Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.5 LAccepted-AOC | L1 | Accepted-AOC Accept | |
| 2 | L2₹35.3 L+₹58,670 (1.69%)Rejected-Finance 1286 TOTA RAM KI DHANI JAISALMER RAJ 345001 | JAISALMER | JAISALMER | RAJASTHAN | 345001 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹36.2 L+₹1.5 L (4.42%)Rejected-Finance | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹36.7 L+₹2.0 L (5.90%)Rejected-Finance JAISALMER | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹36.8 L+₹2.2 L (6.24%)Rejected-Finance JAISALMER | JAISALMER | RAJASTHAN | 342310 | L5 | Rejected-Finance Not being lowest |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
12 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Army Jaisalmer
GE Army Jaisalmer - 345001
REPAIR TO ALUMINUM DOORS, WINDOWS AND JOINERY AND MISC BR WORKS IN CERTAIN AREA UNDER AGE BR-III AT MIL STN JAISALMER
2023_MES_595624_1
8293/23-24/E8
Open Tender
Civil Works
Item Rate
180 days
Jaisalmer
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Army Jaisalmer
₹99,000
Yes
7 Jul 2023
15 May 2023
19 Jun 2023
15 May 2023
12 Jun 2023
29 May 2023
Amount
Dismantling wrought iron or mild steel work of any description not othervise provided for complete all as specified & directed by Engineer in charge.
S&F rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated) conform to Fe 410-W (Gde E-250 quality-A) complete all as specified & directed by Engineer-in-charge.
M&L for preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified & directed by Engineer-in-charge.
Dismantling (AC corrugated , semi corrugated etc ) AC sheets in roof coverings complete all as specified & directed by Engineer in charge.
S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet/ semi corrugated 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified & directed by Engineer-in-charge.
Demolition of brick work or stone/PCC block masonery built in cement mortar including all quoins arches, pillers etc complete all as specified & directed by Engineer-in-charge.
M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified & directed by Engineer-in-charge.
M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) but except stone complete all as specified & directed by Engineer-in-charge. Note :- serviceable stone obtained from demolition shall be used.
Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses complete all as specified & directed by Engineer-in-charge.
M&L for precast cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in block masonry with solid blocks exceeding 10cm width and setting in cement mortar 1:6 complete all as specified & directed by Engineer-in-charge.
Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed by Engineer-in-charge.
Material and labour for 15 mm thick rendering in cement mortar 1:6 on fair faces of stone masory surfaces or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.
Material and labour for 15 mm thick rendering in cement mortar 1:4 on fair faces of stone masory surfaces or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.
M&L rendering 15mm thick in 1:6 cement plaster on fair faces of brick work or concrete surfaces is to be finished even and smooth (without using extra cement) complete all as specified & directed by Engineer-in-charge.
M&L rendering 15mm thick in 1:4 cement plaster on fair faces of brick work or concrete surfaces is to be finished even and smooth (without using extra cement) complete all as specified & directed by Engineer-in-charge.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of white cement as primer all as specified & directed by Engineer-in-charge.
M & L preparation of new plastered surfaces of walls and applying two coat of oil bound distember over a coat of primer complete all as specified & directed by Engineer-in-charge.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed by Engineer-in-Charge.
M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base of flooring/ hard standing complete all as specified & directed by Engineer-in-Charge.
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning complete all as specified & directed by Engineer-in-charge. Note :- (i) Pattern of interlocking tile to be rubber moulded or equivalent as approved by GE. (ii) Rate quoted by the contractor shall deemed inclusive of PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) packing and finished even and fair to the sides of pavement.
M& L plain cement concrete 1:2:4 type B- 1(using 20mm graded stone agregate ) cast in situ kerb stone, copings, bed plates, water through and the like including wethering, slightly rounded or chamfered angles and throating including use of form work (straight or curved ) complete all as specified & directed by Engineer-in-Charge.
S & F in repair Bib tap cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia complete all as specified & directed by Engineer-in-charge.
S & F in repair 15 mm Stop valve fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed by Engineer-in-charge.
S&F in repair Viteous China squatting pan, Orrissa, pattern, size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified & directed by Engineer-in-charge.
S&F in repair European type water closet, including plastic seat cover white, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete all as specified & directed by Engineer-in-charge.
S&F in repair 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia & PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified & directed by Engineer-in-charge.
S & F in repair plastic EWC seat cover, coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified & directed by Engineer-in-charge.
S&F in repair vitreous china wash basin white, flat back of size 550 x 400 mm white including waste fittings, brass, chromium plated, coupling, waste pipe, brackets including cutting for and pinning in ends of brackets errect stand, fixing waste pipe complete all as specified & directed by Engineer-in-charge.
S&F in repair pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed by Engineer-in-charge.
S&F in repair PVC connection 450mm long and 15 mm dia with brass fly nut at both ends complete all as specified & directed by Engineer-in-charge.
S&F in repair Vitreous china urinal, half stall type, complete incl providing and fixing plugs bedding urinal against wall in CM1:4 securing urinal to plug with and incl 60mm long brass screws ,pointing around urinal back in cement, incl grating union for discharge pipe complete all as specified & directed by Engineer-in-charge.
S&F steel water tubing 15mm bore dia medium grade galvanised with and including necessary all fittings and fixtures complete fixed to walls, ceilings etc including taking down existing GI pipe of any description complete all as specified & directed by Engineer-in-charge.
S&F steel water tubing 20mm bore dia medium grade galvanised with and including necessary all fittings and fixtures complete fixed to walls, ceilings etc including taking down existing GI pipe of any description complete all as specified & directed by Engineer-in-charge.
Taking down Chowkhats or frames exc. 1.5 sq. m but n.exc 4 sqm each with shutter (without taking off shutters from the frames) complete all as specified & directed by Engineer-in-charge.
S&F Aluminium anodised frame for doors, windows, ventilators and partition in room with one or more rebates including joining cleat for fixing etc complete all as specified & directed by Engineer-in-charge.
S&F aluminium anodised window and ventilator shutters,fixed type without sash bar aluminium section wt 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised snap beading, screws etc, complete all as specified & directed by Engineer-in-charge.
S&F Anodised aluminium door shutters, aluminium section wt 0.55 kg/m including necessary jointing cleats, glazing clips rubber neoprane packing, handles 2 Nos in each door hinges, anodised aluminium snap beading screws etc complete all as specified & directed by Engineer-in-charge.
S&F, 5.5mm thick, sheet glass ordinary quality and glazing in squares exceeding 0.50 sqm in each panes and including hacking out old broken glass of any thickness size, quality or description from metal frames complete all as specified & directed by Engineer-in-charge.
S&F, 3mm thick, sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each panes and including hacking out old broken glasses (any thickness, size, quality or description) from steel/wooden frames, stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.
S & F in repair 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work fixed in any position, complete all as specified & directed by Engineer-in-charge.
S&F solar control film 50 micron reflective type sicked to glass panes as per instruction of manufacturers complete all as specified & directed by Engineer-in-charge.
S&F in repair 125 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified & directed by Engineer-in-charge.
S&F in repair 100mm mild steel 4 Levers mortice lock vertical type complete all as specified & directed by Engineer-in-charge.
S&F in repair Aluminium (Die cast ) body door closer hydraulically regulated, desigantion No. 3, universal type, Suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80Kg complete all as specified & directed by Engineer-in-charge.
S & F in repair 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & directed by Engineer-in-charge.
S&F in repair 250 mm aluminium anodized sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified & directed by Engineer-in-charge.
Supply and fixed in repair aluminium handles, cast type, anodised 150 mm size complete all as specified complete all as specified & directed by Engineer-in-charge.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) of any description, any thicknes including cover fillets and frame work etc, complete all as specified & directed by Engineer-in-charge.
M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. Wire mesh complete all as specified & directed by Engineer-in-charge. Note :- Fillets, metal frame work and G.I. wire mesh paid separately.
S&F anodised aluminium snap grid frame work 605x605mm for false ceiling and hangers 6mm dia, GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastener 12.5mm dia 40mm long complete all as specified and directed by Engineer-in-charge. Note :- (i) Main tee, cross tee shall be 35x25x1.5mm & 25x25x1.5mm respectively. Angle at end all along the walls shall be 40x25x2mm. (ii) Rate quoted by the contractor shall deemed to inclusive of frame work complete.
M & L preparation of new surfaces of ceiling and applying two coat of oil bound distember over a coat of primer complete all as specified & directed by Engineer-in-charge.
S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on and including 5mm thick PVC sheet fillets of width 35mm for wall paneling inclusive of fixing on wall to make frame and including taking down existing wall panelling including frames complete all as specified & directed by Engineer-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and directed by Engineer-in-charge.
S&F glazed ceramic coloured tiles (Joint free) dark shade of size 450mmx300mmx7mm thick on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing coat in CM (1:4) complete all as specified and directed by Engineer-in-charge.
M&L for Non Skid ceramic tiles colour jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified.
M&L for non skid ceramic coloured tiles of size 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6) complete all as specified & directed by Engineer-in-charge.
M&L light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm (including 600mmx600mm size), in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6) complete all as specified & directed by Engineer-in-charge.
GEMRARAMCONTRACTOR
S AND S Constructions
JASOL MAA ENTERPRISES
S K TRADER
AMBEY MAA CONSTRUCTION COMPANY
M/s Shri Inder Construction Company
M/S MAYA CONSTRUCTION COMPANY
Leelashah Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .