PETTY REPAIRS WORKS SERVICES TO 820SU 71 RMU 14 P and SU AND BEGAM BAZAR AT AF STN BAMRAULI

Amount

Dismantling of asbestos cement (corrugated, semicorrugated , etc) sheet in roof covering compete all as specified and directed.

S&F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensil strength of 550 Mpa as in roof covering to wall fixed with self tapping screws compete all as specified and directed.

S&F pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensil strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws compete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation. etc) or insulation boards/slabs / blankets, any thickness, including cover fillets compete all as specified and directed.

M&L for 15mm thick fine fissured teglar RH 99 Tringular and acoustic purpose of size 600x600x15mm thick fixed with dash through fastner bolt of approved quality 04 Nos for per sqm including necessary cutting securing and making good complete all as specified and directed. Make Armstrong

S and F in repairs 12mm thick plywood, grade BWR, type BB, fixed with nails complete all as specified and directed.

M&L for 18mm thick celuka PVC sheet minimum 600 Kg sm density grade 1 quality of both side plain white colour rigidiam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instruction to make cabinet sides top and bottom and shelves inside the cabinet including fitting complete ( Each cup board having -04 Nos Aluminium Box Hinge/ PIANO Hinge Handle-2, Hasp staple-1) etc complete all as specified and directed.

Dismantling floor,hearth or wall tiling incl cement mortar bedding but not backing and rubbish off the premises complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white as coloured cement to match and joint free non skid tiles. over and including15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S&F glazed ceramic tiles in vertical surfaces 450x350/7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match rendering 10 mm thick in cement mortar 1:4 on vertical surface as in backing coat complete all as specified and directed.

M & L for chequered cement concrete with tiles of size 20cm x20cm x 25 mm thick over and including 20 mm thick screed bed in cement mortar 1:6 set jointed and pointed in neat cement slurry and pointed with coloured cement to match complete all as specified and directed.

M&L for 20mm thick Granite tile (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shede of granite stone including and polishing over and including screed bed or bedding layer of 15 mm thick for laying floor finished in cement mortar 1:4 complete all as specified and directed.

M & L for Homogenous vitrified light drak shade/double charged/ultra carged coloured flooring tiles 10mm thick of polished area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm in floor etc, laid in floors with cement based adhesive ,set an djointed as per manufacture's instruction over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for HIGHLIGHTER quality vitrified light drak shade/double charged/ultra carged coloured tiles germ free R-digitaltiles of as on exceeding 0.36 Sqm but not exceeding 0.42 Sqm wall set and jointed in neat cement slurry and pointed in coloured cement, over and including rendering 10 mm thick in cement mortar 1:4 on vertical surface as in backing coat complete all as specified and directed. Make Jonson, Orient

Taking down chowkats or fromes exceeding 1.5 sqm but not exceeding 4 sqm each (without taking off shutters from the frames) and removing from site complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 sqm each (without taking off shutters from the frames) and removing from site complete all as specified and directed.

S&F steel window with side hung shutter (mosquito proof) with box type hing, peg stay, lugs, handles, without glazing bars complete including one soap coat of red oxide primer complete all as specified and directed.

S&F steel window with side hung shutter ( glazed) including box type hinges, steel handle, peg stay lugs complete with glazing bars and painted with one soap coat of red oxide primer complete all as specified and directed.

M & L for pressed steel frames (125 x 60mm) for doors with one or more rebates including necessary fixing lungs,hinges,lock strike plate etc & fixed complete all as specified and directed.

M & L two coats of synthetic enamelled paint over a coat of red oxide on steel surfaces over 10 cm width or girth over new/old steel surfaces etc, complete all as specified and directed.

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F factory made PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube suitable for opening as per site condition complete all as specified and directed and shown on page No. 160 of SSR part-II complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement incl 2 Nos aluminium handle 150mm long and 2 Nos aluminium tower bolt 200mm long and 3 Nos aluminium hinges 100 mm long fixed to each shutter complete all as specified in drawing on sl page No 156 of SSR 2010 part -II and directed.

M&L Plain solid straight chowkats and frames rebated and put together with glue pinned joints supplied and fixed of second class hardwood complete all as specified and directed.

S & F Glazed and skeleton shutters rebated and prepare to receive glass gauge, etc., (with sash bars) size of members of shutters as specified in SSR part-I section 8 clause 8.20 (b) supplied and fitted to chowkats, thickness of shutters 30 mm thick of second class hardwood complete all as specified and directed.

S&F Flush shutters 30mm thk, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S & F Glazed and skeleton shutters rebated and prepare to receive glass gauge, etc., (with sash bars) size of members of shutters as specified in SSR part-I section 8 clause 8.20 (a) supplied and fitted to chowkats, thickness of shutters 35 mm thick of second class hardwood complete all as specified and directed.

S&F MS flat iron as in hold fast etc and similar work confriming tp FE 290 Ged E-165

M&L PCC 1:3:6 type C1 (20mm gr agg) as in anchoring hold fast etc bed plate etc all as specified and directed.

S & F galvanised wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm and fixed with tinned tacks or galvanised wire stapples

S & F in repair galvanised wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm and fixed with tinned tacks or galvanised wire stapples

S & F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm each pane (Window Glass) complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed.

S&F door closer, hydraulically regulated, designation No 3 universal type , suitable for door shutter of 851 to 1000mm in width and of wight between 61 to 80Kg and fixed door closer, aluminium (die cast) body etc all omplete as specified and as directed.

S&F in reapir Door closer, hydraulically regulated, designation No 3 universal type , suitable for door shutter of 851 to 1000mm in width and of wight between 61 to 80Kg and fixed door closer, aluminium (die cast) body, complete all as specified and directed.

S&F in reapir double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F powder coating for aluminium anodised window openable fixed type/sliding type weighing not less than 1.35 Kg/RM including 5mm thick glass fixed with rubber gasket the aluminium member of shutter is 65x40mm along aluminium hanlde & tower bolt etc complete all as specified and as directed.

S&F powder coating aluminium anodized grills powder coated with 6x5mm aluminium section having square gap of 100 mm thick with fixing rails of channels 12-15mm complete all as specified and as directed.

S&F powder coating for aluminium anodized door/partly paneled and partly glazed with 4.5mm thick plain glass sheet and 12mm particle board interior grade both side laminated and aluminium section weight not less than 0.55 kg/RM with self closing hydraulic door closer & floor srping etc with complete all fitting complete all as specified and as directed.

S & F in repair drapery rod 25 mm dia with PVC pipe over MS conduit including curtain rings suitable for 25 mm dia pipe & side cups with brackets including fixing arrangements with drilling holes etc complete of approved quality and colour complete all as specified and directed.

S&F in repair venation blind vertical type level or ultima 100mm width of strip with necessary pulling threads aluminium channel along with all arrangement tixed to wall complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed of length of bolt 100 mm complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section of length of bolt 200 mm complete all as specified and directed.

S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 of size 100mm all as specified and as directed.

S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 of size 125mm complete all as specified and directed.

S&F Aluminium handles, cast type, anodised of size 100mm complete all as specified and directed.

S&F Aluminium handles, cast type, anodised of size 150mm complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mm complete all as specified and directed.

Taking down frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site as in aluminium doors / windows complete all as specified and directed.

Taking down frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.0 sqm each and removing from site as in aluminium doors / windows complete all as specified and directed.

Taking down shutters of any description not exceeding 1.0 sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description exceeding 1.0 sqm and but not exceeding 2.0 sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description but exceeding 1.0 sqm and but exceeding 2.0 sqm each and refixing in the same opening complete all as specified and directed.

Taking down shutters of any description but exceeding 1.0 sqm and exceeding 2.0 sqm each and refixing in the same opening complete all as specified and directed.

S&F in repair Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mm complete all as specified and directed.

S&F in repair Butt hinges, cold rolled, medium weight and fixed, of size 75mm complete all as specified and directed.

S&F in repair Butt hinges, cold rolled, medium weight and fixed, of size 100mm complete all as specified and directed.

S&F in repair Aluminium handles, cast type, anodised of size 150mm complete all as specified and directed.

S&F in repair Aluminium handles, cast type, anodised of size 100mm complete all as specified and directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed.

Brickwork with subclass "B" bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 of using class designation 100 of bricks in lieu of 75all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 finished even and smooth with out using extra cement in ceiling complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer including balance area complete removal complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer birla white care Putty on wall obtain smooth finish etc including balance area complete removal complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered wall surfaces and applying one coat of cement base paint on wall surfaces complete all as specified and directed.

M&L for preparation of old distemper surface by washing, rubbing down and stopping of distemper and painted surface and applying one coat oil bound emulsion on wall surfaces white or tinted complete all as specified and directed.

All as per item No 70 Above but one coat of Oil bound distemper on ceiling surface complete all as specified.

M&L for complete removing of existing treatment on wall surface and applying two coats of OBD over athin layer of birla white care Putty on wall obtain smooth finish etc complete all as specified and directed.

M&L for preparation of old plaster surface of wall applying one coat of ACE exterior emulsion paint (Asain paint) on wall surfaces complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based materials of any description over 10 cm width or girthnot otherwise described and applying one coat of synthetic enammel paint complete all as specified and directed.

All as per Item No 74 Above but on steel surfaces

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below and above ground level) and removing the unserviceable materials to a distance not exceeding 100m complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in Sub base flooring/mass concrete/foundation or floor complete all as specified and directed

M&L for 75mm thick for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection , complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (Using 40mm graded stone aggregate) as fdn filling and mass concrete for post holes complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around. In layers not exceeding 25cm, for hard/ dense soil complete all as specified and directed.

S&F steel work in tubular including special shaped washer etc. complete using ERW or induction butt welded yubes conforming to I.S 1161-1979 St grade St-240 complete all as specified and directed.

Disconnecting existing tanks of capacity exceeding 250 but not exceeding 500 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required, reconnecting and re-fixing in position after cleaning and repairing etc.complete all as specified and directed.

S & F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks triple layer,white colour (Cylindrical vertical with closed top) hoisted and fixed in position including dismantling as specified in SSR Part I complete all as specified and directed.

S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) of bore of pipe 20mm complete all as specified and as directed.

S&F in repair Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) of bore of pipe 20mm complete all as specified and as directed.

Taking up or down 15 mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Supply and fixing 15 mm dia bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

Supply and fixing 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

Refixing 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

Refixing 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

M&L for cutting chases brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends and making good cutting exceeding 20cm girth for concealed water tubing or concealed conduit wiring, etc.complete all as specified and directed.

S &F in repairs health faucet, brass, chromium plated with pipe length 1200mm, washers, connections etc. complete all as specified and as directed.

S&F in reapir Vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) and including fixing of the following components viz. pedestal pan with "P" or "S" trap, seat and cover for pedestal pan, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushing rim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper fixed complete all as specified and as directed. Note:- Flushing cistern and flush pipe as required shall be measured and paid for under supply only separately.

S&F in reapir Vitreous china wash basin, white, flat back, size 550mm x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and including fixing of the following components viz. pillar taps, waste fittings and union, plugs and chains and connecting upto supply pipes, wastes or traps, screws, plugs, cement mortar and other subsidary materials required for fixing including cutting for and pinning in ends of brackets but exclusive of fixing of supply and waste pipe fixed complete all as specified and as directed. Note:-(a) Pillar taps and waste fittings as required shall be measured and paid for under supply only separately. (b) Supply and waste pipes as required shall be measured and paid for separately.

S&F in repair Vitreous china squating pan " Orissa pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) incl P or S trap connection to trap, and to flushing pipe anti syphonage pipe etc including making good to floor complete all as specified and directed

S&F in repair PVC valve less, syphonic action type, white low level flushing cistern of capacity 10 litre with inlet ball valve float and handle including brackets and 32 mm dia PVC flush pipe complete all as specified and directed.

S&F in repair Towel Rail 600mm long of aluminium fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 270 gms) complete all as specified and as directed.

S&F in repairs Gun metal, globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed of bore of pipe 20mm complete all as specified and as directed.

Supply only Waste fittings, brass, chromium plated for glazed ware basins etc , with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed of bore of pipe 32mm complete all as specified and as directed.

S&F CP Soap Dish end fixed of bore of pipe 15 mm dia complete all as specified and as directed. Make Catlog No BA-25 MAKE-PRAYAG)

S&F grating doom 100mm dia of CP (Minimum weight 60 Gms) complete all as specified and directed.

S&F grating doom 125mm dia of CP (Minimum weight 70 Gms) complete all as specified and directed.

S&F in repairs Stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore of pipe 15mm complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Supply only 15mm pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe 15mm fixed all as specified and as directed.

S&F in repair 15 mm Bib tap long body with wall flange fancy type chromium plated brass screwd for iron pipe with capstain head complete all as specified and directed

S&F in repair brass Chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union as in repairs complete all as specified and directed.

S&F in repair 15mm dia bore Stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore of pipe 15mm complete all as specified and as directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe 15mm fixed complete all as specified and as directed.

S&F in repair Stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore of pipe 15mm complete all as specified and as directed.

S&F in reapir waste fittings, brass, chromium plated for glazed ware basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed of bore of pipe 32mm complete all as specified and as directed.

S&F in reapir Plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in reapir Plastic water closet seat, coloured, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in reapir PVC water tank cover with fittings suitable for upto 1000 litres capacity complete all as specified and as directed.

S&F in reapir cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. capacity not exceeding 250 ltrs and disconnecting existing tanks settign aside (or lowering if required) , cleaning etc and hoisting if reuiqred reconnecting and refixing in position. compete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. capacity exceeding 250 ltrs but not exceeding 500 Ltrs and disconnecting existing tanks settign aside (or lowering if required) for repairs, cleaning etc and hoisting if reuiqred reconnecting and refixing in position.complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. capacity exceeding 500 ltrs but not exceeding 1000 Ltrs and disconnecting existing tanks settign aside (or lowering if required) for repairs, cleaning etc and hoisting if reuiqred reconnecting and refixing in position complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed

S&F 75 mm bore PVC (SWR) branch piece single 'Y' equal or unequal complete all as specified and directed

S&F 110 mm bore PVC (SWR) branch piece single 'Y' equal or unequal complete all as specified and directed

S & F 75mm bore PVC (SWR) junction single 'T' equal or unequal complete all as specified and directed

S & F 110 mm bore PVC (SWR) junction single 'T' equal or unequal complete all as specified and directed

S & F 75 mm bore PVC (SWR) Vent cowl complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Vent cowl complete all as specified and directed.

S & F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

Resecuring without taking down frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm including replacing rubber neoprene packing, screws, putty and securing hinges except replacement of inserts as in aluminium doors all as specified and as directed. Note:- Supply only hinges and inserts as required shall be measured and paid separately.

Resecuring without taking down frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.0 sqm including replacing rubber neoprene packing, screws and securing hinges / pivot set except replacement of inserts as in aluminium doors all as specified and as directed. Note:- Supply only hinges and inserts as required shall be measured and paid separately.

Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for including cutting reinforcement as required to facilitate demolition all as specified and as directed.

M & L for Mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for Mild steel TMT bars 5mm dia and over, upto and including 10mm dia,cut to length, bent to shape required, as in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for Reinforced cement concrete (nominal mix), in cement concrete 1:2:4, type B1 using 20mm graded stone aggregate as in chajjas all as specified and as directed. Note:- Reinforcement as required shall be measured and paid for separately.

M & L for precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate ) for Man hole cover slab shelves, cooking plateform & similar articles with plain faces & set in cement mortar 1:6.complete all as specified and directed.

Demolition of plain cement concrete in any position including Tar felt or HP tiles in cement mortar bedding etc complete all as specified and directed.

M&L for 25mm thick (average) PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in roof padding, benching existing roof slab laid to slope as per existing or as directed including finished surface even & fair complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:4) over concrete surfaces of roof, mixed with 5% liquid water proofing compound by weight of cement or as per manufacturers instruction including finishing surfaces even and smooth without using extra cement complete all as specified and directed.

Provision of Roof treatment consisting of the following items and operations :- (a) Cleaning the roof surface from dust / dirt and any other foreign materials and applying a coat of bituminious primer @ 0.30 liters per square meter uniformily after the surfaces fully dried complete all as specified and directed. (b) M&L for applying a coat of hot blown bitumen grade 85/25 conforming to IS 702 over primed surface of roof slab @ 1.20 Kg/Sqm complete all as specified and directed. (c) M&L for APP based polymeric water proofing membrane minimum weight 3 Kg / Sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/Sqm or as per IS), laid over hot bitumen surface by torched application with the strict supervision of manufacturers technical supervisor including cutting & chasing 100mm x 75mm in the parapet to insert the APP membrane and sealed with and including PCC (1:2:4) type B-0 (Mixed with and including polymer based liquid water proofing additive @ 5% by weight of cement or as per manufacturer’s specification). Membrane shall be laid with 100mm side/end lap on prepared surfaces as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer.

Preparation of new APP based polymeric water proofing membrane surface applying one coat of aluminium paint complete all as specified and directed.

M&L for cutting chases, pinning in making good to facings in concrete n.exc 75 mm wide and 65mm depth for tubing in water proofing felt where required and pointing in CM 1:3 and finishing complete in brick walls or concrete complete all as specified and directed.

Demolition of cement concrete (unreinforced ) in above ground floors n exc 15 cm thickness complete all as specified and directed.

M&L for treating the sunken floor with preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying consisting of the following operation (a) 10mm thick plaster/screed bed in cement mortar 1:3 complete mixed with water proofing compound as per manufactures instructions complete all as specified & directed (Note- WPC shall be measured and paid separately) (B) Cleaning floor surface by wire brush brooming & removing dust & shall be painted with a coat of bituminous primer conforming to IS; 3384-1986 @ 0.3 Ltr per sqm uniformily complete all as sfd & directed (c) After primer the entire roof surface applying tack coat of hot blown bitumen grade 85/25 grade conforming to 702-1988 @ 1.2 kg per sqm over primer (d) Over hot bitumen laying polymeric water proofing membrance consisting of 90 to 100 micron thick center core of HMHDPE Film with standard weight not less than 3 Kg per Sqm over entire area laid with 100mm side lap/end lap on prepared surfaces as per manufacture's technical instruction & sealed complete all as sfd & directed (e) Again the entire floor surface applying tack coat of hot blown bitumen grade 85/25 grade conforming to IS 702 @ 1.2 kg per Sqm

M&L for cement concrete 1:5:10, type E-2 (using 40 mm graded stone aggregate) as in , sub base etc mixed with 5% liquid water proofing compound by weight of cement or as per manufacturers instruction including finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M & L 25mm thick PCC 1:2:4 type B-0 using 20 mm graded stone aggregate as in leveling course to floor complete all as specified and directed.

40 mm thick PCC 1:2:4 type B-2 (Using 40mm graded stone aggregate) as in flooring finished concrete surface spike rolling to surface or making impressions of expanded metal, whilst the concrete is green.

S&F fiber glass reinforced translucent 2MM thick corrugated sheeting with corrugations matching with galvalume sheet and fixed with screw all as specified and directed.

S&F in reapir PVC 32mm dia waste pipes all as specified and directed

M&L for making POP cornices 100mm wide of required design as directed by Engr-in-charge complete all as specified.

S&F in repairs mortice lock vertical type 100mm 7 levers all as specified and as directed.

S&F POP false ceiling over GI snap grid permiter wall channel 25x25m fixed on wall all round, GI main ceiling channel with flange 50x25mm @ 250mm C/C, cross GI channel section 25x12 mm @ 750 C/C alongwith the suspenders of GI angle 25x25 mm @ 1200 mm C/C. The 20 to 25 mm thick POP lath pastering over n. less than 0.56 mm thick wire gauge in complete ceiling incl form work. Ration of POP and wall putty (1:10) and applying two coats of oil bound distemper incl chalk whitening and priming in alkali restant incl preparing the surface complete all as specified.

Welding in repair thickness of metal to be welded exc 6mm but nexc 9mm size of length exc 2.5 cm but n exc 5 cm in length

Dismantling wrought iron or mild steel work of any description

S&F for coloured 12mm toughed glass doors/window including eatching all necessary fiting fixuters & Godrej or link 7 lever lock self , including BIOMERTIC LOCK any size/ type complete all as specified and directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

M/S KESHRI WORKERS

M/S SWASTIK BUILDERS

R K CONSTRUCTION COMPANY

M/S Aquarius Construction

M/S SURISONS

M/S SATISH KUMAR

M/S AM ENTERPRISES