REPAIR OF ROOFING FLOORING TO CERTAIN MISC WORKS AT BSO YARD AT MIL STN SRI GANGANAGAR

Amount

Taking down Chowkhats or frames not exc. 1.5 sq. m each (without taking off shutter from the frames) complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc 1.50 Sqm but n. exc 4.0 sqm each complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Dismantling water tanks and removing to store Capacity 500 Ltr to 1000 Ltr complete all as specified and directed.

S&F 4.8 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 4.8 mm thick Sheet glass, ordinary quality and glazing with oil putty in square but exc 0.5 Sqm in each pane complete all as specified and directed.

M&L 12 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination fixed to aluminium frame work with aluminium snap beads, rebated or flat edged complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, but built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan, exc 6m mean radius built in CM 1:4 complete all as specified and as directed.

Taking down internal/external cement plaster on brick or concrete surfaces etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in CM 1:4 in two layers and second layer mixed with integral water proofing compound @ 2% and finished even and smooth without using extra cement as external plaster on walls complete all as specified and directed. Note : WPC measured and paid separately under respective item of BOQ.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in CM 1:6 in finished even and smooth without using extra cement as external plaster on walls complete all as specified and as directed.

Supply only Integral water proofing compound (WPC), conforming to IS and as approved, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L 450x300 x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square/rectangular) colour tile,area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed in CM 1:6 complete all as specified and as directed by Engr-in-Charge.

M&L machine cut kota stone slab flooring 20-25mm thick (minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing over and including 15mm of screed bed in CM 1:4 complete all as specified and directed.

M&L machine cut kota stone slabs as in vertical surfces such as risers of steps 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing also moulding edges over and including 10mm of backing coat in CM 1:4, complete all as specified and directed.

M&L for applying two or more coats to new surfaces of 100% premium acrylic emulsion paint having VOC less than 50gm/Litre and UV resistance as per 15489: 2004, Alkali resistance exterior paint of required shade (Company depot tinted) with silicone additives @1.43 litre/10sqm over and including priming coat of exterior primer applied @0.90 Litre/10 Sqm over new surfaces using roller complete all as specified and as directed.

M&L for preparing new interior surfaces for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/Litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification, with putty finish using roller complate all as specified and directed by the Engr-in-Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for 30 cm x 30 cm x 25 mm thick chequered cement concrete tiles set jointed and pointed in neat cement slurry in floors with grey cement over and including 15mm thick screed in CM 1:6 with pigments complete all as specified and directed by Engineer-in-Charge.

Demolition concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75 mm thick cement concrete type D2, 1:4:8, (Using 40mm graded stone aggregate) as in filling and mass concrete complete all as specified and directed.

M & L for 75mm thick cement concrete type B-2, 1:2:4, using 40mm graded stone aggregate as in plinth protection complete all as specified and as directed.

M & L for 40mm thick cement concrete type B-1, 1:2:4, using 20mm graded stone aggregate as in flooring , finishing cement concrete surface even and smooth without using extra cement all as specified and as directed by Engr-in-Charge.

M&L for sand filling (25mm thick) under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L Machine pressed precast rubber moulded concrete coloured interlocking paver block any shape and size confirming to IS 15468-2006 of 60 mm thickness with grey cement and pigment M-35 Grade complete all as specified and directed by Engr-in-Charge.

M&L providing precast cement concrete in PCC (1:2:4), type B-1, with 20 mm graded stone aggregate for kerb stone and similar works with plain fair finishes including chamfers, weatherings, throating etc. and setting in Cement Mortar (1:4) complete with joints to match complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L powder coated aluminium frames for doors, windows with one or more rebates including jointing cleats for fixing etc.including power coating minimum thickness of power coating shall be 50 micron as per the specification) complete all as specified and directed.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminum snap beading screws etc. complete all as specified and directed.

S&F powder coated aluminium windows and ventilator shutters, side hung type, without sash bars aluminium saction weighing 0.55 kg/RM including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fitting such as peg stay 150mm long (1 no) hinges type B21 100 mm long (2 Nos) suitable handle (1 No) and including aluminium grill complete all as specified and directed.

S&F in repair extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed including taking down old one complete all as specified and directed.

S&F in repair 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply and fix solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F Second class hard wood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares with plain, chamfered or rounded mitred and rebated sash bars any number & fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, section 8 clause 8.24 (a) complete all as specified and as directed by Engr-in-Charge.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F PTMT grating dome 100 mm dia (minimum weight 25 gms) complete all as specified and directed.

S&F in repair stainless Steel butt hinges medium weight of size 100 mm complete all as specified and directed.

S&F 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required and as directed including taking down old one complete all as specified and directed.

S&F chromium plated hand shower health faucet ABB body with 8 mm dia. 1.00 m long CP flexiable pipe 15 mm bore with wall hook complete all as specified and directed including taking down old one complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position capacity 1000 Ltr complete all as specified and directed.

S&F 15mm dia Pillar taps, cast copper alloy with capstan heads fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F 15mm dia bib tap, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed including taking down old one.

S&F stop cock (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed including taking down old one.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed.

S&F in repairs anodised aluminium grill, having mess size 100mmx100mm made out 4mm wide & 3mm thick aluminium section complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, AC insulation, etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets & snap grid and any description complete all as specified and directed.

M&L anodised aluminium snap grid frame work for false ceiling including Gypsum Board 12mm thick in ceiling fixed with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified screw as per manufacturers instructions complete all as specified and as directed.

M&L hollow section PVC wall lining consisting of 5mm thick wood grain printed pvc sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specification and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed by Engr-in-Charge.

Dismantling unframed timber scantlings 40 Sqcm and over in section, in fillets, rails, posts, rafters, purlins, etc. in any position of any description not otherwise provided for and removing to stores complete all as specified and as directed.

M&L for Plain cement concrete 1:4:8 type, D2, (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

S&F chain link 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire complete all as specified and as directed by Engr-in-Charge.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, grade-Fe-410- W(Gde-E-250) quality-B complete all as specified and as directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing (Fe-410- W(Gde-E-250) quality complete including taking out old one complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking up or down GI steel water tubing 15mm bore and connections including fittings from floor/walls/ ceiling complete all as specified and directed.

Taking up or down GI Steel water tubing 20mm bore and connections including fittings from floor/walls/ centrings complete all as specified and directed.

S&F Galvanised steel water tubing 15 mm bore medium grade with all fittings concealed including cutting chases to brick wall/ceiling or laying in floors and making good complete all as specified and directed.

Fixing only tubes, of 15mm bore any grade,(medium) to walls and ceilings or laying in floors complete all as specified and directed.

S & F GI steel water tubing 20mm bore medium grade with all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed.

Fixing only tubes, of 20 mm bore any grade, (medium) to walls and ceilings or laying in floors complete all as specified and directed.

S&F in repair CP towel rail 600mm long fixed with CP brass screws in wooden/PVC cleat complete all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed by Engr-in-Charge.

S&F in repair for door closer hydraulically regulated, alunimiun body designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F for floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised, with hard drawn steel spring complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern), white complete, including white seat cover with hinging arrangement, (excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.

Supply & Fix in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections etc complete all as specified and as directed.

S&F in repair for vitreous China urinals,half stall urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) and including Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. Note : Minimum weight 60 gms.

Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws , clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with rivetted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed by Engr-in-charge.

M&L two coats of oil distempering over old decorated surfaces of wall after complete removal of existing treatment including preparation of surface with putty finishes complete using roller complete all as specified and directed by Engr-in-Charge

M & L preparation of old plastered surfaces of walls and applying finishing walls with Acrylic Smooth exterior emulsion (weather coat) paint of required shade old work (one or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm complete all as specified and directed.

KHANNA CONSTRUCTIONS (BID ID -3081157)

J and P CONTRACTOR (BID ID -3094262)

PAREEK AND COMPANY (BID ID -3084373)

M/s Singla Trading Comapny (BID ID -3093090)

M J BUILDERS (BID ID -3083181)