PROVN OF STORE ROOM FOR STORAGE OF LPG CYLINDER NEAR BLDG NO P 619 COOK HOUSE AT ARMY AD CENTRE AND SPL REP AND REPLACEMENT OF CERTAIN ELECTRICAL ITEMS AGAINST BEYOND ECONOMICAL REPAIR BER UNDER GE I GOS

Amount

Surface excavation n.exc 30 cm deep and getting out in Soft/loose soil.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil.

M & L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified.

M&L for RCC, (nominal mix) 1:2:4 Type B-1 (using 20mm graded aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed Note - Reinforcement and form work shall be measured and paid separately.

Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

M&L for RCC, (nominal mix) 1:2:4 Type B-1 (using 20mm graded aggregate) as in Columns,pillars,piers,posts and struts etc complete all as specified and directed.

Formwork to Square,rectangular or polygonal rough surface of concrete of sides of pillars, posts, struts, piers, columns and stanchions

M & L 40mm thick PCC 1:2:4 as in Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L for RCC, (nominal mix) 1:2:4 Type B-1 (using 20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M&L for RCC, (nominal mix) 1:2:4 Type B-1 (using 20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

Moorum / Red bajri filling in floors or pavings, laid in layers n.exc15 cm thick spread levelled and rammed incl watering etcall as specified & directed.

Returning, filling in of soft/loose soil including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing surplus excavated earth (soil) to a distance n. exc 50 m & Depositing where directed at a level n. exc 1.5 m above the starting point.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

S&F Mild steel TMT bars 8mm dia and over, cut to length, spacers and binders and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L brick work with fly ash bricks, Straight or curved onplan exc 6m mean radius,built in 1:6 in cement mortar all as Specified and Directed

M&L for rendering 15mm thick in CM 1:6 on brick or concrete surface, finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface, finishing even and smooth without using extra cement but using waqter proofing compound complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling finishing even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 coats of white wash on walls or concrete surfaces including preparation complete.

M&L for two coats of cement based paint after preparation of new plastered surface

M&L three coats of white wash on new plastered ceiling surface including preparation of surfaces.

M&L Hard core of gauge n.exc 63 mm, deposited, spread, levelled in layers not exc 15 cm thick, watered and well rammed to a true surface.

M & L 100 mm thick Cement concrete type D-2, 1:4:8 using 40 mm graded crushed stone aggreates as in flooring finished even and fair complete all as specified and directed.

M & L 50 mm thick Cement concrete type B-1, 1:2:4 using 20 mm graded crushed stone aggreates as in flooring finished even and fair complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6, type C-1 using 20 mm graded stone aggregate as in plinth protection, surfaces finished even and smooth with out using extra cement all as specified.(Note- Joint 12 mm wide to the full depth of pcc shall be provided at every 3 metres and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. cost of this provision shall be deemed to be included in the quated rate for concrete in plinth protection

M & L for water proofing treatment for roof slabs including crumple joints by applying bitumen primer @ 0.3 ltr/sqm then applying bot blown 85/25 @ 1.20kg/sqm and laying APP modified bituminous 3mm thick with non oven polyester core water proofing membrane laid and bonded to the sub-strata by heat process, over lap shall be sealed by flame torch application not less than 3.2kg/sqm with over lap of 100mm and end lap of 150 mm and APP membrane shall be covered with bituminous based aluminium paint @0.2kg/sqm on top complete all as specified and directed.

M&L rendering 10 mm thick in CM 1:3 , mixed with water proofing compound, on concrete surfaces of roof , surface finished even and smooth. (supply only of water proofing compound shall be measured and paid seperately)

Supply only water proofing compound of approved make.

S & F second class hard wood (Sal) plain, solid, straight chowkhats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified and directed.

S & F 35 mm thick second class hard wood rail and style plain, framed, factory made panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and stiles are as per IS – 1003 (Part – I), kiln seasoned & chemically pressure treated complete all as specified and directed.

S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S & F 150 mm long alumunium anodised barrel tower bolts of extruded section complete all as specified and directed

S & F stainless steel Butt hinges "medium weight" steel 100mm size as directed.

S & F alumunium handle fabricated type anodised 150mm long as directed.

S & F aluminum alloy anodized sliding door bolt 250 mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified.

M & L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete as directed.

M&L for Providing precast cement concrete ype B0, 1:2:4 (12.5mm graded aggregate) set in Cement Mortor 1:4 louvres and jallies, 25mm thick (mea sured solid), in?cluding all mouldings and frame

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of grade Fe 410-W (Gde-E-250) Quality-A

M&L preparation of new surfaces of steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Supplying and laying synthetic Rubber insulated mats 2.5 mm thick as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m.

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made for conditions separately ) and including making good the disturbed surfaces to match with existing surface and colour shade with putty for smooth finishing without andulations complete all as specified and directed

One fan point controlled by one switch and one regulator, for material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade (MMS) and including cutting, chasing work at any height and all accessories concealed in walls / roofs / floors / ceiling etc. flush mounting MS/PVC boxes with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.50mm thick suitable for fixing of and including white/Silver/Dark bronze colour modular blanking plate as per number of switch modules flush mounted for fixing of modular switches,sockets,fan regulators, blank plate etc and including above mentioned colour modular plate cover of required modules and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with putty/white cement for smooth finishing complete. Make :- (1).PVC Copper conductor cable FRLSH type :-Finolex / Havells / RR Kabel / Polycab, (2) PVC conduit (MMS) & Accessories ISI Marked :-Presto Plast/Finolex/Kalinga Gold/Plaza. (Note:- All necessary accessories such as modular box,top cover plate, blank plate,MS box,screws,washers and all modular electrical fixtures are used same make/brand only and including cutting & chasing work at any height it shall be deemed in to included in quoted rate only.)

All as per item 46 above but one exhaust fan point controlled by one switch .

All as per item 46 above but one 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

All as per item 46 above but one 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

All as per item No. 46 above, but one 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board, and wiring with 2.5 sqmm and earth conductor of size 1.5 sqmm complete

All as per item No.46 above, but one 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on same board, and wiring with 2.5 sqmm and earth conductor of size 1.5 sqmm complete.

Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed. Make :- Make:- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing modular type switch 16 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed. Make :- Make:- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing modular type socket shuttered type 6 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed. Make :- Make:- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing modular type socket 6 A/16 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed Make :- Make:- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing modular step type fan speed regulator high quality material, 100/120W, 2 module,230volts,AC, 360 degree rotation 0 to 4 or 5 steps, ISI Marked complete all as specified and directed. Make :- Make:- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

M & L for sub main wiring complete with 2 run of 2.5 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade (MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices, junction boxes etc concealed in wall/roofs/floors and including one run of 2.5 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Make :- (1).PVC Copper conductor cable FRLSH type :-Finolex/ Havells/ RR Kabel / Polycab, (2) PVC conduit (MMS) & Accessories ISI Marked :- Presto Plast / Finolex / Kalinga Gold/Plaza Note : - Two run of 2.5 sqmm single core copper conductor cable and one run of 2.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

Supply and fixing sheet steel metal enclosures with socket and plug top and MCBs single pole and neutral enclosure with a two pin and earth plug socket complete with one single pole MCB 20 amps and including removing old unserviceable item complete all as specified and directed. Make :- Make:- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Taking down old unserviceable ceiling fan of any type/size from existing location and deposit in MES store yard and Supply and fix ceiling fan of size 1200 mm sweep,high speed, single phase, 240Volts,AC, 50Hz, BEE not lessthen 4 star rated as approved colour and including hanging GI hook with necessary connecting accessories and testing complete all as specified and directed. Make:-Havells( ES-50) or equivalent in Orient/Kaithan as approved make Note:- Contractor will write in MES No/CA No with date on all FMR/PRB items

Taking down old unserviceable ceiling fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fixing 230 V, 1200mm sweep smart brushless direct current decorative type ceiling fan complete with three blades, down rods, smart electronic regulator, smart remote control operating unit,LED down lights,metalic finish, dust resistant and connected accessories, . Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current copper winding motor, colour as per requirement complete all as specified and directed.Make:-Atomberg ( Renesa ) or equivalent in Havells/Orient as approved make

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix exhaust fan, steel body AC single phase.230Volts of size 300 mm sweep with blades and frame with louvers,holefastners etc complete all as specified and directed Make:- Havells or equivalent in Orient/Crompton and as approved

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix exhaust fan, steel body AC single phase.230Volts of size 380 mm sweep with blades and frame with louvers hole fastners etc complete all as specified and directed Make:- Havells or equivalent in Orient/Crompton and as approved

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply anf fixing exhaust fan made of sturd engineering plastic PVC body complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 300 mm and including providing all connected items complete all as specified and directed. Make:- Havells or equivalent in Orient/Crompton and as approved

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply anf fixing exhaust fan made of sturd engineering plastic PVC body complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 250 mm and including providing all connected items like nuts, bolts and washers etc complete all as specified and directed. Make:- Havells or equivalent in Orient/Crompton and as approved

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply anf fixing exhaust fan made of sturd engineering plastic PVC body complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 200 mm and including providing all connected items like nuts, bolts and washers etc complete all as specified and directed. Make :- Make:- Havells or equivalent in Orient/Crompton and as approved

Taking down old unserviceable wall fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix wall fan 230Volts, single phase, oscillating type, 400 mm sweep, Hi-speed,low noise with blades and outer cover and including providing hanging hook and connected items complete all as specified and directed.Make::- Havells/Usha/Crompton

Taking down old unserviceable air circulators fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix air circulators type fans 230Volts single phase oscillating 450 mm sweep and all connected accessories and including providing hanging heavy duty MS plate/clamp, nuts, bolts and washers complete all as specified and directed.Make:- Almonard/Havells/Usha/Crompton/Polar

Taking down old unserviceable pedestal fan of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix fan farrata type, low noise,smooth functioning with telescopic height adjustment stand ,heavy duty motor,three speed control, 230Volts single phase oscillating 450 mm sweep,1400 rpm high speed and all connected accessories and including providing hanging heavy duty stand complete all as specified and directed.

Taking down old unserviceable pedestal fan of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix fan farrata type, low noise,smooth functioning with telescopic height adjustment stand ,heavy duty motor,three speed control, 230Volts single phase oscillating 500 mm sweep,1400 rpm high speed and all connected accessories and including providing hanging heavy duty stand complete all as specified and directed.Make:- Almonard/Havells/Crompton

Taking down old unserviceable item of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix electric driven,230 Volts, single phase,Refrigerator,double door type smart invertor frost free, 5 star rated, capacity 242 ltr, humidity control,compressor,smart connect,jet ice,anti batirial gasket,70watt complete all as specified and directed.Make- LG/Samsung/Haier or as approved make.

Taking down old unserviceable item of any type/sweep from work site and deposit to MES store yard for safe custody and Supply only bottled water dispenser having option of dispensing hot and cold water with cooling capacity 3 ltrs/hr and tank capacity of 3.4 ltrs,heating capacity 6 ltrs/hr and tank capacity 1.6 ltrs working capacity.Make - Bluestar or equivalent in Voltas/Godrej

Taking down old unserviceable geyses of any capacity from work site at any height and deposit to MES store yard for safe custody and Supply and fix new electric water heater, storage type steel body/plastic body with copper inner tank and heating element upto 2 KW capacity 25 litres, BEE 5 star rated complete with all accessories such as safety valve,thermostat, NRV, connection pipes,holefasterns etc.complete all as specified and directed.Make:- Havells/Crompton/Racold/Venus

Supplying and laying of CPVC /UPVC pipes SDR 11 & Plain SDR 11 incl all fittings of outer dia 16 mm on walls/ceiling or laying in floors and including removing old unservieable item complete all as specified and directed

Supply and fixing stop valve standard of PTMTany colour high pressure screwed ,for iron pipe or CPVC/UPVC and fixed minium weight 15 mm-90gms and including removing old unservieable item complete all as specified and directed

Supply and fixing bib tap standard of PTMTany colour high pressure screwed ,for iron pipe or CPVC/UPVC and fixed minium weight 15 mm-90gms and including removing old unservieable item complete all as specified

Supply and fixing stop valves,cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm dia iron or PVC pipes or for unions and fixed and including removing old unservieable item complete all as specified and directed

Supply and fixing bib taps,cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm dia iron or PVC pipes or for unions and fixed and including removing old unservieable item complete all as specified and directed

Supply and fixing15 mm dia pillar taps,cast copper alloy with capstan heads chromium plated screwed down, high pressure, with or withou lettered hot or cold with long screwed shanks and fly screwed for iron pipes and fixed for iron or PVC pipes and all connected accessories and including removing old unservieable item complete all as specified and directed

Supply and fixing 15 mm dia brass CP mixter for mixing hot & cold water screwed down for iron pipes or PVC pipes and fixed all accessories and including removing old unservieable item complete all as specified and directed

Supply and laying 3 layer PP-R (Poly-Proplene randam copolyermer) outer dia of pipes 16 mm dia, concealed pipes SDR 7.4(PN-16) UV stabilized and anti-microbial fusion welded having thermal stability for hot & cold water supply including all PPR plan & brss threaded polypropylene random fittings complete to walls, ceilings or in floors ect 15 mm dia brass CP mixter for mixing hot & cold water screwed down for iron pipes or PVC pipes and fixed all accessories and including removing old unservieable item complete all as specified

M/S. KISHAN ENGINEERING

M/s M M Engineering Systems

Likitha Enterprises

M/s TECH TEAM

M/s Ats Electricals

M/s MAA BHAIRABI ENTERPRISES

HARAGOURI SUPPLIERS