. nominal bore (Medium)
25 mm dia. nominal bore (Medium)
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
15 mm nominal bore
20 mm nominal bore (Medium)
25 mm nominal bore (Medium)
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Circular tank
Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
15 mm nominal bore.
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (medium duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete
300 mm dia. R.C.C. pipe
150 mm dia. R.C.C. pipe
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
For fixed portion
Powder coated aluminium (minimum thickness of powder coating 50 micron)
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).
Powder coated aluminium (minimum thickness of powder coating 50 micron)
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer?in-charge. (Cost of aluminum snap beading shall be paid in basic item.)
With float glass panes of 5.0 mm thickness
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin- plate etc. complete as per the direction of Engineer-in-charge.
With Stainless Steel cover plate minimum 1.25 mm thickness.
Providing and fixing brass 100 mm mortice latch and lock with 6 levers without pair of handles of approved quality for aluminium doors including necessary cutting and making good etc. complete
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment)
Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and de chocking of sewer lines. De-chocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm
Providing and fixing ACP in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .
Providing and fixing PVC pipe of approved make with necessary accessories etc. complete (100 mm)
Providing and fixing following sanitary items:-
C.P. brass isnk/wash basin mixer
C.P. Jali
PVC connection
waste coupling
Removal of vegetation from walls and roof tops
Providing and fixing High Pressure Laminate (HPL) sheet of approved shade, texture and pattern, minimum 6 mm thick exterior grade, conforming to IS 2046/IS 1328, fixed over aluminium or M.S. framing with self drilling stainless steel screws and caps or as per manufacturer's specifications, including cost of all labour materials, scaffolding etc. complete in all respects as per the direction of Engineer in charge.
Providing and fixing PVC panelling of approved shade
Supply and fixing of following modular switch/socket on the existing modular plate and switch box including connectiont testing etc as reqd.
5/6 Ampere switch
5/6 Ampere socket
15/16 Ampere switch socket
Supply and fixing of following modular base and cover on plate on the existing modular metal boxes etc as reqd.
3 module
8 module
12 module
16 module
Supplying and drawing of following sizes of FRLS PVC insulated copper conductor single core cables in the existing surface/recessed etc.
3x1.5 sqmm
3x2.5 sqmm
3x4.0 sqmm
3x6.0 sqmm
Providing and fixing 6 amps to 32 amps rating 240 volts, 'L' series, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as reqired (category B)
Single Pole -6 to 32 A
Triple Pole and neutral 40 A
Triple Pole and neutral 63 A
40 amps SPN
63 amps SPN
Supply and fixing of following phenolic laminated sheet inlcuding dismantling of existing sheets.
Supply and fixing 1x20 watt LED Tubelight fixture including dismantling of existing with connection testing etc as reqd
Supply and fixing 1x36 watt LED Tubelight fixture including dismantling of existing with connection testing etc as reqd
Supply and fixing of 18 Watt LED surface light fixture including dismantling of existing complete with all accessories including connection testing etc as reqd.
Supply and fixing of 18 Watt LED concealed light including dismantling of existing complete with all accessoreis including connection testing etc as reqd.
Supply and fixing of 2'-0" x 2'-0" 36 watt LED surface light fixture including dismantling of existing complete with all accessories including connection testing etc as reqd.
Supply and fixing of 70 Watt LED street light fixture complete including connection testing etc as reqd.
Supply and fixing of 45 Watt LED street light fixture complete including connection testing etc as reqd.
Supply and fixing of 8 way gang box complete with connection testing
Earthing with GI earth plate 600mm x 600 mm x 6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) complete as required for earthing and lightning protection.
Providing and fixing 25 mm x 5mm GI strip in 40 mm dia G.I. pipe from earth electrode as required
Supply and fixing of following rating and breaking capacity with thermo magnetic release and terminal spreaders in the existing cubical panel board including drilling holes in the cubical panel making connection.
200 Amp 36 KA FPMCCB
250 Amp 36 KA FMCCB
125 Amp 16 KA FMCCB
Supply and fixing of the following way, single pole and neutral / three pole and neutral, sheet steel, double door, phase segregation type, MCB distribution board, 230V / 415V on surface/recess, complete with tinned copper bus bar, neutral bus bar and link, earth bar, din bar, detachable gland plate, interconnections, including painting, earthing, etc., as required.
8 way TPN
12 way SPN
4 way TPN
Rewiring for light / fan / exhaust fan / call bell point with 1.5 Sq mm FR PVC insulated copper conductor cable in surface / recessed ISI marked PVC conduit with modular switch, modulr plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc. as required.
Wiring for sub main wiring with 4x10 sqmm alongwith 1x6 sqmm earth wires sizes of PVC/ insulated copper conductor side core conductor in the surface/ recessed PVC conduit etc as reqd.
Wiring for sub main wiring with 4x16 sqmm alongwith 2x10 sqmm earth wires sizes of PVC/ insulated copper conductor side core conductor in the surface/ recessed PVC conduit etc as reqd.
Wiring for sub main wiring with 2x6 sqmm alongwith 1x6 sqmm earth wires sizes of PVC/ insulated copper conductor side core conductor in the surface/ recessed PVC conduit etc as reqd.
Supply and fixing of 250 mm x 300 mm x 100 mm deep size metal box with suitable size phenolic laminated sheet cover in the front including connection testing etc as reqd.
Supply and fixing two stepped type up electronic fan regulator on the existing sheet switch box including connecting testing etc. as required.
Supply and fixing of exhaust fan 300 mm sweep heavy duty trans air one star rating inlcuding connection testing etc as reqd.
Supply and fixing Call bell / buzzer DC / AC single phase 230 V complete
Supply and fixing of 20 Amp industrial socket with 32 Amp SPN including connection, testing, etc. as required
Supply and fixing of 25 mm dia PVC conduit alongwith accessories in surface/recess.
Supply and fixing of 32 mm dia PVC conduit alongwith accessories in surface/recess.
Supply and laying of 10 mmx2C aluminium all weather wire including connectiont testing etc as reqd.
Rewinding of ceiling fan 1200 mm sweep including connection testing etc as reqd.
Supply and fixing of 1200 mm sweep ceiling fan 1 star rating inlcuding connection testing etc as reqd.
AVG Contracts and Supplies pvt ltd (BID ID -2663220)
Satinder Gupta (BID ID -2670684)
M/S JASWINDER SINGH (BID ID -2669629)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.28 MB
TermsandConditionsoftheContract.pdf
Tender Documents • 0.21 MB
BOQ_959493.xls
BOQ • 1.21 MB
Download all tender documents and submit your bid