SPL REPAIR OF BLDG T241 AND PROVN OF TOILET BLC AT 263 FD WKSP COY EME AND MEC TPT AREA BLDG P-303 OF 27 MADRAS AND STATIC WATER TANK EXIST STN MAG BLDG P12 ALONGWITH ONE PORTABLE FIRE PUMP AND MASONARY DRAIN FROM BLDG P-37 TO CHAURCH AT MIL JAMNAGAR

Amount

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for keys scrubbing down with water etc. complete all as specified and directed by Engr-in-Charge

Dismantaling floor, hearth or wall tiling including cement mortar bedding(but not backing) removing servicable tiles to store and rubbish off premises complete all as specified and directed by Engr-in-Charge

Taking down chowkats with shutter (without taking off shutters from the frames) exc 1.5 sqm but n exc 4 sm each,complete all as specified and directed by Engr-in-Charge

Taking down shutter of any description exc 1sqm each and n exc 2Sqm each, complete all as specified and directed by Engr-in-Charge

Taking down PVC Chowkats or Frames, not exc. 1.50 Sqm Each with Shutters (without Taking Off Shutters from the Frames), complete all as specified and directed by Engr-in-Charge

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed by Engr-in-Charge

Demolition Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level complete all as specified and directed by Engr-in-Charge

Demolition of brick work or stone/boulder masonary built in CM including all quoins, arches, pillars, etc but excluding ashlar, facing, dressed stone work and pre-cast concrete articles complete all as specified and as directed by Engineer-in-Charge

M&L for Prepration of newly plastered on walls by hand held sander / long handle sander including cornices, pilasters etc complete all as specified directed and applying two coat of oil bound distemper over a coat of alkali resistant priming paint, over a coat 3mm thick wall care putty on walls complete all as specified and directed by Engr-in-Charge

M&L for Prepration by hand held sander / long handle sander including cornices, pilasters etc of newly plastered on wall complete all as specified directed and applying three coat of white wash, complete all as specified and directed by Engr-in-Charge

M&L complete removal of existing tretment by hand held sander / long handle sander washing down with Jet washer and appliying Airless spray two or more coats of 100 % premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @1.43 litre/10Sqm over and including priming coat of exterior primer applied @ 0.9 ltr/10sqm complete all as specified and directed by Engr-in-Charge

Complete removal of existing treatment of old surfaces of wall including preparation of surfaces by hand held sander / long handle sander including cornices, pilasters etc and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 3mm thick wall care putty complete all as specified and directed by Engr-in-Charge

M&L Preparation of old surfaces of wall removing nails including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc by hand held sander / long handle sander including cornices, pilasters etc (Plastered or unplastered surfaces) , filling undulation and holes with putty and applying one coat of oil bound distemper with roller finish complete all as directed.on walls etc.complete as specified and as directed by Engineer-In-Charge.

Preparation of old plastered surfaces of ceiling by hand held sander / long handle sander including cornices, pilasters etc and applying one coat of white wash complete all as specified and directed by Engr-in-Charge

Preparation of old plastered surfaces of wall surface by hand held sander / long handle sander including cornices, pilasters etc and applying one coat of white wash complete all as specified and directed by Engr-in-Charge

M&L preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge

Complete removal of existing roof treatment, removing rubbish off the premises, cleanning the surface and preparing to receive new roof treatment and applying roof treatment as under:- (a) 10 mm thick plastering in Cm (1:3) using 100 % coarse sand on roof/ parapet walls/ side walls with wpc / liquid as per manufacturer instructions (b) Applying coat of bituminios primer @ 0.40 litre/ Sqm on prepared surfaces and allow to dry(the primer and the membrane to be used shal be of same manufacturer, (c) Supply and laying of minimum 3 mm thick APP modified polymeric membrane weighting not less than 3 KG/ Sqm black finish reinforcement with non woven polyster matt with help of torching with proplane or abutance gas using torch with minimum 75 mm side overlap and 100 mm end overlap. (d) all overlaps and joints shall be sealed as per manufacturers instruction complete all as specified and directed.note : wpc shall be measured and paid sepearately.

Roughening surfaces of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc incl brushing neat cement slurry with 3.0 kg of cement per sq metre complete all as specified and directed by Engr-in-Charge

M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed by Engr-in-Charge

M&L for Rendering 10mm thick in CM(1:3) with using water proofing compound on fair faces of brick work/ Fasia and roof surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge

M&L 25mm thick PCC 1:2:4, type B0 (using 12.5mm size stone aggregate) as levelling course complete all as specified and directed by Engr-in-Charge

M&L 40mm thick PCC 1:2:4, type B0 (using 12.5mm size stone aggregate) using integral WPC as per manufacturer instuctions will compacted with V shaped groove of 10mm deep filled with mastic bitumen size of PCC panel with groove shall not exceeding 0.4 sqm complete all as specified and directed by Engr-in-Charge

S & F PVC door with chowkhats frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing. complete all as specified and directed by Engr-in-Charge

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete, all as specified & directed. make - rajshree or equivalent.

M/L 2nd class Hardwood chowkhats, plain, solid, straight, wrought, framed, rebate on the solid,rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engr-in-Charge

M&L for Hold fast for fixing of chowkats and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed by Engr-in-Charge

Providing cement concrete type BO 1:2:4 (12.5mm graded aggregate) in cills, steps, seismic and other similar bands plinth coureses string courses lacing courses parapets and railing copings kneelers apex bed plates kerbs. etc.. water troughs and the like including wethering slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge

S&F for 35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and fitted to chowkhats complete all as specified and directed by Engr-in-Charge

S&F Glazed and skelton shutters, 35 mm thick of Second class hard wood open rebated and prepared to receive glass, gauge etc without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), chemically treated, complete, complete all as specified and directed by Engr-in-Charge

S&F powder coated anodised aluminium alloy sections 3 tier track sliding windows series B of size 92mm x 31.75mm x 1.2mm and shutter section 18mm x 43mm x 1.30mm weight 0.547 kg/m Jindal or equivalent duly fitted with neoprene beading, glazing clips, tinted glass panes 4.80/5.0 mm nominal thickness, stainless steel wire cloth 0.36 mm dia and average width of aperture 1.4 mm, aluminium alloy handles etc including taking down old window in any size and make. complete all as specified and directed by Engr-in-Charge Note : rate shall include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc

M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge

S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge

S&F Floor door stopper of aluminium alloy body and tongue, anodised, 140 mm with hard drawn steel spring, fixed in floor complete all as specified and directed by Engr-in-Charge

S&F in repair stainless steel wire cloth 0.36mm dia of wire and avarage width of aperture 1.40mm and fixed with stainless steel wire staple in any type of windows/doors complete all as specified and directed by Engineer-In-Charge.

M/L two coats of synthetic enameled painting over a coat of pink primer to new wooden surfaces of any description exc 10 cm width or girth. complete all as specified and directed by Engr-in-Charge

S&F aluminium anodised, barrel tower bolt of extruded section 100mm long, complete all as specified and directed by Engr-in-Charge

S&F 100 mm long aluminium handle, cast type, anodised complete all as specified and directed by Engr-in-Charge

S & F Non Skid Ceramic Colour Tiles 7 to 8 mm thick area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm in floor , skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.complete all as specified and directed by Engr-in-Charge

M&L for 18-20mm thick Kota stone slab machine cut, in stair treds, bathroom platforms, shelf platforms etc. bedded and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing complete over and including 15 mm thick screed bed in CM 1:4 and polishing complete all as specified and directed by Engr-in-charge.

M&L for 18-20mm thick Kota stone slab machine cut, in riser of steps, skirting, dado and pillar etc. bedded and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing complete over and including 10 mm thick screed bed in CM 1:3 and polishing complete all as specified and directed by Engr-in-charge.

Taking up or down steel tubing and connections including bore of pipe 25 mm complete all as specified and directed by Engr-in-Charge

Taking up or down steel tubing and connections bore of pipe 20 mm complete all as specified and directed by Engr-in-Charge

Taking up or down steel tubing and connections bore of pipe 16 mm complete all as specified and directed by Engr-in-Charge

Supplying and laying of 16 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape in any requirement complete to walls and ceilings or laid in floors iincluding all connected brass cpvc fittingsand cutting grooves, filled with CM1:6 complete all as specified and directed by Engr-in-Charge

Dismantling exc 500 & n exc 1000 ltrs water tanks and removing from site complete all as specified and directed by Engr-in-Charge

S & F in repairs 1000 liters rotaional moulded polyethylene water storage tank, double layered (cylindrical vertical with closed top cover) as per IS-12701-1996 and PTMT 20mm ball valves/ float valve high pressure with epoxy aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm - 210 gms) , hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc, complete as specified in SSR Part-I complete all as directed by Engr -in-charge.

S&F in repair fancy type Bib taps, cast copper alloy 15mm dia with long handle, screwed down, screwed for iron pipe incl female brass threaded adaptor on CPVC pipes complete all as specified and directed by Engr-in-Charge

S&F in repair Fancy type Stop valves angle /concealed 15mm bore, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed incl female brass threaded adaptor on CPVC pipes complete all as specified and directed by Engr-in-Charge

S&F in repair 15mm fancy type Pillar taps, cast copper alloy, with long heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge

S & F PVC (SWR) junction single (single T) equal or unequal 110mm bore, with access door complete all as specified and directed by Engr-in-charge.

S & F PVC (SWR) junction single (single T) equal or unequal 75mm bore, without access door complete all as specified and directed by Engr-in-charge.

M&L for cement concrete 1:2:4 type B-0 (12.5 mm aggregate) sub base of floors , mass concrete complete all as specified and directed by Engr in charge.

Taking down floor trap/nahani trap of any description any size and making good to disturbed portion with cement concrete type B-1 1:2:4 with water proofing compound complete all as specified and directed by Engr-in-Charge

S & F in repair vitreous china wash down water closet pan (pedestral pattern) white including fixing to flushing cistern and flush pipe and plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel hinging device. complete all as specified and directed by Engr-in-Charge

S & F in repair Vitreous China wash basin, white, flat back, size 550mm x 400 mm with & including a pair of cast iron brakets embedded in PCC 1:3:6) type C-1 (using 20mm graded stone aggregate), blocks of size 10x7.5x15cm , and 32 mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts,flange end bedded in red lead cement and other end fixed, ( excluding tap ) including PVC Waste coupling of PTMT 32mm dia (half or full threaded) Minimum weight 45gms , washers and Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete as specified and directed by Engr-in-Charge.

S&F in repair Soap dish of any type (S/S) approximate size 160x160 fixed to plugs with chromium plated brass screws including taking down old complete all as specified and directed by Engr-in-Charge

S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed by Engr-in-Charge

S&F in repair 25mm dia stainless steel curtain rail, cut in required length and size to fit with opening incl fixing on bracket with necessary screws fitted on bracket and decorative nobs on sides with necessary arrangement complete all as specified and as directed by Engr-in-charge.

S&F in repairs curtain rod side brackets of stainless steel, angular or cantilever type fixed to wall with 02 nos screws on each bracket and fitted screws for fixing curtain rod incl CP/stainless steel carved decorative design plain metal colour nobs with fixing arrangement for curtain rod using a screw complete all as approved and shown by Engr-in-charge.

M&L for racking of cracks upto 5 mm wide ,preparation and crack filling with ready to use crack fiber reinforced filler /chemical based crack fillers by approved manufacturer and filling as per manufacturer instructions in walls,roofs of any type or size complete all as specified and directed by Engr-in-Charge

M&L for racking of cracks exc 5 mm but not exc 10mm wide ,preparation and crack filling with ready to use crack fiber reinforced filler /chemical based crack fillers by approved manufacturer and filling as per manufacturer instructions in walls,roofs of any type or size complete all as specified and directed by Engr-in-Charge

M&L 15mm thick rendering in cement plaster 1:3 with WPC on bottom and side walls of sunken floor incl finished even and smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge

Removing the plant/growth of any description size, any location of external surfaces of walls shafts by cutting & remvoing the roots completely spraying the suitable chemical (each plant 100 ML) in the removed portion to avoid re-growth & making good damaged portion to match the existing surfaces by PCC type B0 (1:2:4) 12.5 mm graded aggregate complete all as directed by Engr In Charge (Chemical :- Gramzone/Roundup or equavalent suitable chemical to remove/destroy the plants/roots)

Removal of all loose/unsound/bad/damaged concrete or plaster existing RCC structure of slab/beams/walls/chajja by using chesel/hammar .Cut and remove unsound reinforcement bars, wires etc without damaging the sound reinforcement . clean loose rust from bars manually with brush . fixing new supplymentary bars if required,either by tying it with existing bars or by welding on it. Applying eppoxy bonding agent and making good with polymer modified plaster/micro concrete as required thickness over a coat of rust removing alkaline primer and match the finishing to the existing surface in ground floor including formwork complete all as specified and directed by Engr-in-Charge

M&L Cleaning vertical and horizontal surfaces of sunken slab using wire brushing followed by sanding with emery paper for loose materials/dust and applying two coats of epoxy resin component (Dr. Fixit DAMPGUARD or equivalent) solution/mix using nylon brush pouring Base part in appropriate container followed by the Hardner part and mix thoroughly to attain homogeneous smooth paste and dilute the mixed compound with water in ratio 1 part Base: 1 part Hardner: 1 part water by slow addition and mix thoroughly until a brushable consistency is obtained, first coat will be allowed to dry for 6 to 8 hrs before application of second/final coat) incl curing treated surface for 24 hrs complete incl applying evenly a coat of blown bitumen @ 1.5kg/sqm over entire treated surfaces incl spout holes complete and all as specified as per manufacturer instruction. complete all as specified and directed by Engr-in-Charge

M&L for 40 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate mixed with liquid water proofing compound as per manufacture instruction in bottom of sunken floors floors. complete all as specified and directed by Engr-in-Charge

Supply only of Intergral water proofing compound complete all as specified and directed by Engr-in-Charge

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth on brick walls complete all as specified and directed by Engr-in-Charge

M&L for Brickwork with fly ash moudular bricks built in CM (1:4) , straight or curved on plan exc 6m mean radius, complete all as specified and directed by Engr-in-Charge

S&F in repairs 2 in 1 wall maounted mixer (15 mm bore) with quater turn fittings and provision for overhead shower with 115 mm bend pipe and wall flange, cast copper alloy with capstan heads, fancy type chromium plated (robotic electroplating for everlasting lustrous shine) with 2 water volume adjustment knobs one both side to control the flow of temperature ,screwed down, screwed for iron pipe or for brass ferrule and fixed includng neccesary fittings complete for mixing hot and cold water for tap and shower all as specified and directed by Engr-in-charge.

Refixing of shutters of any description exc 1.0 sq. m but n exc 2.0 sq. m to same opening with necessary welding/ scres as per site requirement complete all as specified and directed by Engr-in-Charge

Demolition Cement Concrete (reinforced) in Roofs, floors (other than ground floors), beams, shelfs, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engr-in-Charge

M&L RCC 1:2:4 Type B-1 (20mm aggregate) nominal mix as Slabs supported on walls, beams and columns in floors, roofs, etc. complete all as specified and directed by Engr-in-charge.

M&L for Formwork to flat soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge

S&F 15mm fancy type Pillar taps, cast copper alloy, with long heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge

S & F vitreous china squatting pan `Orissa` pattern size 580x440mm white with P or S trap front or back inlet and with intergal foot rests . complete all as specified and directed by Engr-in-Charge

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including brackets including cutting for and pinning in ends of brackets or erecting stand including chromium plated 32 mm waste coupling , chromium plated bottle traps with inlet and outlet screwed for pipe or connection incl necessary packing,etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-Charge

S&F 125mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed by Engr-in-Charge

Excavating over areas, n exc 1.5 m deep and getting out complete all as specified and directed by Engr-in-Charge

Excavating over areas hard/dense soil for each additional 1.5 m or part there of in depth beyond the first 1.5 m (exc 1.5m but n exc 3.0m depth ) complete all as specified and directed by Engr-in-Charge

-do- as item No 3 herein before but exc 3.0m but n exc 4.5m depth complete all as specified and directed by Engr-in-Charge

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 30 cm thick, spread, levelled and rammed including watering complete all as specified and directed by Engr-in-Charge

M & L for hard core (broken stone) of gauze n exc 63mm deposited, spread in layers n exc 15cm thick, watered and rammed to a true surface. complete all as specified and directed by Engr-in-Charge

M&L for MS TMT bars 8mm dia and over cut to length, bent to shape required, including cranking, bending,spirally for hoping for columns, hooking end and binding with and incl mild steel wire (annealead) not less than 0.9mm dia, complete all as specified and directed by Engr-in-Charge

M&L 1:1.51:2.92 Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed by Engr-in-Charge Note : Min cement content 425kg/Cum, coarse aggregate 20mm (60%) + 12.5 (40%), slump 50mm and w/c ratio 0.4. Before commencement of work contractor will carry out Trial Mix at site and take the trial mix approval by GE. ( avg comp strength 7 days 33.33 N/mm2 and 28 days 44.85 N/mm2)

M&L 1:1.51:2.92 Walls, Columns, pillars, piers, posts and struts Note : Min cement content 425kg/Cum, coarse aggregate 20mm (60%) + 12.5 (40%), slump 50mm and w/c ratio 0.4. complete all as specified and directed by Engr-in-Charge

Formwork to sides of pillars, posts, struts, piers, columns and stanchions rouugh finishedcomplete all as specified and directed by Engr-in-Charge

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished of concrete complete all as specified and directed by Engr-in-Charge

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter rouugh finished complete all as specified and directed by Engr-in-Charge

M&L 5mm thick rendering on fair faces of external wall of brick masonary or concret surfaces in cm 1:4 finished mixed with water proofing compound.complete all as specified and directed by Engr-in-Charge

M&L M&L for PCC 1:3:6 type C1(20mm graded stone aggregate) pre-cast solid cement concrete block masonry with solid block exc 10 CM in width and setting in cement motar 1:6 complete complete all as specified and directed by Engr-in-Charge

Material and labour for precast cement concrete reinforced (measured separately) 1:2:4 type B-1 using 20mm graded stone aggregate set in Cement Mortar 1:4 as in drain covers, cover slabs etc. complete incl formwork, complete all as specified and directed by Engr-in-Charge

M&L for MS round bars 10mm dia and over cut to length, bent to shape required, including cranking, bending,spirally for hoping for columns, hooking end and binding with and incl mild steel wire (annealead) not less than 0.9mm dia, complete all as specified and directed by Engr-in-Charge

S&F PVC water bar 150mm wide 8 to 10mm thick complete all as specified and directed by Engr-in-Charge

M&L applying two coat of black bituminus paint on Surfaces of any description wood,steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth. complete all as specified and directed by Engr-in-Charge

Surface dressing n exc 15cm deep and getting out in Soft/ loose soil. complete all as specified and directed by Engr-in-Charge

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge

M&L for plain cement concrete 1:4:8, type D2 using 40 mm graded aggregate in foundations, filling and mass-concrete complete all as specified and directed by Engr-in-Charge

M&L brickwork with old size flyash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge

M&L brickwork with old size flyash bricks straight or curved on plan to any radius half brick thick built in CM 1:4 complete all as specified and directed by Engr-in-Charge

Returning filling in including spreeding, leveling, watering and well ramming in layers n. exc 25 cm thick in soft /loose soil complete all as specified and directed by Engr-in-Charge

Removing excavated material (soil) n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point etc complete all as specified and directed by Engr-in-Charge

S & F TMT steel bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips, Gde of steel shall be Fe-500/ Fe-500d/ Fe-550/ Fe-550d complete all as specified and directed by Engr-in-Charge

S & F TMT steel bars, 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips , Gde of steel shall be Fe-500/ Fe-500d/ Fe-550/ Fe-550d complete all as specified

M&L 1:1.51:2.92 in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete Note : Min cement content 425kg/Cum, coarse aggregate 20mm (60%) + 12.5 (40%), slump 50mm and w/c ratio 0.4. Before commencement of work contractor will carry out Trial Mix at site and take the trial mix approval by GE. ( avg comp strength 7 days 33.33 N/mm2 and 28 days 44.85 N/mm2)

M&L for form work to sides of flat, rough finished surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical to batter.complete all as specified and directed by Engr-in-Charge

M&L 1:1.51:2.92 in beams,cantilevers, bressummers, lintel over 1.5m span ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses Note : Min cement content 425kg/Cum, coarse aggregate 20mm (60%) + 12.5 (40%), slump 50mm and w/c ratio 0.4. Before commencement of work contractor will carry out Trial Mix at site and take the trial mix approval by GE. ( avg comp strength 7 days 33.33 N/mm2 and 28 days 44.85 N/mm2)

M&L for formwork to flat rough finished surfaces to sides of soffits of floor or roof beams, beam haunchings, girders, bressummers lintels, cantilevers, shelves inculding supports overhangs etc also splays between floors and beams etc complete all as specified and directed by Engr-in-Charge

M&L 1:1.51:2.92 in coloumns, pillars, piers, posts and struts ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses. Note : Min cement content 425kg/Cum, coarse aggregate 20mm (60%) + 12.5 (40%), slump 50mm and w/c ratio 0.4. complete all as specified and directed by Engr-in-Charge

M&L for formwork to square rectangular or polygonal rough finished surfaces to sides of pillars posts structs piers columns and stanchinons complete all as specified and directed by Engr-in-Charge

M&L 1:1.51:2.92 in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. Note : Min cement content 425kg/Cum, coarse aggregate 20mm (60%) + 12.5 (40%), slump 50mm and w/c ratio 0.4. Before commencement of work contractor will carry out Trial Mix at site and take the trial mix approval by GE. ( avg comp strength 7 days 33.33 N/mm2 and 28 days 44.85 N/mm2)

M&L for formwork to flat rough finished surfaces of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engr-in-Charge

Applying evenly a tack coat of industial bitumen primer 85/25 as approved by Engr-in-Charge @ 1.2Kg/sqm over for use in damp proofing treatment on dried surface of concrete including cleaning surface complete all as specified and directed by Engr-in-Charge

Supply and laying , APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gm/Sqm laid on primed surface by forced application, complete all as specified and directed by Engr-in-Charge

M&L for Rendering 10mm thick in CM(1:3) with using water proofing compound on fair faces of brick work/ Fasia and roof surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge

M&L 40mm thick PCC 1:2:4, type B0 (using 12.5mm size stone aggregate) using integral WPC as per manufacturer instuctions will compacted with V shaped groove of 10mm deep filled with mastic bitumen size of PCC panel with groove shall not exceeding 0.4 sqm complete all as specified and directed by Engr-in-Charge

Rendering 10mm thick on fair faces on brick masonary or concrete surfaces in cm 1:6 finished complete all as specified and directed by Engr-in-Charge

M&L for Prepration by hand held sander / long handle sander including cornices, pilasters etc of newly plastered on wall complete all as specified directed and applying three coat of white wash, complete all as specified and directed by Engr-in-Charge

M&L 15 mm thick rendering on other than fair faces of external wall of brick masonary or concret surfaces in two layers Ist layer shall be 10mm in cm 1:6, secound and final layer shall be 5mm thick in CM 1:4 finished fair and even without using extra cement mixed with integral water proofing compound complete all as specified and directed by Engr-in-Charge

M&L Prepration of newly plastered surface of wall by hand held sander / long handle sander including cornices, pilasters etc and appliying with Airless spray two or more coats of 100 % premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @1.43 litre/10Sqm over and including priming coat of exterior primer applied @ 0.9 ltr/10sqm complete all as specified and directed by Engr-in-Charge

M&L 5 mm thick rendering on ceiling or concret surfaces in cm 1:3 finished complete all as specified and directed by Engr-in-Charge

M&L for Prepration by hand held sander / long handle sander including cornices, pilasters etc of newly plastered on ceiling complete all as specified directed and applying three coat of white wash, complete all as specified and directed by Engr-in-Charge

Supply only of liquid water proofing compound as per manufactures instruction complete all as specified and directed by Engr-in-Charge

S & F PVC door with chowkhats frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening complete all as specified and directed by Engr-in-Charge

S & F factory made solid panel PVC door shutter 30mm thick (style) make "RAJSHRI" consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed tothe stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixed to frame at site complete as directed of Engr-in-Charge

S&F powder coated anodised aluminium fixed louvered ventilator frame of size 63.5 x 38.1 x 1.01 mm thick or equivalent section fixed in vertical position with aluminium vertical members and half portion to be provided with 4 mm thick pinhead glass and remaining portion to be louvered using 4 mm thick pinhead glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm incl necessary channel frame work, including rubber gasket and aluminium beading including taking down old ventilator in any size and make complete all as specified Note : rates shall include all glazing/SS wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading etc

S & F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-Charge

M&L preparation of new untreated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome. complete all as specified and directed by Engr-in-Charge

S&F mild steel medium weight cold rolled butt hinges 100 mm long complete all as specified and directed by Engr-in-Charge

S&F aluminium anodised, barrel tower bolt of extruded section 150mm long, complete all as specified and directed by Engr-in-Charge

S&F 125 mm long aluminium handle, cast type, anodised complete all as specified and directed by Engr-in-Charge

S&F aluminium alloy anodised sliding door bolt with hasp staple(bolt type) ,250 mm long,and fixing clip of sheet cast or extruded section or fixing bolt cast aluminium alloy and fixed. complete all as specified and directed by Engr-in-Charge

M&L Hardcore nexc 63 mm gauge of broken stone agg deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge

M&L 100 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate in sub base to flooring complete all as specified and directed by Engr-in-Charge

M&L for bringing approved moorum/red bajri filling in floors or pavings laid in layers n exc 15cm thick spread levelled and rammed including watering complete all as specified and directed by Engr-in-Charge

M&L for screed bed or bedding 15mm thick in CM 1:4 on floor to receive tile.complete all as specified and directed by Engr-in-Charge

S & F Non Skid Ceramic Colour Tiles 7 to 8 mm thick area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. complete all as specified and directed by Engr-in-Charge

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge

Moulding to Granite(single or double) slab including rounding off edges for 20 mm thick slabs including grinding and polishing complete all as specified and directed by Engr-in-Charge

M&L rendering 10 mm thick in CM 1:3 on wall to receive tile. complete all as specified and directed by Engr-in-Charge

M& L glazed cermic coloured tile in vertical surfaces 300x450x7 mm thick set and joited in neat cement slurry and poited in white or coloured cement to match complete all as specified and directed by Engr-in-Charge

M & L 75mm for PCC 1:2:4 type C2 (using 40mm graded stone aggregates) as in flooring, finished surface even & smooth without using extra cement laid to slope 1:12 in alternate bays each bay not exceeding 2.5m length, 10mm groove at junction of wall and plinth protection complete all as specified and directed by Engr-in-Charge

Forming construciton joints 30mm deep x 10mm wide filled with sealing compound grade 'B'. Complete all as specified and directed complete all as specified and directed by Engr-in-Charge

M & L 75mm for PCC 1:3:6 type C2 (using 40mm graded stone aggregates) as in flooring complete all as specified and directed by Engr-in-Charge

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge

S&F Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed by Engr-in-Charge

Supplying and laying of 15 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape in any requirement complete to walls and ceilings or laid in floors iincluding all connected brass cpvc fitting sand cutting grooves, filled with CM1:6 complete all as specified and directed by Engr-in-Charge

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape complete to walls and ceilings or laid in floors including all connected brass cpvc fittings and cutting grooves, filled with CM1:6 complete all as specified and directed by Engr-in-Charge

Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape in any requirement complete to walls and ceilings or laid in floors iincluding all connected brass cpvc fittingsand cutting grooves, filled with CM1:6 complete all as specified and directed by Engr-in-Charge

S&F Rotational moulded polyethylenewater storage tanks 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engr-in-Charge

S & F Ball 25mm brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed incl female brass threaded adaptor on CPVC pipes complete all as specified and directed by Engr-in-Charge

S & F PP-R ball valves (brass insert) as per requirement of the site 25mm dia of pipe incl male brass threaded adaptor on both end of CPVC pipes complete all as specified and directed by Engr-in-Charge

S&F fancy type Bib taps, cast copper alloy 15mm dia with long handle, screwed down, screwed for iron pipe incl female brass threaded adaptor on CPVC pipes complete all as specified and directed by Engr-in-Charge

S&F Fancy type Stop valves angle /concealed 15mm bore, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed incl female brass threaded adaptor on CPVC pipes complete all as specified and directed by Engr-in-Charge

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engr-in-Charge

S&F PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed by Engr-in-Charge

S&F 110mm PVC (SWR) branch piece double (double Y)equal or unequal with access door complete all as specified and directed by Engr-in-Charge

S&F PVC (SWR)110 mm bend bore bends with access door any radius. complete all as specified and directed by Engr-in-Charge

S&F PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge

S&F PVC(SWR) bend any radius, 75 mm dia. complete all as specified and directed by Engr-in-Charge

S&F 75mm PVC (SWR) branch piece double (double T)equal or unequal with access door complete all as specified and directed by Engr-in-Charge

M&L 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge

S & F vitreous china wash down water closet pan (pedestral pattern) white including fixing to flushing cistern and flush pipe and plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel hinging device.complete all as specified and directed by Engr-in-Charge

Supply and fixing PVC flushing cistern, white, 10ltr capacity with 32mm dia flush pipe any lenth fixed to water closed complete all as specified and directed by Engr-in-Charge

S&F oval bowl counter Vitreous china wash basin (560x400x205mm), white including mounting on granite slab 20mm thick brass chromium plated perforated waste coupling/fittings 32mm dia with long screwed shanks and fly nut, flange end bedded in red lead cement and other end fixed and chromium plated bottle traps with inlet and outlet screwed for pipe or connection incl necessary packing complete all as specified and directed by Engr-in-Charge

S&F Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. including waste coupling suitable for urinals Min weight 32mm-45gms including chromium plated bottle traps with inlet and outlet screwed for pipe or connection incl necessary packing having minimum water seal of 25mm complete all as specified and directed by Engr-in-Charge

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-Charge

S&F Soap dish of any type (SS) approximate size 160x160 fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge

S&F Brass chromium plated Tublar towel rail 20mm dia D type 60 cm long between flanges complete all as specified and directed by Engr-in-Charge

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr-in-Charge

S&F PVC (SWR) vent cowl,110 mm dia complete all as specified and directed. complete all as specified and directed by Engr-in-Charge

Cutting openings through stone masonry walls built in cement mortar for door, window and other opening or enlarging existing openings etc or cutting out defective masonry for under pinning including providing fixing and removing shoring cleaning and stacking stone and removing surplus to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge

M&L for PCC type C2 (1:3:6) using 40 mm graded stone aggregate) as bed in surface channels and foundations,filling and mass concrete etc complete all as specified and directed by Engr-in-Charge

M&L Brick work with fly ash bricks old size , straight or curved on plan exc 6 m mean radius , built in CM 1:4 complete all as specified and directed by Engr-in-Charge

M&L 10mm thick rendering on external wall surfaces in cement plaster 1:4 with WPC Finished even & smooth W/o using extra cement complete all as specified and directed by Engr-in-Charge

M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggegate) as in copinges, plinth band, parepetes, ralinges upto 60 cm in height etc complete including necessary form work complete all as specified and directed by Engr-in-Charge

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds mitered/stopped ends etc.. complete all as specified and directed by Engr-in-Charge

M&L Reinforced concrete pipes 300mm ,class NP 2 laid and jointed complete with collars (complete all as specified and directed by Engr-in-Charge

M&L Cement concrete in cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) to 300mm dia to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested all as specified and as directed.

M&L Precast cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in manhole covers and set in cement mortar 1:6 including necessary forms Works, moulds, etc complete all as specified and as directed.

S&F tube GI medium grade 20 mm dia with all fittings laid in trenches complete acomplete all as specified and directed by Engr-in-Charge

S&F tube GI medium grade 25mm dia with all fittings laid in trenches complete complete all as specified and directed by Engr-in-Charge

S&F gun metal valvs with iron wheel head ,screwed both ends for iron pipe and fixed of size 20 mm complete all as specified and directed by Engr-in-Charge

M&L On site LLDPE septic tank CONVENTIONAL 10 USER designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete all as specified and directed by Engr-in-Charge

M&L On site Hume Pipe septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete all as specified and directed by Engr-in-Charge

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down ceiling fan/ Exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Jamnagar complete all as specified and as directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One light point controlled by one, two way switch 5 Amps

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

Description all as per item No 195 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. (power point)

Description all as per item No 195 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. (Ind board)

Description all as per item No 195 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. (Ind board)

Description all as per item No 195 here in before but using 4.0 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for necessary running of 4.0 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. (For geyser)

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and,cutting chases for concealed water,tubing or concealed conduit wiring,,etc., and making good, cutting not,exc 10 cm girth ®(stone massonary / Brick )

S & F for modular switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.

S & F for modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.

S & F for modular switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified.

S & F for modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete.

S & F for modular step type fan regulator (BLDC) 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F for switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed.

S & F for socket outlet 2-in-1, 5 pin, 5 amp, 230 Volts complete all as specified and directed.

Switch socket combination 2 in 1, 3 pin, and 15 Amp flush type universal , 230 Volts complete all as specified and directed.

S & F for ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 4.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 4 sqmm cable,one run of 4 sqmm cable and one run of PVC conduit will be measured as one unit

S & F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary(concealed in wall) etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for MCB Tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Labour only for refixing the celing fan obtained from item No 4 above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc.complete all as specified and directed by Engr-in-Charge

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065-ALI or its equvalent in Philips, Havells.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Cat part No ENXT P 24L WH CR PC SD (Edge plus series) or its equvalent in Philips, Wipro.

S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20 mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-Charge

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

S & F Sheet metal enclosures with socket plug top and single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20Amp MCB SP 'C' series of 240 volts complete all as specified and directed by Engr-in-Charge.Note:- "metal enclosures concealed in wall".

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc.

S & F for LED tube light fitting 2 feet x 10 watts mirror type with high out put diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and directed by Engr-in-Charge

S & F for energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

Supply and install electric driven fire pump horizontal end suction, centrifugal type, CI casing and bronze impeller stainless stainless steel shaft, suitable for delivering 1620 LPM, 70 meter head, 2900 RPM, including installation with prime moving arrangement one complete all as specified and as directed by engineer in charge at site.

Supply & fix fire hydrant landing vale type A (single head outlet) of 63 mm dia conforming to IS 5290 complete all as specified and directed by Engr-in-Charge

Supply and fix hose box for hose reel of 63 mm size of 30 meter length complete with coupling branch pipe and nozzle, MS sheet 2 mm thickness complete all as specified and directed by Engr-in-Charge

Supply and fix 63 mm dia 30 meter long hose conforming to IS 636 complete with male and female coupling conforming to IS 903 complete all as specified and directed by Engr-in-Charge

Supply and fix branch pipe with nozzle of 20 mm dia for hose reel conforming to IS 8090 complete all as specified and directed by Engr-in-Charge

Supply and fix fire hydrant stand post with provn of single outlet conforming to IS 908 complete all as specified and directed by Engr-in-Charge

Supply and fix MS flanged pipe 65mm NB heavy duty for fire hydrant duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer complete all as specified and directed by Engr-in-Charge

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5core complete all as specified and directed by Engr-in-Charge

Supply and fix valves, sluice, flanged of class 1.6 PN, 65 mm (2.5”) dia complete all as specified and directed by Engr-in-Charge

Supply and fix valve, reflux, with by-pass Arrangement, 65 mm (2.5”) dia complete all as specified and directed by Engr-in-Charge

sanu enterprise (BID ID -3339873)

M/S Badri Electicals (BID ID -3334250)