PROVISION OF ROOM FOR GAS GODOWN AT AF STN DINJAN UNDER GE (AF) MOHANBARI

Amount

Surface dressing not exceeding 15 cm deep in soft/loose soil complete all as specified and directed.

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc, not exc 10 sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

All as per item No 2 here in before but exc 1.50m depth complete all as specified and directed.

M & L for hardcore of broken stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface complete all as specified and directed.

M & L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M & L for formwork to sides of concrete foundation, footing ,bases of column and plinth beam and similar work etc complete all as specified and directed.

M & L for mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 8mm dia as in stirrups spacer and binder , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L RCC M-25 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete 1:2:4, type B-0, 40mm thick complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

M&L for spreading and levelling of soil in layers not exceeding 25 cm thick including watering, well ramming as required complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

M & L for formwork to sides of columns, square, rectangular etc, complete all as specified and directed.

M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports overhangs etc, also splays between floors and beams, etc., work in rough finished flat surfaces of concrete complete all as specified and directed.

M&L for form work to sides and soffits of suspended slabs such as roof slabs, floor slabs and similar work N exc 200 mm thick (horizontal or sloping) complete all as specified and directed.

M & L for formwork to chajjas including edges etc complete all as specified and directed.

M&L RCC M-25 (using 20mm graded stone aggregate) as in columns, etc complete all as specified and directed.

M&L RCC M-25 (using 20mm graded stone aggregate) as in lintel beam, roof beam etc complete all as specified and directed.

M&L RCC M-25 (using 20mm graded stone aggregate) as in chajjas etc complete all as specified and directed.

M&L for RCC type M-25 (using 20 mm graded stone aggregate) as in roof slab supported on walls, beams and columns in roofs etc complete all as specified and directed.

S&F steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows for industrial buildings, fixed type, with glazing bars complete all as specified and directed.

M & L rendering 10mm thick,on fair faces of brick work or stone masonry surfaces or concrete surfaces on wall in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified and directed.

M & L rendering 20 mm thick in two layers (15+5) ,on fair faces of stone masonry surfaces or concrete surfaces in cement mortar 1:6 finished even & smooth without using extra cement including use of water proofing compound in outer layer complete all as specified and directed. Note- Water proofing compound use against this item shall be measured and paid seperately.

Supply only liquid water proofing compound (ISI marked) complete all as specified and directed.

M & L rendering 5mm thick,on fair faces of concrete surfaces in cement mortar 1:3 on ceiling ,finished even & smooth without using extra cement including using 2 mm thick Birla wall care putty to obtain even and smooth surface complete all as specified and directed.

M& L for antitermite treatment to back fill in contact with masonry @ 7.5 litre/Sqm complete all as specified and directed.

Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

M&L for treating the top surface of filled earth with anti termite emulsion at the rate of 5 litres per square metre of surface area complete all as specified and directed.

M&L for treating the soil under plinth protection with anti termite emulsion at the rate of 5 litres per square metre of surface area complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L preperation of newly plastered external wall surfaces and applying two coats of acrylic emulsion weather proof antifungal paint over a coat of Apex primer complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection and finished the surface even & smooth without using extra cement complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for mastic flooring as per IS 1195-1196 on concrete surfaces of RCC including hacking and cleaning the surfaces and laying Mastic flooring in Grade IV with thickness 25 mm. The quality of bitumen is as per IS 702, coarse aggregate, fine aggregate & lime stone powder shall conforming to IS 1195-96. The proportion of mixing of bitumen,lime stone powder, coarse & fine aggregate conforming to IS 1195-96 including providing all necessary equipement complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparation of newly steel surfaces and applying two coats of synthetic enamel paint over a one coat of red oxide primer complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floor finished, finished even and broom finish as ramp etc complete all as specified and directed.

M&L for coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles on vertical surfaces of size 600mm x 300 mm x 7mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F soap dish chromium plated fancy type including fixing with brass screw complete all as specified and directed.

S&F bib tap 15 mm bore cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F15 mm bore Stop valve/angle valve chromium plated cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F Vitreous China wash hand basin, white, flat back, size 550x400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F Vitreous China Urinals, half stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinals against wall in cement mortar 1:2, securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, CP waste coupling, waste pipe, automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F Pillar tap 15 mm bore fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F Waste coupling of PTMT for 32 mm bore dia of discharge pipe (half or full threaded) Minimum weight 45gms complete all as specified and directed.

S&F 32 mm bore brass chromium plates bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.

S&F PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply, pipe line and jointing to WC complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed.

S&F Rotational moulded polytheline water storage tank trple layered 500 Ltrs capacity (cylinderical / vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S & F 16 mm outer dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings, fixed to walls, ceilings or in floors etc complete all as specified and directed.

All as per Item No. 56 here in before but 20mm outer dia pipes complete all as specified and directed.

S&F 20mm dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends of any radius for 110mm bore PVC pipe complete all as specified and directed.

S&F PVC (SWR) bends of any radius for 75 mm bore pipe complete all as specified and directed.

S&F MS clamps for PVC (SWR) pipes 75mm bore made out of 50mm x 5 mm flat and 16 mm dia round bars, including bolts and nuts and securing to wall in PCC 1:2:4 and making good in cement mortar 1:3 complete all as specified and directed.

S&F PVC (SWR) gully trap 110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F 75 mm outer dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110mm PVC (SWR) `S' trap complete all as specified and directed.

S&F 75 mm PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 100 mm PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 75 mm PVC (SWR) couplers complete all as specified and directed.

S&F 100 mm PVC (SWR) reducers complete all as specified and directed.

PVC 75 mm (SWR) vent cowl complete all as specified and directed.

PVC 100 mm (SWR) vent cowl complete all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 50x47 mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded Prelam PVC Sheet on the front face and 2 mm prelam PVC Sheet on back face fiixing in frame at site as per specification and drawing complete all as specified and directed.

S&F pressed steel frames of size 105 x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc complete all as specified and directed.

S&F 30 mm thick, 2nd class hardwood, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F powder coated aluminium ventilator fixed type half glazed and half gauged with and including hardware fittings, glazing, wire gauge, rubber packing, aluminium beading etc. as specified below including taking down old window/ventilator and making good of wall surface to match with existing surface complete all as specified and directed : - Frame : 44.5 x 44.5 mm x 1.80 mm thick Middle rail : 44.5 x 44.5 mm x 1.80 mm thick Glazing : 5 mm thick frosted glass fixed with rubber gasket and aluminium beading. Wire gauge : stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with aluminium beading.

M&L for preparation of new wood or wood based surfaces not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F MS butt hinges 100 mm long complete all as specified and directed.

S&F aluminium, anodised barrel tower bolts 150 mm long, of extruded section and fixed complete all as specified and directed.

S&F aluminium handles cast type anodised of size 150 mm long complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Excavation over areas nexc 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material to a distance exceeding 250 M but not exc 500 M and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Rolling and consolidating formation surface of roads berms in cutting to the required level gradient and camber with 8 to 12 tonne power roller including filling in depression which occurs during the process with approved earth complete all as specified and directed.

Soling (or sub base) of 150 mm spread thickness with broken boulders or quarried stone of grading 80 to 40 mm including interstices filled surface formed and rolled with 8 to 12 tonne power roller and consolidated to required gradient & camber complete all as specified and directed.

M&L for providing and laying 250 mm thick GSB Grade- I of table 400-1 of MORTH specification/ IRC Specification, spreading in layers n. exc 15 cm thick, watering, ramming/rolling by tandem vibratory roller and finishing to longitudinal gradient (1:150) & transverse gradient (1:100) for achieve field compaction at least to 98% of MDD(Maximum Dry Density) of soil complete all as specified and directed.

Material and Labour for construction of 100mm thick cement concrete as Dry Lean Concrete Base Course for compressive strength not less than 10 Mpa at 7 days for each consecutive group of 5 cubes of individual strength of cube shall not less than 7.5 Mpa at 7 days using aggregate not exceeding 26.5mm, with minimum cement content shall not be less than 150 Kg/Cum including spreading and compacted by using mechanical paver and vibratory roller to thickness of 150mm including necessary form work finishing etc complete all as specified and as per TI/MORTH specification 601 complete all as specified and directed.

Material and labour for sand cushioning (10mm thick), with clean river sand spread evenly, levelled to uniform thickness, rammed including watering, laid over DLC complete all as specified and directed.

Supply and Laying 400 Micron thick transparent HDPE Polythene film of GRADE-I conforming to IS-10889 (minimum weight 390 gm/Sqm) over sand cushioning, as anti-friction layer on the base course of road work as per specification with specified overlap between adjacent strip and transverse joint etc complete all as specified and directed. Note : Side lap shall be 150mm and end lap shall be 300mm. The rate shall be deemed to included for the over laps.

M & L for cement concrete as in pavement/ hard standing / concrete road of flexural strength 40 kg/sqcm in field using 400 kg of cement per cubic metre, thickness of concrete 20 cm etc complete all as specified and directed.

M&L for forming contraction (Dummy) joints 50mm deepx10 mm wide filled with sealing compound Grade B complete all as specfied and directed.

M&L for forming construction joints 60mm deepx10mm wide filled wiith sealing compound Grade B complete all as specified and directed.

M&L Plain Cement Concrete 1:4:8 type D-2, (using 40 mm graded granite stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M & L brick work in old size with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M & L for Plain Cement Concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) in benching for manholes etc. including necessary form work complete all as specified and directed.

M & L rendering 15 mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:4 and finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for reinforced concrete pipes 150mm dia, class NP3, laid in trenches and jointed with collars complete complete all as specified and directed.

M&L for Plain Concrete Cement 1:3:6 type C-2 (using 40 mm graded stone aggregate) in drain including packing under and haunching against the sides of the pipes after they are laid and tested for 150mm internal dia of pipe complete all as specified and directed.

Cutting into existing manholes of internal dia of pipe 150mm for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

M & L rendering 15 mm thick on other than fair faces of brick work or concrete surfaces of walls in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for precast reinforced cement concrete 1:2:4 type B-1 as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:6 complete all as specified and directed.

Excavation in post holes each n exc 0.5 Cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm and removing surplus soil to a distance n exc 50m and making good in soft/loose soil complete all as specified and directed.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, matching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or reveting etc an simillar work ,complete all as specified and as directed.

Supply only MS galvanised chain link fencing, any size or type.

Fixing only MS galvanised chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts etc including provision of binding wire complete all as specified and directed.

S&F MS bolts, screw (machine made) with hexagonal or square heads at one end and screwed the other, or screwed bolts ends, each screwed end to be fitted with washer and one hexagonal or square nut n exc 5 cm longmeter 5 cm long complete all as specified and directed.

S&F Galvanised, 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spactings and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc as directed. (Note: Each line wire to be measured)

M&L for RCC M-25 (using 20mm graded stone) agg as in foundation incl rafts, footing, foundation beams, plinth beam, bases of column etc. basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-25 (using 20mm graded stone agg) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, water troughs and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed.

Form work to sides of concrete foundation, footing, bases of colums, raft and raft beams, slides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter rough finished surface of complete.

M&L for framed work as in steel gate framed and side hung incl pintle hinges, stops hand made sliding bolt monkey tail bolts etc complete all as specified and directed.

M&L for 20mm thick granite (any type) work (table rubbed and polished) slab for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L Sand filling under floors including watering and consolidation complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and directed.

Supply and fixed Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement based paint, white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc, of drops and splashes complete all as specified .

M & L for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for point wiring with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor (FRLS) 1100 Volts grade cable (red colour cable to be used for Phase connection and black colour cable to be used for neutral connection) including PVC concealed conduit with all accessories including 1.5 sqmm copper multistrand conductor FRLS 1100 Volts grade unsheathed PVC insulated (green colour) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch, socket and fan regulator with 3 mm thick hylum laminated sheet cover incl cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete for the following complete all as specified and as directed. (Note : Cutting and chasing deemed to be included in coated rate. )

Light/Fan/Exhaust fan/Bell point

5 amp socket on same boared

5 Amp switch socket on Independent Board.

S&F of socket only 3 pin, 5 Amps flush type 230/240 V complete all as specified and directed.

S&F of switch socket combination 2 in 1, 5/6 Amps flush type230/240 V complete all as specified and directed.

S&F of ceiling rose 3 phase/PVC/polycarbonate,isolated body,surface type with ISI marked complete all as specified and directed.

S&F of switch piano flush type 5/6 amps , 240 volt single pole one way complete all as specified and directed.

S&F in repair of ultra slim LED batten 10 Watt, 230Volts, 50 Hz, decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly including lamp, connection wire complete all as specified and directed.

Supply and fix in replacement of exhaust fan, steel body AC single Phase. 230V of size 300m sweep 1400RPM, and min air delivery 1850 Cum/h with, blades, frame and louvers complete all as specified and directed.

Supply and fixing in repair of factory made sheet metal enclosure for DBs double door, SPN, 240 volt, 4 Way, IP-42 protection with bus bar, neutral link, earth link complete all as specified and directed.

Supply and fixing in repair of 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 10 to 32 Amp current carrying capacity with connection testing complete all as specified and directed.

Supply and fixing in repair of 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32-40 Amp current carrying capacity with connection testing complete all as specified and directed.

Supply and laying 3 layer (inner antimicrobial, outer UV stabilized) ISI marked, IS-15801, PP-R pipes SDR 11 (PN-10) and PP-R plain fittings in trenches/walls/ceilings or laying in floors of size outer dia 32 mm including all fittings complete all as specified and directed.

Supply and laying 3 layer (inner antimicrobial, outer UV stabilized) ISI marked, IS-15801, PP-R pipes SDR 11 (PN-10) and PP-R plain fittings in trenches/walls/cellings or laying in floors of size outer dia 25 mm including all fittings complete all as specified and directed.

Supply and fix PPR Gate Valves (Brass Insert) of 32 mm bore of outer dia including all fittings complete all as specified and directed.

Supply and fix PPR Gate Valves (Brass Insert) of 25 mm bore of outer dia including all fittings complete all as specified and directed.

Cutting or screwing existing steel tubing for alteration or additions suitable size for 50 mm dia complete all as specified and directed.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 50 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

Supply, laying, jointing and testing cable XLPE Insulated,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete all as specified and directed.

Supply and fixing of LED building security light/street light 35 W, 230 volts, 50 Hz, new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having driver compartment with IP66 protection suitable for mounting on pole/ building including 32mm dia GI bracket of suitable length etc complete all as specified and directed.

M&L for sand cushioning to under ground cable provided with a layer of sand 8 cm depth before laying of cable and 15 cm depth after laying and stretching the cable complete all as specified and directed. Note: Punned thickness of sand shall be measured & paid.

M&L for well burnt sub class 'B' bricks of nominal size 230X115X75 mm abutting each other for mechanical protection of cable with width equal to lenght of brick including taking out old complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate 600mm x 600mm x6mm thick elecrode and 4mm galvanised iron/GI wire as earthing lead burried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides connected to GI wire of 4mm dia earth lead by means of bolts, nuts, check nuts and washers (including welding) of galvanised iron or steel and connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC 1:2:4 type B1 cover slab 54cm x 54cm x 5cm reinforce with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 40mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I complete all as specified and directed.

Supply, installation, testing & commissioning of addressable main control panel of fire alarm system, single loop microprocessor based intelligent panel with EN54 of capacity from 99 detectors & 99 modules upto 250 device having inbuilt fire relay, fault relay, power supply unit with and including suitable battery of capacity 24Volt 07Ah alongwith all connected accessories complete all as specified and directed.

Supply and fixing of combined scattered light smoke and temperature detector (Multi Sensor) programmed to detect either smoke or heat, or both depending on the type of system having sensitivity complete all as specified and directed.

Supply and fixing of electronically addressable intelligent resettable type Manual Call Point with mounting base complying with EN54 standard and LPCB approved with the specification as appended below complete all as specified and directed.:- a) Power- 24V, ≤ 0.6 mA (Standby Current) ≤1.8mA (Alarm Current) b) Class A c) Initiating Mode- Pressing the action plate manually and Resuming Mode- Manually Resumed by a special key. d) Ingress Protection IP-24 Make- Automation fire alarm system.

Supply and fixing of fire alarm sounder/ sirens electronic type horizontal single stage continous normal operation for atleast 50 minutes with sound level 65 db to 120 db measured at 1.5 m with sound output variation of + 5db, 500m range of fire alarm system complete all as specified and directed.

S&F Intelligent Addressable Control module with IP66 casing having 2 addressable input and one output complete all as specified and directed.

Supply and Laying of black colored copper 2 core 1.5 sqmm Fexible electrical wire PVC insulated and round sheathed wire voltage grade up to 1100 V, including GI MS pipe of 20mm dia including all accessries complete all as specified and directed.

Supply and fix in replacement of UPS for 30 min back up single phase AC input 160 to 260 V and out put 230 ± 1% of capacity 1KVA including fixing arrangement on wall complete all as specified and directed.

ms singh construction

Chief Builders &Consultants

M/s Singh enterprises

M/s Dhruv Enterprises

M/s Dhani Enterprise

S K ENTERPRISE