Renovation of Conference room and 4 nos of Rest rooms at VSI Airport, Port Blair

Amount

Providing and laying Vitrified tiles (Glossy or matt finsh as decided by EIC) in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). (a) Size of Tile 600 x 600 mm

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing,curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade-Area of Slab upto 0.50 sqm.

Providing and laying Vitrified tiles (Glossy or matt finsh as decided by EIC) in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. (a) Size of Tile 300 x 450 mm

Repairing and refixing of doors / windows shutter i/c removal of shutter from chaukhat, cutting where necessary removing and refixing butt hinges on other side of frame of shutter wherever required. (Cost of hinges i/c fixing shall be paid extra).

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shallbe fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I with extra fitting

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

On cleaned surface providing and applying on the properly prepared surface in SSD condition, a coat of Dr. Fixit Primeseal (dilute 2:1 with water). Including the primer coat shall achieve a coverage of approx. 8-10 sqm/litre includingProviding and applying two coats of Dr. Fixit Raincoat over the primed surface without any dilution including the effective coverage of Dr. Fixit Raincoat shall be 3-3.5 Sqm/ litre for two coats to achieve a DFT of 110-120 microns.

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 microns)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 microns)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost ofaluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness

Providing and fixing sun control film Garware Polyester film on glass panes after thoroughly cleaning of existing surface. The rate is inclusive of removal of worn out/damaged sun control film wherever required.

Providing and fixing to existing door frames 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : (a) Of area 3 sq. metres and below

Providing and Fixing Soap dispenser of Jaquar (ACN-1135N) or Equivalent make with Glass Bottle. All complete as per instruction of EIC.

Providing and Fixing health Faucet of Jaquar (ALD-CHR - 585) or Equivalent make cast copper alloy fancy type chromium plated with stand and flexible pipe. All complete as per instruction of EIC.

Providing and fixing toilet paper holder of Jaquar (ACN-1151N) or Equivalent make: C.P. Brass All complete as per instruction of EIC.

Providing and fixing Vitreous China oval countertop wash basin of approved make and colour of size not less than 500 x 400 x 200 mm with single 15 mm CP. brass pillar tap of approved make with fixing accessories like coupling etc. all complete as per direction of Engineer-in-charge ( The brand and colour preferably of dark shade and pillar tap brand and type will be decided by Engineer-In-Charge).

Providing and fixing wall mounted vitreous china pedestal type water closet of approved make and colour (European type) "S" or "P" with seat and lid, 6 litre (Double push) low level wall hung P.V.C flushing cistern of approved make with drainage l-bend with gasket (CNS-WHT-207) or Equivalent make with stailneless steel fittings & brackets, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, cutting and making good the walls and floors wherever required: W.C. pan with white solid plastic seat and lid :( The brand and colour preferably of dark shade will be decided by Engineer-In-Charge).

Providing and fixing uplasticised PVC connection pipe with brass unions: 60 cm length 15 mm nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer , geyser points, bib cock , stop cap, CP Cap and Nipple etc. of approved quality conforming to IS:8931 15 mm nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer , geyser points, bib cock , stop cap, CP Cap and Nipple etc. of approved quality conforming to IS:8931 25 mm nominal bore.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with stainless steel frame of approved make and shade with hard backing material or fixed with stanless steel studs etc. omplete as per direction of Engineer in Charge

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (a) 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (a) 25 mm nominal outer dia Pipes

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar.

Providing & fixing 15mm to 18mm rubber wood wall panelling including necessary cornice foxed in top/bottom beading using superior quality rubber wood chemically treated edge glued finger jointed rubber wood duly finished with approved shade of colour of polyurethane polish including two coats of approved shade of colour of wood filter putty etc and preparing with sand paper, finishing to match with the adjoining interior etc. complete as per Direction of Engineer-In-Charge..

Credit for taking away the wooden window with the glass.

Credit for taking away aluminium door of size 1 m x 2 m with wooden frame.

Supplying & placing conference table in conference room of SENATE model with wire manager Modular 1 Seater make of Godrej as per direction & to the satisfaction of Engineer-In-Charge.

Bharat Udyog