Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.4 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹32.0 L+₹1.6 L (5.10%)Rejected-AOC 62 B P J N MUKHERJEE ROAD GUSURI HOWRAH 711107 | HOWRAH | HOWRAH | WEST BENGAL | 711107 | L2 | Rejected-AOC REJECTED | |
| 3 | L3₹33.2 L+₹2.8 L (9.32%)Rejected-AOC 76 A H 19 1 RAJA RAMMOHAN SARANI KOLKATA 700009 | KOLKATA | KOLKATA | WEST BENGAL | 700009 | L3 | Rejected-AOC REJECTED | |
| 4 | L4₹34.3 L+₹3.9 L (12.8%)Rejected-AOC | L4 | Rejected-AOC REJECTED |
| Sl No | Description | Qty | Unit | B.K. ENGINEERING WORKS L4 | LOKENATH ENGINEERING WORKS L2 | Madheshiya Marines L3 | FRENCH ENTERPRISE L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Vessel to be blocked and unblocking . | 1 | Job | 1,05,000 ₹1,05,000 | 50,000 ₹50,000 Lowest | 50,000 ₹50,000 Lowest | 1,80,000 ₹1,80,000 |
| 2.00 | Ultrasonic gauging to be done to assure the actual thickness of Bottom, side hull and Deck plate. | 300 | Points | 60 ₹18,000 | 40 ₹12,000 Lowest | 75 ₹22,500 | 90 ₹27,000 |
| 3.00 | Corroded, holed & thinned down plates, structural members,etc. to be cropped & renewed –
Vessel hull plate – 4.14 MT
Deck – 7.42 MT
Aft Cantilever portion and structural members-1.3MT
Toilet and Kitchen wall plate and inside members-0.3MT
Rudder room bottom -01MT
Manhole door -0.180MT, Passenger seating structure-0.6MT | 14.94 | M.T. | 1,30,000 ₹19,42,200 | 1,25,000 ₹18,67,500 | 1,14,000 ₹17,03,160 | 16,500 ₹2,46,510 Lowest |
| 4.00 | Steel fender 200 NB, 8 MM thick half cut pipe stiffened with ‘D’ shaped stiffeners 500 mm apart. | 45 | Mtr. | 4,350 ₹1,95,750 | 1,750 ₹78,750 Lowest | 3,500 ₹1,57,500 | 3,000 ₹1,35,000 |
| 5.00 | Corroded and thin down twin bollards to be renewed by 150NB pipes. | 4 | Nos. | 4,200 ₹16,800 Lowest | 6,500 ₹26,000 | 12,000 ₹48,000 | 6,500 ₹26,000 |
| 6.00 | Corroded and thin down Single bollards to be renewed 150NB pipe. | 8 | Nos. | 3,000 ₹24,000 Lowest | 5,000 ₹40,000 | 8,000 ₹64,000 | 6,500 ₹52,000 |
| 7.00 | Corroded and thin down railing post (65NB) to be renewed. | 22.5 | Mtr. | 1,500 ₹33,750 | 1,200 ₹27,000 | 1,000 ₹22,500 Lowest | 3,500 ₹78,750 |
| 8.00 | Corroded and thin down railing pipe (25NB) to be renewed. | 40 | Mtr. | 750 ₹30,000 | 650 ₹26,000 | 350 ₹14,000 Lowest | 2,500 ₹1,00,000 |
| 9.00 | Damaged wooden door replace by new WPC door including all securing arrangement at wheel house and crews cabin. | 2 | Nos. | 7,500 ₹15,000 | 10,000 ₹20,000 | 5,000 ₹10,000 Lowest | 13,000 ₹26,000 |
| 10.00 | Both side hydraulic gear box require to be full overhauling.(Spare will be supplied by WBSTC) | 2 | Nos. | 12,500 ₹25,000 Lowest | 21,000 ₹42,000 | 35,000 ₹70,000 | 38,000 ₹76,000 |
Tender Value
₹36.6 L
EMD Value
₹73,200
Closing Date
28 Jul 2025, 2:00 pmClosed
JT. MANAGING DIRECTOR
37, D P S ROAD, KOLKATA - 700001
BLOCK REPAIR AND PAINTING OF VESSEL M.V.MOTIJHEEL
2025_WBSTC_875937_1
WBSTC/JMD/MARINE/NIT-08e/25-26
Open Tender
MECHANICAL
Item Rate
90 days
CTO MARINE, MILLENNIUM PARK
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
₹73,200
11 Sept 2025
14 Jul 2025
30 Jul 2025
14 Jul 2025
28 Jul 2025
14 Jul 2025
Amount
Vessel to be blocked and unblocking .
Ultrasonic gauging to be done to assure the actual thickness of Bottom, side hull and Deck plate.
Corroded, holed & thinned down plates, structural members,etc. to be cropped & renewed – Vessel hull plate – 4.14 MT Deck – 7.42 MT Aft Cantilever portion and structural members-1.3MT Toilet and Kitchen wall plate and inside members-0.3MT Rudder room bottom -01MT Manhole door -0.180MT, Passenger seating structure-0.6MT
Steel fender 200 NB, 8 MM thick half cut pipe stiffened with ‘D’ shaped stiffeners 500 mm apart.
Corroded and thin down twin bollards to be renewed by 150NB pipes.
Corroded and thin down Single bollards to be renewed 150NB pipe.
Corroded and thin down railing post (65NB) to be renewed.
Corroded and thin down railing pipe (25NB) to be renewed.
Damaged wooden door replace by new WPC door including all securing arrangement at wheel house and crews cabin.
Both side hydraulic gear box require to be full overhauling.(Spare will be supplied by WBSTC)
Port side Heat exchanger renewals with modification of pipe line work to be done. (Heat exchanger to be supplied by WBSTC)
Semi–Rotary hand pump (No.-5) for emergency bilge suction and HSD line requires to be renewed.
23nos. Bilge, Fire,Main sea and HSD line valves are to be dismantled, repaired, pressure tested & fitted back including spare and machine shop work if required.
Hydraulic control system required to be overhauling including machining and renewal of defective parts. i.e. Actuator and pump.
DG set foundation and radiator cooling system require to be modified.
Propeller Shaft & Rudder arrangements including all bushes are to be dismantled and fitted back after necessary repair.
Both the Propellers (Mn-Bronze) are to be renewed.
Propeller shaft worn out journals metalizing by S.S. Electrode & machining to suit with the respective bushes and trueness to be checked & rectified.
Rubber cutlass bushes are to be re-rubberised
Propeller and coupling bed-in with the respective propeller shaft.
Propeller shaft key (S.S) renewal with securing screw.
Gland bushes & gland covers (G.M.) are to be re-sleeved – 02 sets
Propellers & couplings are to be bed-in with the respective propeller shaft
Both the rudder stock worn out journals are to be metalized & machined.
Rudder stock upper & lower GM bush & gland covers are to be re-sleeved -02 sets
Rudder blade securing S.S. bolts & nuts (fitted type) are to be renewed
Entire vessel external and internal surfaces along with inside frame work, bulkheads, cabin, deck fittings, railing etc. to be thoroughly chipped, scrapped, cleaned and painted internally and externally as per enclosed painting schedule
Engine room and rudder hold bilge suction line and main engine sea water cooling line opening, cleaning, pressure testing and fitment.
Damaged bilge pipe (50 NB) to be renewed
Engine room strainer and bilge to be cleaned thoroughly and the floor plate to be fitted in position after painting.
Crews’ cabin, master cabin and wheel house inside plywood paneling alongwith necessary wooden batons & bits to be renewed.
LOKENATH ENGINEERING WORKS (BID ID -6759891)
Madheshiya Marines (BID ID -6773828)
B.K. ENGINEERING WORKS (BID ID -6728059)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .