ASOM_MALA_2.0_23_24_11 Improvement and Upgradation of Digboi Pengree Bordumsa Mohong Chariali Road (Length 40.00 km) under Asom Mala-2.0 for the year 2023-24.

Amount

Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 metres and earth filling in the depression/pit. Girth beyond 900 mm to 1800 mm

Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 metres and earth filling in the depression/pit. Girth above 1800 mm to 2700 mm

Clearing and grubbing road land including uprooting wild vegetation, grass,bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps ofsuch trees cut earlier and disposal of unserviceable materialsandstacking ofserviceable material to be used or auctioned, upto a lead of 1000 m includingremoval and disposal of top organic soil not exceeding 150 mm in thickness asper Technical Specification Clause 201. In area of non-thorny jungle

Dismantling of existing structures like culverts, bridges, retaining walls and otherstructure comprising of masonry, cement concrete, wood work, steel work,including T&P and scaffolding wherever necessary, sorting the dismantledmaterial, disposal of unserviceable material and stacking the serviceable materialwith all lifts and lead of 1000 m as per Technical Specification Clause 202 Cement Concrete

Dismantling of existing structures like culverts, bridges, retaining walls and otherstructure comprising of masonry, cement concrete, wood work, steel work,including T&P and scaffolding wherever necessary, sorting the dismantledmaterial, disposal of unserviceable material and stacking the serviceable materialwith all lifts and lead of 1000 m as per Technical Specification Clause 202 Reinforced Cement Concrete

Removing all types of Hume pipes and stacking within a lead of 1000 mincluding Earthwork and Dismantling of Masonry Works as per TechnicalSpecification Clause 202 Above 600 mm to 900 mm dia Hume pipe

Removing all types of Hume pipes and stacking within a lead of 1000 mincluding Earthwork and Dismantling of Masonry Works as per TechnicalSpecification Clause 202 Above 900 mm dia Hume pipe

Scarifying Existing Bituminous Surface to a Depth of 150 mm by MechanicalMeansScarifying the existing bituminous road surface to a depth of 150 mm anddisposal ofscarified material with a lift upto 3.0m and lead upto 1000 m asperTechnicalSpecification Clause 301.4

Construction of Embankment with Material Obtained from Roadway CuttingConstruction of embankment with approved materials deposited at site fromroadway cutting and excavation from drain and foundation of other structuresgraded and compacted to meet requirement of Tables 300.1 and 300.2 as perTechnical Specification Clause 301.5

Embankment Construction with Material Obtained from Borrow Pits (Construction of embankment with approved material obtained from borrowpits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirment of table 300-2 (Including cost of testing of materials at site and laboratory as directed by the deptt.) Govt. Land

Construction of Subgrade and Earthen Shoulders (Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table (300-2) (a), (Including cost of testing of materials at site and laboratory as directed by the deptt.) Govt. Land

Providing and laying pitching on slopes laid over prepared filter media asper drawing and technical specifications Clause 1302A. Stone/ Boulder

Plant Mix Method (Construction of granular sub-base by providing clos egraded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per cl.401 (Including cost of testing of materials at site and laboratory as directed by the deptt.) GSB Separation layer - For grading- I Material

Plant Mix Method (Construction of granular sub-base by providing clos egraded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per cl.401 (Including cost of testing of materials at site and laboratory as directed by the deptt.) GSB Separation layer - For grading- II Material

Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sb-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density (including carriage of mixed materials up to 10.0 Km initial lead from mixing plant )

Construction of Granular Sub-base by providing coarse graded material, spreading in uniform layers on prepared surface and compacting at OMC with vibratory roller to achieve the desired density, complete in all respect and as per relevant clauses of Section-400. GSB Separation layer - For grading- I Material For Hard Shoulder

Providing and laying Surface Dressing as wearing course consisting of a layer of bituminous binder laid on the prepared surface, followed by a cover of crushed stone aggregates of specified size and rolling with three wheel 80-100 kN static roller including cleaning the road surface as per Technical Specification Clause 507. B By Mechanical Means Case – I: Nominal chipping size 13.2 mm (ii) Bitumen (S-65)

Providing and applying Tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503

Providing and applying Tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503

Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam (Gr.-II) with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix and filler transporting the hot miox to work site, laying with a hydro static paver finisher with sensor control to the reqd. grade, lavel and alignment, rolling with smooth wheeled, vibratory and tandemrollers to achieve the desired compaction as per MoSRT & Hcl. no.507 complete in all respect. (including carriage of mixed materials upto10.0 Km initial lead from mixing plant) (Including cost of testing of materials at site and laboratory as directed by the deptt.)

Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.509. complete in all respect. (including carriage of mixed materials up to 10.0 Km initial lead from mixing plant )( Including cost of testing of materials at site and laboratory as directed by the deptt.)

Retro reflectorised Traffic sign Providing and fixing of retro-reflectorised cautionary, mandatory and informatorysign as per IRC:67 made of encapsulated lens type reflective sheeting videClause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on amild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground bymeans of properly designed foundation with M15 grade cement concrete 450 mmx 450 mm x 600 mm, 600 mm below ground level as per drawings and TechnicalSpecification Clause 801 90 cm equilateral triangle Cautionary Sign

Providing and fixing of retro-reflectorised cautionary, mandatory and informatorysign as per IRC:67 made of encapsulated lens type reflective sheeting videClause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on amild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground bymeans of properly designed foundation with M15 grade cement concrete 450 mmx 450 mm x 600 mm, 600 mm below ground level as per drawings and TechnicalSpecification Clause 801 600mm circular

Providing and fixing of retro-reflectorised cautionary, mandatory and informatorysign as per IRC:67 made of encapsulated lens type reflective sheeting videClause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on amild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground bymeans of properly designed foundation with M15 grade cement concrete 450 mmx 450 mm x 600 mm, 600 mm below ground level as per drawings and TechnicalSpecification Clause 801 80 cm x 60 cm rectangular

Semi-Reflective Traffic Signs Direction and place identification signs more than 0.90 sqm sign boardProviding and erecting direction and place identification of semi reflective signboards as per IRC-67 made of 2 mm thick M.S. Sheet duly stove enameled paintwhite colour in front and grey colour on back with reflective border of 70 mmwidth and required message, letters, figures with reflective tape of engineeringgrade as per MORD specifications of required shade and colour. Supported andwelded on two nos. 47 mm x 47 mm of 12 SWG square tube of 3050 mm heightduly strengthened by 25 mm x 5 mm MS flat iron on edges on back firmly fixed tothe ground by means of properly designed foundations with M-15 grade cementconcrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perapproved drawing and Technical Specification Clause 1701

Kilometre Stone (Reinforced cement concrete M15 grade kilometre stone of standard design as perIRC:8-1980, fixing inposition including painting and printing etc) 5th kilometre stone (precast)

Kilometre Stone (Reinforced cement concrete M15 grade kilometre stone of standard design as perIRC:8-1980, fixing inposition including painting and printing etc) Ordinary Kilometer stone (Precast)

Kilometre Stone (Reinforced cement concrete M15 grade kilometre stone of standard design as perIRC:8-1980, fixing inposition including painting and printing etc) 200 m stone (precast)

Boundary pillar Reinforced cement concrete M15 grade boundary pillars/local stone of standarddesign as per IRC:25, fixed in position including finishing and lettering butexcluding painting as per drawing and Technical Specification Clause 1704

Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads@250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications Lane/centreline/edge marking/transverse and any other marking

Type - A, "W" : Metal Beam Crash Barrier (Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel Section 150 x 75 x 5 mm, 330 mm long complete as per clause 810.

Providing and erecting overhead signs of anti-corrosive steel tubular framed structure (all the steel work must be TATA/ SAIL/ any other approved brand) for retro reflective signage boards made of high intensity grade encapsulated lens type retro Reflective sheeting conforming to ASTMD4956 type B III specifications and having approved pattern over its entire surface bonded on to 2.00 mm thick aluminium sheet with back supporting angle iron frame of 35x35x4mm angle iron duly riveted with solid MS & aluminum rivets. The entire face of the sign shall be covered & bounded with yellow/ white/ red/ blue high intensity encapsulated lens reflective sheeting with distinctive hoed pattern on front side (no plain surface) with heat lamp vacuum applicator machine only. The yellow/ white/ red/ blue portion of the board shall be screen printed on the high intensity shed base including fixing the board on portal/ support/ wall/ dowel rod etc., with contractors clamps/ cleats/ bolts/rivets/ wells including all contractors materials, labour, tools, lead & lifts etc. complete and all other incidental charges necessary for successful completion of work as per specifications and as directed. (Retro Reflective sheeting conforming toASTMD4956 type B III specifications and Foundation Works shall be measured and paid separately)

Providing ‘Sparkle Solar Road Studs, manufactured by Tata B.P. Solar India Ltd. Of size (125mm x 125mm), 90mm height (from bottom of shank to the top of stud) with detachable battery, m6LEDs-three on each side for Bi-directional studs/ 3 LEDs on one side for unidirectional studs, ultra bright LED in amber and red colour, weight per stud 700+25 gms, flash rate of 50-65 times per minute completely water resistant and weather proof with replacement warranty and free maintenance fro one year from the date of installation of stud on road-(installation should be made using adhesives and procedures recommended by manufacturer under the supervision of their competent technician) Bi-directional Stud-

Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H’s fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance.

Printing new letter and figures of any shade (Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade) English and Roman

Cross Drainage RCC box culvert (1 x 1.5m x1.5m) Excavation for Structures (Earthwork in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. (i) upto 3m depth

Plain/Reinforced cement concrete (M-15) in open foundation complete as per drawing and technical specification including steel shuttering formwork.

Plain/Reinforced cement concrete (M-25) in open foundation complete as per drawing and technical specification including steel shuttering formwork.

Supplying, fitting and placing TMT (Fe-500 D) reinforcement bar (From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL) in foundation complete as per drawings and technical specifications Clauses 1000 and 1202

Stone masonry work in cement mortar 1:3 in foundation complete as drawing and Technical Specification (b) Random Rubble Masonry

Plain/Reinforced cement concrete (M-30), in substructure complete as per drawing and technical specification and steel shuttering formwork

Supplying, fitting and placing TMT IS:1786 (Fe500) bar reinforcement in sub-structure complete as per drawing and technical specifications TMT-IS1786 (Fe-500D) Primary Producer (TATA /SAIL /EsserSteel/ Jindal panther steel/ Shyam steel or equivalent)

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause2504.2.2. of MoRTH specifications to a thickness of not less than 600mm with smaller size to wards the soil and bigger size towards the wall and provided over the entire surfaces behind the abutement, wing wall and return wall to the full height compacted to firm condition complete as per drawing and technical specification.

Furnishing and Placing Reinforced / Prestressed cement concrete (M-25) in super-structure as per drawing and Technical Specification including steel shuttering formwork.

Furnishing and Placing Reinforced / Prestressed cement concrete (M-30) in super-structure as per drawing and Technical Specification including steel shuttering formwork.

Reinforcement in Super Structure: Supplying, fitting and placing TMT conforming to IS:1786 Fe500D reinforcement in super-structure including splicing complete as per drawing and technical specifications TMT-IS1786 (Fe-500D) Primary Producer (TATA /SAIL /EsserSteel/ Jindal panther steel/ Shyam steel or equivalent)

Providing Weep Holes in Brick masonry/ Stone masonry, Plain/ Reinforced concrete abument, wing wall, Wing wall with 100mm dia AC pipe extending through the full width of the structures with slope of 1(V): 20 (H) towards drawing face complete as per drawing and Technical specification

Drainage spouts complete as per drawing and Technical specification

Burried Joint (Providing and laying a burried expansion joint, expansion gap being 20mm, covered with 12mm thick, 200mm wide galvanised wieldable structural steel plate as per IS:2062, placed symmetrical to centre line of the joint, resting freely over the top surfaces of the deck concrete, welding of 8 mm dia, 100 mm long galvanized nails spaced 300mm C/C along the centerline of the plate, all as specified in clause 2604.)

Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolurence of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequat space between vertical posts for expansion, complete as per approved drawings and technical specifications

Painting on concrete surface (Providing and applying 2coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 Sq.m. ) For Plain surface

Painting on concrete surface (Providing and applying 2coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 Sq.m. ) For RCC Railing

Printing New Lettering and Figures of any Shade Printing new letter any figures of any shade with synthetic enamle paint black or any other approved colour to give an even as per drawings and technical specification clause 1701 ii) English and Roman

Cross Drainage RCC box culvert (1 x 3.0m x3.0m) Excavation for Structures (Earthwork in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. (i) upto 3m depth

Plain/Reinforced cement concrete (M-25) in open foundation complete as per drawing and technical specification including steel shuttering formwork.

Plain/Reinforced cement concrete (M-15) in open foundation complete as per drawing and technical specification including steel shuttering formwork.

Supplying, fitting and placing TMT IS:1786 Fe500D bar reinforcement in foundation complete as per drawing and technical specifications TMT-IS1786 (Fe-500D) Primary Producer (TATA /SAIL /EsserSteel/ Jindal panther steel/ Shyam steel or equivalent)

Stone masonry work in cement mortar 1:3 in foundation complete as drawing and Technical Specification (b) Random Rubble Masonry

Plain/Reinforced cement concrete (M-30), in substructure complete as per drawing and technical specification and steel shuttering formwork

Supplying, fitting and placing TMT IS:1786 (Fe500) bar reinforcement in sub-structure complete as per drawing and technical specifications TMT-IS1786 (Fe-500D) Primary Producer (TATA /SAIL /EsserSteel/ Jindal panther steel/ Shyam steel or equivalent)

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause2504.2.2. of MoRTH specifications to a thickness of not less than 600mm with smaller size to wards the soil and bigger size towards the wall and provided over the entire surfaces behind the abutement, wing wall and return wall to the full height compacted to firm condition complete as per drawing and technical specification.

Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighingless than 25 kg laid dry complete as per drawing and technicalspecifications Clause 1301

Furnishing and Placing Reinforced / Prestressed cement concrete (M-25) in super-structure as per drawing and Technical Specification including steel shuttering formwork.

Furnishing and Placing Reinforced / Prestressed cement concrete (M-30) in super-structure as per drawing and Technical Specification including steel shuttering formwork.

Reinforcement in Super Structure: Supplying, fitting and placing TMT conforming to IS:1786 Fe500D reinforcement in super-structure including splicing complete as per drawing and technical specifications TMT-IS1786 (Fe-500D) Primary Producer (TATA /SAIL /EsserSteel/ Jindal panther steel/ Shyam steel or equivalent)

Providing Weep Holes in Brick masonry/ Stone masonry, Plain/ Reinforced concrete abument, wing wall, Wing wall with 100mm dia AC pipe extending through the full width of the structures with slope of 1(V): 20 (H) towards drawing face complete as per drawing and Technical specification

Drainage spouts complete as per drawing and Technical specification

Burried Joint (Providing and laying a burried expansion joint, expansion gap being 20mm, covered with 12mm thick, 200mm wide galvanised wieldable structural steel plate as per IS:2062, placed symmetrical to centre line of the joint, resting freely over the top surfaces of the deck concrete, welding of 8 mm dia, 100 mm long galvanized nails spaced 300mm C/C along the centerline of the plate, all as specified in clause 2604.)

Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.

Painting on concrete surface (Providing and applying 2coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 Sq.m. ) For Plain surface

Painting on concrete surface (Providing and applying 2coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 Sq.m. ) For RCC Railing

Printing New Lettering and Figures of any Shade Printing new letter any figures of any shade with synthetic enamle paint black or any other approved colour to give an even as per drawings and technical specification clause 1701 ii) English and Roman

Cross Drainage RCC box culvert (1 x 4.0m x4.0m) Excavation for Structures (Earthwork in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. (i) upto 3m depth

Plain/Reinforced cement concrete (M-15) in open foundation complete as per drawing and technical specification including steel shuttering formwork.

Plain/Reinforced cement concrete (M-25) in open foundation complete as per drawing and technical specification including steel shuttering formwork.

Supplying, fitting and placing TMT IS:1786 Fe500D bar reinforcement in foundation complete as per drawing and technical specifications TMT-IS1786 (Fe-500D) Primary Producer (TATA /SAIL /EsserSteel/ Jindal panther steel/ Shyam steel or equivalent)

Stone masonry work in cement mortar 1:3 in foundation complete as drawing and Technical Specification (b) Random Rubble Masonry

Plain/Reinforced cement concrete (M-30), in substructure complete as per drawing and technical specification and steel shuttering formwork

Supplying, fitting and placing TMT IS:1786 (Fe500) bar reinforcement in sub-structure complete as per drawing and technical specifications TMT-IS1786 (Fe-500D) Primary Producer (TATA /SAIL /EsserSteel/ Jindal panther steel/ Shyam steel or equivalent)

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause2504.2.2. of MoRTH specifications to a thickness of not less than 600mm with smaller size to wards the soil and bigger size towards the wall and provided over the entire surfaces behind the abutement, wing wall and return wall to the full height compacted to firm condition complete as per drawing and technical specification.

Furnishing and Placing Reinforced / Prestressed cement concrete (M-25) in super-structure as per drawing and Technical Specification including steel shuttering formwork.

Furnishing and Placing Reinforced / Prestressed cement concrete (M-30) in super-structure as per drawing and Technical Specification including steel shuttering formwork.

Reinforcement in Super Structure: Supplying, fitting and placing TMT conforming to IS:1786 Fe500D reinforcement in super-structure including splicing complete as per drawing and technical specifications TMT-IS1786 (Fe-500D) Primary Producer (TATA /SAIL /EsserSteel/ Jindal panther steel/ Shyam steel or equivalent)

Providing Weep Holes in Brick masonry/ Stone masonry, Plain/ Reinforced concrete abument, wing wall, Wing wall with 100mm dia AC pipe extending through the full width of the structures with slope of 1(V): 20 (H) towards drawing face complete as per drawing and Technical specification

Drainage spouts complete as per drawing and Technical specification

Burried Joint (Providing and laying a burried expansion joint, expansion gap being 20mm, covered with 12mm thick, 200mm wide galvanised wieldable structural steel plate as per IS:2062, placed symmetrical to centre line of the joint, resting freely over the top surfaces of the deck concrete, welding of 8 mm dia, 100 mm long galvanized nails spaced 300mm C/C along the centerline of the plate, all as specified in clause 2604.)

Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.

Painting on concrete surface (Providing and applying 2coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 Sq.m. ) For Plain surface

Painting on concrete surface (Providing and applying 2coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 Sq.m. ) For RCC Railing

Printing New Lettering and Figures of any Shade Printing new letter any figures of any shade with synthetic enamle paint black or any other approved colour to give an even as per drawings and technical specification clause 1701 ii) English and Roman

Cross Drainage RCC box culvert (2 x 4.0m x4.0m) Excavation for Structures (Earthwork in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. (i) upto 3m depth

Plain/Reinforced cement concrete (M-25) in open foundation complete as per drawing and technical specification including steel shuttering formwork.

Plain/Reinforced cement concrete (M-15) in open foundation complete as per drawing and technical specification including steel shuttering formwork.

Plain/Reinforced cement concrete (M-30) in open foundation complete as per drawing and technical specification including steel shuttering formwork.

Supplying, fitting and placing TMT IS:1786 Fe500D bar reinforcement in foundation complete as per drawing and technical specifications TMT-IS1786 (Fe-500D) Primary Producer (TATA /SAIL /EsserSteel/ Jindal panther steel/ Shyam steel or equivalent)

Plain/Reinforced cement concrete (M-30), in substructure complete as per drawing and technical specification and steel shuttering formwork

Supplying, fitting and placing TMT IS:1786 (Fe500) bar reinforcement in sub-structure complete as per drawing and technical specifications TMT-IS1786 (Fe-500D) Primary Producer (TATA /SAIL /EsserSteel/ Jindal panther steel/ Shyam steel or equivalent)

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause2504.2.2. of MoRTH specifications to a thickness of not less than 600mm with smaller size to wards the soil and bigger size towards the wall and provided over the entire surfaces behind the abutement, wing wall and return wall to the full height compacted to firm condition complete as per drawing and technical specification.

Furnishing and Placing Reinforced / Prestressed cement concrete (M-25) in super-structure as per drawing and Technical Specification including steel shuttering formwork.

Furnishing and Placing Reinforced / Prestressed cement concrete (M-30) in super-structure as per drawing and Technical Specification including steel shuttering formwork.

Reinforcement in Super Structure: Supplying, fitting and placing TMT conforming to IS:1786 Fe500D reinforcement in super-structure including splicing complete as per drawing and technical specifications TMT-IS1786 (Fe-500D) Primary Producer (TATA /SAIL /EsserSteel/ Jindal panther steel/ Shyam steel or equivalent)

Providing Weep Holes in Brick masonry/ Stone masonry, Plain/ Reinforced concrete abument, wing wall, Wing wall with 100mm dia AC pipe extending through the full width of the structures with slope of 1(V): 20 (H) towards drawing face complete as per drawing and Technical specification

Drainage spouts complete as per drawing and Technical specification

Burried Joint (Providing and laying a burried expansion joint, expansion gap being 20mm, covered with 12mm thick, 200mm wide galvanised wieldable structural steel plate as per IS:2062, placed symmetrical to centre line of the joint, resting freely over the top surfaces of the deck concrete, welding of 8 mm dia, 100 mm long galvanized nails spaced 300mm C/C along the centerline of the plate, all as specified in clause 2604.)

Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.

Painting on concrete surface (Providing and applying 2coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 Sq.m. ) For Plain surface

Painting on concrete surface (Providing and applying 2coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 Sq.m. ) For RCC Railing

Printing New Lettering and Figures of any Shade Printing new letter any figures of any shade with synthetic enamle paint black or any other approved colour to give an even as per drawings and technical specification clause 1701 ii) English and Roman

CONCRETE BRIDGE REPAIRING Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolurence of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000mm, leaving adequat space between vertical posts for expansion, complete as per approved drawings and technical specifications.

Reinforced Cement Concrete Crash Barrier (Provision of an Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with M-20 grade concrete with HYSD reinforcement conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified) (i) M 20 grade concrete

Drainage Spouts complete as per drawing and Technical specification

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification

Reinforced cement concrete approach slab M-25 including reinforcement and formwork complete as per drawing and Technical specification TMT-IS1786(Fe-500D) Primary Producer (TATA/ SAIL/ Esser Steel/ Jindal panther steel/ Shyam steel or equivalent)

Bituminous Concrete (Providing and laying bituminous concrete (Gr.-II) with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6% of mix and filler transporting the hot mix to work site, laying with a hydro static paver finisher with sensor control to the reqd. grade, lavel and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoSRT&Hcl.no.509. complete in all respect. (including carriage of mixed materials upto 10.0 Km initial lead from mixing plant) (Including cost of testing of materials at site and laboratory as directed by the deptt.)

Providing and laying 12mm thick mastic asphalt wearing course on top of deck slab excluding prime coat with paving grade bitumen meeting the requirements given in table 500-29, prepared by using mastic cooker and laid to required level and slope aftering cleaning the surface, including providing antiskid surface with bitumen precoated finegrained hard stone shipping of 9.5mm nominal size at the rate of. 005 cum per 10sqm and at approximate spaciong of 10cm center to center in both directions, pressed in to surfaces when temperature of the surfaces not less than 100degC., protuding 1mm to 4mm over mastic surfaces, all complete as per clause 515.

Protection works Excavation for Structures (Earthwork in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Plain/Reinforced cement concrete (M-15) in open foundation complete as per drawing and technical specification including steel shuttering formwork.

Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and Technical Specifications A. Random Rubble Masonry

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification A. Granular Materials

Providing Weep Holes in Brick masonry/ Stone masonry, Plain/ Reinforced concrete abument, wing wall, Wing wall with 100mm dia AC pipe extending through the full width of the structures with slope of 1(V): 20 (H) towards drawing face complete as per drawing and Technical specification

Drainage Works- Cover Drain Excavation for Structures (Earthwork in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Ordinary rock (not requiring blasting)

Plain/Reinforced cement concrete (M-15) in open foundation complete as per drawing and technical specification including steel shuttering formwork.

Plain/Reinforced cement concrete (M-25), in substructure complete as per drawing and technical specification and steel shuttering formwork

Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification i) RCC M-30 grade using concrete mixer.

Supplying, fitting and placing TMT (Fe-500 D) reinforcement bar . (From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL) in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202

Shifting of water supply pipeline

Utility shifting

Shifting of gas pipe pipeline

Shifting of telwphone cable pipeline

SHREE GAUTAM CONSTRUCTION CO. LTD.