GE (AF)/SGR-08/2025-26 WELCOME MAINTENANCE TO OMQs UNDER GE (AF) SRINAGAR

Amount

Preparation of old decorated plastered or unplastered surfaces of wall including filling of holes, cracks and undulating surface with cement wall care putty making surface even and smooth and applying one coat of distemper oil emulsion paint (OBD), complete all as specified and directed

Preparation of old decorated plastered or unplastered surfaces of wall including filling of holes, cracks and undulating surface with cement wall care putty making surface even and smooth and applying two coats of distemper oil emulsion paint (OBD), complete all as specified and directed

Complete removal of existing treatment from wall surfaces and applying two coats of oil bound distemper of approved colour including applying 1mm thick JK Birla wall care putty for making the surface even and smooth and filling the uneven and small holes and making the edges of plaster properly by plaster of paris preparatory to distempering including preparation of surface by washing rubbing down and stopping of distempered surfaces, complete all as specified and directed.

Preparation of old plastered / unplastered old decorated surfaces of ceiling / False ceiling, cornices by brooming down or steel brushing, scraping down smoke. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of oil bound distemper (OBD), complete all as specified and directed

Preparation of old plastered or unplastered ceiling surfaces and applying one coat of white wash, complete all as specified and directed.

Preparation of old plastered or unplastered wall surfaces and applying one coat of white wash, complete all as specified and directed.

Preparation of old plastered or unplastered wall surfaces and applying two coats of white wash, complete all as specified and directed.

Preparation of old painted steel & iron surfaces of any description over 10cm width or girth and applying One coat synthetic enamel paint, complete all as specified and directed.

Preparation of old painted wood surfaces and wood based materials of any description over 10cm width or girth and applying one coat synthetic enamel paint, complete all as specified and directed.

Preparation of old plastered surfaces of wall by washing down, brooming down or steel wire brushing etc. and applying one coat cement base paint, complete all as specified and directed.

Complete removal of existing treatment from brick walls or concrete plastered or unplastered surfaces including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc. including cornices, pilasters etc. and applying two coats of cement based paint over a coat of primer, complete all as specified and directed.

Complete removal of existing treatment from brick walls or concrete plastered or unplastered surfaces including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc. including cornices, pilasters etc. and applying two coats of weather paint (Apex) over a coat of exterior primer, complete all as specified and directed.

Complete removal of existing treatment from brick walls or concrete plastered or unplastered surfaces including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc. including cornices, pilasters etc. and applying one coat of weather paint (Apex), complete all as specified and directed.

M&L for French polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new wooden works with two or more coats, complete all as specified and directed.

S&F in repairs 32/40 mm dia bore PVC flexible pipe for wash hand basin / urinal, complete all as specified and directed.

S&F in repairs 15mm size PVC connections with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in repairs CP Health faucet fixed with spring action and lever along with flexible shower hose with brass nut of length 1.5m fitted in the existing water connection in the toilets, complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail 20mm dia "D" type 60cm long between flanges, complete all as specified and directed.

S&F in repairs plastic water closet seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device, complete all as specified and directed.

S&F in repairs 15mm bore bib tap, cast copper alloy, chromium plated, with capstan handle, screwed down, screwed from iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repairs 15mm bore Stop valve / angle valve, cast copper alloy, chromium plated, fancy type, screwed down high pressure with capstan head, complete all as specified and directed.

S&F in repairs 15mm bore hot and cold water mixer with swan neck for WHB chromium plated quarter turn screwed down, including necessary fittings, complete all as specified and directed.

S&F in repairs 15mm bore hot and cold water mixer with swan neck for WHB chromium plated quarter turn screwed down, including necessary fittings, complete all as specified and directed.

S&F in repairs 15mm size sink mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc., complete all as specified and directed.

S&F in repairs 5.5mm thick sheet glass shelf assembly consisting sheet glass, chromium plated, 600mm long and 120mm wide with chromium plated brackets, guard bar and railing, complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white flat back, size of 550x400mm including cutting for and pinning in ends of brackets (including supply and fixing of brackets) or erecting stand, 32mm brass chromium plated waste fitting with long screwed shank and fly nut flangedend bedded in red led cement, chain and plug and porcelain stopper, complete all as specified and directed.

S&F in repairs for 15mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.

S&F in repairs for 20mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling existing water tank and removing from site, complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc of capacity upto 500 litres and refixing the float valve and plugging wash pipe, complete all as specified and directed.

Cleaning and removing all scales and dirt etc. from tanks and from mouths of circulating pipes of capacity exc 500 litres but n exc 1000 litres and refixing the float valve and plugging wash pipe, complete all as specified and directed.

S&F in repairs cabinet mirror of size 450x600mm, complete all as specified and directed.

Taking down and refixing of shutters in same opening after easing and adjusting of any description exc 1 Sqm and n exc 2 Sqm each including resecuring/changing of builders hardware, complete all as specified and directed.

Taking down aluminium door / window shutter of any size n exc 2.5 Sqm each and refixing in the same position / opening after easing and adjusting, tightening of joints or changes of hinges, screws, cleats, beadings, rubber gasket etc, as per site requirement to make functional the shutter, complete all as specified and directed.

Taking down shutters of any description size of shutter exc 1 Sqm but n.exc 2 Sqm and removing from site complete all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 Sqm and credited to the contractor, complete all as specified and directed Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n exc 4.0 Sqm and credited to the contractor, complete all as specified and directed Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface.

S&F pressed steel frame for doors with one rebates size of frame 125x60 mm including necessary fixing lungs hinges lock strike plate etc. including PCC, 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in back filling of pressed steel frame, complete all as specified and directed.

S&F pressed steel frame for doors with one rebates size of frame 105x60 mm including necessary fixing lungs hinges lock strike plate etc. including PCC, 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in back filling of pressed steel frame, complete all as specified and directed.

S&F anodised aluminium powder coated door shutter with frame (minimum thickness of powder coating 50 micron of approved colour), partly glazed with 5mm thick tinted glass and partly panelled with 9mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150mm size, aluminium barrel tower bolt 200mm size, mortice lock etc. all as specified below, complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4mm (Section No 14021) (b) Vertical members of shutter section shall be be of size 85.00 x 44.45 x 2.00mm (Section No 19560) (c) Top members of shutter section shall be be of size 83.50 x 44.45 x 2.00mm (Section No 19581) (d) Lock rail (middle member) of shutter section shall be be of size 150.00 x 44.45 x 3.00mm (Section No 19596) (e) Bottom members of shutter section shall be be of size 150.00 x 44.45 x 3.10mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80mm thick (Section No 19370). Note:- (i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx A (ii) Floor door spring will be measured & paid separately.

S&F aluminium window and ventilator shutters powder coated of any colour (Thickness or powder coating not less than 50 micron), side hung type without sash bars/ Sliding windows, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified and directed.

S&F 4.8mm thick sheet glass ordinary quality and glazing with aluminium glazing clips and rubber neosprine gasket in square or rectangular in section n exc 0.5 Sqm in each pane, complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening, complete all as specified and directed.

S&F 30mm thick factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face, suppling and fining in frame at site as per specification and drawing

S&F 35mm thick 2nd class hardwood, factory made, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), complete all as specified and directed.

S&F35mm thick 2nd class hardwood plain framed, panelled shutter (two panel), factory made, with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F in repairs 250mm mild steel helical door spring rat tail type including collar plate and welding if required or otherwise fixed with screw on wooden frames, complete all as specified and directed.

S&F 150mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 100mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 150mm size Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 100mm size Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 100mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed..

S&F 100mm long floor door stopper of aluminium alloy body and tongue with rubber cover ends, complete all as specified and directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts, complete all as specified and directed.

S&F mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 in steel / wooden shutter of door & windows, complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty / wooden beading in squares not exceeding 0.50 Sqm, complete all as specified and directed.

S&F door strip comprising of aluminium holds & rubber strip fixed at bottom of door shutter with screws, complete all as specified and directed.

S&F in repairs 18-19mm thick block board, grade-2 quality, interior grade, commercial type, fixed with screws to timber framework as in kitchen drawers, cupboard shutters etc. complete all as specified and directed.

S&F 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed.

S&F 30mm width of flaps continuous (piano) hinges, stainless steel, bright finish or electro galvanised, complete all as specified and directed.

S&F in repairs 100mm long hasp and staple, safety type, brass aluminium anodized with mild steel hinge pin including bolt to hinge plote and fixed with screw, complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and directed.

S&F in repairs Kitchen plate rack made of stainless steel 1mm thick with plugs washers as overall size of 75cm x 75cm including fixing to wall and all accessories, complete all as specified and directed.

S&F in repairs 9mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work or wall panelling / flooring / ceiling, complete all as specified and directed.

S&F GI frame work of size 605 x 605mm for seamless ceiling comprising of Gl perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 45 mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including supply and fixing 12mm thick Gypsum Board (water proof) fixed with screw or as per manufacturers instructions and jointing and finishing to a flush finish of tapered and square edges other board any other joints with recommended jointing compound over jointing tapes, finishing with one coat of primer and two coats of oil emulsion distemper over a coat 2mm thick wall care putty including taking down existing ceiling, complete all as specified and directed.

S&F in repairs snap grid for false ceiling of size 600mm x 600mm grid EXPOSED GRID SYSTEM fabricated with galvanised iron powder coated section all as shown on serial page No 185 of SSR part II (2020 print), complete all as specified and directed.

S&F 12mm thick perforated particle boards or tiles for insulation and acoustic purposes, 60cm x 60cm in size, fixed with nails to timber frame workorwith staples on snap grid, complete all as specified and directed.

S&F in repairs 6mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber /GI / aluminium framework with screws to ceiling flat or sloping, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290 Gde-E-165, complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating, complete all as specified and directed.

All as per Ser item No 73.00 here in before but except Sheets.

S&F 0.63mm thick Galvanised, Plain mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Preparing new zinc (or galvanised) surfaces to receive painting of any description over 10cm width or girth, by coating with mordant solution including washing and cleaning, etc. steel and iron surfaces and applying two coats of synthetic enamel paint over one coat red oxide primer, complete all as specified and directed.

M&L for tightening bolts and closing bolt holes, etc. to rectify the leakage / seepage, in old roof of corrugated steel sheets by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts if required, all set in stiff white lead, complete all as specified and directed.

Preparation of old zinc (or galvanised) steel and iron roof surfaces of any description over 10 cm width or girth to receive painting, by coating with mordant solution including washing and cleaning etc. and applying two coats of synthetic enamel paint, complete all as specified and directed.

Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed.

Preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc., complete all as specified and directed.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for, complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surface, not exceeding 200m thick (Horizontal or sloping), complete all as specified and directed.

M&L for Reinforced cement concrete, 1:2:4, Type B-1 (using 20 mm graded crushed stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for MS TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F in repairs 20mm dia decorative powder coated drapery curtain rods of with bright finish, including decorative side domes, brackets and a minimum of 8 Nos curtain rings in per running metre of length, complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

M&L for brick work with sub-class `B' bricks (using old size bricks), straight or curved on plan exceeding 6m mean radius built in CM 1:6, Complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 and finishing even and smooth without using extra cement using integral water proofing compound, complete all as specified and directed. (WPC shall be measured and paid separately).

Supply only integral water proofing compound, complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and as directed.

Preparation of new surface of wall and applying two coats of cement base paint over one coat of primer, complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer, complete all as specified and directed.

M&L for Lagging to 15mm bore pipes used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm complete, complete all as specified and directed.

M&L for Lagging to 20mm bore pipes used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm complete, complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) soil waste and vent pipes single socketed in any length with rubber ring joints, laid in trenches or fixed to walls, complete all as specified and directed

S&F in repairs 110mm dia PVC (SWR) soil waste and vent pipes single socketed in any length with rubber ring joints, laid in trenches or fixed to walls, complete all as specified and directed

M&L for cleaning surface of sunken portion wall / bottom and applying cement slurry @1.2 Kg per Sqm and applying 15mm thick cement plastred in CM 1:3 finished even and fair using extra cement and applying two coats of acrylic polymer modified cementious slurry as per manufactureas instruction to make the surface leak proof, complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15cm thick (below or above ground level), complete all as specified and directed.

M&L for 25mm thick plain cement concrete, 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in sub base of floor finish even and rough to receive further floor finishes (tile/kota stone/ marble ), complete all as specified and directed.

M&L for 100mm thick plain cement concrete, 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in flooring , laid in alternate bays and finishing the surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for Glazed ceramic tile 300 x 600 x 06 -7mm thick (coloured) on vertical surfaces such as wall, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat CM 1:4, complete all as specified and directed.

M&L for strong silicone sealant suitable for roof leak hole, metal leak, gap filling etc. hole size n exc 5x5mm including necessary fitting and scaffolding height upto 15m, complete all as specified and directed.

Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismantling / taking down items) worth Rs 68,890.00 during AOC. (Note :- Tenderers shall not quote for this Schedule)

M/S GHULAM MOHAMMAD AND CO. (BID ID -3338755)

M/S ZAHOOR ENTERPRISES (BID ID -3340885)

SB ENTERPRISES (BID ID -3340703)

M/S FAROOQ AND SONS (BID ID -3340203)

M/S WANI AND SONS (BID ID -3338944)

M/s PARVAZ CONSTRUCTION COMPANY (BID ID -3337903)

M/S TARIQ AHMAD SHEIKH (BID ID -3341721)

M/S SA INFRATECH (BID ID -3341662)

M/S GULAM AHMAD ABDUL SAMAD (BID ID -3340069)

M/S GULZAR ENTERPRISES (BID ID -3341305)