Part-A:- Jhansi Division : Improvement of staff quarters & other amenities at staff quarters at stations railway colonies in STLI-DHO &BLNR-UDMR section under ADEN/GWL. Part-B:- Jhansi Division: Improvement of service buildings, roads & protection works for safety of tracks in BLNR-UDMR section under ADEN/GWL.

Item Breakup - 1-Part-A: CPWD DSR 2023 Items

prepare the surface even and smooth complete. 13.37S INTERIOR FINISHING Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 13.41 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 13.41.1 New work (two or more coats) over and Sqm 5000 185.65 928250 including water thinnable priming coat with 43 cement primer having VOC content less than 50 gram/litre 13.44S EXTERIOR FINISHING Finishing walls with water proofing cement paint 13.44 of required shade : 13.44.1 New work (Two or more coats applied @ 3.84 Sqm 5000 116.9 584500 44 kg/10 sqm) Painting with synthetic enamel paint of 13.61 approved brand and manufacture to give an even shade : 45 13.61.1 Two or more coats on new work Sqm 2000 155.9 311800 Finishing walls with water proofing cement paint 13.109 of required shade : 13.109.1 Old work (one or more coats applied @ 2.20 Sqm 8000 112.9 903200 kg/10 sqm) over priming coat of primer applied 46 @ 0.80 litrs/10 sqm complete including cost of Priming coat. 14.0 REPAIRS TO BUILDING 14.1S General JHANSI DIVISION-ENGG/NORTH CENTRAL RLY Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm 14.2 nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 47 14.2.1 Door chowkhats Each 50 1782.55 89127.5 48 14.2.2 Window chowkhats Each 50 1125.15 56257.5 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface 14.4 including disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in- Charge. 49 14.4.1 For door/ window/ clerestory window Sqm 50 1264.35 63217.5 Renewing glass panes, with putty and nails 14.5 wherever necessary including racking out the old putty: 14.5.1 Float glass panes of nominal thickness 4 mm Sqm 50 1090.65 54532.5 50 (weight not less than 10kg/sqm) 14.75AS ROUTINE MAINTENANCE WORK 14.82 Dismantling W. C . Pan of all sizes including Each 50 134.1 6705 disposal of dismantled materials including 51 malba all complete as per directions of Engineer-in-Charge. Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25 degreeC, 0.87-0.89 kg/ litre and viscosity 70- 160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface 14.91 complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23 degreeC as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150 degreeC. Cold flexibility shall be upto -2 degreeC when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 52 14.91.1 3 mm thick Sqm 500 560.95 280475 15.0 DISMANTLING AND DEMOLISHING 15.1S General Demolishing cement concrete manually/ by mechanical means including disposal of 15.2 material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (including cum 10 2434.25 24342.5 53 equivalent design mix) JHANSI DIVISION-ENGG/NORTH CENTRAL RLY Demolishing brick work manually/ by mechanical means including stacking of 15.7 serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 54 15.7.4 In cement mortar cum 100 2060.2 206020 Dismantling doors, windows and clerestory windows (steel or wood) shutter including 15.12 chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 55 15.12.1 Of area 3 sq. metres and below Each 50 367.2 18360 Taking out doors, windows and clerestory 15.13 window shutters (steel or wood) including stacking within 50 metres lead : 56 15.13.1 Of area 3 sq. metres and below Each 20 143.5 2870 15.18 Dismantling steel work in built up sections in Kg 1000 5.65 5650 angles, tees, flats and channels including all 57 gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. Dismantling roofing including ridges, hips, 15.28 valleys and gutters etc., and stacking the material within 50 metres lead of: 58 15.28.2 Asbestos Cement sheet Sqm 200 77.3 15460 15.52 Dismantling of flushing cistern of all types Each 50 112.05 5602.5 (C.I./PVC/Vitreous China) including stacking of 59 useful materials near the site and disposal of unserviceable materials within 50 metres lead. 15.56 Dismantling old plaster or skirting raking out Sqm 5000 54.65 273250 joints and cleaning the surface for plaster 60 including disposal of rubbish to the dumping ground within 50 metres lead. 15.60 Disposal of building rubbish / malba / similar cum 200 263.95 52790 unserviceable, dismantled or waste materials by mechanical means, including loading, 61 transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts involved. 17.0 SANITARY INSTALLATIONS 17.1S General Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.1 manually controlled device (handle lever) conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of Each 50 6767.4 338370 62 size 580x440 mm with integral type foot rests Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.2 manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic Each 25 6515.55 162888.75 63 seat and lid JHANSI DIVISION-ENGG/NORTH CENTRAL RLY Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing 17.4 cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4.1 One urinal basin with 5 litre white P.V.C. Each 20 6258.75 125175 64 automatic flushing cistern 17.7B Providing and fixing wash basin with C.I. Each 20 1550.6 31012 brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and 65 making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, 17.10 including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board 66 17.10.1.1 510x1040 mm bowl depth 250 mm Each 25 6945.6 173640 17.29 Providing and fixing 100 mm sand cast Iron Each 50 53.25 2662.5 67 grating for gully trap. Providing and fixing mirror of superior glass (of approved quality) and of required shape and 17.32 size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 68 17.32.2 Rectangular shape 453x357 mm Each 50 1361.8 68090 17.34 Providing and fixing toilet paper holder : 69 17.34.1 C.P. brass Each 50 803.7 40185 Providing and fixing PTMT Bottle Trap for Wash 17.70 basin and sink. 17.70.2 Bottle trap 38 mm single piece moulded with Each 50 375.65 18782.5 height of 270 mm, effective length of tail pipe

77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms 17.72 Providing and fixing PTMT towel ring trapezoidal Each 50 231.95 11597.5 shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face 71 with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP 17.73 brass screws with concealed fittings arrangement of approved quality and colour. 17.73.1 450 mm long towel rail with total length of 495 Each 50 673.4 33670 72 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms 17.73.2 600 mm long towel rail with total length of 645 Each 50 708.95 35447.5 73 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES JHANSI DIVISION-ENGG/NORTH CENTRAL RLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one 18.8 step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 74 18.8.2 20 mm nominal dia Pipes Metre 500 537.6 268800 75 18.8.3 25 mm nominal dia Pipes Metre 500 627.25 313625 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes 18.9 jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 76 18.9.6 50 mm nominal dia Pipes Metre 1000 794.25 794250 18.15S BRASS FITTINGS Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 77 18.18.2 20 mm nominal bore Each 100 462.5 46250 Providing and fixing C.P. brass shower rose with 18.22 15 or 20 mm inlet 78 18.22.2 150 mm diameter Each 100 222.35 22235 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Per 10000 11 110000 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable locking 79 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass angle valve for 18.53 basin mixer and geyser points of approved quality conforming to IS:8931 80 18.53.1 15mm nominal bore Each 100 574.3 57430 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of approved 18.54 quality and colour. 18.54.1 15 mm nominal bore, 86 mm long, weighing not Each 100 125.6 12560 81 less than 88 gms Providing and fixing PTMT grating of approved 18.58 quality and colour. 18.58.1 Circular type 82 18.58.1.1 100 mm nominal dia Each 100 37.6 3760 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy 18.62 coated aluminium rod with L.P./ H.P.H.D. plastic ball. 18.62.2 20 mm nominal bore, 120 mm long, weighing Each 100 257.6 25760 83 not less than 198 gms 18.63 Providing and fixing PTMT angle stop cock 15 Each 100 156.9 15690 84 mm nominal bore, weighing not less than 85 gms 19.0 DRAINAGE JHANSI DIVISION-ENGG/NORTH CENTRAL RLY 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement 19.1 mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 85 19.1.3 200 mm diameter Metre 500 970.35 485175 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm 19.7 nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm 19.7.1 internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.7.1.1 With common burnt clay F.P.S. (non modular) Each 30 12770.55 383116.5 86 bricks of class designation 7.5 19.8 Extra for depth for manholes : 19.8.2 Size 120x90 cm 19.8.2.1 With common burnt clay F.P.S. (non modular) Metre 10 10585.5 105855 87 bricks of class designation 7.5 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with 21.1 required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.2 Powder coated aluminium (minimum thickness Kg 200 530.9 106180 88 of powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 400 598.6 239440 89 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) JHANSI DIVISION-ENGG/NORTH CENTRAL RLY Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness Sqm 70 1505.25 105367.5 90 (weight not less than 12.50 kg/sqm) 22.0 WATER PROOFING 22.1S General 22.14 Grading roof for water proofing treatment with 22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse cum 100 8042.3 804230 91 sand : 4 graded stone aggregate 20 mm nominal size) 26.0 NEW TECHNOLOGIES AND MATERIALS 26.73S PREFAB/PRECAST TECHNOLOGY Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having 26.86 minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). 92 26.86.3 Frame size 50 x 100 mm Metre 500 947.7 473850 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw 26.87 withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. 93 26.87.1 30 mm thick Sqm 150 4346.7 652005 Total 39605422.25

Item Breakup - 2-Part-A: IRUSSOR 2021 Items

JCB Backhoe Loaders 3DX Plus or similar with Hour minimum 1.10 cum bucket capacity

Tractor with Trolley for local transportation or Hour other misc. works. Total 99528.00

Item Breakup - 3-Part-B: CPWD DSR 2023 Items

Item Breakup - 4-Part-B: IRUSSOR 2021 Items

JCB Backhoe Loaders 3DX Plus or similar with Hour minimum 1.10 cum bucket capacity

Tractor with Trolley for local transportation or Hour other misc. works. Total 59798.50