REPAIR TO PCC HARD STANDING CHEQUERED TILES INTERLOCKING TILES BOUNDARY WALL AND PVC WALL PANELING UNDER AGE BR II OF GE (W) AGRA

Amount

Taking down of old precast interlocking paver block, any size and shape, any description and in any position and removing the rubbish out side the MD land complete all as specified and directed.

M&L PCC 25 mm thick (1:2:4) type B-0 using 12.5 mm graded aggregate as in leveling and maintaning slope complete all as specified and directed.

M&L for 80 mm thick precast PCC interlocking coloured paver rubber moulded block, factory made, of grade M 40 single layer monolithic high density, manufactured by electro vibro hydraulically operated block making machine conforming to IS -15658- 2006 laid and jointed over sand cushion layer complete all as specified and directed. Note : Sand cushion shall be measured & paid separately

M&L for 25 mm thick sand cushion layer for laying interlocking pavers complete all as specified and directed.

M&L in repair machine pressed coloured rubber moulded chequered tiles 25 cm x 25 cm x 25 mm thick, set, jointed & pointed in neat cement slurry in floors over 20 mm thick screed bed in CM 1:6.complete all as specified and directed..

Demolition of cement concrete (unreinforced) in ground floors and pavings n exe 15 cm thickness (below or above ground level) and removing rubbish out side MD land complete all as specified and directed..

M&L PCC 40 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate as in flooring,finished surface even& smooth with using extra cement complete all as specified and directed..

Dismantling wall Panelling and ceiling board or insulation board /slabs/blanket any thickness including cover fillets.complete all as specified and directed..

S& F in repair PVC solid sheet wall panelling of thicknes 5 mm of Rajshree or as approved by GE, stuck on inner frame work on 50 mm wide strip and 5 mm thick PVC sheet, the strip should have a groove of 6 mm wide and 1 mm depth in their centre of sinking the head of screw to the wall verically the PVC strip shall be fixed to the wall using 65 mm long MS screw not more than 200 mm c/c through the groove in the strip by using PVC fasteners complete all as specified and directed

Demolition of brickwork built in cement mortar including all quoins arches pillar etc including debris shall be removed outside MD land complete all as specified and directed.

M&L brick work with sub class 'B' bricks fly ash old size straight or curved on plan exc 6m mean radius, built in cm 1:4 complete all as specified and directed.

M & L cement concrete type B-1 1:2:4 mix (20mm graded stone aggregate) as in lintle up to 1.50 m span, coping etc including necessary use & waste of formwork complete all as specified and directed.

M&L rendering 15mm thick with CM 1:4 on fair faces of brick work finishing fair and even without using extra cement complete all as specified and directed.

M&L rendering 15mm thick with CM 1:4 on other than fair faces of brick work, finishing fair and even without using extra cement complete all as specified and directed..

M&L preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer with alkali resistant primer complete all as specified and directed.

M & L for preparation of plastered surfaces of wall and applying two coats of exterior emulsion (Apex ) over a coat of primer complete all as specified and directed.

Dismantling mild steel work of any description complete all as specified and directed.

S&F joist channel, MS pipe, angle,flat, or tee section as in post and strut in fencing including drilling holes, knotching for wire etc, flat iron fillet (for securing wire mesh/chanelling fencing) incl all necessary drilling riveting ,bolts etc. similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M & L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of redoxide primer complete all as specified and directed.

M & L in repair galvanised, 2 strand, 2.24 mm dia, steel barbed wire, barbed with 2mm dia barbs at 75mm (approx) spacing and straining and fixing to any type of post straining bolts, including securring or tying at crossing with and including galvanised mild steel wire complete all as specified and directed..

M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding of hold fast etc complete all as specified and directed

Demolition of kota stone, granite flooring including cement mortar bedding (but not backing) complete all as specified and directed.

M & L for Machine cut & polished smooth surface of kota stone slab 18-20mm thick as in vertical surfaces, including 15 mm thick cement mortar backing coat 1:4 etc complete all as specified and directed.

M & L for Machine cut & polished smooth surface of kota stone slab 20-25mm thick as in flooring, including 20 mm thick cement mortar screed bed 1:6 etc complete all as specified and directed.

M&L for 18-20 MM thick marble strip 50mm wide laid over 15mm thick screed bed in cm 1:6, laid and jointed with grey cement slurry mixed with pigment to match with stone shade including cutting, grinding, rubbing and mirror polishing complete all as specified and directed.

M&L for 18-20mm thick granite stone work (table rubbed and polished) in pillars, jambs, window cills, cooking platform, steps over and including 15mm thick screed bed in CM 1:4, and pointing in white cement(1:2) using marble dust with admixure of pigment to match with shade of granite complete all as specified and drected

C P Singh and Co

M/s Arora Construction

Asha Construction

Messars Maa Devi Construction Co.

M/s Salim Mohomad

M/s M S Sharma and Co.

M/s K S Builders

N.K. ENTERPRISES

SAROJ CONSTRUCTIONS