ADDN / ALTN TO ROOM NO 23 COMMAND CAFETERIA AND CERTAIN CONNECTED AREAS AT HQTC BANGALORE

Amount

M &L for providing cement concrete type B1,1:2:4 (20 mm graded aggregate) as in copings including formwork etc all as specified and directed.

M&L for Pre-cast cement concrete block type C1 1:3:6 (20mm graded stone aggregate) masonry with solid blocks, exc. 10cm in width and setting in mortar 1:6 complete etc all as specified and directed.

M&L for providing precast cement concrete solid building blocks type C1 1:3:6 (20mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar 1:4, complete in walls etc all as specified and directed.

M&L for reinforced cement concrete type B1-1:2:4 (20mm graded aggregate) as in beams, cantilevers, slab, bressummers, lintels over 1.5m span etc all as specified and directed.

Supply only integral water proofing compound

Cutting chases, pinning in stone/ concrete block/ RCC slab wall making good to facings where required and pointing in ement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth etc all as specified and directed.

M&L for 20mm thick Granite of any type work (table rubbed and polished) in cooking plateform, widow sill, step, wall lining and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade granite incl 15mm thick mortar in CM 1:6 etc all as specified and directed.

M&L for form work to sides and suffits of floor or roof beam, beam haunchings, girders, bressumers, lintels, cantilevers, shelves, including supports overhangs, etc finished rough in flat surface etc all as specified and directed.

S&F in repairs second class hardwood as in plain fillets square, rectangular or triangular in section exc 13 & n.exc 25 sqcm, clean sawn, secured with screws or brads etc all as specified and directed.

S&F for cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles n.exc 5Kg each etc all as specified and directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc all as specified and directed.

Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required on vertical stone masonry wall: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps;hold fasts; wall ties; hooks forhanging fans; plain angle cleats for securing purlins to woodtrusses or rafters; knee pieceinserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 etc all as specified and directed.

Mild steel screw bolts, diameter of neck in 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and n exc 15cm long etc all as specified and directed.

M&L MS TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending and binding with MS wire annealed not less than 0.9 mm dia all as specified and as directed etc all as specified and directed.

S&F steel work in tubular trusses including special shaped washer ect. complete using ERW or indluding butt welded tubes conforming to I.S.1161-1998 grade St-240 etc all as specified and directed.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc all as specified and directed.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no). hinges type B-21 100mm long (2 No.) suitable handle (1No) etc all as specified and directed.

M&L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry etc all as specified and directed.

M&L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry etc all as specified and directed.

S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in-charge.

S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall or in door, fixed with self tapping screws etc all as specified and directed.

S&F false ceiling at any height 600mm x 600mm x 15mm Armstrong/ Everest mineral fiber tegular ceiling tiles of type classic lite RH- 99 laid on Armstrong/ Everest prelude XL exposed grid system with 9 mm wide T section flanges color white. The framework comprises of main runner spaced at 1200 mm centre. Hanger (GI wire) to be fixed by approved roof plug and screws etc. The last hanger at the end of each main runner should not be greater than 450 from the adjacent wall. Flush fitting 1200 mm long cross tees (with double stitching) to be interlocked between main runner at 600mm center from 1200x600mm modules. Cut cross tees longer than 600mm to be supported independently 600mm x 600mm modules to be formed by fitting 600 mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong/ Everest wall angle secured to walls at 450 mm maximum centers etc all as specified and directed.

S&F false ceiling in 2 to 3 layers at any height by fixing 12 mm thick Gypsum Board sheets on frame work of GI sheet section. The main runners of 22 gauge GI sheet and cross runners of 24 gauge GI sheet must be framed to form a mesh of 50mmx50mm c/c. The Gypsum Board must be fixed to the GI frame and joint to be properly filled in with POP paste and paper tape to get a leveled smooth ceiling. Recessing of the Gypsum Board for light fixtures must be done along with extra frame work of GI sheet section to hold the concealed light fixtures etc. including cost of two or more coats to give an even shade of plastic paint on ceiling with putty work complete with designer ceiling (with part ply,laminate and cove) etc all as specified and directed.

Taking down old damaged existing water proofing membrane of any thickness from roof top complete all as specified and directed.

M&L for water proofing treatment on horizondal or vertical surfaces by applyong oil bound bitumen primer & 0.20 Kg/Sqm and providing 4 mm thick APP modified water proofing membrane weighing not lesss than 4 Kg/Sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm including minimum 10 cm side lap and 15 cm end lap torch sealed and bonded and applying a coat of blown grade hot bitumen 90/15 over and below the membrane @ 1.20 Kg/Sqm over RCC roof slab/ projection/ parapet after cleaning the surfaces by removing dust dirt etc as manufactures instructions complete all as specified and directed.

M&L for cutting holes in circular section for inserting 150mm dia rain water PVC pipe on vertical stone masonary wall of 400 to 600mm thickness by mechanical means etc all as specified and directed.

S&F in repairs 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers only one face has decorative veneer fixed with nails over 12mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work including French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats etc all as specified and directed.

S&F Prelaminated medium density fibre particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc all as specified and directed.

S&F in repairs second class harwood teak finish beading/ hand rail decorative antique finish in section n.exc 13 sqcm, clean sawn, secured with screws including french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coat etc all as specified and directed.

S&F in repairs second class harwood teak finish beading/ hand rail decorative antique finish in section exc 13 & n.exc 25 sqcm, clean sawn, secured with screws including french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coat etc all as specified and directed.

Supplying & fixing of Intermat auto closing concealed hinge, complete all as directed. Make: Kutchina'/Hettich/Hafele

Supply & fixing of 6" premium quality crome finish Handle, complete all as directed. Make:- Kutchina"/Hettich/Hafele

Supply & fixing of good quality Telescopic channel set for drawer multi-tech high capacity 500 mm long etc all as specified and directed. Make :- Kutchina"/Hettich/Hafele .

S&F 19-20mm wide and 0.80mm thick decorative type PVC beading complete all as specified and directed.

S&F visionglass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as specified and as directed by the Engineer-in Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc all as specified and directed.

M&L for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in flooring, foot path, hard standing, plinth protection, bases of water tanks etc all as specified and directed.

M&L for 40mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as in flooring all as specified.

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as in flooring etc all as specified and directed.

M&L for Virified endura tiles 15 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of CM 1:6 etc all as specified and directed.

M&L for Virified tiles dark shade/ double charged/ ultracharged 8-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of CM 1:6 etc all as specified and directed.

All as per item No 41 but as in skirting over and including 10mm thick rendering on brick work or concrete surfaced wall as backing coat of cement mortar 1:4 etc all as specified and directed.

M&L for Virified tiles dark shade/ double charged/ ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of CM 1:6 etc all as specified and directed.

All as per item No 43 but as in skirting over and including 10mm thick rendering on brick work or concrete surfaced wall as backing coat of cement mortar 1:4 etc all as specified and directed.

M&L for glazed ceramic coloured/ digital/ stone finish wall tiles in vertical surface 350x250x7mm/ 450x300x7mm/ 600x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering on brick work or concrete surfaced wall as backing coat of cement mortar 1:4 etc all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc all as specified and directed.

M&L for rendering 15mm thick cement plaster in cement morter 1:6, on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement etc all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. Including racking out joints, hacking for key, scrubbing down with water, etc all as specified and directed.

M&L for 2 coats of Distempering wall with distemper oil emulsion white or tinted over a coat of 1mm thick wall care putty, including preparation of new surface etc all as specified and directed.

Two coats of weather proof exterior emulsion on old decorated surfaces of walls, pillasters, roof projections, facias, drops, chajjas, etc., including necessary preparation of surfaces by washing, rubbing down and stopping all as specified and as directed.

M&L for 2 Coats of Distempering wall with distemper oil emulsion white or tinted over a coat of 1mm thick wall care putty, including preparation of old surface after complete removal of existing treatment etc all as specified and directed.

S&F Sheet glass, of 4mm thick ordinary quality and glazing with oil putty in square in each pane etc all as specified and directed.

M&L for two coats of synthetic enamel paints over a coats of red oxide primer including prepration of new steel surfaces of any description over 10 cm in width or girth not otherwise described etc all as specified and directed.

Preparation of old painted surface of any description not otherwise described steel and iron surface over 10 cm width or girth and applying one coat of synthetic eanmel paint etc all as specified and directed.

S&F 15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including Taking up or down steel tubing and connections, including cleaning for refixing or removal to store etc all as specified and directed.

All as per item No 55 above but 20mm bore etc all as specified and directed.

S&F grating doom 100mm dia with or without waste hole of crome finish etc all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm etc all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / wall in any length laid in trenches or in floor or fixed with wall all as specified and directed.

S&F PVC (SWR) pipes 150mm bore, single socketed, in any length with rubber ring joints, fixed to wall etc all as specified and directed.

S&F 150mm bore PVC (SWR) bends of any radius all as specified etc all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) bends of any radius all as specified.

S&F in repairs 75 mm bore PVC (SWR) Junction single (Single T) equal or unequal all as specified.

S&F in repairs 75mm diameter of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement etc all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc all as specified and directed.

S&F in repairs Low density polyethylene (LDPE) pipes 32mm dia, of pressure rating 6 kgf/sq. cm etc all as specified and directed.

S&F in repairs Table Top Basin, Size: 565x425x140 mm etc all as specified and directed. Make Jaguar Model KUS-WHT-35935 or equivalent in CERA/ Parry ware/Hindware

S&F in repairs premium quality Bib Cock with Wall Flange etc all as specified and directed. Make Jaguar Model OPP-15037PM/ ORP-10037PM or equivalent in CERA/ Parry ware/Hindware

S&F in repairs premium quality Angular Stop Cock with Wall Flange etc all as specified and directed. Make:- Jaguar Model OPP-15053PM/ ORP 10053PM or equivalent in CERA/ Parry ware/Hindware

S&F in repairs premium quality Pillar Cock with Wall Flange etc all as specified and directed. Make Jaguar OPP-15021PM/ ORP 10021PM or equivalent in CERA/ Parry ware/Hindware

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dresses stonework and precast concrete articles etc all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons incl granite slab in kitchen platform Laid, bedded and pointed in any mortar etc all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for etc all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work etc all as specified and directed.

Dismantling structural/ mild/ wrought steel work including doors, gates but excluding framed truss etc etc all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

Demolition mud/ mud phuska in roofs, any thickness, including plastering, tiling and leeping (whether full thickness removed or only a part thereof) etc all as specified and directed.

Removing demolished material i.e. building materials, concrete, stone masonary, debris, tree roots, trunk, branches of any size etc. to a distance of 30Km or beyond, out of premises of metropolitan area, including loading, unloading by manually or by mechanical means (JCB) and to be transported through tractor-trolly or tipper and stacking at the destination as and when directed by Engineer-in-Charge.

Taking down carefully copper/aluminium point wiring (light fan socket or power) complete including fittings such as switches, ceiling rose, pendants, regulators, sockets, light fittings complete as directed and removing retrieved materials and making good the disturbed surface all as specified and as directed.

Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including heavy grade with recessed PVC conduit ISI marked as approved with all accessories and fixing arrangements on wall/ceiling on wall with acessories like modular metal flush board, modular white cover etc, fixing on wall surface for housing switches/sockets/regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :-

One light point controlled by one single pole 5 Amps switch

One fan/ exaust fan point controlled by one single pole 5 Amps switch

One switch socket out let point 5 Amps on independent board

One switch socket out let point 5 Amps on same board with other switches

Four light point controlled by one single pole 5 Amps switch

Point wiring with cable of PVC insulated FRLS copper multistranded conductor 2.5 sqmm 1100 volts grade in and including heavy grade with recessed PVC Conduit ISI marked, broken white/or of cream /grey colour. with all accessories and fixing arrangements on wall/ceiling surface on wall with acessories like modular metal flush board, modular white cover etc, fixing on wall surface for housing switches/sockets/regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for one 15A Switch Socket Combination on independent board all as specified and as directed.

M&L for cutting Chases in wall/ ceiling for point wiring all as specified and directed.

Supply and fixing PVC ceiling rose 65 x 50 mm surface type with 3 terminals all as specified and directed.

Supply and fixing modular swichone way 6 Amps, 230 volts all as specified

Supply and fixing modular socket, 6 Amps 2/3 pin combined two module, 230 volts all as specified

Supply and fixing modular socket, 6 A/16 Amps 2/3 pin combined two module, 230 volts all as specified

Supply and fixing modular swich one way 16 Amps one module, 230 volts all as specified

Supply and fixing modular white cover suitable with frame 2 module etc all as specified and directed.

Supply and fixing modular white cover suitable with frame 4 module etc all as specified and directed.

Supply and fixing modular white cover suitable with frame 6 module etc all as specified and directed.

Supply and fixing modular white cover suitable with frame 8 module etc all as specified and directed.

Supply and fixing modular metal flush board 1/2 module etc all as specified and directed.

Supply and fixing modular metal flush board 4 module etc all as specified and directed.

Supply and fixing modular metal flush board 6 module etc all as specified and directed.

Supply and fixing modular metal flush board 8 module etc all as specified and directed.

Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings etc all as specified and directed.

Supply and fixing single phase and neutral enclosure with a two pin and earth plug and socket complete with one 20 Amps single pole MCB etc all as specified and directed.

M&L for taking down carefully Spilit type Air conditioner from wall/ceiling etc and refixing along with any minor fixing acessaries and addl gas charging etc all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver threecore flexible copper conductor cases of suitable size etc all as specified and directed.

Supply and fixing LED Spot lights (Mirror type) fitting 1x 7W, 300mm, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose etc all as specified and directed.

Supply and fixing LED Track lights fitting 1x 12W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose etc all as specified and directed.

S&F Wall mounted fan 400mm with oscillation complete with all fixing accessaries etc all as specified and directed.

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete etc all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete etc all as specified and directed.

Supply and laying of sub main wiring with 5 single core PVC insulated cable with copper conductor multistranded 1100 volt grade 4.0 sqmm in PVC conduit/ casing caping and including 2x4 sqmm PVC insulated multistranded copper conductor and connecting to main earth dolly complete all as specified and directed

Rigid non-metallic PVC conduit 25mm inclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc etc all as specified and directed.

M&L for dismantling the fire alarm cables with acessories, duly disconnecting the incomming and outgoing cables all as specified by Engineer-in-charge.

M&L for Chassis cutting in wall/ ceiling for submain wiring/ conduits etc all as specified and directed.

Supply , install and tesing of wall split units indoor/outdoor complete with cordless remote control unit and with filter for better indoor air quality with minimum 5 star rating inverter model capacity 2.0 TR complete all as directed and specified. Make:- Usha-Daikin/Hitachi/Voltas/Blue Star/Carrier.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5.0 KVA etc all as specified and directed. Make:- V-guard/Vinitec/Automatic Electrical/Power Ware, Meerut

Cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise superficial area n. exc. 100 sqcm and surface finished with CM 1:3 complete all as directed.

M&L PCC 1:2:4 type B-1 apex stones, bed plates, kerbs not provided for water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc.(Fe-410 , complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed.

Cutting channels, grooves or rebates n exc 15cm girth, in stone wall and trimming surface without re-inforced and surface finish with CM 1:3 complete all as directed.

Surface excavation n.exc 30 cm deep and averageing 15 cm deep and getting out in soft/loose soil.

M&L for coloured Chequered cement concrete tiles 30cm x 30cm x 22-25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified & directed.

Supply and Fixing of Geyser 25 Litres Capacity Suitable for high pressure upto 8 bar, 2 Kilowatts, Powder coated metal body, Temperature indicating dial, fire retardant cable, Efficient long life Copper heating element, Shock proof & Rust proof ABS body, 5 Star rated Complete all as specified and as directed. Make BAJAJ, Model : SHAKTHI GPV, CODE : 150747 or Equivalent make in HAVELLS/CG/RACOLD

Supply and fixing of Switch unit suitable for AC, 20 Amps Make : LEGRAND, 675558 or equivalent

Supply and Laying of CPVC pipes 16 mm dia SDR 11 & plain CPVC SDR 11 fittings, for connection of Inlet/Outlet pipe to geyser

Supply and Laying of CPVC pipes 20 mm dia SDR 11 & plain CPVC SDR 11 fittings, for connection of Inlet/Outlet pipe to geyser

Supply & fixing of Stop valves 15 mm dia, Cast copper alloy, Screwed down, high pressure with handle for pipes

Supply and fixing and testing of totally enclosed dry type air cooled floor mounted industrial 10KVA three phase isolation transformer having winding ratio of 1:1 , voltage rating 415v/415V Δ-Y, F class insulation,pure copper winding , suitable for all power factor , including termination and testing complete all as specified and directed Make : Servocom or Equivalent

M & L for sub main wiring from street light to junction box with two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 2.5 sqmm in and including heavy grade PVC conduit and its accessories with fixing arrangements on pole surface, wall, ceiling etc including 2.5 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC casing capping and two run of copper conductor together taken as one length for measuring unit length.

Supply and fixing sheet metal enclosure for mounting 1 Nos MCB FP including termination and testing complete all as specified Make Havells cat No DHDESFP or Equivalent in L&T/Schnider

S & F MCB, 4 poles 415 Volts, 5-32 Amps, 10 kA, 50 Hz, AC, connecting up incoming/out going cables with suitable lugs and testing complete all as specified and as directed. Make:HAVELLS/STANDARD/INDOASIAN/L&T/SCHNIDER

M&L for Earthing complete with copper earth plate 60 cm x 60 cm x 3.15 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr filled around with layer of charcoal dust and salt and connected to GI wire 4mm by means of bolt nut and cheek nuts and washers of galvanized iron or steel and thimble and other ends of the earth strip connected to main switch board and protected by galvanized iron pipe light grade 40 mm bore and watering pipe 20mm dia light grade with funnel and wire mesh pcc 1:3:6 in chambers RCC 1:2:4 in pit cover reinforecd with 8 mm dia deformed bars 15 cm center both ways all as directed by Engr-in-charge.

Raashi Constructions