44-npp sandila me wno25 me vibbhin sthano par nali marammat,cc marammmat, nali cross puliya marammat,interlocking marammmat va khadanja marammat ka karya

Eearthwork in excauvation ilc all comp.AS S.I.NO-251.

Plain cement Concrement 1:6:12 nominal mix in |foundation with crushed aggregate 40 mm nominal size 3 mechanically mixed,placed in foundation and compected by vibration including curing for 14 days.AS |S.I.NO.(273)

M-150 Class BIW in 1:4 cement with c- sand ilc all comp..AS PWD SOR 19/7/2022 S.I.NO-305a.

Furnishing and placing reintforced cement concrement 5 in super structure as per drawing and Technical Specifications.M20 (1:2:4).S.I.NO.(283)

Supplying fitting and placing HYSD bar reinforcement 6 in superstructure complete as per drawing and Technical Specifications clauses.S.I.NO.(504)

Plastering with cement mortar (1:4) 12 mm thick on brickwork in substructurelsuperstracutre .S.l.NO.584.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in ৪ place method with rotavator at OMC, and compactina with smooth wheel roller to achieve the desired |density, complete as per Technical Specification Clause 401.

Construcation of un-reinforceed, dowel jointed at expanssion and construction joint only, plain cement |concrete payment, thickness as |desing over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 M30 (Grade) coarse and fine aggregates |conforming to IS: 383, Maximum size of coarse aggregate not exceeding 25 mm Mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design laid |in approved fixed side lorwork (steel plates including leveling the |formwork as per drawing)spreading the concrete with shovels rakes compacted using needle screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, |constrution joint, applying deboning strips, primer, sealamt dwell bars, near approaches to bridge/culvert and construction joint, admixtures as approved, curing of

80mm thick cc interlocking tiles with 50 mm dry loose sand in all work comp.

GST 18% (Notice- SEE manual estimate)