Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.8 LAccepted-AOC SR NO 165 OPPOSITE YASH HOSPITAL DP ROAD MALWADI PUNE MAHARASHTRA 411028 | PUNE | MAHARASHTRA | 411028 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹43.3 L+₹4.5 L (11.7%)Rejected-Finance | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹43.9 L+₹5.1 L (13.1%)Rejected-Finance FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L3 | Rejected-Finance NOT BEING LOWEST |
Tender Value
Refer Docs
EMD Value
₹97,000
Closing Date
15 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R AND D GIRINAGAR PUNE 411025
GE I R AND D GIRINAGAR PUNE 411025
SPL REPAIRS TO OFFRS MD ACCN NO P-171 1 171 2 171 3 171 4 EXCLUDING SERVANT QTRS AT MILIT GIRINAGAR PUNE 25
2023_MES_628398_2
GE I R AND D GNR TOKEN 72 OF 2023-2024
Open Tender
Civil Works
Works
120 days
GE I R AND D GIRINAGAR PUNE 411025
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE I R AND D GIRINAGAR PUNE 411025
₹97,000
12 Apr 2024
20 Dec 2023
17 Jan 2024
20 Dec 2023
15 Jan 2024
26 Dec 2023
20 Dec 2023 - 26 Dec 2023
Amount
B/R PORTION Complete removal of entire existing water proofing treatment in any position, any thickness including tarfelt, Plaster, lean concrete, gravels etc. and removing the debries of demolished material out side MD land complete all as specified and directed.
M&L for plain cement concrete1:2:4 type B1, (using 20mm graded stone aggregate) as in kerb or mud stop, slightly rounded or champhered on edges complete all as specified and directed.
M&L for plain cement concrete 1:2:4 type B 0 (using 12.50 mm graded stone aggregate) 25 mm thick complete all as specified and as directed.
M&L for 10 mm thick rendering in CM 1:4 over concrete surfaces mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed. Note: Water Proofing compound shall be measured and paid for seprately as "Supply Only" under relevant item of this BOQ.
Supply only WPC of approved make all as specified and as directed.
M&L Acrylic emulsion polymer of acrylic single component low viscosity polymer for preventing leakages over exisitng/New surface of slab, terrace, exterior, interior wall, Chajjas etc as per following procedure :- (a) Surface & surface preparation : Remove all the loose particles , dirt & dust clean by water , wire brush & mechanical cleaning , grease & oil should be cleaned using solvents, If the surface is previously coated with tar, it should be thoroughtly scraped off. The surface should be dry before application . All the cracks and crevices in the concrete slab to be filled with polyurethene based sealent with and including application of PU based primer all as directed by Engr-in-Charge. (b) Finish paint : Apply water based polyurethenene modified dispersion (single component cold applied ,non toxic,VOC complaint)in 03 coats icluding 01 coat of primer of same materials after dillution of water at 50 % or specific primer matching same material as per manufacturers specificationand as dircted by EIC/GE Make:-Bostic,Berger,Fosroc,Sika,Asian,or any other make approved by E-in-C'sBranch for PU based water proofing treatment.
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing demolished material from site all as specified and directed.
Demolition of Brickwork or stone masonary built in Cement mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and removing demolished material from site complete all as specified and directed.
Taking down chowkats or frame of wooden or steel not exc 1.5 Sqm with shutters (without taking of shutter from the frame) complete all as specified and directed.
Taking down shutters of any description but exc. 1 Sqm and n exc.2 Sqm each complete all as specified and as directed.
Taking down chowkats or frames of wooden or steel exc 1.5 sqm & n.exc. 4 Sqm with Shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off outside MD land all as specified and directed.
M&L for Brickwork with flyash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
M & L for Rendering 10 mm thick of fair faces of brick work or concrete work in CM 1;6. finished even and smooth without using extra cement complete all as specified and directed.
M & L rendering 15mm thick on brick wall or concrete surface consisting two layers, under layer of 10mm thick in CM (1:6) & top layer of 5mm thick in cement mortar 1:4 mixed with water proofing compound @ 3% by weight of cement, finished even and smooth without using extra cement complete all as specified and directed. Note:- Water proofing compound shall be measured and paid saperately as 'Supply only' under relevant item of this BOQ.
M&L 5 mm thick rendering in CM 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and directed.
M&L for applying two coats of oil bound distemper over a coat of primer on old surfaces of wall including preparation of surface of wall complete all as specified and as directed.
M&L for two coats of oil bound distpemper over a coat of primer on new surfaces of wall including preparation of plastered surface of wall complete all as specified and as directed.
M&L for two coats of oil bound distpemper over a coat of primer on new surfaces of ceiling including preparation of surface complete all as specified and as directed.
M&L for preparation of surfaces and applying 2 mm thick wall care putty (water proofing ) on old/new wall surface internally or externally complete all as specified and directed by Engr-in-charge
M&L for complete removal of existing paint and applying two coats of oil bound distemper over a coat of primer on old surfaces of ceiling complete all as specified and directed.
M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/Litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance exterior paint of required shed (Company Depot Tinted) with silicon additives @ 1.43 Litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 Lit/sqm over new/old surfaces including complete removal of existing paint by bio wash, necessary scaffolding required for painting work, safety measures etc complete all as specified and directed
M&L for 75mm thick PCC 1:3:6 type C2 (using 20mm graded stone aggregate) as in plinth protection complete all as specified and as directed.
S & F IInd class hard wood 35mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass,gauge,etc.edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass,etc; size of members of shutters as specified in SSR Part I Sectin 8, clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed.
S&F Flush shutter solid core 35 mm thick with block board core and plywood face panels commercial type on both side with lipping/frame to match complete all as specified and directed.
S&F Flush shutter solid core 35 mm thick with block board core and plywood face panels commercial type on both side and one face is covered with decorative face veneer with lipping / frame to match complete all as specified and directed by Engr-in-Charge.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm & fixed with stainless steel wire staples complete all as specified and directed.
M&L for Preparation of new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S& F 2nd Class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.
M&L for 50mm cupboard magnet including high quality magnet and steel plate complete all as specified and directed.
S&F in repairs 18mm thick prelaminated particle board interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets etc fixed with screw including 3mm thick, 1st class HW(TW) beading all around on edging to timber frame work all as specified and directed by Engr-in-Charge.
S&F continuous (Piano) hinges mild steel bright finished or electro galvanised width of flap 30mm complete all as specified and directed.
S&F 125mm cupboard handles fixed with nuts screws and washer of aluminium anodised complete all as specified and directed.
S&F Hasp and staples safety type aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws of 125mm size complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per manufacturer's instructions complete all as specified and directed.
M&L for door viewers eye brass 75mm complete all as specified and directed.
S & F butt hinges medium weight cold rolled mild steel size of hinges 100 mm complete all as specified and directed.
S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 250 mm complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified and directed.
S&F aluminium handles, anodised, cast type, of size 150 mm complete all as specified and directed.
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F for 140 mm long brass body and tongue with hard drawn steel spring door stopper fixed to door bottom rail complete all as specified and directed.
S&F 150mm brass handles, cast type, polished bright complete all as specified and directed.
S&F 200mm long decorative brass barrel tower bolts, with cast or sheet barrel and rolled and cast bolts fixed complete all as specified and directed.
S&F 300mm, Brass ordinary rat tail rod pattern springs including roller and roller plate including fixing to door complete all as specified and as directed.
S&F in repairs readymade 9 feet pulley operated cloth drying system, aluminium anodised 22mm outer dia pipe, channel assembly, locking system to hide rope knot, ropes 4mm dia HDPE double core & fitting material etc. complete all as specified and directed. Make:Easy dry or equivalent and approved by EIC.
S&F in repair Stainless steel fancy chromium plated 25mm dia as in curtain rods all as specified and directed.
S&F Stainless steel chromium plated brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc. complete all as specified and directed.
S&F stainless steel chromium plated 6 Pin, 45Cm to 60Cm long hanger fixed to wall with screws complete all as specified and as directed.
S&F three track sliding window with 4mm thick tinted glass in two shutter and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing including good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge and including taking down old steel windows. Series of aluminium section as per Jindal is (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. complete all as specified and as directed.
S&F anodised powder coated (thickness of powder coating not less than 50micron) aluminim window and ventilator shutters, with lauvers type with aluminium up and down track, aluminium section weight not less than 0.55kg/mtr including necessary joining cleats, glazing clips, rubber packing, screws etc. complete all as specified & directed.
M&L for 4mm thick figured glass, pin head type and glazing with not exc 0.5Sqm in each pane to aluminium frame work for ventilators complete all as specified and as directed.
M& L for Silicon sealant for sealing of existing window aluminium frame with penetration depth 10 mm and 10 mm wide using sealant gun finished in triangular shape complete all as specified and as directed.
M&L Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290.Gde-E-165 complete all as specified and directed.
Dismantling plain or corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof covering complete all as specified and directed.
S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of red oxide on new/old steel surfaces exc.10 cm width or girth etc.complete all as specified & directed.
M&L for roughening surfaces of old concrete floor of sunken portion by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3Kg/sqm complete all as specified and directed.
M&L for Rendering 10mm thick in CM 1:4 on concrete surfaces mixed with WPC @ 3% by weight of cement and finished even and smooth using extra cement and applying two coats of Roff Hyguard EX Rezone Chemicals or equivalent make complete all as specified and as directed.
M&L for PCC 1:5:10 type E-2 (using 40mm graded brick aggregate) lean concrete for filling sunken floor complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises complete all as specified and directed.
M & L for 25mm thick plain cement concrete type 1:2:4 B-1 (using 20mm graded stone aggregate) as in sub base or levelling course complete all as specified and directed.
M&L for Non skid, ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 Sqm coloured tiles, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed.
S&F, glazed ceramic tiles coloured 450 x 350mmx 7-8 mm thick in wall/dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match complete over & including rendering 15 mm thick in CM 1:6 on stone masonry surfaces or surfaces other than fair face of brick work / concrete surfaces complete all as specified and directed.
M&L for coloured glazed ceramic highlighter tile of size 450 x 350mm x 7 to 8mm thick, colour and pattern as approved by GE, as in vertical surface set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick screed bed in cement mortar 1:3 etc complete all as specified & as directed.
M&L for coloured glazed vitrified ceramic tiles double charged 10mm thick (square/Rectangular) polised, area of each tile not exceeding 0.36 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 20mm thick screed bed in CM 1:6 all as specified and directed by Engr-in-Charge.
M&L for coloured glazed vitrified ceramic tiles double charged 10mm thick (square/Rectangular) polised, as in skirting, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 10mm thick backing coat in CM (1:3). all as specified and directed by Engr-in-Charge.
M&L for mirror polished Kota stone slab 20-25mm thick in tread of steps in single pieces incl two numbers of grooves of size 3mmx3mm and rounding to edge, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing with and incl 10mm thick screed in CM(1:4) complete all as specified and directed by Engr-in-charge.
M&L for mirror polished Kota stone slab 20-25mm thick in riser or skirting of steps in single pieces laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and mirror polishing with and including 10mm thick screed in CM(1:4) complete all as specified and directed by Engr-in-charge.
S & F in repairs Machine cut cuddappa stone slab one side polished 20 to 25mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 20mm screed bed in cement mortar (1:6) complete all as specified and directed.
M & L in repairs for granite 18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Rounding edges of stone one edge, such as in steps, cooking platform, window cill and other similar situation complete all as specified and directed.
Taking up or down steel tubing 15mm bore and connections including removing from site complete all as specified and directed.
All as per item 74 above but 20 mm bore pipe complete all as specified and as directed.
S&F Gun metal globe or gate valve with iron wheel head screwed both ends size 20mm for iron pipe, fixed complete all as specified and directed.
S&F for 20mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 20mm bore pipe on walls/ceiling or laying in floors and including 20 to 15mm dia fittings for fixing of sanitary fittings complete all as specified & directed. Make :- Prince/Astral/Plasto or equivalent in specified makes as approved..
All as per BOQ item no 77.00 here in befor but 15/16 mm complete all as specified & directed.
M&L for cutting chases, pinning in stone, concrete block walls making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good the disturbed surfaces to match with existing finishes complete all as directed.
S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S & F in repairs vitreous china wash down water closet pan Pedestal 'P' trap any colour including fixing bolts etc including PVC seat cover white with flat PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc complete all as specified and direcrted.
S&F in repairs vitreous china wash hand basin pedestal type, white, 550x 400mm flat back including providing CI brackets, PVC waste pipe 32mm dia, CP brass waste coupling 32mm dia etc, 15mm bore CP fancy type pillar tap complete all as specified and directed.
S & F stainless steel grating doom 125 mm dia complete all as specified.
S&F in repairs Chromium Plated Toilet Paper Holder complete all as specified and as directed
S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf corner type three tyres with chromium plated brackets, bracket guard and railing 30cm size incl screws complete all as specified and directed.
S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated brackets, bracket guard and railing 60 cm long size incl screws complete all as specified and directed. Make:- Jaguar / Cera or equivalent in specified makes as approved.
S&F in repair 125mm chromium plated shower roses with shower arm with or without swivel joints, any size including fixing to uPVC/Steel pipe complete all as specified and as directed.
S&F in repairs Hand shower (health faucet) (ABS Chromium plated) with 8mm dia, 1.2mtr long flexible tube and wall hook complete all as specified and as directed. Make:- Jaguar / Cera or equivalent in specified makes as approved.
S&F 15mm dia bore, two way bib tap, long body, fancy type, brass chromium plated, with crutch handle, screwed down for PVC/iron Pipe complete all as specified and directed.
S&F in repair sinks made of stainless steel 1mm thick kitchen with plugs, washers and waste coupling; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including waste pipe complete all as specified and as directed.
S&F in repairs Brass CP mixer including connection pipes for mixing hot or cold water screwed down for UPVC/iron/cPVC pipe and fixed complete complete all as specified and as directed. Make:- Cera / Hindware / Jaguar or equivalent in specified makes as approved.
M&L for 100mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F in repairs Bib taps long body fancy type chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as directed.
S&F in repair fancy type, chromium plated angular stop cock fixed with wall flange for 15mm bore of pipe complete all as specified and as directed.
S & F in repairs PVC connection 45 cm long 15 mm bore with 2 Nos PTMT check nuts complete all as specified and directed.
S&F in repairs brass chromium plated tubular towel rail 20mm dia including brackets both side complete complete all as specified and as directed.
S&F brass chromium plated bracket for towel rail complete all as specified and as directed.
S & F in repairs soap dish chromium plated of size 100 x 100 mm any type, fixed with chromium plated brass screws complete all as specified.
Supply & fixing in repairs stainless steel plate rack, made out of 1.00mm thick sheet of size 75 cm x 75 cm complete all as specified and directed.
M&L for provided reinforced cement concrete pipe 150mm bore class NP-2 with collars laid and jointed with cement all as specifed and directed .
M&L for concrete bed to drain pipes including pipes under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 for 150mm dia pipe complete all as specified and directed.
M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in surface channels and drains including necessary form work for sauccer drain complete all as specified and directed.
Extra for forming fair finished drain or channel 45cm inner girth in cement concrete, using extra cement, incl forms, moulds, mitred /stopped ends etc complete all as specified and directed.
S&F factory made 50mm thick 900 x 600mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) finished the surface even and fair including reinforcement as per manufacturer's design and set in CM 1:4 and handles including demolition of old existing RCC cover (Reinforcement required to cut as facilitate to domolition) of any description and in any position complete all as specified and directed.
Cutting into existing manholes for connecting new drains internal dia of pipe 200mm making good to pipe & to or finished and reforming benching as required. 3/4 section in cement concrete (1:2:4) type B-1, smooth cutting out existing benching for forming branch channel (1/2) rendering complete all as specified and as directed.
S&F in repairs PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall of size 110mm bore complete all as specified and directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors of size 110mm bore complete all as directed.
S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floor of 75mm bore complete all as specified and directed.
S&F in repairs PVC (SWR) pipes, single socketed in any length with rubber ring joints, joints fixed to wall of 75mm bore complete all as specified and directed.
S&F in repair for Stack clamps for bore (any dia) of pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,100mm including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore complete all as specified and directed.
S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm bore complete all as specified and directed.
S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and directed.
S&F PVC (SWR) bends any radius 75 mm bore with trap door complete all as specified and directed.
S & F PVC (SWR) vent cowl 110mm Bore complete all as specified and directed.
S & F PVC (SWR) vent cowl 75mm Bore complete all as specified and directed.
S&F PVC (SWR) gully traps 125/100 setting and jointed in cement solvent. complete all as specified and directed.
S&F for Modular kitchen cabinet and wall mounted cabinet comprising of with and including necessary all other fixing arrangement and screws as per requirement at site etc. All cabinet made of 18mm thick glossy/matte finish solid waterproof MDF board and outer side and top side shall be of 18mm thick prelaminated both side coloured solid MDF board, for fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge.
S&F 12mm thick glossy/Matte Finish solid waterproof MDF board for kitchen wall cabinet back side and etc. comprising of with and including necessary all other fixing arrangement as per requirement at site. For fixing the items fitted in position to wall minimum screws size 120mm complete all as specified and directed by Engr-in-Charge.
S&F for stainless steel grill pattern Bottle Rack size 8"wide and 20" deep including stainless steel channels of make Hettich,Godrej or Hafale as approved. Dia of stainless steel bar used to make grill pattern shall be minimum 5mm fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich or equivalent in specified makes as approved.
S&F for stainless steel grill pattern basket of size 21"x4"x20" deep including stainless steel drawer channels of make :- Hettich, Godrej or Hafale as approved, Dia of stainless steel bar used to make grill pattern shall be minimum 5mm. Fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge.
S&F for stainless steel grill pattern basket of size 21"x6"x20" deep including stainless steel drawer channels of make :- Hettich, Godrej or Hafale as approved. Dia of stainless steel bar used to make grill pattern shall be minimum 5mm. Fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich or equivalent in specified makes as approved.
S&F for stainless steel grill pattern basket of size 21"x8"x20" deep including stainless steel drawer channels of complete all as specified and directed. Make :- Hettich, Godrej or Hafale as approved. Dia of stainless steel bar used to make grill pattern shall be minimum 5mm. Fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich or equivalent in specified makes as approved.
S&F for stainless steel perforated cuttlery box of size 21"x4"x20" deep and including stainless steel drawer channels of make :- Hettich, Godrej or Hafale as approved. Thickness of stainless steel sheet be 1mm thick, fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich or equivalent in specified makes as approved.
S&F for stainless steel grill pattern Grain Trolley with base of size 21"x24"x20" deep and including stainless steel channels of make :- Hettich, Godrej or Hafale asapproved. Dia of stainless steel grill shall be minimum 5mm. Fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich.
S&F for stainless steel grill pattern Plate rack of size 21"x8"x20" deep and including stainless steel channels of make :- Hettich, Godrej or Hafale. Dia of stainless steel grill shall be minimum 5mm. Fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich or equivalent in specified makes as approved.
S&F for stainless steel grill pattern Cup and Soucer rack of size 21"x6"x20" deep and including stainless steel channels of make :- Hettich, Godrej or Hafale as approved. Dia of stainless steel grill shall be minimum 5mm. Fixing the items fitted in position and complete all as specified and directed by Engr-in-Charge. Make :- Johnson kitchen, Hafele, Godrej interio and Hettich or equivalent in specified makes as approved.
S&F chromium plated auto hinges split box type overlay door mounting option, opening angle 110degree fixed, with screw all as specified and directed by Engr-in-Charge. Make :Kea SCH or Hettich as approved.
S&F 100mm long stainless steel decorative cupboard handles fixed with nuts, screws and washer complete all as specified and directed.
M&L for 304 grade stainless steel frame work for fixing of modular kitchen below kitchen platform including necessary welding, fixing in true level and position as per availability of size below kitchen platform complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing the demolished material from site complete all as specified and directed.
M&L for Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers in not exc 15cm thick water and rammed to a true surface complete all as specified and as directed.
M&L plain cement concrete 1:4:8 type D-2 (usig 40mm graded stone aggregate) as in subbase 75mm thick complete all as specified and as directed.
M&L for 60 mm thick glossy finished cement concrete coloured interlocking pavers block of M-35 grade with approved colour and pattern as approved, as in floors or pavements, laid over and including 30 mm thick stone dust cusioning, laid dry to the profile as directed incl filetting to the edges in CM (1:4), all as per manufacturer's instruction complete all as specified and as directed.
S&F for glossy finished chequered cement concrete tiles 30cmx30cmx30mm /20 cm x 20cm x 25 mm (as approved) thick set jointed with grey cement and pigment and pointed in neat cement slurry with and including 15 mm thick screed bed of CM(1:6) in floors complete all as specified and as directed.
M&L for plain cement concrete 1:2:4 Type B1(using 20mm graded aggregate) as in kerb or mud stop, rounded or champhered on edge complete all as specified and as directed.
Dismantling of mild steel framed work as in gates,doors,fencing post,etc. but excluding framed truss,complete all as specified and as directed.
Excavation in trenches not exc.1.5 mtr in width & not exc.1.5 mtr in depth for foundation of wall,pillars etc.and getting out in hard/dense soil complete all as specified &directed.
M &L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation of walls,pillars, etc.or mass filling concerete in fdn.complete all as specified &directed.
M&L for RCC Nominal Mix Type B1 1:2:4 (using 20mm graded stone aggregate) concrete as in Footing, Plinth Beam complete all as specified & directed.
M&L for RCC Nominal Mix Type B1 1:2:4 (using 20mm graded stone aggregate) concrete as in column, Piller complete all as specified & directed.
M & L for 10 mm and over dia TMT bars cut to length, bent to shape required incl cranking, bending spirally hooping for columns,hooking ends & binding with mild steel wire annealed not less than 0.9 mm dia securing with clips etc. complete all as specifided & as directed.
All as per item no above but 5mm dia and over upto and including 10mm dia in stirrups spacers and binders complete all as specified & directed.
M & L for form work to sides of concrete in foundations, footing bases of columns etc.complete all as specified & directed.
M &Lfor form work to sides of columns,pillars,posts etc.complete all as specified & directed.
M&L for framed MS work as in doors or gates of angle or other section with gusset plates, rails braces etc, complete drilled for fixing of steel sheeting or other covering, door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings also fastening and fixing complete all as directed and complete with locking arrangement.(Fe-410 W Gde-E-250 Quality -A) complete all as specified & directed.
M&L for mild steel black sheet in door 1.25mm thick in steel gate and similar work cut to size, holes punched, including round headed screws, cut nails or revets and fixed to wood or steel framing with plain 40mm lap joints with reveted or welded seams including or turning up, mitred complete all as specified and directed.
M&L for precast cement concrete block walling exc. 10 cm width with solid block PCC 1:3:6 type C1 (using 20 mm graded stone agg) and setting in cement mortar (1:6) all as specified and as directed by the Engineer-in-Charge.
M & L for 10 mm thick plastering on concrete or brick masonry surface of walls,finished surface even & smooth without using extra cement in cm 1:6 complete all as specified & directed.
Returning &filling in including spreading ,levelling ,watering &well ramming in layers not exc. 25 cm,complete all as specified &directed.
Removal of excavated material (soil) to a distance exc 250 m and n exc 500m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified &directed.
Dismantling fencing wire mesh,any type complete all as specified and as directed .
Supply only, chain link fencing of MS galvanized fencing, any size or type as approved complete all as specified and as directed . NOTE:- Dia of wire shall be as directed by EIC. Actual weight shall be measured at site & paid accordingly.
Fixing only chain link fencing including line wires, any mesh , size and type fixed to any type of standards, rails, straining bolts, etc., incliding provision of binding wire complete all as specified and directed Note : Supply only chain link fencing and line wire will be measeured and paid separetly.
S&F mild steel round bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooking ends stiffeners confirming to FE-410-W ( Gde E 250) quality-A or Fe 290 (Gde E-165) complete all as specified and as directed .
M&L Mild steel flat iron fillets (for securing wire mesh) including all necessary drilling, bolting or riveting etc and similar work conforming to FE-290 Gde E-165complete all as specified and as directed .
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut length of bolt n exc 5cm long and dia of neck 11 to 15mm complete all as specified and as directed .
M&L for preparation of new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed .
M&L for preparation of new steel surfaces of any description, exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed .
Excavating in post holes (or similar holes) each n.exc 0.50 cum in any type of soil and getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil n.exc 50m and making good the surface in hard/dense soil complete all as specified and directed.
M & L for PCC 1:3:6 type C2 ( using 40mm graded stone aggregate ) as in foundation filling or mass concrete or simillar work complete all as specified and as directed .
Dismantling posts or struts (wood, steel or RCC), any section, including taking out embeded portion from natural ground and making good disturbed ground complete all as specified and directed.
S&F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming complete all as specified and as directed .
E/M PORTION Taking down carefully aluminium / copper point wiring complete (light, fan socket & power) including unserviceable fixtures and fittings such as switches ceilimg roses pendents regulators sockets light fittings etc complete removing material for taking credit & making good disturbed wall / floor etc complete all as directed by Engineer-in-Charge.
Taking down sub main wiring complete including fitting and fixtures, removing materials for making good disturbed surfaces of walls, floors, roof etc, all as specified and as directed.
Taking down carefully unserviceable DBs any type/size With MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as directed.
M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked including PVC conduit and drawn through concealed heavy duty PVC conduit fixed in walls / roofs / floors / ceiling etc duly concealed and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly, indluding cuttting and chasing, concealed modular flush boxes, modular cover plates with frame mounting for housing the switches, socket outlets etc, all as specified and directed. NOTE:- Cost of cutting chases & making good the disturbed surfaces to match existing finishes shall deemed to be included in quoted rate. (a) One light point controlled by one way switch.
(b) One light point controlled by Two way switch.
(c) One fan/exhaust fan point controlled by one switch and one regulator.
(d) One bell/buzzer point controlled by one bell push button on independent.
(e) One 3 pin switch socket outlet point 5 Amps on independent board.
(f) One 3 pin switch socket outlet point 5 Amps on same board with other switch.
All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size complete all as specified and directed.
S & Fix modular switch 1 way 6A, 1 module complete all as specified and directed.
S & Fix modular switch 2 way 6A, module complete all as specified and directed.
S & Fix modular switch1 way 16A, 1 module complete all as specified and directed.
S & Fix modular socket out let 6A 2/3 on combined 2 module complete all as specified and directed.
S & Fix modular socket out let 6A/16A-2/3 pin combined 2 module complete all as specified and directed.
S & Fix Ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed.
S&Fix fan regulator electronic 2 modular type volts AC 50 HZ ,4 step complete all as directed.
S & Fix Bell push modular type SP 6 Amps complete all as specified and directed.
S & Fix call bell (Ding Dong) 240 V, 50 Hz complete all as specified and directed.
S & Fix Batten General purpose suitable for single LED Tubelight with integral LED driver, available in single connection suitable for mount LED tube rod 1 x 18/20 watts including necessary electric connections 3 core 1 sqmm insulated copper wire from ceiling rose to tube light fitting complete all as specifed and directed by Engineer-in-charge.
S & Fix LED Tubelight 18/20 watts (single side connection) with very high suited for installation in existing tubelight luminaire with G13 lamp holders to give glare free light with necessary fixing arrangement etc complete all as specifed and directed by Engineer-in-charge.
S&F LED Tube light fitting 10 watt, 230 volts, sleek and seamless batten with an efficient diffuser to illuminate work and retail spaces complete with all accessories all as specified & directed by Engr-in-Charge.
Supply and Fix Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base including suitable lamp complete all as specified and directed.
S & Fix 30 Watts LED new generation energy saving and environmental friendly long life LED building light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection complete all as specified and directed.
Taking down the defective ceiling fan / Exhaust fan of any sweep and make after disconnecting electrically & mechanically and examine & carry out the servicing/overhauling the ceiling fan by thoroughly cleaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of painting re-fixing, testing in all respect for smooth running complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, and accessories, regulator type 230 V, 1200 mm sweep. Five star rated with brushless direct current motor (BLDC) and deposit the old fan to the store complete all as specified and directed.
S&F exhaust fan, AC, single phase, 240 V, 250 mm sweep, PVC body with louvers, including connected with 3 core 1.5 sq mm copper conductor cable from ceiling rose to exhaust fan all as specified and as directed.
S&F exhaust fan, AC, single phase, 240 V, 230 mm sweep, 4 blades Steel body with louvers, with making suitable size hole in any type wall, with good finishing including connected with 3 core 1.5 sq mm copper conductor cable from ceiling rose to exhaust fan all as specified and as directed. Make : Usha or equivalent in Bajaj/Havells
Taking down the existing unserviceable Geyser and after disconnecting electrically & mechanically and examine & carry out the servicing/overhauling the geyser by thoroughly cleaning the tank, thermostat, heatingelement and LED Lamp indicator, testing in all respect for smooth running and refixing complete all as directed.
Supply and fix electric water heater, storage type with heating element of 2 KW capacity 25 litre, BEE 5 Star rated, with temperature control knob and analogue temperature indicator complete with all accessories such as safety valve, thermostate, NRV, connection piece etc deposit the old unserviceable geyser to the store all as directed by Engr-in-charge.
Taking down the existing electric meter of Single Phase/ Three phase any capacity and make after disconnecting electrically and carry out the cleaning and refixing, reconnecting including applying one coat of paint on existing ms box of electric meter testing in all respect fo smooth running complete all as directed by Engr -in charge.
S&Fix MCB DB VTPN 4 ways,with metal double door, IP -43 protection suitable for MCCB as incommer and MCB as out going, 415 volt 3 phase complete with appropriate size copper bus bar and neutral link as required at site and including cutting chases to wall for fixing of DB and making good distrubed wall/surface all as required at site i.e directed by Engr-in charge.
S & Fix double door sheet metal enclosure distribution board SPN, 12 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete all as specified & as directed.
S & Fix double door sheet metal enclosure distribution board SPN, 4 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete all as specified & as directed.
Supply and fixing MCCB Four pole, 415 volts, 63 Ampere, rupturing capacity 16 KA, in the DB complete all as specified and directed.
S & Fix of RCCB single pole and neutral, 240 volts, 30 mA, 40 Ampere, rupturing capacity complete all as specified and directed.
S & Fix of MCB single pole, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.
S & Fix sheet metal enclosure distribution board SPN DB's 2 way with MCB complete all as specified and directed.
S & Fix metal clad socket including single pole 20 Amps MCB complete all as specified and directed.
M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of PVC conduit on walls/roofs/ceiling with its accessories all as specified and directed by Engr-in -charge for the following:- (a) 2x1.5 sq mm and 1x1.5 sq mm as earth wire
(b) 2x4.0 sq mm and 1x4 sq mm as earth wire
(c) 2x6.0 sq mm and 1x6 sq mm as earth wire
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core including taking out old u/s cable of any size complete all as specified and directed.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth and getting out in Soft / loose soil including forming bottom surface etc complete all as specified and directed.
Returning, filling in including spreading, levelling ,watering and well ramming in layers not exceeding 25 cm thick complete in soil complete all as specified and directed.
Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 50 mtr above the starting point complete all as specified and directed.
Supply & Laying 50 mm outside dia double wall corrugated pipe (DWC) ISI Mark for enclosing cable below ground / road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirement complete all as specified and directed.
M &L for GI pipe 50mm dia 'light grade' for road crossing / on wall / on pole for cable protection complete all as specified and directed.
M & L Earthing complete with galvanised steel earth plate electrode 60x60cmx06mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. NOTE:- Cost of earthing lead and protection pipe upto 7.5 M shall deemed to be included in quoted rate.
M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through heavy duty PVC Caping Casing on walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly including concealed MS box with 3 mm thick laminated sheet cover fixed with brass screws and cup washers for mounting of plate mounting for housing the switches, socket outlets, fan regulators etc for one Light / Fan Point / Bell point controlled by one switch complete all as specified and as directed :- (a) One light point controlled by one way switch.
(b) One Ceiling/Exhuast fan point controlled by one way switch.
(c) One 3 pin switch socket outlet point 5 Amps on independent board.
(d) One 3 pin switch socket outlet point 5 Amps on same board with other switch.
S & Fix switch piano, flush type single pole, one way 5 Amps capacity complete all as specified and directed.
S & Fix socket out let 6A 2/3 on combined 2 module complete all as specified and directed.
S&Fix fan regulator electronic flush type volts AC 50 HZ, 4 steps complete all as specified & as directed.
M/S ANJANI ASSOCIATES
OM GANESH CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .