NOTICE E TENDER FOR REPAIR RENOVATION WORK B5 BLK AT SAF GAMES VILLAGE RESDTL QRTS KOYAMBEDU CHENNAI

Amount

Demolishing Cement concrete work in floors stacking material within 50 metres lead.CC 1:3:6

Dismantling Brick Work and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

Dismantling old plaster or skirting including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling Ventilators, (steel or wood) shutter including chowkhats, architrave, holdfasts etc. Of area 3 sq. metres and below.

Cement concrete flooring (Mix 1:2:4) 40 mm thick with 20 mm nominal size stone aggregate

Providing and laying car parking Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make (Oasis/Somany/RAK/Kajaria), in all colours & shade etc. Size of Tile 400 X 400mm / 600 X 600mm

Cement concrete (Mix 1:3:6) with 20 mm size stone aggregate

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse Msand, filling the joints with line sand etc.

Half brick masonry with common burnt clay bricks in superstructure above plinth level up to floor V level. Cement mortar 1:3

15 mm cement plaster on rough side of single or half brick wall of mix: (1:4)

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .

Providing and fixing factory made uPVC white colour casement/ casement cum fixed glazed windows/Ventilators comprising of uPVC multi- chambered frame, sash and mullion (where ever required) G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. for fixing hardware's and drainage of water and fixing single glazed glass in UPVC door, window shutters and partitions etc. with EPDM rubber With float glass panes of 4.0 mm thickness.

Filling the gap in between UPVC frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant. Upto 5mm depth and 5 mm width.

Removing white or colour wash by scrapping.

Hacking on the Wall by Dry cut machine on the wall after removing the paint

Providing and fixing Ist quality ceramic/vetrified glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make (Oasis/Somany/RAK/Kajaria), in all colours, shades except burgundy, bottle green, black of Size 300mm X 450mm.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make (Oasis/Somany/RAK/Kajaria), in all colours & shade. Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make (Oasis/Somany/RAK/Kajaria), in all colours & shade. Size of Tile 600x600 mm

Brick work with common burnt clay machine moulded in superstructure above plinth level up to floor five level in cement mortar 1:6.

Applying one coat of water thinnable cement primer (Asian/Nippon) on wall surface :

Providing and applying white cement based putty (Brila/Jk), over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint (Asian/Nippon) Two or more coats

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC SWR pipes (Ashirvad/Supreme/Prince) conforming to IS : 13592 Type A, including Moulded fittings/ accessories jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC SWR pipes (Ashirvad/Supreme/Prince) conforming to IS : 13592 Type A, including Moulded fittings/ accessories jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 75 mm diameter

Earth excavation in surface area

Providing and laying in position cement concrete 1:4:8 of stone aggregate 40 mm nominal size- All work up to plinth level :

Msand Filling

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding .

Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3, of stone aggregate 20 mm nominal size.

centering and shuttering including strutting, propping etc. and removal of form work for : columns, slabs, beam and lintel

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead In cement mortar

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia& length (Including hold fast lugs or dash fastener and fixing the frame). Second class teak wood

Providing and fixing ISI marked flush door shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws decorative type, and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Cutting holes up to 30x30 cm in walls including making good the same:

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lift.

Filling of Rubbish as directed by incharge

Supplying and fixing of following sizes of medium class PVC conduit 20 mm (Precision/Anchor) along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit 25 mm (Precision/Anchor) along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing following sizes of FRLS (Asmon/Polycab/Finolex) PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVCconduit / PVC casing and capping / Cable Management etc as required.

3 x 1.5 sq.mm

3 x 4 sq.mm

3 x 6 sq.mm

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess i/c providing and fixing 3 pin 25amps modular socket outlet with 25amps plug top and 25amps motor Starter, connection, painting etc as required.( For A.C.Connection, motor starter & socket to be fixed separately in different location). (Legrand Myris)

Supplying and fixing of fan rod upto 75cm

Supplying and fixing suitable size module GI box with modular plate and cover in front on surface or in recess, etc. as required. (Legrand Myris)

3 module

6 module

8 module

Supplying and Fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Legrand Myris)

5/6 Amp Switch

15/16 Amp Switch

3 pin 5/6 Amps Socket outlet

3 pin 15/16 Amps Socket outlet

Supplying and fixing of 20 W - 24 W tube light LED fitting (Philps/Crompton) having luminous efficiency > 100 lumens/watt with electronic driver i/c connections with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing, testing & commissioning etc. as required

Supplying and fixing of 9 W LED blub (Philps/Crompton) with holder with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing, testing & commissioning etc. as required

Supplying and fixing of 100 w flood LED blub (Philps/Crompton) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing, testing & commissioning etc. as required

Supplying and fixing 5 amps to 32 amps rating, 240 / 415 volts, 10 KA 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Legrand/L&T)

Single Pole

Two Pole

Supplying and fixing sheet steel MCB DB 240volts on surface complete with tinned copper bus bar inter connections and power pointer including earthing etc. 12way box (Legrand/L&T)

Removing of fan, light, motor pannel and cable of motor, Switch board etc

OMEGA POWER BUILDERS