GE863/EWS-T-33 OF 2021-22

Amount

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings complete all as specified and directed.

S & F of 0.63 mm thick galvanized corrugated iron (CGI) sheeting with two corrugation side lap using grade of zinc coating -275. inclusive of both sides, fixed with ‘L’ or ‘J’ type hooks or cranked hook / bolts and washers as in roof covering etc. complete all as specified and directed.

Ditto but except sheet

Dismantling mild steel work of any description not otherwise provided complete all as specified and directed.

S & F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W including cleats,distance pieces etc complete all as specified and directed.

S & F Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290 grade E 165 complete all as specified and directed.

M&L for two coats synthetic enamelled paint over one coat of red oxide primer incl preparation of new surface of steel of any description over 10cm width or girth complete all as specifed and as directed

M&L for one coats synthetic enamelled paint incl preparation of old steel surfaces of any description over 10cm width or girth complete all as specifed and as directed

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed.

M & L 6 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in partitions/ shutters, ceiling etc complete all as specified and directed.

S & F Second class hard wood plain fillets, square, rectangular or triangular in section, secured with screws, cross sectional area exceeding 3 and not exceeding 6 Sq. cm complete all as specified and directed.

Ditto as per item no-11 but bullnosed splayed with chamfered or rounded on one edge or face

M & L 18/19 mm thick one side prelaminated Particle board,and other side balancing white lamination, exterior grade, and fixed with screws to timber frame work in cup board shutters/ shelves complete all as specified and directed.

Dismantling of framed fillets, rails, posts, rafters, purlins etc., under 40 Sq. Cm in section complete all as specified and directed.

M&L 2nd class hard wood in scantling timber framed work fixed clean sawn complete all as specified and directed.

Taking down chowkat or frames exc 1.5 sqm but n. exc 4 sqm each (w/o taking of shutters from the frame ) complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L Plain Cement Concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in filling of pressed steel frame and hold fast block etc. complete all as specified and directed.

S & F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. for windows and ventilators etc complete all as specified and directed.

S & F Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F Steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21 complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F of aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specifed and as directed

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

M&L preparation of old painted wooden surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality complete all as specified and directed.

M&L preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with one coats of creosote oil complete all as specified and directed.

S & F in repair 20 mm dia aluminium alloy anodised curtain rails with brackets complete all as specified and directed.

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base of flooring/ hard standing complete all as specified and directed.

M &L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) as in sub base in floors complete all as specified and directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including screed bed or bedding layer 15 mm thick, in cement morter 1:4 for laying floor finishes to receive floor tiles/granite complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick laid over and including 20 mm thick cement screed bed in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L 20-25mm thick machine cut kota stone slab in riser of steps, skirting,dado and pillar laid over and including cement screed base 15 mm thick in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S & F Chequered cement concrete tiles 25 cmx 25 cmx 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors laid over & including screed bed or bedding layer of 20 mm thick in cement mortar 1:4 for laying floor finished to receive floor tiles/granite complete all as specified and directed.

M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protections, finished even and smooth w/o using extra cement complete all as specified and directed.

Providing, cement concrete Type B1 1:2:4 (20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Granite (of any type) 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like laid over & including screed bed or bedding layer 20 mm thick in cement mortar 1:4 for laying floor finished to receive floor tiles/granite including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 350 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over & including rendering 10mm thick in cement mortar 1:4 on stone masonry surfaces or surfaces other than fair face of brick work to receive glazed tiles/granite complete all as specified and directed.

Demolition of PCC block masonry, any type, set in cement mortar complete all as specified and directed.

Demolition of stone /boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but including ashlar facings, dressed stonework complete all as specified and directed.

M&L Pre - cast cement concrete 1:3:6 type C-1, (20mm graded stone aggregate) block masonary with solid blocks built in cement mortar 1:6 complete all as specified and directed.

M&L for walling of random rubble stone masonry uncoursed well bonded bedded and solidly hearted built in CM 1:6 complete all as specified and as directed.

M&L precast PCC 1:3:6 type C1 (using 20mm graded stone agg) as in bonder stones set in cement mortar 1:6 complete all as specified and as directed

Taking down cement plastering at any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed.

M & L rendering 15mm thick on fair faces of concrete surfaces in CM 1:6 incl finished even and smooth without using extra cement complete all as specified and directed.

M & L rendering 15mm thick on fair faces of concrete surfaces in CM 1:4 incl finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick on stone masonary surfaces in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed.

M&L PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in coping to rataining wall/drainage complete all as specified and as directed .

M&L for preparing New plastered surfaces and applying two coats of distemper oil emulsion on surfaces of walls complete all as specified and directed.

M&L for preparation of surfaces of new plaster surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

Material & labour for preparation of old surfaces and & applying one coat of oil bound distemper complete all as specified and directed .

M&L for preparation of old plastered surface of walls and applying one coats of cement base paint complete all as specified and directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Precast cement concrete 1:3:6, type C1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., securing with clips complete all as specified and directed.

Mild steel TMT 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for stirrups, hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

Dismantaling of water tanks and removing to store, capacity exc 500 liters but n. exc 1000 ltrs complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position inc 20mm bore PVC float valve complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 15 mm bore dia complete all as specified and directed.

Ditto but 20 mm bore dia .

S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

S & F in repairs 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S &F in repairs of brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs Towel Rail 600 mm long of PTMT fixed with and including Chromimum plated brass screws and wooden plastic cleats (Min weight 190 gms) complete all as specified and directed.

S & F in repair Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard ,and railing 60 cm long complete all as specified and directed.

S&F in repairs PVC Connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair Wash basins 550x400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fittings complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete all as specified and directed.

M&L PVC (SWR) floor trap , plain with grating including jointing with solvent cement 75 mm dia complete all as specified and directed.

S&F 32 mm dia low density polyethylene pipe (LDPE) of pressure rating @ 6Kgf/sqcm fixed to walls, ceilings or in floors etc. complete all as specified and directed.

S & F 50 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/ Sq. Cm., fixed complete to walls, ceilings or in floors etc.

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation in hard/ dense soil and getting out complete all as specified and directed.

Demolition and breaking up drain pipes , 100 mm dia (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L Concrete bed to drain pipe 100mm dia incl. packing under and haunching against the sides of pipe of PCC 1:4:8 type D2 complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and directed.

Returning filling in including spreading, levelling , watering and well ramming n exc. 25 cm in layers (Soil) complete all as specified and directed.

Removal of excavated surplus (soils) at a distance exc. 1.5 Km but n. exc 5.0 Km complete all as specified and directed.

Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith compete fittings such as switches ,ceiling rose, pendent holder, sketch fitting & regulator etc. including making good to the disturbed surfaces of wall, roof and floor etc. to match with the existing surfaces complete all as specified and directed .

Taking down unserviceable submain wiring and service cable alongwith batten /PVC conduits etc. and making good disturbed surfaces of walls/floors and match the existing surface complete all as specified and directed.

Taking down unserviceable main switches, DBs with MCB SP/Isolators by unscrewing form board complete all as specified and directed .

M&L for point wiring complete with stranded copper conductor 1.5 Sqmm size (Nominal area) Multistranded FRLSH 1100 volt PVC insulated unsheathed cable in and including concealed PVC conduit ISI marked not less than 20mm dia with concealed sunk in pressed steel terminal boxes of reqd size of thickness 1.2 mm factory made and painted with stove enameled black paint with top cover 2mm thick plastic laminated sheet of required colour fixed with brass screws and cup washer including 1.5 sqmm multistrand copper conductor PVC insulated cable of green colour as earth continuity connected to common earth dolly and all sunk/terminal boxes and each fitting/fixture, complete with all accessories complete all as specified and directed.

All as per Srl item No 94 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the independent board with other switches with cables 1.5 Sqmm .

All as per Srl item No 94 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the same board with other switches with cables 1.5 Sqmm .

All as per Srl item No 94 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with cable 2.5sqmm including provision of 1.5 sqmm single core multistanded PVC insulated copper conductor as earth conducting conductor .

S&F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

Supply and fixing switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed .

Supply and fixing socket outlet 3 pin 15 Amp 2-in-one 230 Volt flush type complete all as specified and directed .

Supply and fixing socket outlet 3 pin 5 Amp 2-in-one 230 Volt flush type complete all as specified and directed .

Supply and fixing switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed .

M&L for Ceiling rose, 3 terminal with ISI mark complete all as specified and directed.

Supply and fixing in replacement of Ceiling & wall mounted LED 1X16/20W flameproof LED tube light cool day type system with all accessories complete all as specified and directed. Make: Crompton Cat Part No-EXTN1LT8-16/20 or equivelent in Havells/CG/Philips/Bajaj as approved.

Supply and fixing in replacement of surface & wall mounted LED 20W tube light fitting batten 4 feet with extruded aluminium housing and robust construction 20W system lumen with all accessories complete all as specified and directed. Make: Bajaj Cat No. BLRB-DB 118 or equivalent of Wipro/CG/Philips/Havells as approved

M & L for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten / angle fittings with and including 7 Watts LED lamp of approved make complete all as specified and directed.

Supply & Fixing in replacement of flameproof LED bulk head light 60 W incl die cast aluminium housing with heat resistance toughened glass of IP 65 protection complete all as specified and directed. Make Cromptonj Cat No FWL1315-60-CDL or equivalent of Wipro and CG/Philips as approved

S&F in replacement of 2'x2' LED flat panel 36W for Surface/Suspended mounting which provides soft-light and glare free symmetrical illumination complete all as specified and directed. MAKE: Crompton cat No LCTLRN-36-FO-CDL or equivalent in philips/Havells/Bajaj as approved.

S&F in replacement exhaust fan, steel body , heavy duty, AC, Single Phase 300mm sweep, with louvre complete all as per specified and directed . NOTE: Old exhaust fan shall be govt property and deposited in AGE E/M store yard by the contractor and same shall be taken on charge by the Engineer-in- Charge.

Supply and fixing in replacement electric water heater,storage type, rust proof powder coated steel body ,with copper inner tank and heating element upto 2 KW ,capacity 25 litre, BEE 5 Star rated, electric operated 230 V, Single Phase complete with all accessories such as safety valve, thermostate, NRV, connection piece, multifunctional safety valve, automatic thermal cut out, fusible plug, anti vacum sys, built in presser release valve,thermostat, indicator lamps and all safety devices including provn of grouting bolts in walls including CP brass pillar cock 15 mm , pvc connection etc and making good to disturbed surfaces complete all as specified and directed . NOTE: Old water heater/ gyser shall be govt property and deposited in AGE E/M store yard by the contractor and same shall be taken on charge by the Engineer-in- Charge.

Supply and fix Sheet metal enclosure for DBs 8 way, double door, 240 Volt, with 200 Amps rates bus bar complete all as specified and directed.

Supply and fix Sheet metal enclosure for DBs 4 way, double door, 240 Volt, with 200 Amps rates bus bar complete all as specified and directed.

Supply and fixing in replacement of miniature circuit breaker (MCB) SPN 40 Amp rating 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and directed .

Supply and fixing in replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing Submain wiring alongwith earth wire with sizes 2 X 6.00 Sqmm and 01 X 2.5 Sqmm for earth of FR PVC insulated copper conductor, Single core cable in surface/recessed as required complete all as specified and directed.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 16 Sqmm complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I,connected to earthing test point all as specified or indicated including testing on completion ,necessary excavation, earthwork, PCC works in 1:2:4 type B-1, form work and CI earth pit cover with watering pipe 20 mm dia GI Pipe medium grade, funnel with wire mesh and lugs, GI Pipe of 15 mm dia of light grade for protection of earth wire including taking out old earthing complete all as specified and directed.

Net Contract Sum will be after deducting Sch Of Credit of Rs. 45167.28

Pankaj Builders

M/S PYARE LAL

M/S SHIV NATH ENTERPRISES

M/S Gulab Singh

R B TRADERS

m/s jupiter builders