Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹7.1 L
EMD Value
₹14,180
Closing Date
3 Feb 2020, 6:00 pmClosed
Rajesh Bhagat
xen pwd div no ii jammu
Repair Renovation of Primary Health Sub-Centre Building at Koh Pota
2020_PWDJK_91417_2
136 of 2019-2020
Open Tender
Civil Works
Item Rate
30 days
Jammu
Please refer Tender documents.
3 documents required · 3 mandatory
₹600
Yes
Treasury Challan under MH 0059 PW indicating name
₹14,180
Yes
8 Feb 2020
28 Jan 2020
4 Feb 2020
28 Jan 2020
3 Feb 2020
28 Jan 2020
Amount
Dismentalling of doors, windows and clerestory windows (steel or wood) shutter including chokhats, achitrave, holdfasts etc. complete and stacking within 50mtr lead of area beyong 3 sqm.
Demolishing cement concrete manually / by mechanical means including disposal of material within 50 meteres lead. 1:3:6 or richer mix
Demolishing brick tile covering in terracing including stacking of sevicable material and disposal of unservicable material within 50mtr lead.
Demolishing mud phaska in terracing and disposal of unservicable material within 50mtr lead.
Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
12 mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).
6 mm cement plaster to ceiling of mix 1:3 ( 1 cement : 3 fine sand)
Painting top roof with bitumen of approved quality at 17 kg per 10 sqm impregnated with a cost of coarse sand at 60 codm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete. with residual type petrolum of penetration 80/100.
10mm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar mixed with bhusa at 35kg per Cum of earth and gobri leaping with busa at 35 kg per Cum of earth and gobri leaping with mix 1:1 ( 1 clay : 1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 ( 1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat with hand moulded F.P.S bricks tiles.
Tile work in skirting, risers of steps and dedo (upto 2 m height) 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade comple . (8 mm thick)
Providing and Laying vitrified floor tiles in diffrent sizes (thickness to be specified by the manufacture) with water absorbtion less then 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (size of tile 60 x 60 cm)
Providing and laying of in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level 1:4:8, (1 cement : 4 coarse sand : 8 graded stone aggreagate 40mm nominal size) (Crushed)
Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames guard bar, ladders railings, brackets, gates & similar works kilograms
Providing and fixing 35mm panelled and glazed shutters for doors, windows and cleresory windows including ISI marked, MS. Pressed but hinges bright finished of required size with necessary crew excluding panelling which will be paid for separately, all complete as per direction of Engineer in-charge. second class deodar wood.
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked
Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float of glass panes including lSI marked M.S. pressed butt·hinges bright finished of required size with necessary screws. Second class deodar wood (35mm thick)
Providing and fixing 30 mm thick wire gauze shutters using galvanised M.S. wire gauze .of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows: lSI marked M.S. pressed but hinges bright finished butt hinges of required size with necessary screws Second class deodar wood
Providing and applying white cement based putty of average thickness 2mm of approved brand manifacture, over the plastered wall surface to prepare the surface even and smooth complete.
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work.
Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade (Old Steel work one or more coat)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10 sqm
Painting of flower and logos around the Windows & Doors. Proper branding are per Health and Wellness Centres Drawings.
Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests.
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
Making khurras 45 x 45cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete.
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: 15 mm dia. nominal bore (a) Light
Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work) 20 mm dia. nominal bore
Providing and fixing ball valve (brass) of approved quality complete 25 mm nominal bore
Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 15 mm nominal bore
Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931 15 mm nominal bore
Providing and Fixing C.P Brass Soap Tray of approved valve.
Providing and Fixing of Towel Road of approved under (450 - lay).
Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
75 mm diameter
110 mm diameter
Providing and fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised- Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 1 0 mm gap for thermal expansion.
75 mm bend
110 mm bend
Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].
Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete.
Stone agg. Below 40mm size (13.00 Kms lead)
Sand for an avg. lead of 15.00 Kms
Brick Tiles for an avg. lead of 63.00 Kms..
VINAY KUMAR
Ravinder Nath Sharma
ROMESH CHANDER
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .