Research Centre for Conserve the Palm-Leaf

Amount

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls

Brick / Stone Masonry in lime mortar walls under 3m high

Dismantling Plain Cement Concrete

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick wall watered, rammed and consolidated etc. Complete complying with standard specifcation and as directed by the department officers.

Cement concrete 1:5:10 (one cement, Five creushed stone sand and Ten hard broken stone jelly) using 40mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15ck thick well rammed, consolidated and curing etc. complete complying with standard specifications.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Brick work in Cement Mortar 1:6 uing best quality II class ground moulded chamber burnt bricks of size 9"x4-3/8" x 2.3/4" for foundation and basement including curing etc., complete complying with standard specification.

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (platiciser / super plasticiser ) in recommended proportions as pr IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with above (4.79 cum) 7670kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the

Supplying and erecting shuttering for sides and soffits including necessary supports for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild steel angle of size 25mm x 25mm x 3 mm for boarding with minimum support etc. complete complying with the standard specification. (Payment for centering shall be given after the concrete is laid)

Supplying, fabricating and placing in position Mild steel / Ribbed Tor steel grills for all RCC works as per design given including cost of steel and G.I. Binding wire in all floors etc. Complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20mm thick cement mortar 1:3 (one cement and Three crused stone sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3kg /sq.m etc., complete complying with standard speficiations. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Plastering with Cement mortar 1:5 (one cement and Five plastering sand), 12mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing mild steel for grill gate and MS box section of size 150mm x 150mm of height 3mm including cost and conveyance of all materials and fixing in position including priming coat etc. Complete complying with standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrdes etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specifiation. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works).

Painting two coasts of newly plastered wall surface with ready mixed plastic Interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scapping, clean removal of dirt and including necessary plaster of paris puty, wherever required etc., complete complying with standard specification.

Supplying and Paving the Paver Block flooring using Rubber mould paver block (colour) of standard size over the M-sand filling of 83mm thick, including laying compacting with power machine including loading transportation and colour pigments of paver blocks, including cost and conveyance of all materials labour etc complete with standard specification.

Supplying and fixing in position white European Water closet of best quality and approved make with 100 mm"P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with all fittins such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.

Supplying and fixing solid Teak wood open manuscript (Olai Suvadi ) storage unit Temple type as per the drawings and designs approved by the departmental officers. All the storage frames are made of 75mm x 25mm teak wood of best quality. The Shelf panel and vertical panels are provided with teak wood planks of 18mm thick and Aluminium Composite Panel Wooden grains model 4mm 0.25mm thick for back Sheet approved by the executive Engineer. The rate includes cost of materials, labour charges, Fixing charges and all other incidental charges etc., All materials Should be got approved by the Executive Engineer before use on works.

Providing wooden melamine polish for main door new wood by removing by blade scrapping the existing dirt from the wooden surface sand paper with m50 and repeat m80 paper to get a smooth surface leaves at least 4 hours drying sand paper and prepare surface by m100 and clear the surface apply one coat of touch wood strainer by brush and leaves for two hours. For drying prepare the surface by m100 sand paper and apply one coat of ash sanding sealer mixed with approved quality thinner after drying apply one coat of sanding sealer and attend the surface to get thoroughly dried smoother surface with no.220 water emery wood cleaner fill the holes and dots by putty and packing to get the surface clean apply surface by wax emery no.220 apply first coat of melamine sealer with the thinner for preparing the surface and apply second coat of the same by dry ect., all complete as specified and as directed by the Engineer-in-Charge.

Wooden Partition : ( OST + Plywood + Aluminium frame + OST + Plywood) Supplying and fixing of wooden partition ( Partly paneled and Partly Glazed ) using New Aluminium, frames section of size 50 mm x25 x 1.50 mm horizontal and vertical members are equal spaced at 60cm from floor level, panels should be covered with 12mm thick Plywood of best quality on both sides and fixing 3.5mm thick OST sheet with melamine polish finish over the Plywood panel and partly 8mm Clear Glass with wooden beading finish using necessary hardwares like fevicol, nails, Alu cleat Angle,Ancher Fastner, self threaded Screws etc. the rate including cost of all Materials and labour charges for cutting and fixing the Aluminium box section,12mm thick plywood, , 3.5mm thick OST sheet and necessary cutting for switch box A/C box fittings and complete. The quality and colour for the all items involved are got prior approval from the executive engineer.

Supply and installation of calciumboard wall panel work .Having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all ceiling level and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is - 63400 rate shall included to fix the main frame with necessary clamps, with 12mm thick calcium silicate boards as a base frame. Rate shall included Aluminium frame, Calcium silicate panel , All complete complying with Necessary hardware erection at your site including all labour cost etc., Specification as directed by departmental officers.

Supply and installation of 75mm thick calciumboard partition work .Having having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all ceiling level and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is - 63400 rate shall included to fix the main frame with necessary clamps, with both side fixing 12mm thick calcium silicate boards as a base frame. Rate shall included Aluminium frame, Calcium silicate panel , All complete complying with Necessary hardware erection at your site including all labour cost etc., Specification as directed by departmental officers.

Providing Cup-board Shutter with frame using Tw frame of 75mm x 25mm with 25mm thick fixed the shutter the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

Manufacturing and supplying of T.W, Display rack as per the drawings and designs approved by the departmental officers. The following specifications and sizes. Overall Display size :2400mm x 900mm x 21000mm , 1) Bottom Storage cupboard Size 2400mm x 900mm x 600mm. 2 ) Middle Display Rack Size 2400mm x 900mmx 1400mm (slot type ). 3 ) Top Open Storage Size 2400mm x 400mm x 400mm . Use of TW frame 75mm x 25mm , Vertical panel 19mm thick, Shutter panel 25mm thick, Shutter frame 63 x 25mm thick with 5mm thick clear glass The following specification and sizes necessary Brass Hinges , Brass handle with locking arangements ec., complying with standard specification. The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.

Manufacturing and supplying of T.W, Executive Tableof size :1500mm x 750mm x 750mm of 18mm thick Plywood with Laminated top. The following specification and sizes 1) Front vertical members made out of 50mm x 50mm 2) Horizontal members of Table 50mm x 25mm 3) The intermediate members leg to leg made out of 50mm x 25mm. All Three sides were covered with Teakwood plank and the members are finished with an ornamental design and carving works. All Inner portion with polish finish etc., complete complying with standard specification. The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.

Manufacturing and supplying of T.W, Reception tableof size :1200mm x 750mm x 750mm of 18mm thick Plywood with Laminated top. The following specification and sizes 1) Front vertical members made out of 50mm x 50mm 2) Horizontal members of Table 50mm x 25mm 3) The intermediate members leg to leg made out of 50mm x 25mm. All Three sides were covered with Teakwood plank and the members are finished with an ornamental design and carving works. All Inner portion with polish finish etc., complete complying with standard specification. The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.

Manufacturing and supplying of Fancy type push back with hydraulic adjustment chair of modular wood size 20" x 19" x 32" with arms. The seat and back rest shall be provided with cushion made of leather foam including arms. The rollers are fixed at bottom base for easy movement. The rate inclusive of cost of all materials, labour charges, transportation, taxes as applicate and supply @ site of work as directed by the departmental officers.

Manufacturing and supplying of Mid back with hydraulic adjustment chair of modular wood size 20" x 19" x 32" with arms. The seat and back rest shall be provided with cushion made of leather foam including arms. The rollers are fixed at bottom base for easy movement. The rate inclusive of cost of all materials, labour charges, transportation, taxes as applicate and supply @ site of work as directed by the departmental officers.

Manufacturing and supply of Teakwood Visitor chair PU (Polyurethane) cushion seat and Chushion / Knitted back for Staff Teak wood frame 2"x2" for legs,3"x2" for seat and back frame PU polished with natural teakwood finished .The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.

Supplying and fiixng of vision glass panel work use of 8mm thick glass panel and teak wood beading with melamine polish finsh.The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.

Fabrication and supplying of Center Lab Display Steel table of size (1800mm (L) x 900mm (D) x 1800mm (h) - 900mm Table Height with 900mm Stand height ) 38mm MS square tube frame work of standardised and customised for Lab room. Body: 20 gauge CRCA sheets, Door: 18 Gauge CRCA Sheets, Coating: Enamel Spray coat with oven dry after the treatment of primary coat, Lock: ISI Grade Aligarh/equivalent Branded lock and Handle.The top of table shall be Ganite of 18mm thick and rigidly fixed on the MS frame work. Provide Gas line and water line depth. 4 Nos of nylon bushes should be fixed at the bottom of legs. All joints should be grinded smoothly and applying of electro powder coated with the colour as specified by the department officer. The rate inclusive of cost of all materials, welding charges, bending charges, labour charges, electro powder coating, transportation as applicable and supply to worksite etc., complete.

Supply of teak wood stool size of500 - 600mm height . Used material for leg and bottom frame and top frame 38mm x 38mm and stool top 18mm thick Ply wood with lamination finish with 2mm edge tape panding . The rate excluding of all taxes and including cost of all materials, labour , Transports and other incidental charges, including providing in the position to the rooms as directed by the departmental officers.

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC casing and caping on wall and ceiling with PVC accessories on wall with modular switch box and 5A 1M switch in flush with wall with cover plate sheet cover and making good of the partly concealed portion with painting of suitable colour.

Supply and fixing of single Box type luminaire consta Type 4'40W LED with steel rope with peruls suspension complete with TW round block on ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end)

Supply and fixing of Surface mounted spotlight Zava with COB, system power:25W, luminous flux of luminaire 1750lm (without Honeycomb reflector the luminous flux is 2500lm), colour temperature of 3000K, Warm White, CRI>80, constant current driver, direct light emission, clear glass cover with Honeycomb reflector, 36-degree beam angle, housing in die cast aluminium, polyester powder black coloured coat applied over a 5-stage pre-treatment, flexible light body structure can be rotated and adjusted in the horizontal and vertical direction, electronic control gear.(Higher end)

Supply Installation Testing and Commissioning of flexible LED strip with system power of 39W. The luminaries shall be with CRI >80 with CCT of 2700K. The light distribution shall be wide beam with system efficacy of>80lm/w (+/- 10%). The luminaire housing color should be black. The luminaire shall be with IP20. The luminaire shall be operable from 24V DC with class III.

Supply Installation Testing and Commissioning of IP65 or above rated driver with 24V DC output and the input voltage shall be 100 to 277V. The output DC voltage not less than 150W. Equivalent to Meanwell HLG series.

Supply Installation Testing and Commissioning of aluminium mounting track for the flexible LED strip. It shall have the dimension (Length x Width x Depth) shall be not larger than 1000x15x10mm.

Supply and fixing of 1200mm(48") AC ceiling fan complete with stepped electronic 300W regulator with 1meter down rod on the existing clamp

supply and fixing of 20A one way module switch with front plate on existing switch board

Supply and run of 2 of 1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100Vgrade in suitable PVC rigid pipe on wall and ceiling with continuous earthwire connection1.5 sq.mm copper wire with painting of suitable colour.

Supply and run of 2 of 2.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100Vgrade in suitable PVC rigid pipe on wall and ceiling with continuous earthwire connection2.5 sq.mm copper wire with painting of suitable colour.

Supply and fixing of one way one module 16W switch with cover plate on suitable module box on wall with connection

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100Vgrade in suitable PVC rigid pipe on wall and ceiling with continuous earthwire connection4 sq.mm copper wire with painting of suitable colour

Supply and fixing of 2 nos.6A two module 5 pin socket , 2 nos. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End

supply and clamping of 4 core 6 sq.mm PVC armoured copper UG cable on wall with suitable Special MS clamps

Supply and fixing of brass cable gland for 4 x 6 sq.mm. LTUG armoured copper cable with earth connection

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply and fixing of 40A 4 pole MCB with suitable sheet steel enclosure housed in suitable weather proof SMC box with connection complete

Supply and Installation High quality imaging with 4 MP resolution Dome /Bullet Camera Water and dust resistant (IP67) and vandal resistant (IK08).Clear imaging even with strong back lighting due to 120 dB WDR.Efficient H.265+ compression technology.EXIR 2.0: advanced infrared technology with40 m long IR range.Support Human and Vehicle Detection.Heartbeat, anti-banding, mirror, password protection, password reset via email, pixel counter.IP67: IEC 60529-2013, IK08: IEC 62262:2002 (Higher end )

Supply installation Testing and Commissioning of 8 channel 1 SATA (1 no. Hard disc Network Video Recorder (Higher end)

Supply and installation of 4TB Hard Disc (Higher end)

Supply and installation of 8 port POE switch (Higher end) for CCTV IP camera

Supply and laying of unarmoured CAT6 cable in existing PVC pipe in wall

Supply and run of 19mm dia PVC rigid pipe concealed in wall/cealing for CAT6 cable (indoor)

Supply, Installation of 24 inch LED 24x7 operational display with necessar assecories for mounting on the wall (Higher End)

4way Type Cassette Unit Capacity with in built drain pump of minimum 750mm lift.Noise level at 1m distance from the Cassette unit shall be ≤ 35 to 40 dB(A). The unit shall be suitable for 220±10% volts, 1 Phase, 50Hz power supply. The unit shall be supplied with microprocessor control panel to operate with remote monitoring / control. The unit has to be compatible for any third party BMS combatible and should release open protocol like BACnet / MODBUS. Indoor machines shall have provision for fresh air connection. 2.0 TR, 695 CFM

Supply and Installation of Cordless Remote Controller

Hard Drawn Refrigerant Pipe Supply, installation and testing of Interconnecting refrigerant piping with hard drawn copper including elbows and other fittings duly insulated with 'elastomeric nitrile rubber type' tubular insulation between Refnet joint to Refnet joint & Refnet joint to outdoor units. All hard drawn piping inside the building shall be properly supported on open slotted trays and all external piping shall run in covered slotted tray.

28.6mm O.D.(Insulation -19mm thick)

22.2mm O.D.(Insulation -19mm thick)

15.9mm O.D.(Insulation -13mm thick)

12.7mm O.D.(Insulation -13mm thick)

9.53mm O.D.(Insulation -13mm thick)

Soft Drawn Refrigerant Pipe Supply, installation and testing of Interconnecting refrigerant piping with soft drawn copper duly insulated with 'elastomeric nitrile rubber type tubular insulation between Refnet joint to indoor unit. All soft drawn piping inside the building shall be properly supported on open slotted trays.

15.9mm O.D.(Insulation -13mm thick)

9.50mm O.D.(Insulation -13mm thick)

Supply & Installation of Communication Cabling

Supply, installation, testing and commissioning of 2cx1.5sqmm control cum transmission wiring & control cabling with 20mm PVC insulated, PVC sheathed, multicore copper conductor control cable in suitable PVC conduits between indoor and outdoor units.

Supply & Installation of Drain Pipe Supply and installation of 6kg/cm² rating 25mm dia pressure rating Rigid PVC for condensate drain with necessary clamps, supports, hangers and fitting such as bend, tees, reducers etc. The drain pipe should duly insulated with 9mm thick 'elastomeric nitrile rubber type' tubular insulation.XIV-PART "N"-3-M-2013

REFRIGERANT GAS Supply and charging of R-410A / R-407C refrigerant and oil for the above VRF / VRV system. (For additional charge due to piping length)

Supply & Installation of Vibrating Absorption pad

Construction of pedestal arrangement suitable for 10 HP Outdoor unit on roof at a height of 300 mm including cost of materials

Hire charges for supply, erection, maintenance and removing after completion of work for scaffolding arrangements (25sq.m)

Supply and Installation of GI Hot Dip powder coated 16 SWG cable Tray of size 300mm x 50mm

Supply and Installation of UPVC Cable management box of size 150 mm x 105 mm

Supply, installation, testing and commissioning of Micro Processor based Conventional 4 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230 / 24 volt SMPS unit, 2 Nos. of 12 volt, 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers.

Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS junction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. (Make: Apollo / Equivalent)

Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers. (Make: Ravel / Equivalent)

Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers (Make: Ravel / Equivalent)

Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers.

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Test Tube 12x100 mm

Test Tube 15x150 mm

Test Tube 18x 150 mm

Beaker 100 ml

Beaker 250 ml

Beaker 500 ml

Beaker 1 lit

Conical Flask 250 ml

Conical Flask 500 ml

Conical Flask 1 lit

Volumetric Flask 100 ml

Volumetric Flask 250 ml

Volumetric Flask 500 ml

Volumetric Flask 1 lit

Measuring Cylinder 100 ml

Measuring Cylinder 250 ml

Measuring Cylinder 500 ml

Measuring Cylinder 1 lit

Pipette Volumetric 5 ml

Pipette Volumetric 10 ml

Pipette Volumetric 20 ml

Pipette Volumetric 50 ml

Pipette Graduated 1 ml

Pipette Graduated 5 ml

Pipette Graduated 10 ml

Pipette Graduated 25 ml

Disposable Pipette 3 ml

Burette Rotaflow 10 ml

Burette Rotaflow 25 ml

Burette Rotaflow 50 ml

Burette Stand with clamp 1 set

Funnel Glass 50 mm

Funnel Glass 75 mm

Funnel Glass 100 mm

Buchner Funnel 100 mm

Buchner Funnel 150 mm

Buchner Funnel 185 mm

Filtrartion Assembly 1 unit

3 fingure clamp & boss head 1 set

Test Tube Brush 1 no

Test Tube Holder 1 no

Test Tube Stand – Plastic 1 no

Bunsunburner with stop cork 1 no

Petri Dish 50 mm

Petri Dish 100 mm

Petri Dish

Glass Rod 4”

Glass Rod 6”

Glass Rod 8”

Glass Dropper 8”

Tongs 12”

Tongs 16”

Tongs 24”

Utility Clamp 1 no

Spot Test Plate 6 dispersections 1 no

Reagent bottle with glass cap 125 ml

Reagent bottle with glass cap 250 ml

Reagent bottle with glass cap 500 ml

Reagent bottle with glass cap 1 lit

Litmus paper – Red 1 pack

Litmus paper – Blue 1 pack

Sample Containers – Urin 50 ml

Sample Containers – Urin 100 ml

Glass Dessicators 150 mm

Glass Dessicators 200 mm

Glass Dessicators 250 mm

Silica Crucible 25 ml

Silica Crucible 50 ml

Ph meter table top model -With all accessories

Potentio meter – table top model - With all accessories

Tripod Stnd 8x4

Plastic Wash bottle 250 ml

Plastic Wash bottle 500 ml

Wite gauge 1 no

Spatulla 4”

Spatulla 6”

Spatulla 8”

Round bottom Flask 250 ml

Round bottom Flask 500 ml

Round bottom Flask 1 lit

Coil Condencer 300 mm

Filter Paper - 125 mm/pack of 100 nos

Separating Funnel 100 ml

Separating Funnel 250 ml

Separating Funnel 500 ml

Filter Flask heavy wall 250 ml

Filter Flask heavy wall 500 ml

Filter Flask heavy wall 1000 ml

Watch Glass 75 mm

Watch Glass 100 mm

Watch Glass 150 mm

Fushion Tube 1 pack

Digital Balance - Accuraccu: 0/001gm-200 gms. High accuracy

Safety Goggles 1 no

Chemical Goggles 1 no

Fumigation Chamber

Weather Sensors Arevital For Climate Monitoring

Whirling Hygrometer

Scientific Microscopy Analysis (SEM)

Portable Microscope

X-Ray Fluorescence Spectroscopy

Laser Induced Breakdown Spectroscopy

PALM LEAF XEROX MACHINE,PALM LEAF READING MACHINE

5 D Camera with lens and Tripad

Sub total

Sathyanarayana Electricals (BID ID -1271868)