Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.3 LAccepted-Finance | ₹2.3 L | 1 | Accepted-Finance Found Eligible |
| 2 | 2₹2.3 L+₹1,000 (0.44%)Accepted-Finance BHAGWATI NAGAR JAMMU | ₹2.3 L+₹1,000 (0.44%) | 2 | Accepted-Finance Found Eligible |
| 3 | 3₹2.3 L+₹1,500 (0.66%)Accepted-Finance BHAGWATI NAGAR JAMMU | ₹2.3 L+₹1,500 (0.66%) | 3 | Accepted-Finance Found Eligible |
| Sl No | Description | Qty | Unit | BEE AAR ENTERPRISES L3 | PERFECT ELECTRICAL WORKS L2 | M/S VERMA ELECTRICAL L1 |
|---|---|---|---|---|---|---|
| 1.00 | Complete rewinding of 200 HP induction motors coupled with 6 cusec discharge HC Pump of pumping unit no.2 installed at LIS Ambaran. The job involves disconnecting the electrical connections from the main supply and disassembling the motor by unfastening the foundation nuts and bolts and also decoupling from the pump . Then shifting of motor to safer place for execution of work with the help of chain pulley block as per site condition. Complete disassembling of the motor involves extraction of rotor from stator followed by cleaning of stator and rotor using compressed air, organic solvent, CCL4 etc. to remove the dust particles /silt etc. The job include replacement of damaged winding on stator with new rewinding of coil and complete f class insulation to stator and rotor as required .Varnishing the rotor and stator with Dr. Beck compound or equivalent make of varnish in two coats, drying by hot air process.. Thereafter checking the IR value using megger meter. . Providing and fitting of 02 no. bearings ( 6319 at non driving end & NU 319 C3 at driving end ) . Greasing of the bearings properly. Then reassembling of the motor and stator at site Providing/fitting of thimbles as per sample which includes crimping. Refitting the motor at its installed position and coupling with pump, making of electrical connections, alignment with pump testing of motor on full load. Complete job includes the cost of material, hiring charges of tools & tackles, to and fro transportation charges from LIS to workshop. Also, labour charges for skilled and semiskilled labour to be employed at site for execution of job . Complete job.
Note – Rebate on old scrap @3% | 1 | Job | 4,590 ₹2,24,910 | 4,580 ₹2,24,420 | 6,840 ₹2,21,160 Lowest |
Tender Value
₹2.3 L
EMD Value
₹4,600
Closing Date
29 May 2026, 2:00 pmClosed
Executive Engineer MID Akhnoor/Nowshera
Office of Executive Engineer MID Akhnoor/Nowshera
Complete rewinding of 200 HP induction motors coupled with 6 cusec discharge HC Pump of pumping unit no.2 installed at LIS Ambaran.
2026_IFC_310206_1
MID/AN/04
Open Tender
Machineries/ Mechanical Engg Items
Item Wise
15 days
AKHNOOR
Please refer Tender documents.
7 documents required · 7 mandatory
₹200
Executive Engineer MID Akhnoor/Nowshera
₹4,600
Executive Engineer MID AKHNOOR/NOWSHERA
9 Jun 2026
18 May 2026
30 May 2026
18 May 2026
29 May 2026
19 May 2026
20 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Complete rewinding of 200 HP induction motors coupled with 6 cusec discharge HC Pump of pumping unit no.2 installed at LIS Ambaran. The job involves disconnecting the electrical connections from the main supply and disassembling the motor by unfastening the foundation nuts and bolts and also decoupling from the pump . Then shifting of motor to safer place for execution of work with the help of chain pulley block as per site condition. Complete disassembling of the motor involves extraction of rotor from stator followed by cleaning of stator and rotor using compressed air, organic solvent, CCL4 etc. to remove the dust particles /silt etc. The job include replacement of damaged winding on stator with new rewinding of coil and complete f class insulation to stator and rotor as required .Varnishing the rotor and stator with Dr. Beck compound or equivalent make of varnish in two coats, drying by hot air process.. Thereafter checking the IR value using megger meter. . Providing and fitting of 02 no. bearings ( 6319 at non driving end & NU 319 C3 at driving end ) . Greasing of the bearings properly. Then reassembling of the motor and stator at site Providing/fitting of thimbles as per sample which includes crimping. Refitting the motor at its installed position and coupling with pump, making of electrical connections, alignment with pump testing of motor on full load. Complete job includes the cost of material, hiring charges of tools & tackles, to and fro transportation charges from LIS to workshop. Also, labour charges for skilled and semiskilled labour to be employed at site for execution of job . Complete job.
Note – Rebate on old scrap @3% | 1 | Job | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
BOQ_1003758.xls
BOQ • 0.29 MB
ext04.pdf
PDF • 0.50 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .